Manuel d'utilisation / d'entretien du produit 5130G du fabricant Palsonic
Aller à la page of 31
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 51CM C.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Hyperband Intellectualised I C bus control 255 preset channels Automatic channel preset Full function remote control AV input and output terminals Clock/Game/Calendar Digital AFT technology Four pictu.
Important Safety Cautions 2 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. 1 When cleaning dust off the picture tube disconnect the power first.
! This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supply of any other type. 3 Do not cover the ventilating hole in the cabinet Keep a space of more than 5 cm from the walls to the TV set to ensure adequate ventilation. 6 If the power cord or the plug is damaged contact a qualified service department for service.
1. Earphone Jack AV/TV input terminals (VIDEO, AUDIO L, R). 2. AV/TV button: Video input select. 3. MENU button: To enter into menu operation. 4. VOL- button: volume down adjust; menu item adjust 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select.
Back 1. Antenna input 2. S-VIDEO input 3. AV input (VIDEO, AUDIO L/MONO, R) 4. AV output (VIDEO, AUDIO L/MONO, R) 5 2 3 4 1.
6 Notes: In most cases, the function CH+/- buttons are equal to the buttons, and the function of VOL+/- buttons are equal to the buttons. Identification of Controls (continued) ! / Remote Controller D.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
Connect to video and audio equipment This TV set provides AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
Menu Introduction In MENU operations, the CH+/- (or ) buttons are used to select item upwards or downwards; the VOL+/- (or ) buttons are used to adjust or confirm selected item.
! Notes: In most cases, the function of CH+/- buttons are equal to the buttons; and the function of VOL+/- buttons are equal to the buttons. ted and there are some items that are not displayed yet, the or symbol twinkles. perations (Press HELP button to display/cancel this help bar).
2. 1. Turning off ! Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the AV/TV button on the set to turn on.
Select Input Signal 4. 3. 2. 1. Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals. If you want to switch to TV press AV button again or follow step 2, 3 or 4.
Auto Search Enter the Program menu and select Auto item. Press VOL+ or VOL- button and the TV set starts Auto Channel Preset. All Active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program.
You can skip unnecessary channels by using Skip function when you browse by CH+/- buttons. Fine tuning Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.
Setting colour system If the picture colour is abnormal, maybe the colour system setting is wrong. Then you can adjust colour system as follows. Setting sound system If the sound is abnormal, maybe the sound system setting is wrong. Then you can adjust sound system as follows.
168 8 Press 0-9 direct channel selector. Channel Selection 1. Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". To select two-digit channel: Press -/-- button repeatedly to display "--".
100 Item Standard Softness Brightness Contrast weaker Color paler deeper Sharpness darker lighter softer sharper Picture mode Dynamic Contrast Color 80 50 50 80 50 1 . Press MENU button to display Picture menu. 2 . Press CH+/- button to select item. 3 .
Press MUTE button, and the volume decreases to half of the original volume before you adjust. This mode is useful when many people are watching TV and one of them is going to answer a telephone call. 2. Use MUTE button. 1. Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases.
Please enter the Clock menu and select Sleep item. Press VOL+ or VOL- button to select between Off, 10, 20, 30, 40, 50 and 60 (minutes). When the sleep time elapses, the TV set goes to STANDBY automatically. Please enter the Clock menu and select Timer item.
Setting ON timer Please enter the Clock menu and select TimeOn item. Press VOL+ or VOL- button to set ON Time. After you finish setting Time On item, press the STANDBY button on the remote control. Then the TV set auto turns on when your preset time elapses.
In Calendar interface, press CH+/- buttons to select year , month or date ; press VOL+/- buttons to adjust. The Calendar is from 1901 to 2050. 22 Setting OSD language Setting blue background System Setting 1. Press MENU button twice to display System menu.
Playing Game Please enter the System menu and select Game item. Press VOL+ or VOL- button to enter Game Select menu. How to play the name? Description of icons: :the man you control.
Please enter the System menu and select SafeMode item. Press VOL+ or VOL- button to enter SafeMode menu. If you never set password for Safe Mode or you set the SafeMode item to Off , you can directly enter into SafeMode menu without password, otherwise, a four digit password is necessary before you can enter into SafeMode menu.
Please enter the SafeMode menu and select CH.Limit item. Press VOL+ or VOL- button to select the limitation channel number ranging from 0-254. For example, you can set the limitation channel number to 99, the the user can only select the channel from 0-99.
Please enter the SafeMode menu and select OnSearch item. Press VOL+ or VOL- button to select On or Off . If you set this item to On , next time you turn on by Power Switch , the TV set searches program and set system automatically (please make sure that the antenna connection is OK before you turn on) .
Remote controller does not work Unevenness in colour in some parts of the screen Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Even if the picture or the sound is normal, changes in room temperature sometimes makes the TV cabinet expand or contract, making a noise.
! TV system & channel range Power Supply: Power Consumption: Dimensions (mm): Weight: CRT: AC 240V, 50Hz 70W 612 (W) x 466 (H) x 476 (D) 23 kg 51 cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41 Colour System: Sound output: Accessories: PAL-B/G NTSC playback 1.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-J1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Palsonic 5130G c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Palsonic 5130G - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Palsonic 5130G, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Palsonic 5130G va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Palsonic 5130G, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Palsonic 5130G.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Palsonic 5130G. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Palsonic 5130G ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
