Manuel d'utilisation / d'entretien du produit M60 du fabricant NEC
Aller à la page of 41
User ’ s Manual M40/M46.
Index Declaration of conformity ...................................................................................................... ....................... English-1 Important Information ............................................................
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English-2 Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MUL TEOS M40 (L406T3)/MUL TEOS M46 (L466T4) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC Display Solutions, Ltd.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 VGA RGB/HV OPTION DISPLAY SIZE 1 4 7 VGA RGB/HV OPTION DISPLA Y A A S IZE VGA RGB/HV OPTION 1 7 4 Contents Power Cord User ’s Manual V ideo Signal Cable (D-SUB to D-SUB Cable) Wireless Rem.
English-5 English 9 10 7 DOWN ( ) button Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM menu when the OSM menu is turned-off.
English-6 T erminal Panel 9 AUDIO OUT* To output the audio signal from the AUDIO IN 1, 2, 3, HDMI, and TV jack to an external device (stereo receiver , amplifier , etc.). 10 VIDEO INPUT/OUTPUT Connector* VIDEO IN connector (BNC and RCA): To input a composite video signal.
English-7 English 1 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. 2 INPUT button* Selects which input signal, [DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD], [VIDEO], [TV] or [S-VIDEO].
English-8 POWER RGB1 RGB2 RGB3 HDMI DVD/HD PICTURE MODE DISPLAY AUTO SET UP VOL STILL PIP REMOTEID ON/OFF SET RESET REMOTE CONTROLLER RU-M111 MTS SLEEP INPUT CHANGE ON/OFF CAPTURE MUTE CH CHRTN EXIT M.
English-9 English Mounting DO NOT mount the monitor yourself. Please ask dealer . For proper installation it is strongly recommended to use a trained, qualified technician. Please inspect the location where the unit is to be mounted. Mounting on wall or ceiling is the customer ’s responsibility .
English-10 Attaching Mounting Accessories The display is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Mounting accessories can be attached while the monitor is on the T abletop Stand in the upright position (Figure 1).
English-11 English Figure 6 Figure 7 Figure 8 Main switch cover (with stand) The longer side of the cover is toward the bottom of the display . Main switch cover (without stand) The shorter side of the cover is toward the bottom of the display . Screw Holes 250mm Screw Cord or chain Clamp 3.
English-12 1. Determine the installation location CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TWO OR MORE PEOPLE.
English-13 English 5. Switch on the power of all the attached external equipment When connected with a computer , switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7.
English-14 Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image.
English-15 English Connect the LCD Monitor to Macintosh •T o connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor , use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).
English-16 LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector DVI-D connector To DVI output To audio output Connect the LCD Monitor to a Computer with a Digital Output • The DVI IN connector also accepts a DVI-D cable.
English-17 English Connect the LCD Monitor to a DVD Player •T o connect the DVD/HD IN connector (RCA) on the LCD monitor , use a separately available RCA connector cable. Some DVD players may have different connectors such as DVI-D connector . Select [DVI/HD] mode from the “DVI MODE” menu when you connect a DVI-D connector .
English-18 Connect the LCD Monitor to a DVD Player • Please use the HDMI cable with HDMI logo. •Y ou may need some seconds to show the signal. •W e do not support PC-DVI signal. Connecting a DVD Player with HDMI out* Connecting your DVD player to your LCD monitor will enable you to display DVD video.
English-19 English Connect the LCD Monitor to a Stereo Amplifier •T urn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier .
English-20 Connecting to a TV* Precautions when connecting the antenna • Use a coaxial cable which is free from interference. Avoid using a parallel flat wire as interference may occur , causing the reception to become unstable and noise to appear on the screen.
English-21 English Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD.
English-22 Picture Mode DVI,VGA, RGB/HV ST ANDARD sRGB HIGHBRIGHT HDMI, DVD/HD, ST ANDARD CINEMA HIGHBRIGHT VIDEO, TV Power Indicator Using Power Management The LCD monitor follows the VESA approved DPM Power Management function.
English-23 English OSM (On-Screen-Manager) Controls Press UP or DOWN button to select sub-menu. Press SET . Press UP or DOWN, PLUS or MINUS to select the function or setting to be adjusted. Press MENU or EXIT . Remote Control Press UP or DOWN button to select.
English-24 OSM Setting PICTURE BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to adjust. Note: The sRGB picture mode is standard and cannot be changed.
English-25 English H RESOLUTION Adjusts the horizontal size of the image. INPUT DVI, VGA, RGB/HV only V RESOLUTION Adjusts the vertical size of the image. INPUT DVI, VGA, RGB/HV only ZOOM MODE Select the aspect ratio of the screen image. BASE ZOOM 16:9* For input sources that have a 16:9 aspect ratio.
English-26 TIME DA YLIGHT SA VING SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER, SCHEDULE SETTINGS. PIP KEEP PIP MODE* Allows the monitor to remain in “PIP” mode after powering off. When Power is returned, PIP appears without having to enter the OSM.
English-27 English OSM RESET Resets the following settings within the OSM menu back to factory setting: OSM TURN OFF , OSM POSITION, INFORMA TION OSM, OSM TRANSP ARENCY .
English-28 FIRST DETECT When the current video input signal is not present, then the monitor searches for a video INPUT DVI, VGA, RGB/HV only signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically .
English-29 English NOTE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. To program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTING using the up and down buttons.
English-30 NOTE 2: IMAGE PERSISTENCE Please be aware that LCD T echnology may experience a phenomena known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen.
English-31 English This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection. MONITOR ID and IR CONTROL Using one PC or one infrared wireless controller , up to 26 individual M40/M46 monitors can be controlled through a daisy chain via RS-232C connection.
English-32 Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
English-33 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t received correctly , the LCD monitor will not send the return command.
English-34 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. Colour Control Systems: Allows you to adjust the colours on your screen and customize the colour accuracy of your monitor to a variety of standards.
English-35 English T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English-36 Specifications - M40 Product Specifications LCD Module 40" /102cm diagonal Pixel Pitch: 0.461mm Resolution: 1920 x 1080 dots Colour: Over 16 million colours (depending on video card used) Brightness: 450cd/m 2 (T yp.
English-37 English Specifications - M46 Product Specifications LCD Module 46" /1 16.8cm diagonal Pixel Pitch: 0.530mm Resolution: 1920 x 1080 dots Colour: Over 16 million colours (depending on video card used) Brightness: 450cd/m 2 (T yp.
English-38 Pin Assignment 1) Analog RGB input (MiniDsub15p): VGA Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10.
English-39 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NEC M60 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NEC M60 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NEC M60, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NEC M60 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NEC M60, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NEC M60.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NEC M60. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NEC M60 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
