Manuel d'utilisation / d'entretien du produit Model 311 du fabricant Art
Aller à la page of 12
The ART Model 311 Precision Stereo 2-Way Active Crossover with Subwoofer Output USER’S GUIDE - 1 -.
TABLE OF CONTENTS Introduction ........................................................................................... 3 Installation ............................................................................................. 4 AC Power Hookup .
INTRODUCTION Thank you for purchasing an ART 311 - and congratulations: You now own one of the most versatile crossove rs available. Offering a superb level of sound quality, the 311 circuit design, combined with a straightforward user interface, quickly and easily gives you access to all of its features.
INSTALLATION The 311 may be used in a wide variety of applications and environments. Enclosed in a rack-mo untable, all-steel enclosure, the unit is designed for continuous prof essional use.
CONTROLS POWER SWITCH The power switch applies and remove s power to the Crossover. Make sure all equipment after the 311 is either off or the outputs are turned all the way down before turning on or off the 311 . LOW OUTPUT LEVEL CONTROL Each channel of the 311 has a Low Output Level control.
The main crossover filters are 4-pole Linkwitz-Riley designs (24dB/octave). This yields a sharp rolloff to help pr otect speakers and the outputs sum to a flat response. HIGH OUTPUT LEVEL CONTROL Each channel of the 311 has a High Output Level control.
CONNECTIONS It is easy to interface the unit with a wide variety of equipment. The rear panel has balanced XLR and ¼” inputs as well as unbalanced ¼” outputs. XLR INPUT JACKS (REAR) The XLR input connecti ons are balanced and follow the AES standard for wiring: Pin 1 = Ground, Pin 2 = Hot (+), Pin 3 = Cold (-).
OPERATION The following guideline refers to a P.A. system, but the same basic ideas apply to a home recording setup or a Hi-Fi system. A stereo 2-way sound system is typically set up as follows: Separate high frequency (horn or tweeter) and low frequency (bass) cabinets are used for each side (left and right) of the sound system.
3. Connect the Low output of C hannel One to the power amplifier powering the low frequency cabinets (left). 4. Connect the High output of C hannel One to the power amplifier powering the high frequency cabinets (left). 5. Repeat for the right side of the system (Channel Two).
WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (A R T.
SERVICE The following information is provided in the unlikely event that your unit requires service. 1) Be sure that the unit is the cause of the problem. Check to make sure the unit has the proper power supplied, all cables are connected correctly, and the cables themselves ar e in working condition.
311 SPECIFICATIONS Dimensions 1.75”H x 19”W x 5.5”D Weight 4.85 lbs. (2.2 kg) Input Connections XLR, ¼” TRS, balanced Output Connections ¼”TS, unbalanced Input Impedance 100K ohms Output Impedance 220 ohms Maximum Input Level +21dBu Maximum Output Level +21dBu CMRR >75dB (typical @ 1kHz) Frequency Response 10Hz to 40kHz, +/-.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Art Model 311 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Art Model 311 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Art Model 311, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Art Model 311 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Art Model 311, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Art Model 311.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Art Model 311. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Art Model 311 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.