Manuel d'utilisation / d'entretien du produit PT-LC75E du fabricant Panasonic
Aller à la page of 28
ENGLISH R Before operating this product, please read the instructions carefully and save this manual for future use. LCD Pr ojector Operating Instructions Model No.
2-E NGLISH E NGLISH -3 Preparation IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug.
E NGLISH -5 Preparation Precautions with regar d to saf ety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet.
E NGLISH -7 Preparation 6-E NGLISH During a thunderstorm, do not touch the projector or the cable. B Electric shocks can result. Do not use the projector in a bath or shower. B Fire or electric shocks can result. Do not look into the lens while the projector is being used.
E NGLISH -9 Preparation 8-E NGLISH When inserting the battery, make sure the polarities (+ and -) are correct. B If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
E NGLISH -11 Preparation 10-E NGLISH About the screen If the screen you are using is dirty, damaged or discoloured, attractive projections cannot be obtained. Do not apply any volatile substances to the screen, and do not let it become dirty or damaged.
E NGLISH -13 Preparation 12-E NGLISH # Air outlet port Do not cover this port. W ARNING Do not bring your hands or other objects close to the air outlet port. B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result.
E NGLISH -15 Preparation 14-E NGLISH B The wireless remote control and the projector itself have the same control buttons available. # RGB INPUT indicator (page 17) This indicator shows whether a signal is being input to the RGB input connectors (RGB 1 IN/RGB2 IN).
E NGLISH -17 Preparation 16-E NGLISH <Connector panel> & % ' ( $ # # SERIAL connector (pages 20, 21 and 40) This connector is used to connect a personal computer to the projector in order to externally control the projector.
E NGLISH -19 Preparation 18-E NGLISH Inser ting the battery Insert the lithium battery which is supplied with the remote control unit, making sure that the polarities are correct. # While pushing the battery holder tab to the right, pull out the battery holder.
E NGLISH -21 Preparation 20-E NGLISH DVD player Example of connecting to video equipment D-sub 15 (male) - BNC5 (female) adapter cable (sold separately, ET-ADBNC) Red (connect to P R signal connector).
E NGLISH -23 Preparation 22-E NGLISH Setting-up Pr ojection methods The projector can be set up so that any one of the following four projection methods are used. Select whichever projection method matches the setting- up method. (The projection method can be set from the OPTION2 menu.
Basic Operation E NGLISH -25 24-E NGLISH T urning off the po wer # Hold down the POWER button for at least 0.5 seconds or press the POWER button twice to turn off the power. The lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange.
E NGLISH -27 Basic Operation 26-E NGLISH When an S-VIDEO/VIDEO signal is being input PICTURE PICTURE MODE STANDARD COLOR 32 TINT 32 BRIGHT 32 CONTRAST 32 SHARPNESS 0 COLOR TEMP.
E NGLISH -29 Basic Operation 28-E NGLISH Returning a setting to the factory default If you press the STD (standard) button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed.
E NGLISH -31 Basic Operation 30-E NGLISH Using the D .ZOOM (digital zoom) function This function lets you enlarge a single section of the picture. Furthermore, the spot display mode which is used to select the section which is to be enlarged can also be used when making presentations.
I button to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.) SHARPNESS Press the H button to make the picture details sharper, and press the I button to make the picture details softer.
AUTO (S-VIDEO only) When an S1 video signal is input to the S-VIDEO terminal, the aspect ratio is changed automatically to project a 16:9 picture. 4:3 The input signal is projected without change. 16:9 The picture is compressed to a ratio of 16:9 and projected.
Use the F and G buttons on the projector or remote control unit to select an item, then press the I or H buttons to change the setting. OSD ON The current input name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the current input name to be displayed.
E NGLISH -39 Adv anced Operation 38-E NGLISH Changing the displa y langua ge Indicates the language which is currently set Use the F and G buttons on the projector or remote control unit to select a language, then press the ENTER button to accept the setting.
E NGLISH -41 Adv anced Operation 40-E NGLISH Using the SERIAL connector The serial connector which is on the side connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.
E NGLISH -43 Others 42-E NGLISH Indicator s There are two indicators on the control panel of the projector which give information about the operating condition of the projector.
E NGLISH -45 Others 44-E NGLISH Replacing the lamp unit W arning The lamp unit should only be replaced by a qualified technician. When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and contact with it can cause burns.
E NGLISH -47 Others 46-E NGLISH Lamp unit replacement pr ocedure NOTE: B If the lamp usage time has passed 2000 hours (when LAMP POWER has been set to “ HIGH ” ), the projector will switch to standby mode after approximately 10 minutes of operation.
E NGLISH -49 Others 48-E NGLISH Remote control unit does not operate. The picture does not display correctly. Picture from computer does not appear Bef ore asking f or service Before asking for service, check the following points. Problem Possible cause Power does not turn on.
E NGLISH -51 Others 50-E NGLISH Connectors RGB IN/OUT: Dual-line D-SUB HD 15-pin (female) (One-line is available for input and output) During YP B P R input/output: Y: 1.0 V [p-p], 75 Ω P B ,P R : 0.7 V [p-p], 75 Ω During RGB input/output: R.G.B.: 0.
E NGLISH -53 Others 52-E NGLISH Dimensions <Units: mm ( ˝ )> TEMP LAMP RGB INPUT INPUT AUTO SETUP POWER STANDBY(R) ON(G) MENU ENTER 57(2-7/32) 310(12-3/16) 198(7-25/32) 49(1-15/16) 4.5(5/32) 85.5(3-11/32) 243(9-9/16) Appendix List of compatible signals *1 The “ i ” appearing after the resolution indicates an interlaced signal.
54-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac kno wledgements B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh is a registered trademark of Apple Computer, Inc. B S-VGA is a registered trademark of the Video Electronics Standards Association.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic PT-LC75E c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic PT-LC75E - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic PT-LC75E, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic PT-LC75E va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic PT-LC75E, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic PT-LC75E.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic PT-LC75E. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic PT-LC75E ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
