Manuel d'utilisation / d'entretien du produit AG-RT850P du fabricant Panasonic
Aller à la page of 32
Operating Instructions Time Lapse Recorder Before attempting to connect, operate or adjust this product, please read these instructions completely. Model AG- PAL P Printed in Japan VQT9333-1 P S0401H1.
2 IMPORTANT “Unauthorized recording of copyrighted televi- sion programs, films, video tapes and other materials may infringe the right of copyright owners and be contrary to copyright laws.” CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
3 Contents Features ....................................................................... 4 Regular Maintenance Service Recommendation ......... 4 Routine & Regular Inspection Request ........................ 5 Pa r ts and Their Functions ......
4 Features Recording and playback up to 240-hour time modes with the T -120 tape In addition to the 6-hour time mode, recording and playback can be performed in the time lapse modes (L18-, L24-, 48-, 72-, 96-, 120-, 168-, 180- and 240-hour modes).
5 Routine & Regular Inspection Request This unit is designed to withstand many hours of operation. Nevertheless, it is recommended that routine inspections be conducted to help ensure trouble-free operation. CAUTION Do not forget to conduct the routine inspection with auto repeat recording.
6 Parts and Their Functions q POWER switch The power is turned on when this switch is pressed. When the switch is pressed again, the power is turned off. w ST OP button When this is pressed, the tape stops traveling. e PA USE/STILL (page) button When this is pressed during recording, the tape temporarily stops traveling.
7 !5 T racking (–, +)/V -LOCK button These buttons are used to adjust the tracking. If noise appears on the playback picture, press the buttons to adjust the tracking is such a way that the picture is made as clear as possible. When both buttons are pressed together during 6-hour mode pla yback, the tr acking is adjusted automatically .
8 q Camera switching output connector Camera switching output connector; connect it to the sequential s witcher. w Audio input/output connectors Audio input/output connectors (phono jacks) e Video input/output connectors Video input/output connectors (BNC); connect the input connector to the video camera, etc.
9 Menu Screens One of the menu screens appears on the TV monitor when the MENU/REC LOCK s witch is set to MENU. The displa y returns to the regular screen when this switch is set to OFF . •W hen a menu screen has appeared, the items are set using the page, shift and set buttons.
10 Menu Screens MENU SCREEN 3 The alarm recording mode and terminal output are set on Menu Screen 3. i Alarm recording mode selection (see page 20) The recording mode in the event of an alarm input is selected.
11 MENU SCREEN 6 The daylight savings mode and search dial and jog dial operation mode are set on Menu Screen 6. !8 Selecting the daylight savings mode Select the daylight savings mode. ON: The da ylight savings mode is selected. OFF: The da ylight savings mode is not selected.
12 Date and Time Settings This unit comes with a time/date generator which enables the date and time to be superimposed on the recording. When the power is switched on, the date, time of the day and time mode are displayed (in the case of a regular screen).
13 TIME TIME TIME When the shift ( ) button is pressed, the hour digits flash. Press the SET (+, –) buttons to set the hour to “3”. When the shift ( ) button is pressed, minute digits flash. Press the SET (+, –) buttons to set the minutes to “25”.
14 Time Mode Selection TIME MODE button TRACKING / V-LOCK RESET PULL OPEN COUNTER / TIME MODE SEARCH REC ALARM EJECT REC REVIEW REC REV FWD Refer to the table given below to select the mode that suits the intended purpose of use. 6 hours 86 1/60 60 Yes 1/30 L18 hours 24 18 0.
15 Recording Procedure q Switch on the power to the connected equipment. w Adjust so that the images of the video cameras appear properly on the TV monitor . e Check that the date and time displa yed on the TV monitor hav e been adjusted proper ly . r Insert a cassette tape into the unit after checking that the tab on the cassette is intact.
16 Timer Recor ding There are two methods of timer recording: one uses the internal timer and the other uses an external timer . Internal Timer Recording Start time and stop time Bear in mind the following points when setting these times.
17 Daily Recor ding (Daily Timer)/W eekly Recording (W eekl y Timer) Example: When recording from 8:30 to 12:00 from Sunday through Thursday and from 9:00 to 12:00 on Fridays and Saturdays SUN ON 0:00 0:00 SUN ON 8:00 0:00 SUN ON 8:00 0:00 SUN ON 8:30 0:00 SUN ON 8:30 0:00 SUN ON 8:30 12:00 Check that OFF or ON for Sunday (SUN) is flashing.
18 Timer Recor ding External Timer Recording The unit can be made to record using an e xter nal timer to tur n on its po wer . (Audio timer available from dealer) Power Cord To AC IN Timer TRACKING / .
19 Alarm Recording (Emergency Recording) When an emergency occurs at the monitoring site during prolonged monitoring and recording, the alarm function is automatically triggered, and alarm recording is performed.
20 Alarm Recording (Emergency Recording) Alarm Recording Operation Check that a video cassette with its tab intact has been inserted. Set the MENU/REC LOCK switch to MENU to display the menu screens. Press the page button to display the alarm recording setting screen (Menu Screen 3) on the TV monitor.
21 Frame Switcher Connection and Recording Connections (using the WJ-FS616) MIC REMOTE BATTERY PUSH OPEN CAMERA IN OUT TAPE END OUT WARNING/ REC OUT REC IN COMMON ALARM RESET IN ALARM IN AUDIO IN OUT .
22 Playback Procedure Before operating the unit, check that the internal/external timer recording displays (INT/EXT) have been cleared from the display . (If INT or EXT is displa yed, use the TIMER MODE s witch to clear it.) r Press the PLA Y button. PLAY q Switch on the power to the unit and TV monitor .
23 1. Outline of RS-232C interface This interface is for enabling the basic functions of the VTR to be operated using a personal computer. The D-SUB 9P connector is used to connect the VTR with the personal computer.
24 RS-232C Interface 02h (HEX) 3Bh command delimiter ccc ccc: command (3 ASCII characters) 3Ah parameter delimiter parameter (any number: based on command) 03H In some cases, the format does not contain what is enclosed in the square brackets.
25 ■ Table of commands Command Completion message Command parameter Counter reset CRT CRT Eject OEJ OEJ Fast forward OFF OFF Pause/still OPA OPA Play OPL OPL Record ORC ORC Rewind ORW ORW Stop OSP O.
26 RS-232C Interface Details of commands Time mode switching command This sets the time mode during deck recording/playback. However, when REC T-MODE has been set, it takes precedence over the other modes during recording.
27 All status request command When the all status request command has been received, the current deck status is detected and sent by the bitmap shown below. PC: [STX] QOS [ETX] VTR: [STX] OPS abcdef [ETX] Automatic send setting command This sets whether to detect changes in the deck status and send the status automatically.
28 Tr oubleshooting Tr oub le with installation No po wer . • Is the po wer plug inserted proper ly into the A C outlet? No picture. • Is the unit connected properly with the TV , video cameras, etc.? • Are any of the connecting cables making faulty contact? Indistinct picture.
29 The power has been restored after a • Has the power failure lasted a long time (more than 1 week)? power failure but recording does not Set the timer recording switch to EXT to ensure that the unit is automatically resume. set to the recording mode even after a prolonged power failure.
30 Specifications Power Source: 120 V AC , 50 – 60 Hz Power Consumption: 21 W is the safety information. Video Recording System: 4 rotary heads, helical scanning T ape Speed: 11.
31.
SECURITY & DIGITAL IMAGING COMPANY A Division of Matsushita Electric Corporation of America Security Systems Group Executive Office: One Panasonic Way, Panazip 3E-7, Secaucus, New Jersey 07094 Eastern Zone Office: One Panasonic Way, Panazip 4E-7, Secaucus, NJ 07094 (201) 348-7303, Fax (201) 348-7372 Western Zone Office: 6550 Katella Ave.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic AG-RT850P c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic AG-RT850P - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic AG-RT850P, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic AG-RT850P va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic AG-RT850P, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic AG-RT850P.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic AG-RT850P. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic AG-RT850P ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
