Manuel d'utilisation / d'entretien du produit NTL77806.2 du fabricant NordicTrack
Aller à la page of 32
USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL77806.2 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
22. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. When using iFIT cards, an electronic “chirp- ing” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or incline changes.
Thank you for selecting the revolutionary NordicTrack ® A2250 treadmill. The A2250 treadmill offers a selection of features designed to make your workouts at home more enjoyable and effective. And when you’re not ex- ercising, the unique A2250 treadmill can be folded up, requiring less than half the floor space of other tread- mills.
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its side as shown. Partially fold the Frame (55) so that the treadmill is more sta- ble. Do not fully fold the Frame until the treadmill is completely assembled.
7 2. Insert the other Extension Leg (97) into the indi- cated bracket on the base of the Uprights (85) as shown. Attach the Extension Leg (97) with two Extension Leg Bolts (87), two Star Washers (67), and two Extension Leg Nuts (91) as shown. Firmly tighten the Extension Leg Bolts.
8 7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 23). To protect the floor or carpet from damage, place a mat under the treadmill.
OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
10 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to help you get the most from your workouts. When the manual mode of the console is se- lected, the speed and incline of the treadmill can be changed with the t ouch of a button.
11 HOW TO TURN ON THE POWER Note: To prevent damage to the walking platform, always wear clean shoes while using the treadmill. Plug in the power cord (see page 9). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord.
12 The Training Zones display —This display indicates the approxi- mate intensity level of your exercise. If five or six indicators are lit, for example, the display shows that your pace is ideal for aerobic exercise.
13 Turn on the fan if desired. To turn on the fan at low speed, press the Fan button; the word “LOW” will appear in the matrix for a few seconds. To turn on the fan at high speed, press the button a second time; the word “HIGH” will appear in the matrix.
14 HOW TO USE A PRESET PROGRAM Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the preset programs. To select one of the six preset programs, press the Program Select but- ton repeatedly until “P 1,” “P 2,” “P 3,” “P 4,” “P 5,” or “P 6” appears in the Calories/Pulse display.
15 Follow your progress with the displays. See step 5 on page 11. Measure your heart rate if desired. See step 6 on page 12. Turn on the fan if desired. See step 7 on page 13. When you are finished exercising, remove the key from the console. When the program ends, make sure that the in- cline of the treadmill is at the lowest setting.
16 HOW TO USE A CUSTOM PROGRAM Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. To select a custom pro- gram, press the Program Select button repeatedly until “P 7” or “P 8” ap- pears in the Calories/Pulse display.
17 HOW TO USE AN IFIT CARD Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. Insert an iFIT Card and select a program. To use an iFIT program, insert an iFIT Card into the iFIT slot; make sure that the iFIT Card is ori- ented so the metal contacts are face-down and are inserted into the iFIT slot.
18 THE USER’S MODE The console features a user’s mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been operated. The user’s mode also allows you to select miles or kilometers as the unit of measure- ment and to turn on and turn off the demo mode.
19 THE OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor offers hands-free oper- ation as it monitors your heart rate during your work- outs. To purchase the optional chest pulse sensor, call the toll-free telephone number on the front cover of this manual.
20 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord.
21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the frame down until it is past the pin on the latch knob. 2. Hold the metal frame firmly with both hands , and lower it to the floor.
22 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
23 Locate the Reed Switch (22) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8". If necessary, move the Reed Switch slightly using a slotted screwdriver.
24 PROBLEM: The incline of the treadmill does not change correctly SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
25 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
26 P ART LIST—Model No. NTL77806.2 R0207B To locate the parts listed below, see the EXPLODED DRAWING starting on page 28. Key No. Qty. Description Key No.
27 Key No. Qty. Description Key No. Qty. Description 103 1 Key/Clip 104 4 Isolator Screw/Bracket Screw 105 1 Console 106 1 Idler Pulley Nut 107 1 Idler Pulley Washer 108 1 Front Roller Nut # 1 12".
19 18 14 10 11 12 13 5 62 15 55 5 16 11 17 14 10 13 12 49 62 57 57 64 23 56 104 104 28 6 27 39 29 39 27 3 4 8 8 8 61 61 104 1 2 2 2 104 54 4 8 8 8 2 2 2 3 2 2 60 102 60 102 9 7 EXPLODED DRA WING A—Model No.
29 25 26 31 37 36 33 7 7 7 34 34 34 23 42 38 20 19 37 40 41 32 45 7 43 51 23 50 52 23 47 94 48 65 53 96 23 24 24 21 22 58 69 74 75 20 59 66 107 106 68 35 44 20 32 7 32 32 32 108 7 23 32 7 EXPLODED DRA WING B—Model No.
100 103 98 105 78 70 90 78 95 99 7 99 99 99 99 83 83 83 99 99 99 99 99 86 90 7 7 7 7 93 30 EXPLODED DRA WING C—Model No. NTL77806.2 R0207B.
81 82 85 76 77 84 73 81 82 81 82 30 80 72 71 67 72 71 72 67 72 97 87 87 67 91 79 79 92 7 7 80 81 46 101 101 101 81 82 101 30 67 73 84 97 89 88 88 89 63 63 91 81 46 101 101 31 EXPLODED DRA WING D—Model No.
Part No. 252196 R0207B Printed in USA © 2007 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack A2250 treadmill (“Product”) is warranted to be free of all defects in mate- rial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NordicTrack NTL77806.2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NordicTrack NTL77806.2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NordicTrack NTL77806.2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NordicTrack NTL77806.2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NordicTrack NTL77806.2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NordicTrack NTL77806.2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NordicTrack NTL77806.2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NordicTrack NTL77806.2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
