Manuel d'utilisation / d'entretien du produit PT-AE900U du fabricant Panasonic
Aller à la page of 36
ENGLISH TQBJ 0182 LCD Pr ojector Operating Instructions Model No. PT -AE900U R Before operating this product, please read the instructions carefully and save this manual for future use. For assistance, please call : 1-888-View-PTV(843-9788) or send e-mail to : consumerproducts@panasonic.
2-E NGLISH IMPOR T ANT SAFETY NO TICE Dear P anasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector.
E NGLISH -5 Preparation 4-E NGLISH Contents Preparation IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety .........................................6 Accessories ...............................10 Before use ................................
E NGLISH -7 Preparation 6-E NGLISH Precautions with regar d to saf ety W ARNING If you notice smoke, strange smells or noise coming from the projector, disconnect the power cord plug from the wall outlet. B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.
E NGLISH -9 Preparation 8-E NGLISH Do not look into the lens while the projector is being used. B Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. B Be especially careful not to let young children look into the lens.
E NGLISH -11 Preparation 10-E NGLISH Accessories Check that all of the accessories shown below have been included with your projector. Bef ore use Cautions regar ding setting-up Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents.
E NGLISH -13 Preparation 12-E NGLISH Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
14-E NGLISH E NGLISH -15 Preparation Connector panel #$ % & ' ) ( # SERIAL connector (pages 22, 23, 24 and 66) This connector is used to connect a personal computer to the projector in order to control the projector externally. (RS-232C compatible) $ HDMI IN connector (page 23) This connector is used to input HDMI signals.
E NGLISH -17 Preparation 16-E NGLISH *) ( & ' #% & $ ) ( & * . / - 2 3 + 7 4 5 6 0 1 , ' Pr ojector contr ol panel Remote contr ol unit & Arrow ( F F , G G , I I and H H ) buttons (page 42) These buttons are used to select and adjust items in the on-screen menus.
L L SH SW 82.9 mm (3-1/4 ˝ ) E NGLISH -19 Pr ojection distances NOTE: B The dimensions in the table above are approximate. B For details about projected image distances, refer to page 69. NOTE: B Place the projector so that it is vertical to the screen.
E NGLISH -21 Getting started 20-E NGLISH Setting up range using the lens shift function This projector can be placed in various places by controlling the shift lever at the front side of the projector to move the lens in order to adjust the position of the projected image.
E NGLISH -23 Getting started 22-E NGLISH Connecting to video equipment NOTE: B Be sure to use an HDMI cable which conforms to HDMI specifications. If inappropriate cables are used, the connected equipment may not operate correctly.
E NGLISH -25 Getting started 24-E NGLISH To RGB output Operating range If the remote control unit is held so that it is facing directly in front of the remote control signal receptor, the operating range is within approximately 7 m (23´) from the surfaces of the receptor.
E NGLISH -27 Basic operation Press the input select b utton to select the input signal. B A picture will be projected in accordance with the selected input signal. Follow the procedure below when you set the projector up first, and when you change the setup place.
E NGLISH -29 Basic operation 28-E NGLISH NOTE: B During projection of an image, the cooling fan will operate, emitting a small noise as it operates. This noise may change depending on the ambient temperature. Turning the lamp on or off will cause this noise to increase a little.
E NGLISH -31 Useful functions 30-E NGLISH Setting the aspect ratio (ASPECT) This projector allows you to change the aspect ratio to match the type of input signal. JUST 4:3 16:9 14:9 ZOOM1 ZOOM2 4:3 16:9 V SCROLL * “ V SCROLL ” cannot be set when a VGA or SV GA signal is being input.
E NGLISH -33 Useful functions 32-E NGLISH T urning on the b utton lights (LIGHT) Press the LIGHT button. B The buttons on the remote control unit will be illuminated. B Press the LIGHT button again to turn off the button lights. The button lights will be turned off automatically when no buttons on the remote control unit are pressed for 10 seconds.
E NGLISH -35 Useful functions 34-E NGLISH NOTE: B Only the settings saved in the “ MEMORY SAVE ” menu will be displayed in the “ MEMORY LOAD ” menu. (Refer to page 47.) B The “ MEMORY LOAD ” menu will be displayed. B Press the F or G button to select the setting you want to retrieve, then press the ENTER button.
E NGLISH -37 Useful functions 36-E NGLISH CURSOR You can select a color in the projected image, and adjust the color settings. Press the ENTER button to display the cursor ( B ). # Select the color you want to adjust with the cursor. B Press the F , G , I and H buttons to move the cursor, and then press the ENTER button.
E NGLISH -39 Useful functions 38-E NGLISH NOTE: B After saving the adjusted settings, the “ PROFILE ” setting will automatically change to the setting saved in the “ PROFILE SAVE ” menu. If you continue to adjust colors to make other profiles, change the “ PROFILE ” setting to “ NORMAL ” manually.
On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus.
42-E NGLISH E NGLISH -43 Adjustments and settings & Press the F F or G G button to select an item, and then press the I I or H H button to adjust the value or change the setting. For items with selective setting or a bar scale, the individual adjustment screen will be displayed as shown below.
E NGLISH -45 Adjustments and settings 44-E NGLISH Adjusting the picture # Press the MENU button to display the menu screen. $ Select the “PICTURE” menu from the main menu, and then press the ENTER button. % Press the F or G button to select an item.
E NGLISH -47 Adjustments and settings 46-E NGLISH TV -SYSTEM (S-VIDEO/VIDEO only) This should normally be set to “AUTO”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.
E NGLISH -49 Adjustments and settings 48-E NGLISH Adjusting the position # Press the MENU button to display the menu screen. $ Select the “POSITION” menu from the main menu, and then press the ENTER button. % Press the F or G button to select an item.
50-E NGLISH Adjustments and settings A UT O SETUP (PC only) “H-POSITION”, “V-POSITION”, “DOT CLOCK” and “CLOCK PHASE” are automatically adjusted according to the input signal. Changing the displa y langua ge # Press the MENU button to display the menu screen.
52-E NGLISH E NGLISH -53 Adjustments and settings A UT O SEARCH This should normally be set to “ON”. ON When the power is turned on, the projector detects which signal is being input, and uses that signal for projection. OFF Use this setting when you do not want the signal source to be changed automatically when the power is turned on.
Care and maintenance 54-E NGLISH E NGLISH -55 Remedy Problem Indicator display Flashing (red) It is nearly time to replace the lamp unit. Illuminated (red) An abnormality has been detected in the lamp circuit.
Care and maintenance E NGLISH -57 56-E NGLISH Cleaning and replacing the air filter If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will illuminate and the projector’s power will turn off (the TEMP indicator will flash after the power is turned off).
Care and maintenance E NGLISH -59 58-E NGLISH , Press and hold the ENTER button for approximately 3 seconds. The “LAMP RUNTIME” will change to “TIME RESET [POWER OFF]”. B If the MENU button or the RETURN button on the remote control unit is pressed, the lamp time resetting screen will be cancelled.
E NGLISH -61 Care and maintenance 60-E NGLISH Picture from computer does not appear. Problem Possible cause B The cable may be too long. B The external video output for the laptop computer may not be set correctly. (You may be able to change the external output settings by pressing the [Fn]+[F3] or [Fn]+[F10] keys simultaneously.
Others E NGLISH -63 62-E NGLISH Specifications Power supply: 100 V - 240 V ~, 50 Hz/60 Hz Power consumption: 180 W [During standby (when fan is stopped): Approx.
E NGLISH -65 Others 64-E NGLISH Appendix *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected.
E NGLISH -67 Others 66-E NGLISH Using the SERIAL connector The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.
E NGLISH -69 Others 68-E NGLISH Dimensions <Units: mm (inch)> Pr ojection dimensions calculation methods Dimensions such as projection distances can be calculated from the screen diagonal length. (Units for calculations: m) SD SW 16:9 LW/LT SH Screen Width: SW=SDx0.
70-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac kno wledgements B VGA and XGA are trademarks of International Business Machines Corporation. B S-VGA is a registered trademark of the Video Electronics Standards Association.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic PT-AE900U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic PT-AE900U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic PT-AE900U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic PT-AE900U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic PT-AE900U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic PT-AE900U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic PT-AE900U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic PT-AE900U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
