Manuel d'utilisation / d'entretien du produit IC3624PWR du fabricant Asante Technologies
Aller à la page of 87
IntraCore ® IC3624 PWR Layer 2+ Po wer over Ethernet (PoE) Switch with Dual Gigabit User ’ s Manual.
2 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit IntraCore ® IC3624P WR Layer 2+ Power over Etherne t (PoE) Swi tch with Dual Gig abit User’ s Manual Asanté T echnologies , Inc.
3 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Table of Contents Table of Content s .............................................................................................................. .......................................
4 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.7 Applying P ower ............................................................................................................. ..................................... 16 3.8 Ethernet Cabl ing .
5 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3 Advanced Sw itch Configura tion.............................................................................................. ............................ 41 6.3.1 VLAN M anagement ..
6 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit C.2 Pin Assign ments for 1000BaseT Pin .......................................................................................... ....................... 82 C.3 Cable T esting for Ex isting Category 5 Cable .
7 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 1: Intr oducti on The IntraCore IC3624P W R Lay er 2+ Pow er over Ethernet (Po E) with Dual G igabit (IC3 624PWR) is a product y ou can use to build your next generatio n netw ork.
8 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 1.1.2 Perf orman ce The IC3624P W R switch u s es a wire-speed, non-block ing sw itching fabri c. • Wire-speed G igabit sw itching (1,488,000 pps) and Fast Ethernet switchi ng (148, 800 pps) • Non-blocking 8.
9 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 2: Networ k Planning This chapter gives an overv iew of switch management, includi ng the met hods you can use to manage your IntraCore IC3624P W R M anaged Sw itch. Topics include: • Management A c cess Overview • SNMP Access • Protocols 2.
10 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 2.2 SNMP A ccess You can u se an ex ternal Simple N etwork M anagement Protocol (SNM P) based application to manage y our IC3624P WR switch. This manage ment method require s the SNM P agent on the switch a nd the SNMP M anager station to use the sa me community string.
11 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 2.2.1 Protoc ols The IC3624P WR switch supp orts the foll owing protocols: • Virtual ter minal protoc ols, such as Telnet • SNMP .
12 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 3: Hard w are Installa tion and Setup This chapter descri bes the procedures for rack-m ou nti ng, conn ecting the cables, and powerin g up the IntraCore IC3624P W R PoE sw itch at your sit e.
13 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.3 Site Requirements Consider th e follow ing site requ irements f or proper inst allation. 3.3.1 Environme ntal Requirements Choose a clean, dry, dust-free area locati on. Avoid dir ect sunlight, heat sources, or are as with high levels of electromagn etic interfer ence.
14 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.4 Preparing f or Installation Switches can be moun ted in a standar d 19-inc h equip men t rack or on a flat surface. Follow these general precaution s when plann ing your eq uipment location s and co nnections .
15 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.5.1 Recom mended T ools You need th e follow ing tools an d equipme nt (not in cluded) to i nstall the sw itch into an e quipment rac.
16 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Warning: M ake sure you support the switch u ntil all the mounting scr ews for ea ch bracket is se cured to the equipment ra ck. Fai lure to do s o could ca use the sw itch to fall, which may result in per sonal injury or da mage to t he switch.
17 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.8 Ethernet C abling The cables y ou nee d are determi ned by the existing equipmen t. To ensure proper operation w hen inst all ing the sw itch into a network, make sure that the curre nt cabl es are suit able with either 10/100BaseT X, 10/100/1 000BaseT or 1 000BaseT operati on.
18 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 3.9.1 Wiring Map for Ser ial Cable The follow ing table de scribes the seria l cable w iring information.
19 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 4: Connecting Net w ork Devices The sw itch is desig ned to i nterconnect multiple segments (or coll ision domains). It can be connected to network cards in PCs and servers, an d to hubs, ro uters, or other sw itches.
20 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 4.1.3 Netw ork Wirin g Connect ions The punch-dow n block is an integral part of many of t he new er equipment ra cks. It is actually part of the pat ch panel. Instructions for ma king conne ctions in t he wiring closet with thi s type of equip m ent follows.
21 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The follow ing table li sts the LEDs and describes the status lights. LED Condition Status Fast Ethernet On/Green The port has a valid 100 Mbps link. Flas hing in dicates a ctivity. On/Amber The port ha s a valid 10 Mbps l ink.
22 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 4.4 Cable Lab eling and Connection Records When plan ning a netw ork installation, it is es sential to l abel and record w here each ca ble is co nnected . This help s you locate inter-con nected devic es, isolat e faults, and chang e your topol ogy.
23 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 5: Configur i ng the Switch This ch apter takes y ou through t he step s required t o initially conne ct the switch to a console , set up in itial pa sswords, configure an IP address, and restor e factory defaults.
24 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 5.2 Direct A ccess Direct ac cess to the switch con s ole is a chieved by connecti ng the sw itch’s console port t o a VT-100 or compati ble terminal or to a PC, Apple Macintos h, or UNIX workstation e quipped with a ter minal-emulatio n progra m.
25 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The following scr een appe ars. 1. Enter a name for this conn ection. 2. Click OK The following scr een appe ars. 1. In the drop dow n box labeled Con nect Using:, click th e arrow and choose the desired C OM port.
26 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Connection Settings The port setti ngs are as follow s: Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None 1.
27 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit To use the arrow keys when atta ched to the U ser Interfa ce using a Tel net Session, under the terminal pull down menu choos e Properties a nd activat e the VT100 Arrow s option.
28 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Chapter 6: Using the Inte rface The main menu disp lays av ailable sub-m enus. T he letter within squ are brac ket of each menu o ption can b e typed to directly ch oose that o ption.
29 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit.
30 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The follow ing table de scribes the areas y ou se e from the Gener al Information screen.
31 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.1 A dministration Configuration From the Admin Configuration s creen, you can enter sy stem-relate d informatio n for refer ence such as System Name, System Loca tion, and Sy stem Con tact Informat ion.
32 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.2 IP Configuration All host s that run IP m ust have a unique IP address. An IP address i s a logic al address that is ind ependent of a ho st’s hardware. IP ad dresses ar e 32 bits long.
33 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Configure th e switch by adding the SNM P host agent to t he host table in ord er to partici pate in the SN MP com munity.
34 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.3.1 SNMP Man a gement Configuration The SNM P Configuration screen lists all SNM P managers and as sociated informat ion. There ar e two defau lt community strings, pr ivate and public.
35 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.3.2 Trap Co nfiguration All host s in comm unity strin gs with T RAP privileges are notified w hen a trap condi tion occur s. Map: Main Menu->Basic Config uration Menu->SNMP Conf iguration->Trap Configuration 6.
36 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Port Link Down Trap When thi s feature is enabled, the syst em generate s an SNM P trap upon a port link down. T he failure o ccurs when a link is di sconnecte d. You ca n enable or disable ea ch port independent ly.
37 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.4 Port Configuration In the Basic P ort Configuration m enu, you c an set t he port admi n status, mode, and fl ow control . The follow ing is an example fro m the GUI int erface. Map: Main Menu->Basic Config uration Menu->Port Config uration 6.
38 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.2.6 Forwarding DB Use the Forw arding Data base menu t o view the dy nami c MAC addresses in t he address database. W hen addre sses are in the data base, the packet s are forw arded directly to the spe cified port s .
39 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit There are four c ommands available on this menu. Static Address Table Display and configur e the st atic M AC address tab le. Display M AC Address By Port Display M AC address table for a specifie d port Display MAC Address by MA C Display MAC address in order of M AC address.
40 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit There are four c ommands on this men u. The example be low is fro m the GUI int erface.
41 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Map: Main Menu->Basic Config uration-> A RP Table 6.3 A dvanced Switch Configuration The Advanced Sw itch Configuratio n screen al lows you to configur e several advanced system-rel ated setting s .
42 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.1 VLAN Management A virtual LAN (VLAN ) is a sw itched network that i s segmented by funct ion, projec t team or applic ation, w ithout regard to the physi cal lo cations of the user s.
43 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Map: Main Menu->Adv anced Switch Configuration-> VLAN Manage ment The follow ing table de scribe s the six options available fro m the VLAN M anagement sub menu. Create VLAN: Create a new VLAN; a uniqu e ID must be given.
44 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Follow the se steps to configure a VLAN member: 1. Select Conf iguration VLAN Member 2. Give the corres ponding VLAN ID 3. Modify the VLAN member s 4. Cl ick Apply. Follow the se steps to set GVRP Statu s: 1.
45 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit • Set GVRP Status • Quit to prev ious menu Set Port VID: Set PVID of a port. Set Frame Ty pe: Set the accept able fra me types, A ll or Tagged O nly. W hen the T agged Only is select ed, all non-tagge d packet are dropped .
46 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.2.1 Set Port Pri ority The default sy stem prior ity is the same in all ports . To set up a port w ith a different priority i n the li nk aggregat ion, use the Set Port Priority .
47 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.3 Port Monitoring The Port M onitoring scr een is us ed to can de signat e a port for m onitoring traff ic from one port co nfigured on t he switch.
48 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit • Global Com mands: • Enable/Dis able Globa l MST P • Set MSTP Protocol V e rsion • Set MST P Configuration N ame • Set MSTP .
49 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The follow ing tables define th e global i nformation th at is acc ess and confi gure through this su bmenu. Global M STP Status: The status of global mu ltiple spanning tre e protocol. Enab le indicate s that M STP is running.
50 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.4.1 CIST Confi guration Use this submenu to configure th e Commo n Internal Spa nning T ree (CIST).
51 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.4.2 CIST Bas ic Port Configur ation Set the port prior ity, the path cost f or each port and ena ble or disab le the port ST P status to increas e the netw ork efficiency .
52 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.4.3 A dvanced CIST Port Config uration Set the port edg e status, the port-to-p ort status, a nd restar t port migrat ion to pr event the w rong link. Map: Main Menu->Adv anced Switch Configuration-> MSTP Configuration->CIST Co nfiguration 6.
53 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Map: Main Menu->Adv anced Switch Configuration-> MSTP Configuration->M STP Instance Configuration.
54 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.4.5 Designated Topology Information Use this screen to v iew topol ogy informa tion, th e status of the links and design ated root, bridge and port numbers.
55 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.4.6 Regional T opolog y Information This pag e shows regi onal topolo gy information.
56 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.5 Access List Co nfiguratio n There are sev en funct ions for ac cess control. Map: Main Menu->Adv a nced Sw itch Configuration-.
57 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.5.1 Clas sifier Configur ation Menu Use this submenu to create, dele te and modify cla ssifier fields . Map: Main Menu->Adv a nced Sw itch Configuration->A ccess Control->C lassifier Confi guration Menu Three co mmands are available in this s creen.
58 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The following des crib es the cla ss ifie r field s. Source IP addres s: Selected pac kets depen d on so urce IP addre ss Source IP add.
59 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.5.2 Clas sifier Group Use this submenu to create or de lete classifiers, join clas sifiers, re move, classifier s, set cla s sifier group name s. 6.3.5.3 In Profi le Action From this s creen you c an create, d elete, and m odify the a ction for the differen t in-bound pr ofiles.
60 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Three options are availa ble from the In-Profile Action sub m enu. • Create In-Profile A c tion • Delete In-Profile A ction • Mod.
61 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Three options are availa ble from thi s screen. • Create No-M atch Action • Delete No-Match A ction • Modify No-Match Acti on • No-M atch Action is the same as I n-Profile A ction.
62 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Drop: Number of dr opped pa ckets Policed-dsc p: Changes TO S-DS (first 6 bit s) field Committed rate: Configures committed rate to d etermine how traffic f low is allow ed to pass.
63 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.5.7 Poli cy Use this submenu to create, dele te, enab le or disab le, show status or sequenc e and update t he polici es for th e different p orts. A poli cy may asso ciated with cla ssifier, in-p rofile, no-ma tch, out-prof ile, por t list, and sequence.
64 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.6.2 Schedulin g Method Use this submenu to set the QoS scheduling meth od and th e traffic c lass-weight mapping. Map: Main Menu->Adv anced Switch Configuration->Q uality of Service Configuration->Scheduling Method 6.
65 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.8 802.1 Port B ased Access Contro l Use this menu to view status of t he ports and to set p ort specific val ues Map: Main Menu->Adv a nced Sw itch Configuration->802 .1 Port Based Acces s Control Configur ation Use this menu to set 13 function s.
66 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.9 IGMP Snooping In networks where multi media appl ication s generate multicast traffic, I nternet Grou p Multica st Protocol (IGM P) reduces unne cessary bandwidth usage by l imiting tra ffic forw arding that i s normally broadcast t hroughout network.
67 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit You can confi gure the switch to use Intern et Group M anagement Protocol (IGM P) snooping in subn ets that rec eive IGMP.
68 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.9.2 Show Router Port Tabl e This page s hows the ports in so me VLANs th at are co nnected to t he router. You can snoop the package fro m router side in the s e ports. Map: Main Menu->Adv anced Switch Configuration-> IGMP Snooping->S how Router Port Table 6.
69 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.10.1 PoE Por t Configuration Power over Ethernet provides power to conne c ted IEEE 802.3a f-complian t powered dev ices from all 10/100 Etherne t ports if t he switch det ects t hat there is no pow er on the cir cuit.
70 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.3.10.2 PoE Glo bal Configuratio n Globally configures switch to use PoE t o provide p ower to conne cted IEEE 802.3a f-compliant powered d evices fro m all 10/100 Eth ernet port s if the swit ch detects that ther e is no pow er on the circuit.
71 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.4 Stat istics Use this submenu to v iew statis tics about the sw itch. Map: Main Menu->Stat istics You can v iew the entire switch, select individu al ports, refresh the screen t o view curren t statistics or v iew stati stics since the l ast reset.
72 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.5 Tools This scr een enable s you to m anage and m onitor the PoE Sw itch. Map: Main Menu->Too ls This pag e has sev en submenus : • TFTP Software Upgrade • Configurati on File Up load or Dow nload • System Reboot • System Log • Ping 6.
73 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The follow ing procedure gives the steps to follow when usi ng the w eb interface. T he proces s is simi lar with e ither the CMI or CLI interfa ces. 1. Go to M ain Menu> Sw itch Tools Con figuration> So ftware Upgrade M enu>TFTP Software Upgrade.
74 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit There are four s ubmenus fro m this s creen. Set TFTP Server IP Address Enter the serv er IP address t o get the T FTP server Set Confi.
75 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.5.5 Syst em Log Use this submenu to observe sy stem beh avior. Y ou can clear the syste m log by selecting C lear Syste m Log.
76 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit 6.6 Sav e Configuration Use this submenu to save the c hanged set tings to the Fla sh memory aft er making any cha nges to the screen s within the console interface.
77 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Appendix A: Basic Troubleshooti ng In the event t he sw itch does not operate pr operly , follow the trou bleshooting tips below . F you need mor e help contact A sante techn ical suppo rt at www .
78 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Caution: T he management agent can a ccept up to four simult aneous Telnet se ssion s. If you are at max imum number of se ssions, an additi onal Telnet connection can n ot log into t he system.
79 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Appendix B: Specificat ions The sect ions below list the features and product sp ecifications for t he IntraCore IC 3624P W R PoE switch.
80 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit L2+ Switching Virtual LANs IEEEE 802.1q, 256 VLAN s Spanning Tree IEEE 802.1d (STP ), IEEE 802.1s (multi ple), IEEE 802.1w (rapid reconfiguration) , fast link Flow Control IEEE 802.3x Link Aggregati on IEEE 802.
81 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Appendix C: Cables and Pin Assignments This Appendix describes the i nformation o n 10BaseT/100BaseT X, 1000Ba seT, and te sting for ex isting Category 5 cables.
82 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Note: The “+” and “-” s igns repre sent the polarity of the w ires that make up each w ire pair.
83 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit The table bel ow shows the 1000Ba seT M DI and M DI-X port pinouts. T hese ports r equire that a ll four p airs of w ires be connected. N ote that for 1000BaseT operation , all four pairs of w ires are used for b oth transmit and receiv e.
84 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit TIA 568-B allow s the use of 50/125 m icron multi mode opti cal fiber in both the horizontal and backb one in addit ion to the types li sted ab ove. All opt ical fiber compon ents and in stallat ion practi ces must meet app licable b uilding and safety codes.
85 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Appendix D: FCC Compliance and Warranty Statements D.1 FCC Co mpliance Statem ent This equipm ent has bee n tested and found t o comply with the l imits for a C lass A digi tal devic e, pursu ant to part 15 of the FCC Rul es.
86 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit D.3 IntraCore Warranty Statement Products: IntraCore IC3624P W R Duration: 3 years Advanced W arra nty United States: Second Bu siness Day Replacement: Other Countr ies: See y our local di stributor or reseller.
87 IntraCore IC362 4P W R Layer 2 PoE Sw itch with Dual Gig abit Appendix E. Online Warr a nt y Registr ation Please regist er the sw itch online at ww w.asante.com/ support/w arranty/index .html. By doing so, you’ll be entitled to special off ers, up-to- date inform ation, and i mportant product bul letins.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asante Technologies IC3624PWR c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asante Technologies IC3624PWR - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asante Technologies IC3624PWR, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asante Technologies IC3624PWR va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asante Technologies IC3624PWR, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asante Technologies IC3624PWR.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asante Technologies IC3624PWR. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asante Technologies IC3624PWR ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
