Manuel d'utilisation / d'entretien du produit Navigator 3300 ICP du fabricant Mitel
Aller à la page of 49
USER GUIDE (3300 ICP).
Navigator User Guide ii NOTICE The information contained in this docum ent is b lieved to be accurate in all respects but is not warranted by Mitel Networks™ Corporation (MITEL ® ). The information is subje ct to change without notice and should not be constru ed in any way as a co mmitment by Mitel or any of its affiliates or subsidiaries.
Navigator User Guide iii ABOUT YOUR PHONE ........................................................................................ 1 Elements of Your Phone ...............................................................................................
Navigator User Guide iv Speaker Volume Control .............................................................................................. 15 Display Contrast Control .................................................................................
Navigator User Guide v Messaging – Cancel Callback ..................................................................................... 31 Messaging – Cancel All Callbacks ..........................................................................
Navigator User Guide vi.
1 About Your Phone Mitel 3300 Integrated Communications Platform The Mitel ® Navigator is a full-feature, dual port, dual mode telephone that provides voice communication over an IP network.
Navigator User Guide 2 Elements of Your Phone Each element is numbere d according to the call -outs (e.g. ) in Figure 1 on page 1. Element Function Volume and Contrast Controls ( UP ) and ( DOWN ) arrow keys control displ ay contrast and volume levels for the ringer, handset, and handsfree speakers.
Navigator User Guide 3 Ring/Message Indicator When the light is… it indicates that… Flashing rapidly Your phone is ringing Flashing slowly A Message or Callbac k Message is waiting at your ph one .
Navigator User Guide 4 To play music from your PC on your Navigator Ha nd sfree speakers: • Plug the Navigator audio cable into the appropriate port on your P C. For more detailed information on conn e cting PC accessories to the Navigator, refer to the Navigator Installation Guide shipped with the phon e.
Navigator User Guide 5 About the Navigator Task Bar Use the Navigator Task Bar to make calls and invoke features. You can p rog ra m Task Bar Personal Keys to speed call your contacts, l aunch PC applications, open PC documents like a Microsoft ® Word document, or navigate to a URL directly usi ng your browse r.
Navigator User Guide 6 Element Function Main Menu • Click the button to access Main Menu options including View – specify how you want your Navigator Task Bar to display when you launch it. Select from Normal , Always On Top , or Pop to Front .
Navigator User Guide 7 Display the Task Bar To display the Task Bar if it is hidden or minimized it on your screen, do one of the following: • Double-click the Task Ba r appli cation tray icon ( ) or desktop icon . • Right-click the Task Bar application tray icon ( ) and sele ct Restore .
Navigator User Guide 8 Use the Task Bar Tray Icon Menu The Task Bar tray icon ( ) is located on your Windows tool bar. The tray icon menu provid es the following options: • Restore – restores the Task Ba r when it is hidden. Enabled only when the Task Bar is hid den or minimized.
Navigator User Guide 9 • Launch a PC application • Open a document • Open a URL • Hide or display the Navigator Task Bar • Display Navigator Keys Help legend.
Navigator User Guide 10 Program a Feature Key You can program any number of telepho ny Featur e Task Bar keys, but you cann ot program a Feature key more than once on the sa me Butt on Page. For example, you ca nnot pro gram two Call Logs keys or two Headset keys on the same Button Page.
Navigator User Guide 11 To program a Task Bar Feature key: 1. Right-click the Task Bar key. 2. Select Edit… 3. Select Telephone Function from the Feat ure menu 4. Select the desired feature from the Select a telepho ne feature… drop-down menu (for example, Do Not Disturb).
Navigator User Guide 12 4. Click Bro wse… , navigate to the document and click Open . 5. (Optional) Press Name icon to apply the %NAME% command line parameter to the application being launche d. The Name command inserts the name of the curre nt or last- incoming caller when you pre ss the Open Document key.
Navigator User Guide 13 5. Click Save . Program a Navigator Keys Help Key 1. Right-click the Task Bar key. 2. Select Edit… 3. Select Navigator Keys Help from the Feature menu. 4. Type the desired label for the key in the Label field. Note : If you do not enter a label, the Label field displays Show Keys Help .
Navigator User Guide 14 Task Bar Shortcuts For detailed information about usin g the Ta sk Bar buttons, keys, and controls, see Use the Navigator Task B a r on page 6. You can use the shortcuts in Table 2 to n avigate through and use some Task Ba r menu s and features.
Navigator User Guide 15 Customizing Your Phone Ringer Volume Control To adjust the ringer volume while your phone is ringi ng: • Press ( UP ) or ( DOWN ). To adjust the ringer volume on your phone while you r phon e is idle: 1. Press ( SUPERKEY ). 2.
Navigator User Guide 16 For more information on using the Desktop Tool, contact your Syst em Administrator. Tip: To dial or launch features using your mouse or Personal Key s, see Use the Navigator Task Bar on page 6. Display Key Programming Note: You can also vie w a nd pro gram Personal Keys using your Navigator Task Bar.
Navigator User Guide 17 Use PC Accessories You can connect PC accessories to you r Navigator to • Play music from your PC on the Navigator Handsfre e speakers. • Listen to music from your PC through a PC headset that is co nnected to the Navigator and be ready to receive or make a call in Headset mode.
Navigator User Guide 18 Making and Answering Calls Make a Call 1. Lift the handset (optional). 2. If you want to use a Non-Prime Line, press a Line App earance key. 3. Do one of the following: • Dial the number. • Press a Speed Call Personal Key. • Press ( REDIAL ).
Navigator User Guide 19 Redial To redial the last number that you manually dialed: 1. Lift the handset (optional). 2. Press ( REDIAL ). Redial - Saved Number To save the last number that you manually dialed: 1. Lift the handset (optional). 2. Dial **79 .
Navigator User Guide 20 9. Do one of the following: • To enter a new number, dial the number. Press ( HOLD ) between digits to create a pause during dialing—press ( HOLD ) more than once to lengthen the pau se. • To enter a trunk flash, press ( TRANS/CONF ).
Navigator User Guide 21 To use Handsfree Ope rati on to answer calls: 1. Press the flashing line key. 2. Begin speaking. Your pho ne’s Handsfree microphone and H andsf ree speaker transmit and receive audio. To hang up while using Handsfree Operation: • Press ( SPEAKER ).
Navigator User Guide 22 To answer calls using your PC head set: 1. Press the flashing line key. 2. Begin speaking when the called party answ ers. Your PC headset microph one and earphones transmit and receive audio. To hang up while using your PC headset: • Press ( CANCEL ).
Navigator User Guide 23 To answer a call with a Mitel Headset: • Press flashing Line Appearance key or • Quickly press and release the headset's f eature control swit ch (if available). Note : If Auto-Answer is enabled on your phone, s ee the “Auto-Answer” section else wh ere in this guide for call-anwering procedu res.
Navigator User Guide 24 To end a call, do one of the following: • Press the HangUp softkey. • Press ( CANCEL ). • Wait for the caller to hang up.
Navigator User Guide 25 Call Handling Hold The Navigator allows a maximum of four calls on Hold at one time. To place a call on Hold: 1. Press ( HOLD ). The associated Line key flashe s. 2. Hang up the handset, if desired. To retrieve a call from Hold: 1.
Navigator User Guide 26 3. Do one of the following: • To complete the Transfer, hang up. • To announce the Transfe r, wait for an an swer, consult, and hang up. • To cancel the Transfer, press ( CANCEL ). To transfer an active call during head set operation: 1.
Navigator User Guide 27 To add a call on Hold to an existing conversation o r conference: 1. Press the Addheld softkey. 2. Press the flashing line key. Swap To call another party when you are in an establi shed two-party call: 1. Press ( TRANS/CO NF ).
Navigator User Guide 28 To turn Call Forward on and off (once it has been programm ed): 1. Press ( SUPERKEY ). 2. Press the No softkey until "Call Forwarding?" appea rs. 3. Press the Yes softkey. 4. Press the Next softkey until the type of Call Forward appe ars.
Navigator User Guide 29 6. Press the TurnOff softkey. 7. Press ( SUPERKEY ). Call Forward – End Chaining To ensure that calls do not get forw arded again by the destination number: 1. Lift the handset. 2. Dial *64 . 3. Hang up. To again allow calls to be forwar ded by the de stinatio n number: 1.
Navigator User Guide 30 To turn Messaging – Advisory off: 1. Press ( SUPERKEY ). 2. Press the No softkey until "Advisory Msgs?" appears. 3.
Navigator User Guide 31 4. Do one of the following: • To enter a new password, enter your pa sswo rd. • To change or clear your passwo rd, enter your current password.
Navigator User Guide 32 Using Advanced Features Account Codes To use Forced Account Codes: 1. Lift the handset. 2. Dial the Account Code digits. 3. Press # . To enter an Account Code during a call: 1. Press ( SUPERKEY ). 2. Press the Yes softkey. 3. Dial the Account Code digits.
Navigator User Guide 33 Call History Call History keeps track of the names (if ava ilable) an d telephone numbers of missed calls, answered incoming external calls, and o utgoing external calls. On ce enabled on your phone by your system administrator, it functions automatically.
Navigator User Guide 34 To retrieve a call when you hear Campon tone: • Press the Trade softkey. Do Not Disturb To activate or deactivate Do Not Disturb: • Press the Do Not Disturb feature key. To activate Do Not Disturb from a remote station: 1. Lift handset.
Navigator User Guide 35 7. Do one of the following: • To respond to a page from your prim e page g roup, press # . • To respond to a page from a specific page group, di al the page group directory number. Hot Desking Hot Desking allows you to log into the telephone sy stem from any phone designated as a Hot Desk phone.
Navigator User Guide 36 ring the cell phone simultaneously, until one or the ot her is a nswered, or if unanswered, are forwarded to voice mail. For information about conf igurin g Mobile Extens ion on your Mitel IP device, refer to the Mobile Extension Quick Referen ce Guide availa ble at www.
Navigator User Guide 37 Paging To use Paging: 1. Lift handset. 2. Press the Pager feature key. 3. Dial the Paging zone number (if requi re d). 4. Make the announcement. Paging – Direct Direct Paging allows you to page a party thr ough the p arty’s han dsfree speaker.
Navigator User Guide 38 • To respond to a Direct Page wh en Handsfree Answerback i s OFF, see Direct Paging – Handsfree Answerback Disabled. Note : By default, Handsfree Answerback is turn ed OFF at your phone. If the ( MUTE ) key is OFF when your set is idle, Handsfree Answerba ck i s OFF.
Navigator User Guide 39 When Handsfree Answerb ack is disabled or turned of f on your phone and you receive a Direct Page, the Direct Page is indicated by a single bur st of tone. If your PC headset is plugged in, the Direct Page tone sounds i n your hea dset ear phones and you can answer using your headset.
Navigator User Guide 40 To start recording while on a two-party call: • Press the Record Call key. See Personal Feature Keys on page 15 for instruction s on programming a Record Call feature key to your phone. Note : Your system may be programmed to automatically begi n recording external calls when you or the other answers.
Navigator User Guide 41 Reminder To program a Reminder: 1. Press ( SUPERKEY ). 2. Press the No softkey until "Timed Reminder?" appears. 3. Press the Yes softkey. 4. Enter the time in 24-hour format. 5. Press the Save softkey. To view, change, and/or cancel a pending Remi nde r: 6.
Navigator User Guide 42 Trunk Flash The Trunk Flash feature allows you to access Centrex features (if available) while you are talking on an outside call. To flash a trunk while talking on an outside call: 1. Press (TRA NS/CONF). 2. Dial *57 for a single flash or *56 for a do uble flash.
®,™ T rademark of Corporation © Copyright 200 6 , Corporation All rights reserved Mitel Networks Mitel Networks.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Mitel Navigator 3300 ICP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Mitel Navigator 3300 ICP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Mitel Navigator 3300 ICP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Mitel Navigator 3300 ICP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Mitel Navigator 3300 ICP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Mitel Navigator 3300 ICP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Mitel Navigator 3300 ICP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Mitel Navigator 3300 ICP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
