Manuel d'utilisation / d'entretien du produit KX-TC1851W du fabricant Panasonic
Aller à la page of 56
900MHz Cordless Phone Model No. KX-TC1851B KX-TC1851W KX-TC1852B Pulse-or-tone dialing capability Operating Instructions PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico Charge the battery for about 6 hours before initial use.
Before Initial Use 2 Please read IMPORTANT SAFETY INSTRUCTIONS on page 52 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Attach your purchase receipt here. Accessories (included) For extra orders, call 1-800-332-5368.
For Best Performance 3 Battery Charge A rechargeable Ni-Cd battery powers the handset. Charge the battery for about 6 hours before initial use (p. 11). Base Unit Location/Noise Calls are transmitted between the base unit and the handset using wireless radio waves.
Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Preparation Basic Operation Advanced Operation Useful Information Using the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Storing Names and Numbers in the Directory . . . . . . . . . . . . . . 32 Steps for Entering Names and Symbols .
Location of Controls 6 Handset T ALK D IR E C T FW D /E D IT BACK F U N C T IO N /E X IT 1 2 ABC 3 DEF 5 JKL 6 MNO 4 GHI 8 TUV 0 O P E R 9 WXYZ 7 PQRS FLASH/CALL W AIT R E D IA L P A U S E T O N E CLE.
7 Preparation Base unit CA LLER ID C A L L E R I D I N U S E / C H A R G E H A N D S E T L O C A T O R S PR EAD SPECTR UM Charge Contacts (p. 12) (HANDSETLOCATOR) Button (p. 43) CALLER ID Indicator (p. 21, 22, 23) IN USE/CHARGE Indicator (p. 11) Antenna (p.
Display 8 The handset shows you instructions and information on the display. These display prompts are shown below. The Caller List is empty or there are no stored items in the directory. The battery needs to be charged. Place the handset on the base unit to charge the battery (p.
JACK SMITH 1-222-333-4444 11:20A JAN.12 a 3 9 Preparation No link to base. Place on cradle and try again. The handset has lost communication with the base unit.
Settings 10 Connections Telephone Line Cord Single-Line Telephone Jack (RJ11C) Power Outlet (AC 120 V, 60 Hz) AC Adaptor Raise the antenna. Fasten the cords to prevent them from being disconnected. Hooks ≥ USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No.
“ 11 Preparation Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use. ≥ The IN USE/CHARGE indicator lights. IN USE/CHARGE Indicator OR Battery strength You can check the battery strength on the display while the handset is on the base unit, while it is in use (making/answering a call etc.
“ Settings 12 Battery information After your Panasonic battery is fully charged (p. 11): *Within about 10 feet (3 m) ≥ Battery life may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature.
“ 13 Preparation Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Using an Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation.
“ Settings 14 Selecting the Dialing Mode If you have touch tone service, set to “ Tone ” . If rotary or pulse service is used, set to “ Pulse ” . Your phone comes from the factory set to “ Tone ” . Make sure the handset is in the standby mode.
15 Preparation Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “ B ” . Otherwise the unit may not ring and the Call Waiting Caller ID Feature may not be accessible (p. 44). Your phone comes from the factory set to “ A ” .
Programmable Functions 16 You can program the following function items using the handset near the base unit . The display shows the programming instructions. See the corresponding pages for function details. Make sure the handset is in the standby mode.
“ 17 Preparation Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing (TALK) . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF.
“ Programmable Functions 18 Selecting the Ringer Volume You can program the ringer volume to HIGH, LOW or OFF. If set to OFF, the unit will not ring. Your phone comes from the factory set to HIGH. Make sure the handset is in the standby mode. 1 Press (FUNCTION/EXIT/CH) .
Making Calls “ 19 Basic Operation 1 Press (TALK) . 2 Dial a phone number. ≥ The dialed number is displayed. ≥ After a few seconds, the display will show the length of the call and the battery strength. 3 To hang up, press (TALK) or place the handset on the base unit.
“ Making calls 20 To dial after confirming the entered number 1 Dial a phone number. ≥ If you misdial, press (CLEAR) . All digits are erased. Dial the correct phone number. 2 Press (TALK) . ≥ After a few seconds, the display will show the length of the call and the battery strength.
Answering Calls 21 Basic Operation When a call is received, the unit rings and the CALLER ID indicator on the base unit flashes quickly. If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p.
Caller ID Service 22 This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party ’ s information will be displayed after the fi rst ring.
23 Advanced Operation ≥ If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services. ≥ The name display service may not be available in some areas. For further information, please contact your telephone company.
Using the Caller List 24 Viewing the Caller List To check who has called, follow the steps below. Make sure the handset is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List. ≥ The display will show, for example, the following: 2 To search from the most recent call, press (›) .
“ 25 Advanced Operation Ex. When you search from the most recent call: Lift the handset off the base unit and press (›) or (‹) . ≥ If there is no name information for a caller, the display will only show the phone number. To return to the previous caller, press (‹) .
“ Using the Caller List 26 Calling Back from the Caller List 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List. 2 Press (›) or (‹) repeatedly to fi nd the desired caller. 3 Press (TALK) . ≥ The displayed phone number is dialed automatically.
“ 27 Advanced Operation Editing the Caller’s Phone Number The unit can edit a phone number into one of 4 patterns. Make sure the handset is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
“ Using the Caller List 28 Storing Caller List Information in the Directory You can store numbers that are in the Caller List in the directory. Make sure the handset is in the standby mode. 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
29 Advanced Operation Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries. Make sure the handset is in the standby mode. To erase a specific caller from the Caller List 1 Lift the handset off the base unit and press (›) or (‹) to enter the Caller List.
One-Touch Dialer 30 A phone number stored in the (DIRECT) button can be dialed with a one- touch operation. Storing a Phone Number in the DIRECT Button Make sure the handset is in the standby mode. 1 Press (FUNCTION/EXIT/CH) . 2 Press (›) or (‹) repeatedly until the arrow points to “ Program ” .
31 Advanced Operation Dialing the Stored Number in the DIRECT Button 1 Press (DIRECT) . ≥ The stored number is dialed automatically. ≥ After a few seconds, the display will show the length of the call and the battery strength. 2 To hang up, press (TALK) or place the handset on the base unit.
Using the Directory 32 You can store up to 50 names and phone numbers in the directory. All directory items are sorted by the first word in alphabetical order. Using the directory, you can make a call by selecting a name on the handset display. Storing Names and Numbers in the Directory Make sure the handset is in the standby mode.
“ 33 Advanced Operation 1 Press (FUNCTION/EXIT/CH) . 2 While the arrow points to “ Save directory ” , press FWD/EDIT (fl) ( Yes key). ≥ The display shows the number of stored items in the directory. 3 Enter a name, up to 15 characters, with the dialing buttons, BACK (fi) or FWD/EDIT (fl) .
(1) (2) (3) (4) (5) (6) (7) (8) (9) (0) BACK (fi) FWD/EDIT (fl) 123456789 1 0 1 1 Number of times key is pressed “ Using the Directory 34 Steps for Entering Names and Symbols The handset dialing buttons ( (0) to (9) ), BACK (fi) and FWD/EDIT (fl) can be used to enter letters and symbols.
For example, to enter “Tom Jones”: 1 Press (FUNCTION/EXIT/CH) . 2 While the arrow points to “ Save directory ” , press FWD/EDIT (fl) ( Yes key). 3 Press (8) . 4 Press (6) six times, then press FWD/EDIT (fl) to move the cursor to the right. 5 Press (6) four times.
“ Using the Directory 36 Finding Items in the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item or last item is displayed. 3 Press (›) or (‹) repeatedly until the desired item is displayed.
“ 37 Advanced Operation Dialing from the Directory 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item or last item is displayed. 3 Press (›) or (‹) repeatedly to fi nd the directory item that you want to dial (p.
“ Using the Directory 38 Editing an Item in the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item or last item is displayed. 3 Press (›) or (‹) repeatedly to fi nd the directory item you want to change (p.
39 Advanced Operation Erasing an Item from the Directory Make sure the handset is in the standby mode. 1 Press BACK (fi) or FWD/EDIT (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item or last item is displayed. 3 Press (›) or (‹) repeatedly to fi nd the directory item you want to erase (p.
Voice Mail Service 40 Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically when your line is busy or if calls are not answered. Callers can leave messages by following the pre-recorded instructions.
“ 41 Advanced Operation To erase a stored number Press and hold (CLEAR) in step 6 on page 40. ≥ You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH) . Setting the Voice Mail Tone If your voice mail service sends a voice mail tone after a new message has been recorded, set to “ On ” .
“ Voice Mail Service 42 Listening to Voice Mail Messages After receiving a voice mail message, “ Voicemail ” and “” will be displayed. To listen to your voice mail message(s), follow the steps below. 1 Press (FUNCTION/EXIT/CH) . 2 Press (›) or (‹) repeatedly until the arrow points to “ Voicemail dial ” .
Special Features “ 43 Advanced Operation Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user.
44 “ Special Features For Call Waiting Service Users Press (FLASH/CALLWAIT) if you hear a call-waiting tone while talking. ≥ The fi rst call is put on hold and you can answer the second call. ≥ To return to the fi rst caller, press (FLASH/CALLWAIT) again.
45 Advanced Operation FLASH Button Pressing (FLASH/CALLWAIT) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Selecting the fl ash time The fl ash time depends on your telephone exchange or host PBX.
46.
47 Useful Information 2 1.
48 If “ Recharge battery ” is displayed and/or “” fl ashes after being fully charged, replace the battery with a new Panasonic P-P508 battery. To order, call the accessories telephone number on page 2. 1 Remove the cover by sliding while pressing the arrow.
49 Useful Information Before Requesting Help “ Problem “ No link to base. Place on cradle and try again. ” is displayed and an alarm tone sounds. The unit does not work. Static, sound cuts in/out, fades. Interference from other electrical units.
50 “ Before Requesting Help Problem You cannot program items, such as the dialing mode. Previously programmed information is erased. You cannot store a name and phone number in the directory. While programming or searching, the unit starts to ring and stops the program/ search.
51 Useful Information Problem (HANDSETLOCATOR) does not function. You cannot redial by pressing (REDIAL/PAUSE) . “ Recharge battery ” is displayed, “” fl ashes or the unit beeps intermittently. You charged the battery fully, but “ Recharge battery ” is still displayed and/or “” continues to fl ash.
52 Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.
53 Useful Information CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re. They may explode. Check with local waste management codes for special disposal instructions.
54 FCC and Other Information If requested by the telephone company, inform them as follows: FCC Registration No. . . . . . . . . . . . . . . . . . . . . . (found on the bottom of the unit) Ringer Equivalence . . . . . . . . . . . . . . . . . . . . . .
55 Useful Information CAUTION: Any changes or modi fi cations not expressly approved by the party responsible for compliance could void the user ’ s authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
For product service ≥ Panasonic Servicenters are listed in the servicenter directory. ≥ Call 1-800-211-PANA(7262) for the location of an authorized servicenter. ≥ Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-TC1851W c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-TC1851W - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-TC1851W, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-TC1851W va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-TC1851W, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-TC1851W.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-TC1851W. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-TC1851W ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
