Manuel d'utilisation / d'entretien du produit PT-LB10NTU du fabricant Panasonic
Aller à la page of 33
ENGLISH R Before operating this product, please read the instructions carefully and save this manual for future use. LCD Pr ojector Operating Instructions Model No. PT -LB10NTU PT -LB10U PT -LB10VU PT -LB10SU PT -LB10SVU TQBJ 0156 Commer cial Use ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D.
2-E NGLISH E NGLISH -3 Preparation IMPOR T ANT SAFETY NO TICE Dear P anasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector.
E NGLISH -5 Preparation 4-E NGLISH Contents Preparation IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety .........................................6 Accessories ...............................10 Before use ................................
E NGLISH -7 Preparation 6-E NGLISH B If the power cord is used while damaged, electric shocks, short-circuits or fire may result. B Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary. Do not handle the power cord plug with wet hands.
E NGLISH -9 Preparation 8-E NGLISH Do not short-circuit, heat or disassemble the batteries or place them into water or fire. B Failure to observe this may cause the batteries to overheat, leak, explode or catch fire, and burns or other injury may result.
E NGLISH -11 Preparation 10-E NGLISH Bef ore use Caution when mo ving the pr ojector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag.
E NGLISH -13 Preparation 12-E NGLISH Location and function of each part # Projector control panel (page 16) $ Zoom ring (page 25) % Focus ring (page 25) & Security lock This can be used to connect a commercially-available theft-prevention cable (manufactured by Kensington).
.
E NGLISH -17 16-E NGLISH Preparation Menu operation <on connector panel:page 15> Remote contr ol unit FREEZE SHUTTER INDEX WINDOW PROJECT OR STD AUT O SETUP INPUT POWER MENU ENTER VIDEO RGB VOLUME D .
% $ # E NGLISH -19 Getting started 18-E NGLISH Setting-up Pr ojection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the “OPTION2” menu.
H1 L L SH SW 81.2 (3-3/16) E NGLISH -21 Getting started 20-E NGLISH Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the power supply for all peripheral devices before making any connections.
.
ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D .ZOOM STD VIDEO INPUT POWER RGB MENU AUTO SETUP ) * $ & ( ' # E NGLISH -25 Basic Operation T urning on the power Before turning on the power 1, Ensure that all peripheral devices are connected properly.
FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D .ZOOM STD VIDEO INPUT POWER RGB MENU AUTO SETUP ENTER.
E NGLISH -29 Useful functions 28-E NGLISH Correcting ke ystone distor tion and automatic positioning (A UT O SETUP) This projector detects its degree of tilt and the input signal. Keystone distortion and the position of the image can then be corrected automatically in accordance with the input signal.
E NGLISH -31 Useful functions 30-E NGLISH ENTER INDEX WINDOW PROJECTOR VOLUME STD VIDEO INPUT POWER RGB MENU AUTO SETUP SHUTTER FREEZE D.ZOOM.
E NGLISH -33 Adjustments and settings 32-E NGLISH On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus. The general arrangement of these menus is shown below.
E NGLISH -35 Adjustments and settings 34-E NGLISH # Press the MENU button. The “ MAIN MENU ” will be displayed. $ Press the F F or G G button to select an item. Selected item will be displayed in blue. % Press the ENTER button to accept the selection.
E NGLISH -37 Adjustments and settings 36-E NGLISH Correcting ke ystone distor tion Keystone distortion is corrected automatically when the projector ’ s automatic setup function is used, but this correction will not apply if the screen itself is tilted.
SIGNAL MODE (RGB/YP B P R /NETWORK only) This displays the type of signal which is currently being projected. Refer to the list on page 60 for details on each type of signal. sRGB is an international color reproduction standard (IEC61966-2- 1) established by the International Electrotechnical Commission (IEC).
E NGLISH -41 Adjustments and settings 40-E NGLISH Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment.
E NGLISH -43 Adjustments and settings 42-E NGLISH RESIZING This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 60 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected.
E NGLISH -45 Adjustments and settings 44-E NGLISH A UT O SEARCH This should normally be set to “ON” ON When the power is turned on and “AUTO SETUP” is running, the projector detects which signals are being input and uses these signals for projection.
46-E NGLISH LAMP R UNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 54, and reset “LAMP RUNTIME” to “0”. FUNC 1 This assigns a function to the FUNC1 button of the ET-RM300 wireless remote control unit (sold separately).
E NGLISH -49 48-E NGLISH TEXT DISPLA Y You can set text to be displayed at the bottom of the projected image at all times. ON “TEXT DISPLAY” is enabled. OFF “TEXT DISPLAY” is disabled. TEXT CHANGE The text which is displayed when “TEXT DISPLAY” is set to “ON” can be changed.
.
E NGLISH -53 Care and maintenance 52-E NGLISH Replacing the lamp unit W arning The lamp unit should only be replaced by a qualified technician. When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and contact with it can cause burns.
B A E NGLISH -55 Care and maintenance 54-E NGLISH + Press the ENTER button to display the “OPTION2” menu, and then press the F or G button to select “LAMP RUNTIME”. , Press and hold the ENTER button for approximately 3 seconds. The “LAMP RUNTIME” will change to “TIME RESET [POWER OFF]”.
E NGLISH -57 Care and maintenance 56-E NGLISH The picture does not display correctly. Picture from computer does not appear. Problem Possible cause B The signal format (“TV-SYSTEM”) may not be set correctly. B There may be a problem with the video tape or other signal source.
E NGLISH -59 Others 58-E NGLISH Y: 1.0 V [p-p] (Including sync), 75 Ω P B , P R : 0.7 V [p-p], 75 Ω During RGB input/output: R.G.B.: 0.7 V [p-p], 75 Ω G.SYNC: 1.0 V [p-p], 75 Ω HD/SYNC: TTL, automatic positive/negative polarity compatible VD: TTL, automatic positive/negative polarity compatible VIDEO IN: Single-line, RCA pin jack 1.
Others 60-E NGLISH Appendix *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected.
E NGLISH -63 Others 62-E NGLISH Using the SERIAL connector The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.
These Operating Instructions are printed on recycled paper. T rademark ac kno wledgements B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh is a registered trademark of Apple Computer, Inc. B S-VGA is a registered trademark of the Video Electronics Standards Association.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic PT-LB10NTU c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic PT-LB10NTU - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic PT-LB10NTU, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic PT-LB10NTU va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic PT-LB10NTU, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic PT-LB10NTU.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic PT-LB10NTU. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic PT-LB10NTU ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
