Manuel d'utilisation / d'entretien du produit HC9000DW du fabricant Mitsubishi Electronics
Aller à la page of 57
HOME THEATER PROJECTOR This User Manual is important to you. Please read it bef ore using y our projector . MODEL HC9000D HC9000DW User Manual HC9000D HC9000DW.
EN-2 The ex clamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the applianc e.
EN-3 T rademark , Registered tr ademark SXRD TM is the trademark of Sony Corporation. HDMI, the HDMI logo and High-Denition Multimedia I nterface are trademarks or register ed trademarks of HDMI Licensing LL C. The “HD ready ” logo is a trademark of EIC T A.
EN-4 Please read all these instructions regarding y our projector and retain them f or future refer ence. F ollow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated.
EN-5 W ARNING: Unplug immediately if there is something wr ong with your projector . Do not operate if smoke, str ange noise or odor comes out of your projector . I t might cause re or electric shock. I n this case, unplug immediately and contact your dealer .
EN-6 2 3 Checking accessories The follo wing accessories are provided with this pr ojector . Check to be sure that all of the ac cessories are packed in the package. Cables Mini D-SUB 15-pin Mini D-SUB 15-pin D-SUB 9-pin D-SUB 9-pin Computer cable (PC013284299) RS-232C cable (PC013284199) • Used for projector con trol by computer .
EN-7 Pr eparing your projector (con tinued) Over view T erminal panel Control panel and Indicator 1 POWER button (ON/STANDBY) The status is changed between ON and STANDBY.
EN-8 Remote contr ol 1 ON ( I ) button 2 HDMI2 button 3 HDMI1 button 4 C OMPONENT button 5 P .M. ME/MC USER buttons 6 ENTER button 7 MENU button 8 C ONTRAST button* 9 BRIGHTNESS button* 10 GAMMA button* 11 ZOOM/FOCUS button 12 LENS SHIFT button 13 COL OR MANAGEMENT button 14 COL OR button* 15 SHARPNESS button* 16 COL OR TEMP .
EN-9 Operational range of the r emote contr ol V er tical directions (ceiling mount) Reception angle V er tical directions When operating the remot e control, keep the distanc e from the remot e control to the projector via the scr een within about 5 m (15 feet).
EN-10 Setting up your pr ojec tor Setting up the screen Install the screen perpendicularly to the projector . If the screen can not be installed in such a way , adjust the projection angle of the projector .
EN-11 Setting up your projector (continued) Screen size and pr ojec tion distance (continued) When the aspect ratio of the screen is Standard When the aspect ratio of the screen is Standard , the positional relation between the projected image and the screen is as shown on the right.
EN-12 Adjusting the position of the pr ojec ted image T o adjust the position of the projected image on the screen, use the LENS SHIFT button. 1. Pr ess the LENS SHIFT button. • The LENS SHIFT menu appears at the cent er of the screen. 2. Pr ess the p , q , t or u button to move the image position.
EN-13 F ront pr ojec tion, ceiling mounting F or ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation.
EN-14 DVD player Video player Set-top box or digital tuner A. Connecting the projector to video equipment • When the projector and the connected devices are loca ted too close to each other , the projected image may be aected by their interference .
EN-15 1. Connect one end of the optional video cable to the VIDEO IN terminal of the projector . 2. Connect the other end of the video cable to the video output terminal of the video equipment. • Also read the instruction manual of the equipment to be connected.
EN-16 Connecting to video equipment having a HDMI t erminal Y ou can projec t high-quality images by connecting the HDMI IN terminal of this projec tor to video equipment ha ving a HDMI output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD pla yers.
EN-17 B. P lugging in the power c ord • In order to ensure the saf ety in case of trouble with the projector , use an elec trical outlet having an ear th leakage breaker to supply the pow er to the projector . If you do not have such outlet, ask your dealer t o install it.
EN-18 1. Put the projector int o standby mode by pressing the main pow er switch. The POWER indicator lights up r ed. • If the projector was turned o before the lamp was c ooled down suciently last time, the lamp may not light up ev en when the POWER button is pressed .
EN-19 13. Press the POWER button on the pr ojector or the ST ANDBY button on the remot e control. • A conrmation message is displayed . • T o cancel the proc edure, leav e the projector for a while or press the MENU button. 14. Press the POWER button on the pr ojector or the ST ANDBY button on the remot e control again.
EN-20 Viewing video images (c ontinued) Setting the aspect ratio Y ou can change the aspec t ratio of the input video signal (or the ratio of width to heigh t of the image). Change the setting according t o the type of the input video signal. : Signal size : Image area • Bold frames are rec ommended modes.
EN-21 How to change the settings: With the r emote control: 1. Pr ess the ASPEC T button. • The screen f or selecting the aspec t ratio appears. 2. Select your desired aspect ratio by pressing the ASPECT button. • The aspect mode is switched between Standard, F ull Screen, Anamorphic1 and Anamorphic2.
EN-22 A. Connecting the projector to a comput er Pr eparation: • Make sure that the pow er of the projector and that of the computer are turned o . • When connecting the projector to a desktop comput er , disconnect the computer cables that are connected to the monit or .
EN-23 1. Put the pr ojec tor into standby mode b y pressing the main power switch. The POWER indicator lights up r ed. • If the projector was turned of before the lamp was c ooled down suciently last time, the lamp may not light up ev en when the POWER button is pressed .
EN-24 Viewing c omputer images (continued) 11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the scr een. 12. Press the p or q button t o adjust the ver tical position and t or u button to adjust the horizontal position of the displayed image .
EN-25 V iewing 3D images Y ou can enjoy the 3D fun when you watch 3D movies with 3D Glasses . The 3D Glasses and 3D Emitter shall be purchased individually; to view 3D images, the special 3D Glasses (EY -3DGS-1U) and 3D Emitter (EY -3D -EMT1) must be purchased .
EN-26 • About glasses(Liquid Crystal Shutter) • Do not press the glasses too hard; and also do not fall on or bend them. • Do not scratch the surface of the glasses with anything sharp .
EN-27 • Placing the 3D Emitter in an arbitrary place V iewing 3D images (continued) Pr eparation: T ur n o the power of the pr ojector . 1. Put the Infra-red tr ansmission par t of the 3D Emitter into the base part. 2. Secure temporarily the 3D Emitter in an arbitrary place (such as the wall around the scr een).
EN-28 V iewing 3D images (continued) 3D images viewing This unit can con ver t the broadcast and signal input of the f ollowing 3D images into the three- dimensional image viewing,(starting from Novem.
EN-29 V iewing 3D images (continued) Switch the viewing methods of the 3D images (3D bright or dark adjustment, 3D S ync adjustment). Change the 3D image brightness to make the images better .
EN-30 Menu operation • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . H igh Bright 7500 K 2 .2 7 .5 IRE 0 IRE 3. 75I R E Pic t ure1 Gam m a C orrec t ion Bright nes s C olor T int Sharpnes s Bright nes s C inem a 2 .
EN-31 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . C us t om2 LT I Lev el Projec t ion CTI L e vel Vert ic al K.
EN-32 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . St andard As pec t R at io Sc reen 3 Phas e C loc k Enhanc ed 2D / 3 D Aut o Vert . Blue St andard R GB I nput Vert .
EN-33 Menu operation (continued) • Some menu items can ’t be operated or displa yed depending on the input signal or signal format . I nput R es olut ion I nf o Lam p H ours C ent er M enu Pos .
EN-34 How to set the menus: 2. The follo wing describes how to set O T imer time as an example. 1. Pr ess the MENU button. 2. Pr ess the t or u button to select Setup menu to use.
EN-35 2. Picture 2 menu ITEM SET TING FUNC TION Cinema Mode 3 Options Use to adjust the select Movie mode. TNR 4 Options Use to r educe random noise. (See page 41.) MNR 4 Options Use to reduc e mosquito noise. (See page 41.) BAR O/On Use to reduce block noise.
EN-36 4. Screen menu Menu operation (continued) 4. Screen menu ITEM SET TING FUNC TION Aspect Ratio Standard Select to project images with an aspec t ratio of Standard . F ull Screen Select to project images with an aspec t ratio of F ull S creen Anamorphic1 Theverticalimageenlargesto2.
EN-37 5. Input menu 6. Setup menu • When the lamp mode is switched, the pr ojected image may icker . T his is not a product malfunc tion. • Do not change the setting of Lamp Mode frequently . • It may take a little while to carr y out Reset All in the Setup menu.
EN-38 7. Info menu Menu operation (continued) 7. Info menu ITEM DESCRIPTION Input Resolution Indicates the name of the t erminal to which the currently projected video signal is being input. Lamp Hours This item shows a lamp operating time (hour). • TheLampHoursiscalculatedbasedonthatLampModeisNormal.
EN-39 Picture Mode Y ou can select the most suitable setting to the images you watch. Select Picture Mode in the Picture 1 menu. Cinema This is a mode for wat ching movies in dim lighting as in a theater . VIDEO This is a standard mode suitable f or watching video images, etc .
EN-40 T o adjust the tone of white (C olor T emp.): Y ou can selec t a preset color temperatur e (white tone) using the menu. (See page 34 for menu setting.) 1. Display the Picture 1 menu . 2. Select Color T emp. b y pressing the p or q button. 3. Select your desired color temperatur e by pressing the t or u button.
EN-41 Adjusting pr ojec ted images (con tinued) T o adjust the ratio of change in brightness (Gamma Correction): Y ou can selec t a preset Gamma Correction using the menu. (See page 34 for menu setting.) 1. Display the Picture 1 menu . 2. Select G amma Correction by pressing the p or q butt on.
EN-42 Adjusting pr ojec ted images (con tinued) T o adjust the 3D Brightness: Y ou can adjust the 3D Br ightness of the projected image using the menu. This menu is available only in 3D mode. (See page 37 for menu setting.) 1. Display the Input menu. 2.
EN-43 This projector automatically and pr operly projects video signals supplied from the computer . However , some video signals may not be projected, depending on the type of the computer . I n such a case, Use the A uto Position function to (See page 24.
EN-44 This projector is equipped with a lamp to pr ojec t images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to r eplace the lamp with a new lamp sold separately that is ex clusive to this projector .
EN-45 Replacing the lamp (continued) T o replace the lamp: 1. T ur n o the main power switch and unplug the power cor d. 2. Loosen 2 screw s (a) using a Phillips screwdriver (+) and remov e the rear side Lamp cover (b) fr om the projector . 3. Loosen 2 screw s (c) using a Phillips screwdriver (+).
EN-46 1. T ur n o the main power switch and unplug the power cor d. 2. Loosen 2 screw s using a Phillips screwdriver (+) and remov e the rear side Lamp cover fr om projector , hang it well under the projector . 3. Loosen the screw s using using a Phillips screwdriv er (+).
EN-47 Maintenance Impor tant: • If the lter is damaged or becomes extremely dirt y , change it with a new lter . Contact your dealer for a new lter . • Use the dedicated lter only . Caution: Be sure to use the projector with an air-lt er .
EN-48 Before asking for repair of the pr ojector , check the following . If the symptom persists, stop using the projector , be sure to unplug the pow er plug, and then contact your dealer . No image appears on the screen. Pr oblem Solution P ower can not be turned on.
EN-49 No image appears on the screen. (continued) Pr oblem Solution “NO SIGNAL ” is displayed . • T ur n on the power of the connected device , or check whether there is something wrong with the connected device . • Check whether the external device output signals.
EN-50 Others Pr oblem Solution The exhaust vents emit warm air . • This air comes out after cooling the inside of the projector . Y ou may feel hot, but this is not a malfunction. The menu can ’t be used. • The microcomput ers inside the projector may be wrongly operating because of noise .
EN-51 T roubleshooting (con tinued) Others (continued) Pr oblem Solution Images are not 3D . ※ The 3D emitter and 3D Glasses are sold separately . They are not supplied with this product. • Are the image settings switched to 3D mode? → Switch the mode to 3D mode .
EN-52 POWER indicator ST ATUS indicator Indicators This projector has two indicators , each of which shows the operation condition of the pr ojector . The follo wing oer solutions to possible problems . If these problem persist, turn the projector o and consult your dealer .
EN-53 The specications and outside appearance of the pr ojector are subject to change without prior notice. T ype HOME THEA TER PROJEC TOR Model HC77-80D/HC77-80DW Display technology 0.61 inch SXRD™ panel: 3 pieces (for R, G, B) (aspect ratio 16:9) Pix el: 1920 x 1080 = 2073600 pixels T otal 6220800 pixels Pr ojec tion lens F 3.
EN-54 Specications (continued) Specication of input signals in each input of the projector HDMI Signal mode Resolution (H x V ) Horizontal frequency (kHz) V er tical frequency (Hz) Normal mode (H x V )*1 480i60.00Hz(Double Rate) - 15.75 60.00 1440x1080 480i59.
EN-55 *1 This mode shows the displa y area when Aspect Ratio in the Screen menu is set to Standard . Impor tant: • Some computers aren ’t compatible with the projector . • The projector’ s maximum resolution is 1920 x 1080 pixels . I t may not display images of higher resolutions than 1920 x 1080 correctly .
EN-56 Specications (continued) Connectors SERIAL (D-SUB 9-pin) Pin No. Name I/O 1 GND – 2 RXD IN 3 TXD OUT 4 GND – 5 GND – 6 GND – 7 – – 8 – – 9 GND – COMPUTER IN (Mini D -SUB 15-pin) Pin No.
1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M IT SUBIS HI ELECTRIC CORPORA TIO N A.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Mitsubishi Electronics HC9000DW c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Mitsubishi Electronics HC9000DW - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Mitsubishi Electronics HC9000DW, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Mitsubishi Electronics HC9000DW va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Mitsubishi Electronics HC9000DW, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Mitsubishi Electronics HC9000DW.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Mitsubishi Electronics HC9000DW. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Mitsubishi Electronics HC9000DW ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
