Manuel d'utilisation / d'entretien du produit 1500S du fabricant Nokia
Aller à la page of 38
User Guide.
.
GB 3 Connecting a TV and a VCR Quick guide Preparing the Remote Control See pages 13 and 14 if you want to connect to an analogue satellite receiver or connect in any other way . •P lug in your Mediamaster . • The ”First time installation” menu is shown.
GB 4 Ti me adjustment The time is adjusted using the cursor up / cursor down buttons, ± half an hour at a time. Y ou can also change the minutes using the cursor left / cursor right buttons. •P r e ss select to finish the first-time installation and to open the Navi Bars.
GB 5 Contents Quick guide 3 Software end-user license 6 General information 8 Remote control 9 Front and rear panel 10 Installation of the Mediamaster 11 Preparing the remote control 11 Connecting the.
GB 6 Nokia Mediamaster software end-user license IMPORT ANT : READ CAREFULL Y BEFORE OR USING THE SOFTWARE NOKIA CORPORA TION, NOKIA HOME COMMUNICA TIONS END-USER SOFTWARE AGREEMENT This Software Agre.
GB 7 BUSINESS INFORMA TION, OR FOR ANY SPECIAL, DIRECT , INDIRECT , INCIDENT AL, ECONOMIC, COVER, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UNDER CONTRACT , TORT .
GB 8 General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus.
GB 9 Remote control Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of standby mode. 0 - 9 Change the channel and select individual menu options. Note: If 0 is entered as the first digit, the TV Release func- tionality is activated (see below).
GB 10 Front panel FRONT AND REAR P ANEL Function ON Standby Locked to channel Remote control feedback SW download Error LED indicator 1 Green Red - - Continous green flashing Continous red flashing LE.
GB 11 Installation of the Mediamaster SCART socket SCART cable Owner’ s manual Remote control 8 mm 15 mm 3 mm F-connector Mains cable x The Mediamaster box should contain the following items: •t he Mediamaster •a remote control with 2 AAA batteries •a SCART cable (fully connected 1.
GB 12 Nokia smart switch 1 2 SCART Connecting a TV and VCR Refer to your VCR’ s manual for full instructions. • Connect one SCART cable from the main SCAR T socket on the TV to the TV SCART socket on the Mediamaster . • Connect another SCART cable from the VCR to the AUX SCAR T socket on the Mediamaster .
GB 13 Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIGIT AL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input.
GB 14 First time installation Language • Select the desired menu language using the cursor up / cursor down button. This will also become the main language for audio and subtitling. •P r e ss select to continue. General information Once you have correctly connected the Mediamaster , you will also have to perform a “First-time installation.
GB 15 One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •P r e ss opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, includ- ing Universal LNB, can be selected using the cursor left / cursor right button.
GB 16 T ypical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connec- tor marked LNB 2 (B).
GB 17 Motor antenna configuration If you have an antenna motor to control your satellite antenna you must configure the following settings. •F rom the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select .
GB 18 Channel search The Channel search procedure can be carried out in five different ways. The menu will look different depending on what option you selected in the “Antenna/satellite selection” menu.
GB 19 Channel search in progress This menu will be shown while the Mediamaster is searching for TV and radio chan- nels. All channels that are found will be listed on the screen. Please note that the search procedure may take a few minutes. Y ou can cancel the search at any time by pressing select .
GB 20 Navi Bars General information •P r e ss select to open the Navi Bars. The Navi Bars is used for selecting TV/Radio channels and changing system set- tings. The horizontal row contains folders , for example, Astra, Settings and so on. Their names are shown in black text at the bottom of each folder .
GB 21 Visi ble Invisible Control folder ☛ User preferences Banner time-out When you switch channels, an information banner will be shown for a few sec- onds. Y ou can select the length of time that the banner will be shown. Vo lume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
GB 22 Important information about editing channels Before you start, you must select the list you want to edit. If you are watching TV and press select and then choose Edit channels, you can only edit TV channels. If you are listening to radio channels you can only edit radio channels.
GB 23 Delete list If you want to delete a Favourite list, select the list using the cursor left / cursor right button and press select . Rename list Y ou can give an existing list a new name by following the instructions in the “ How to give a specific name ” section on page 19.
GB 24 Control folder ☛ Edit satellites Y ou can add a new satellite to the system. Y ou can also edit or delete existing sat- ellites. To add a new satellite • Select “Add Satellite”. • Enter the name of the new satellite. (Entering a name is described on page 23.
GB 25 •Y ou can adjust the dish using channel preview if PID information has been en- tered. •P r e ss select to start the channel search. •W hen you get the message on the screen that ”you have found X new TV -chan- nels and X new radio channels”, press select to save the new channels.
GB 26 Control folder ☛ System info If you need to contact your service provider or a service centre, they may ask for information that is available from this menu. This gives general information about the hardware and software version on which your Mediamaster is running.
GB 27 Settings folder ☛ T V To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory . Y ou can adjust the audio/video settings for your receiver . •P ress opt to view the TV picture on the screen.
GB 28 Navi Bars Settings folder ☛ T im e To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory . The time is adjusted using the cursor up / cursor down button, half an hour at a time. Y ou can also adjust the minutes using the cursor left / cursor right button.
GB 29 Settings folder ☛ Reinstall To open this menu you will be asked to enter your access code. The access code is set to 1234 at the factory . Use this option only if you have to start the complete installation procedure from scratch.
GB 30 V iewing Mode General information The following describes the basic functions of your Mediamaster that can be used while watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme in- formation.
GB 31 Extended programme information The Mediamaster can display information about programmes that are currently be- ing broadcasted as well as those that will be broadcast next. This procedure is the same for both TV and radio mode. By pressing info while watching TV the “Programme information” banner will appear .
GB 32 External equipment Use the 0 (zero) button to toggle between the Mediamaster and any external equipment connected to the AUX Scart, e.g. a video recorder or a satellite receiver . T eletext Pressing txt will open a teletext page (if teletext is transmitted on that channel.
GB 33 Glossary of terms AC-3 A multichannel digital audio encoding system. Access control A feature that allows parents to ”lock” programmes that they consider to be unsuitable for children. A ”locked” channel or programme can only be ”unlocked” using the special access code.
GB 34 Tr oubleshooting Problem The LED on the front panel does not light up/is not lit. The left-hand LED is red No sound or picture. No sound or picture on the horizon- tal modulated transponder . Bad picture/blocking error . There is no Welcome menu on the screen after you have switched the Mediamaster on for the first time.
GB 35 T ransmission standards DVB, MPEG 2 LNB / T uner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -65 dBm Supply voltage 13 /18 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0.
GB 36 Motor antenna Antenna/satellite Antenna User pref User preferenses Switch/antenna Channel search Channel Edit channels Edit channels TV settings TV Timer Timer list Timer setup Advanced manual s.
.
Nokia is a registered trademark of Nokia Corporation www .nokia.com 00000935.00.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Nokia 1500S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Nokia 1500S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Nokia 1500S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Nokia 1500S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Nokia 1500S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Nokia 1500S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Nokia 1500S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Nokia 1500S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
