Manuel d'utilisation / d'entretien du produit AJ-SDd93 du fabricant Panasonic
Aller à la page of 46
Before operating this product, please read the instructions carefully and save this manual for future use. Digital V ideo Cassette Recorder Operating Instructions AJ- P ENGLISH AJ- E Model No.
– 2 – IMPORT ANT “Unauthorized recording of copyrighted television programmes, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws.
– 3 – indicates safety information. For AJ-SD93E FOR U.K. ONLY This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.
– 4 – indicates safety information. For AJ-SD93E IMPORT ANT “ Unauthorized recording of copyrighted television programmes, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws.
– 5 – Contents Introduction ......................................................6 Included accessories ......................................6 Optional boards ...............................................6 Features ............................
– 6 – Introduction The model AJ-SD93 multi-purpose digital VTR uses small, 1/4-inch wide cassette tapes to record and play back images with a high picture quality at a video recording rate of 50 Mbps while it can also record and play back DVCPRO (25 Mbps) format tapes as well as play back consumer-use DV/DVCAM tapes.
– 7 – Features Compact and lightweight This unit is a DVCPRO50 digital VTR which uses 1/4- inch wide cassette tapes. Its compact and lightweight design makes it ideal as a feeder for non-linear editing or as a viewer installed on a desk-top, for instance.
– 8 – Parts and their functions Front panel Digital Video Cassette Recorder AJ- SUPER ON OFF TCG REGEN PRESET EXT INT COUNTER PF PF 1 PF 2 PF 3D I A G MENU PUSH SHTL/SLOW TC PRESET METER FULL/FINE.
– 9 – Parts and their functions (continued) Digital Video Cassette Recorder AJ- SUPER ON OFF TCG REGEN PRESET EXT INT COUNTER PF PF 1 PF 2 PF 3D I A G MENU PUSH SHTL/SLOW TC PRESET METER FULL/FINE.
– 10 – Parts and their functions (continued) Digital Video Cassette Recorder AJ- SUPER ON OFF TCG REGEN PRESET EXT INT COUNTER PF PF 1 PF 2 PF 3D I A G MENU PUSH SHTL/SLOW TC PRESET METER FULL/FIN.
– 11 – Parts and their functions (continued) Display panel Level meter This displays the levels of the PCM audio signals for CH1, CH2, CH3 and CH4. During recording and when the E-E mode is selected, it shows the levels of the input audio signals; during playback, it shows the levels of the output audio signals.
– 12 – Parts and their functions (continued) DVCPRO /DV AUDIO MON AUDIO OUT VIDEO MON (SUPER) 750 AUTO IN OUT VIDEO Y VIDEO1 SDI IN SDI OUT VIDEO2 L CH 1 CH 2 CH 3 CH 4 CH 1 CH 2 CH 3 CH 4 Y R AC IN AUDIO IN P B P R P B P R VIDEO OUT DIGITAL VIDEO IN REF VIDEO IN TIME CODE REMOTE SIGNAL GND 9 1 6 5 Pin No.
– 13 – Digital Video Cassette Recorder AJ- SUPER ON OFF TCG REGEN PRESET EXT INT COUNTER PF PF 1 PF 2 PF 3D I A G MENU PUSH SHTL/SLOW TC PRESET METER FULL/FINE MONITOR SEL RESET REC PB UNITY INPUT.
– 14 – IEEE 1394 digital interface Precautions for use • Connect the interface with another device on a 1:1 basis. • If the E-92 warning (1394 INITIAL ERROR) is displayed, either re-connect the connecting cable or turn the VTR ’ s power off and back on.
– 15 – Joystick ( 1 ) Press the SEARCH button to activate the joystick. When STICK has been selected as the setup menu item No.100 (SEARCH ENA) setting, the joystick will be activated without pressing the SEARCH button. ( 2 ) Press the joystick to switch between the SHTL mode and SLOW mode.
– 16 – Repeat playback Setting the BEGIN and END points (1) Press the MENU button. ( 2) Select menu item No.161 (CTL(TC)BGN) or No.162 (END), and incline the joystick to the left or right. By operating the joystick, the user can choose whether or not to set the BEGIN and END points.
– 17 – Setup (initial settings) The unit ’ s main settings are performed while making selections using a menu-driven system. When a TV monitor is connected to the VIDEO MON connector on the unit ’ s rear panel, the setup menus will appear on the TV monitor.
– 18 – Setup menus Changing the file (1) Press the MENU button. (2) When the FF button is pressed while holding down the PF button, the next user file is selected; conversely, when the REW button is pressed while holding down the PF button, the previous user file is selected.
– 19 – Setup menus (continued) Loading user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file.
– 20 – Setup menus (continued) SYSTEM menu No./Item Description 13 SYS H System phase adjustment: 74 ns steps – : Advanced, +: Delayed Note: If setting operation is performed, the setting value does not return to factory (default) setting.
– 21 – No./Item Description 008 DISPLAY SEL This selects what information is to be provided by the time code and other super displays output to the VIDEO MON connector. 0000 TIME : Data only. (The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.
– 22 – Setup menus (continued) USER menu <BASIC> The underlined items indicates the initial setting. No./Item Description 009 CHARA H-POS This sets the position of the characters on the horizontal plane for the time code and other super displays output to the VIDEO MON connector.
– 23 – Setup menus (continued) USER menu <OPERA TION> The underlined items indicates the initial setting. No./Item Description 100 SEARCH ENA This sets the method used to transfer to the search mode (stick operation). 0000 STICK : Operation transfers to the search mode when the SEARCH button is pressed or the stick is operated.
– 24 – Setup menus (continued) The underlined items indicates the initial setting. USER menu <OPERA TION> No./Item Description No./Item Description 115 EJECT SW INH This selects whether to enable or disable the operation of the EJECT button on the front panel.
– 25 – Setup menus (continued) The underlined items indicates the initial setting. No./Item Description USER menu <T APE PROTECT> No./Item Description 401 SRC PROTECT When the time selected as the setup menu item No.
– 26 – Setup menus (continued) USER menu <TIME CODE> The underlined items indicates the initial setting. No./Item Description 506 BINARY GP This sets the usage status of the user bit of the time code generated by the TCG.
– 27 – USER menu <TIME CODE> Setup menus (continued) The underlined items indicates the initial setting. No./Item Description 510 TC OUT REF This is used to switch the phase of the time code, which is output from the TIME CODE OUT connector, for the external LTC input when the TCG switch is at the EXT position.
– 28 – Setup menus (continued) The underlined items indicates the initial setting. USER menu <VIDEO> No./Item Description 600 INT SG This selects the internal reference signal. 0001 BB : The black burst is generated. 0002 CB100 : 100% color bars are generated.
– 29 – 660 UMID REC This selects whether or not to record the UMID information on the tape. 0000 OFF : UMID information is not recorded on the tape.
– 30 – Setup menus (continued) USER menu <VIDEO> The underlined items indicates the initial setting. No./Item Description 662 UMID POS This sets the line on which the UMID information is to be superimposed. Notes: • The line selected for the setup menu item No.
– 31 – Setup menus (continued) The underlined items indicates the initial setting. USER menu <AUDIO> No./Item Description 722 REC CH1 This selects the input signal to be recorded on the audio CH1 track. 0000 CH1 : Audio input CH1 signal. 0001 CH2 : Audio input CH2 signal.
– 32 – 13 10 Setup menus (continued) USER menu <V BLANK> The underlined items indicates the initial setting. No./Item Description 802 TELETEXT SEL (For AJ-SD93P) For selecting the type of teletext signals to be recorded.
– 33 – No./Item Description No./Item Description USER menu <DIF> 880 DIF SPEED This sets the transfer rate of the IEEE 1394 digital interface output. 0000 S100 : 100 Mbps 0001 S200 : 200 Mbps 0002 S400 : 400 Mbps 881 DIF TYPE (For AJ-SD93P) This sets the format when the IEEE 1394 digital signals are output.
– 34 – Setup menus (continued) The underlined items indicates the initial setting. USER menu <MENU> No./Item Description A00 LOAD This selects the user file whose contents will be loaded into USER1. 0000 USER2 : The USER2 file contents are loaded.
– 35 – T ime code/user bit Time code The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are.
– 36 – T ime code/user bit (continued) Superimpose screen The control signals, time code, etc. are displayed using abbreviations. TCR : : : TCR : : : TCR : : : Abbreviations: CTL : Control signal count value TCR : Time code data recorded in the SBC area TCR.
– 37 – V ideo head cleaning Condensation Condensation occurs due to the same principle involved when droplets of water form on a window pane of a heated room.
– 38 – Error messages When a warning occurs in this unit, the error number is indicated on the counter display. Open the DIAG menu to display a description of the error on the counter display or monitor TV. When a operational malfunction has occurred in the unit, the error number flashes on the counter display.
– 39 – Error messages (continued) If “ T&S&M ” is selected in the setup menu No. 008 (DISPLAY SEL), a message appears in the modedisplay whenever a warning or error occurs. When multiple events occur, the event with the highest priority is displayed.
– 40 – Error messages (continued) Monitor display Description Priority High (Low) VTR operation E-04 (UNKNOWN SIG) This appears when the signals supplied from the IEEE 1394 digital interface are not DVCPRO/DV format signals. Check that the 1394 input has been connected properly.
– 41 – Error messages (continued) Monitor display Description VTR operation Corrective action E-01 (LOW RF) This appears when an envelope level approximately one-third of the normal level has been detected for more than one second during playback or recording.
– 42 – Error messages (continued) E-64 S REEL ROTA TOO FAST If the supply reel motor speed is abnormally high, the error number flashes on the display. Set the POWER switch to OFF and then to ON again. STOP E-67 T REEL ROTA TOO FAST If the take-up reel motor speed is abnormally high, the error number flashes on the display.
– 43 – Specifications Power supply: AC 100 - 240 V, 50 / 60 Hz Power consumption: 52 W Operating ambient temperature: 5 ° C to 40 ° C (41 ° F to 104 ° F) Operating ambient humidity: 10 % to 80 % (no condensation) Weight: 6.
– 44 – Specifications (continued) AUDIO Digital Audio Sampling frequency: 48 kHz (synchronized with video) Quantizing: 16 bits Frequency response: 20 Hz to 20 kHz ± 1.0 dB (at reference level) Dynamic range: More than 85 dB (1 kHz, emphasis OFF, “ A ” weighted) Distortion: Less than 0.
– 45 –.
Panasonic Broadcast Europe Panasonic Marketing Europe GmbH Hagenauer Str. 43, 65203 Wiesbaden-Biebrich Deutschland Tel: 49-611-235-481 © 2004 Matsushita Electric Industrial Co.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic AJ-SDd93 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic AJ-SDd93 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic AJ-SDd93, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic AJ-SDd93 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic AJ-SDd93, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic AJ-SDd93.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic AJ-SDd93. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic AJ-SDd93 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
