Manuel d'utilisation / d'entretien du produit 79G-03775 du fabricant Microsoft
Aller à la page of 130
Deployment gui de for Microsof t Office 2013 Pre vie w Microsoft Corporatio n Published: Jul y 2012 Author: Microsof t Office System and Servers T eam (itspdocs@m icrosoft.com) Abstract This book s upports a prelim inary release of Microsoft Off ice 2013 Preview an d provides depl oyment instructions for Off ice 2013 Preview.
ii This document is pr ovided “as - is.” Information a nd views expres sed in this document, including URL and other Internet w ebsite references, may change wit hout notice. You be ar the risk of using it. Some examples de picted herein are pr ovided for illustration only a nd are fictitious.
iii Content s Getting help ................................................................................................................................ ............... ix Volume activation of Office 2013 Previe w ..................................
iv Create a network installation point ....................................................................................................... 16 Customize Setup .........................................................................................
v Remove registr y entries .................................................................................................................... 45 Delete/Modif y Registry Entry dialog box ...............................................................
vi Attributes ........................................................................................................................................... 63 AddLanguage attributes .......................................................................
vii RemoveLanguage attributes ............................................................................................................. 80 Example ....................................................................................................
viii Setup process .................................................................................................................................... 102 Setup sequence of events ................................................................ .....
ix Getting help Every effort has been made to ensure the acc urac y of this book. This c ontent is also available o nline in the Office System TechNet Librar y, so if you run into pr oblems you can check for updates at: http://technet.
1 V olume activation of O ffice 2013 Prev ie w Audience : IT Professionals Microsoft policy requ ires the activation of all editions of Office 2013 Previe w client software, includ ing Volume License edi tions.
2 Plan v olume activation of Of fice 2013 P revie w Audience : IT Professionals You can plan the de ployment of Off ice Acti vation Technologies f or volum e activation of Off ice 2013 Preview in several st eps. Before you read this article, we recom m end that you read Vol ume activation overview for Of fice 2010 .
3 You do not have to e nter a product ke y for Office 2013 Preview KMS clients. You only have to enter a KMS host ke y on your KMS host c omputer. If you decide to use M AK, enter the product k ey either t hrough the Of fice Custom ization Tool (OCT) or the Config.
4 connect to the KMS host f or activation b y using anon ymous remote procedure calls (RPCs) thro ugh TCP comm unications port 1688 , which is t he default port num ber when you enable the firewall o n a KMS host.
5 W indows Server 2008 R2 Publication of th e K MS service The KMS service uses service (SRV) resourc e records (RRs) in DNS to st ore and communicate the locations of KMS hosts. KMS hosts use d ynamic updat es, if available, to pub lish the KMS SRV RRs.
6 organizations can dep loy merel y two KMS hosts f or their whole infras tructure (one m ain KMS host and one backup host f or redundanc y). KMS activation renewal KMS activations are valid for 180 da ys. This is called t he act ivation validity interv al .
7 M A K Independ ent Activation MAK independe nt activation requ ires that each com puter independentl y connect and be activated with Microsoft, either o ver the Internet or by telephone. MAK independent acti vation is best suited f or com puters in an organ ization th at does not m aintain a connection to the cor porate net work.
8 2008, W indows Server 2008 R2, W indow s Server 2012, Of fice 2010, and Off ice 2013 Preview. In addition, VAMT 3.0 supports Active D irectory- Based ac tivation. The following feat ures are either ne w, or updated, i n VAMT 3.0: User interface.
9 Imp ortant: KMS hosts that were set up by using the Of fice 2013 P review release cann ot be used to activate client com puters that run the f inal release vers ion of Office 2013 Pre view.
10 not have adm inistrator perm issions to activate with MAK by setting the appro priate registr y key in the deployments or in the m aster im age: HKE Y_LOC AL_MACHINESoftw areM icrosoftOfficeSoftw areProtectionPlatform UserOpe rations = 1 This registr y key can also be set through the ospp.
11 V olume activation meth ods in Office 2013 Previe w Audience : IT Professionals Three volum e activation (VA) m ethods are ava ilable for O ffice 2013 Previe w: Key Managem ent Service (KMS) Multiple Activation Ke y (MAK) Active Director y-Based activation KMS and MAK are su pported on W indows 7 and W indows 8.
12 If you install the Office 20 13 Volume License Pack on Wind ows 7 T he KMS host instal ler prompts you to install and activate the KMS host ke y.
13 Generic V olume Licen se Keys (GVLK s) for Office 2013 Prev iew Product GVLK Office 2013 Profes sional Plus PGD67-JN23K-JG VW V-KTHP4-GXR9G Project 2013 Prof essional NFKVM-DVG7F-T YW YR-3RPHY-F872.
14 V ol ume Activation Management T ool (V AMT) 3.0 Volume Activation Managem ent Tool (VAMT) 3.0 is th e latest version. VAMT 3.0 is designed t o manage volum e activations f or W indows Vista, W indows 7, W indows 8, W indows Server 2008, W indows Server 2008 R2, W indows Server 2 012, Off ice 2010, and Office 2013 Pr eview.
15 Customize i nst allations of Office 201 3 Previe w Audience : IT Professionals The following tab le includes links to articl es about the c ustomization process an d about how to custom ize specific installations of Off ice 2013 Preview.
16 Customize S etup before inst alling Office 2013 Audience : IT Professionals To custom ize Setup for W indows Installer-base d Office 2013 Prev iew, follow the proc edures in this article before you begin the installation. In Office 2013 Previe w (as in Off ice 2010 and Off ice 2007), Setup controls th e complete installat ion.
17 deployment tool, such as M icrosoft S ystem Center 2012 Config uration Manag er, or to create a hard - disk image or a custom DVD. Make sure that acc ess to Office 2013 Pre view sourc e files is read -only. T he Setup.xml and Package .xm l files, such as ProPlusWW .
18 all Office 2013 Previe w products and la nguage pack s. Because the c ore Setup files are identical, there is no reas on to overwrite the f iles when you ad d language pac ks. If you deplo y multiple Office 2013 Preview prod ucts, cop y those files from the DVD to the installation point.
19 10. Select the I accept the t erms in the Lic ense Agreement check box. When you provide th is inform ation in a Setup custom ization file, users are not prom pted for a product ke y or Microsoft Software License T erms during the installation or the fir st time that the y start an Office application.
20 caused the failure. T o change logging opti ons, open the Conf ig.xm l file in Notepad and modif y the <Logging> e lement. For m ore inform ation, see C onfig.
21 Office Customi zation T ool (OCT ) in Office 2013 Previe w Audience : IT Professionals To custom ize an installation of Off ice 2013 Preview, you can use the Of fice Custom i zation Tool (OCT ) to .
22 If you use the OCT to change an existing .ms p customization file, we recom mend that you select the .msp file for the sam e product that you custom ize. For example, if you customize Office Pro fessional Plus 2013 Preview, s elect an Office Prof essional Plus 201 3 Preview custom ization .
23 Modify existing inst allations You can also use a Setup c ustomization file to ch ange an existing inst allation. Because a Setup custom ization file is an expanded form of a W indows Installer .msp f ile, you apply the custom ization file to the user's com puter exactly as you wou ld a software update.
24 Office Customi zation T ool options Section Page Setup Installation location a nd organizatio n name Additional network sources Licensing and user i nterface Remove previous i nstallations Add inst.
25 A rchitectur e-specific versions of the Office Customization T oo l The OCT provides two architecture -specif ic versions, one for 32 -bit Of fice 2013 Previe w and one for 64 -bit Off ice 2013 Preview.
26 mixed environm ents (32-bit and 64-bit) can do t he Setup custom izations one tim e and import the custom izations as follows:. Import the 32-bit Setup cus tomization .m sp files into 64 -bit OCT and the n use them to customize 64 -bit Off ice products.
27 import feature" video . Right-click the link , and then choose Save Target As to download a cop y. Choosing the link will open a .wm v file in the default video vie wer for full - resolution viewing.
28 viewer for full-res olution viewing. Setup Use the Setup section to specif y the following: Default installation locat ion Default organization name Additional network installation sour.
29 Not e: The OCT verifies all server paths and co nnects to an y available s ervers duri ng the initial installation process to lo ad balance the file c opy process when it creates the Loca l Installation Source (LIS). Ho wever, be aware that sp ecifying an un available source as an additional sourc e does not cause the insta llation to fai l.
30 Imp ortant: This inform ation applies to volum e-licensed editions of Off ice 2013 Preview. I t does not apply to either Of fice Profess ional Plus for Off ice 365 or O ffice 365 ProPlus Preview, both of which are licensed throu gh subsc ription.
31 None prevents prom pting users in these cases. The Supp ress modal option does not prevent files- in -use m essages from being displayed; only Display level s et to None prevents files- in -use m essages from being displa yed.
32 By default, Setup rem oves earlier vers ions of Off ice applications. To k eep an installed Of fice application, choose Remov e previous installation s in the OCT, and, in the res ults pane, s elec.
33 Not e: Do not add a program that requires the com puter to be restarted, unless it is the last program in the list. If a custom program restarts the com puter, the Off ice installation will be com plete. However, the custom programs that appe ar later in thi s list will not run.
34 Office security set tings Customize the securit y settings for O ffice applications. Imp ortant: Security settings specif ied in a Setup custom ization (. ms p) f ile provide only initial default settings on users' c omputers. Users can change the settin gs after installation.
35 Setting Description Remove all Trusted Lo cations written by OCT du ring installation Clears the Trusted Loca tions list on the user's com puter. Use this check box to clear the T rusted Locati ons list on the us er's computer without addi ng ne w locations.
36 Setting Description code in all docum ents can run) A dd -ins and temp lates (P roject 2013 Previe w only) Trust all installed add- ins and tem plates Do not trust installed a dd-in s and tem plates Security level (Projec t 2013 Previe w only) Very High – Onl y macros installed in trust ed locations will be able to run.
37 Modify Setup properties Modify Setup properties t hat are applie d during the Of fice installation. You can cus tom ize Setup properties onl y when you first install Off ice on a user's c omputer. Properties set in a custom ization file do not take eff ect if you appl y the file to an ex isting installat ion.
38 Microsoft O neNote 2013 Microsoft O utlook 2013 Microsoft Pow erPoint 2013 Microsoft Project 2013 Microsoft Publisher 2013 Microsoft SharePoint D esigner 2013 Microsoft .
39 configuring the setting, c hoose Cancel . You c an also return a s etting to the Not Configu red state by double-cl icking the setting, se lecting Not Co nfigured , and choosing OK . Set feature inst allation st ates Customize ho w Office features are i nstalled on t he user's computer.
40 Not e: The following subcom ponents of Publisher 20 13 Previe w are not visible in the Se tup feature installation state tree in the Off ice 2013 Preview releas e: Comm ercial Printing and the .
41 T ip: The best use of the Hide setting is to simplif y the feature tree for users . For exam ple, you might hide the Off ice Tools branch of the feat ure tree so that users do not hav e to decide which tools they need to install. On ly the tools th at you select are i nstalled.
42 To create a list of f iles to add to the user's computer during insta llation, choose Add , select the file that you want to add to the list, and choose A dd ag ain. To change the destinatio n path of a f ile, select the file in the Add custom files l ist and choose Modif y .
43 Remov e files Remove files from users' com puters when Off ice is installed. To create a list of f iles to remove fr om the user's computer during inst allation, choo se Add . To m odify the path or nam e of a file, select the f ile in the Re move files list and choose M odify .
44 To create a list of registr y entries to add to users' com puters, choose A dd . T o change an entr y in the list, select the entr y and choose Mo dify . To rem ove an entry from the list, select the entry and choose Remove . Choose Imp ort t o add a set of entries from a registry file (.
45 Setting Description Key Enter the nam e of the subke y where the entr y is stored. For example, SoftwareM icrosoftO ffice 15.0 Common . Create empty key Select this check box if the registr y entry does not cont ain a value nam e or value data. Some settings are determ ined by the presence or absence of the re gistry entr y.
46 Configure sho rtcut s Add shortcuts to files th at are installed with Office 2013 Previe w or files that were alread y on the user's computer. You can c onfigure shortcuts on ly when you first install Office on a user' s com puter. T his option is ignored if you apply the Setu p customi zation file to an existing insta llation.
47 Setting Description menu. [DesktopFolder] : W indows Desktop folder. [INSTALLLOC A TIO N] : T he folder in which Off ice is installed. [FavoritesFolder] : T he user's Favorites f older. [AppDataFolder] : T he user's Application Data f older.
48 Vir tual key names and hexadecimal key co des Virtual Key Name Ke y Code (Hex) Description VK_0 – VK_9 30 - 39 Keys 0-9 VK_A – VK_Z 41 - 5A Keys A-Z VK_NUMPAD0 – VK_NUMPAD9 60 - 69 Keys 0-9 on the n umeric k ey pad VK_F1 .
49 Virtual Key Name Ke y Code (Hex) Description VK_HELP 2F HELP ke y VK_MULTIPLY 6A Multiply key VK_ADD 6B Add key VK_SEPARAT OR 6C Separator ke y VK_SUBTRACT 6D Subtract ke y VK_DECIMAL 6E Decimal k .
50 Setting Description with the second opt ion, Outlook cr eates a profile that is based on the options that you choose in the other Out look s ections of th e OCT . Outlook uses the default prof ile nam e or uses the profile name tha t you specif y. New profile Create a new profile o n the user’s c omputer and m ake it the default prof ile.
51 have unique nam es. The f ollowing table shows how Outlook determ ines whether a new acc ount of the same type as an exist ing account can be added to the Setup custom ization file.
52 More Exchange S erver Settings Choose the M ore Settings button in the Exch ange Settings di alog box to configure Exc hange Server offline use options and t he Outlook Anywhere feature. Exchange Use the following o ptions to configure us er’s Outlook prof iles for off line use and Outlook An ywhere.
53 Cached M ode Use the following o ptions to configure us ers' Outlook profiles to use a local cop y of the Exchang e mailbox. Cached M ode optio ns Option Description Do not configure Ca ched E.
54 Choose the Expo rt Profile Settings button to sa ve the Outlook profile settings that you have de fined in a .prf file. T ip: An efficient wa y to create an Outlook .prf f ile is to use the OCT to m ake selections and the n export them to a .prf file, even if you are not using a Se tup custom ization file when you deploy Office.
55 Modify Group dialog box W hen you chang e a group, s elect from the following options in the Modify Group dialog box and then choose OK . Select the options sho wn in the following table un der S elect options for this S end/Receive g roup .
56 Rename Exchang e Group dialog b ox Enter the new nam e of the Exchang e send/receive gro up in the New Group Name box a nd then choose OK . Send/Receive sett ings for the selec ted group Specify settings for the Send/Rece ive group that is sel ected in the list.
57 details are not includ ed in the offline addr ess book. T his is a legacy option that is supported b y Outlook Address book (OAB) versions 2.0 a nd 3. 0. If Outlook connects to a ser ver that supports OAB 4.0 or a later version, the full detai ls are downloa ded even if this optio n is selected.
58 Config.xml fi le in Office 2013 Prev iew Audience : IT Professionals Administrators use the C onfig.xm l file to perform install ation and m aintenance tasks f or Office 2013 Preview.
59 Config.xml element quick reference The following table lists the Config.xm l elements. T hese elem ents can appear in an y order, except for Configuration elem ent , whic h must be f irst, and elements suc h as Com mand elem ent , whose order in Config.
60 Element Description SetupUpdates elem ent The search path for S etup to us e to find Setup custom ization files USERINITIALS e lement The initials of the us er on whose computer the produc t is being installed USERNAME elem ent The nam e of the user on whose computer the produc t is being installed How Setup uses Config.
61 AcceptEula="yes" /> T ip: For long elem ent definitions, put attrib utes on separat e lines and use inde ntation to m ake the file easier to read.
62 The Display opt ions in the previous ex ample direct Se tup to run a silent inst allation, to prevent users from being prom pted to enter inform ation, and to pre vent the installation from waiting for an y user interaction. Config.xml element reference The following convent ions are used in the descriptio ns in this reference.
63 Remarks The Product attr ibute identif ies the product aff ected by this Config.xm l file. The pr oductID is defined in the Setup.xm l file that is located in the cor e folder for the prod uct, in the ID attribute of the Setup element.
64 Attribute Value Description AddLanguage e lement is specified, on e (and only one) langua ge must specif y the ShellTransform elem ent. Remarks The language m ust be available on the n etwork installation p oint. You can have m ultiple elem ents for AddLanguage and Rem oveLanguage e lement .
65 In the previous exam ple, Setup insta lls all the specified langu ages and the Sh ell UI m atches the language of the user's locale. If m ore languages were availab le in the sourc e image, th.
66 Attribute Value Description No (default) Allows users to rem ove the product. ARPURLINFO ABOUT URL URL for the product's home page. ARPURLUPD A T EINFO URL URL for inform ation about product updates. ARPHELPLINK URL URL of a website where users can receive technical support.
67 Command attr ibutes Attribute Value Description Path path Fully qualified path of th e executable f ile. If the path value contains a space, you must use double quotati on m arks as shown in the following exam ple: " servershareOff ice 14copy logs.
68 Attribute Value Description x86 platform . This comm and runs onl y if the computer on which the installation is run matches this platform requirem ent. x64 Specifies that this program requires a 64 - bit processor that supports the x64 exte nsions to the x86 architecture.
69 Setting the Wait attr ibute to 0 m illiseconds indicates no waitin g after you run th e program bef ore you continue the instal lation. The com mand will execute an d move on imm ediately. Return codes are on ly respected if the Wait value is non zero.
70 Example <COMPANYNAME Value="Microsoft Corporation" /> Display element The level of UI that S etup displa ys to the user. T ip: The equivalent opti on in the OCT is the Di splay level and license agreem ent settings in “ Licensing and user interf ace ” in Office Custom ization Tool (OCT ) in Office 2013 Preview .
71 Attribute Value Description the completion not ice. No (default) Only applies if Lev el is set to "basic": Setup does n ot display the completion notice. SuppressM odal Yes Only applies if Lev el is set to "basic": Setup does n ot displa y error m essages and other dialog boxes that m ight interrupt the installation.
72 Administrators m ust also mak e sure that no Of fice applications run during an installat ion of the Office 2013 Previe w. If you set the Displa y Level value to “basic” an d SuppressM odal to “ yes”, users m ight be prompted if an y Office files are bein g used.
73 Example <DistributionPoint Location="server1office" /> INST ALLLOCA TIO N element Specifies the full y qualified path of the folder on the us er's computer where the product is insta lled. T ip: The equivalent opti on in the OCT is the Def ault installation path setting in Installation loc ation and organization nam e .
74 /> A ttributes The following table d escribes LIS elem ent attributes and values. LIS attributes Attribute Value Description CACHEACTION CacheOnly Setup copies the LIS t o the user's computer, but do es not install the product. Not e: Do not use Command elem ents in a Config.
75 If you specif y INSTALLLOCAT ION element , the drive des ignation in the path is us ed to determ ine on what drive the LIS is c reated. For exam ple, if the INSTALLLO CATION el ement path is E: officef iles , the LIS is created on dri ve E.
76 Attribute Value Description that is specified alread y exists , log inform ation is appended to the existin g file. The .txt file nam e extension m ust be included. The defau lt template is SetupExe(*).log . Remarks You can specif y a * anywhere in the T emplate value.
77 Imp ortant: In most situations, we recom mend that you use the O CT to change the inst allation state of features. The equival ent option in the O CT is Set featur e installation states .
78 Publisher Tem plates and the Bus iness Publications an d Other Publica tions subcom ponents Example <OptionState Id="ExcelAddinFiles" State="Absent" Children="force" /> PIDKEY element The 25-character vol ume lic ense key.
79 A ttributes The following table d escribes PIDKEY elem ent attributes and values. PIDKEY attributes Attribute Value Description Value 25 -character-k ey The 25-character v olume lic ense ke y . Remarks W hen the PIDKEY value is set, users are not required t o enter a product k ey when the y install Office.
80 Remov eLanguage attributes Attribute Value Description Id ll - cc The language identif ier. Remarks If the language is not ins talled on the user's com puter, the R emoveLanguage elem ent is ignored. You can have m ultiple elem ents for AddLanguag e elem ent and R emoveLanguage .
81 Remarks Not all W indows Installer properties can be specif ied in the Setting e lement. If a block ed property is specified, Setup ends t he installation proc ess. If a sup ported propert y is specified, Setup passes the property directl y to W indows Installer.
82 3. In the Value box, t ype 1 , a nd then click OK . The Setting elem ent supports the REM OVEPREVIOUS pro perty. This propert y removes the specifie d application from the installation and uses th e following s yntax.
83 A ttributes The following table d escribes SetupUpdates elem ent attributes and values. SetupUp dates attributes Attribute Value Description CheckForSUpdates Yes (default) Setup uses the path list in SUpdateLocation to find Setup custom ization files.
84 Synt ax <USERINITI ALS Value=" valu e " /> A ttributes The following table d escribes USERINIT IALS element attributes and valu es. USERINITIA LS attributes Attribute Value Descript.
85 If the user who is runni ng Office is not the sam e user who installed Of fice, Office prom pts the user to confirm his or her Us ername and Init ials when Of fice first starts . This case is m ost popula r in a corporate environm ent, where an adm inistrator installs Office for the user.
86 Setup comm and-line options for Offic e 2013 Previe w Audience : IT Professionals The Setup.exe comm and line is used f or very few ope rations in Office 201 3 Preview (just as in Office 2010 and Microsof t Office 2007). Setup reco gnizes the c ommand -line optio ns that are descr ibed in this article.
87 being installed and applies the file during the installation. T he Updates folder c an only be used to deploy software updat es during an initial installation of Office 2013 Previe w. If you store more tha n one custom ization file per produc t in the Updates f old er, Setup app lies all the files to the installation.
88 /r ep air [ProductID] Runs Setup to repa ir the specified pr oduct from the user’s com puter. Look up the value of [ProductID] in the Setup.xm l file for the product t hat you want to m odify. Example servershareOffice 15set up.exe /repair ProPlus where: Office15 is the root of the network installation point.
89 ProPlus is the [ProductID] ( [ProductID] is equal to the ID a ttribute of the S etup elem ent listed in serv er shareOffice15Pr oPlus.WWsetup.xm l ), where P roPlus.WW is the location of the Office Professional Plus 2013 Preview installation f iles.
90 Customize the Accessibili ty Checker for Office 2013 Preview The Accessibilit y Checker in Of fice 2013 Preview lets users create m ore accessible docum ents for people who have disa bilities.
91 Group Policy settings for Ex cel 2013 Prev iew Setting for Excel 2013 Preview Associated registry key Description Stop checking for alt t ext accessibilit y information AltText If enabled, the Acces sibility Checker does not determine whether objects such as images and sh apes contain alternative text.
92 Setting for Excel 2013 Preview Associated registry key Description whether tables ha ve merged cells. If disabled or not configured, work sheets are checked f or merged cells and any issues that it f inds will appear in the Accessibility Check er.
93 Group Policy settings for Po w erPoint 2013 Prev iew Setting for PowerPoint 2013 Preview Associated registry key Description Stop checking for alt t ext accessibilit y information AltText If enabled, the Accessibility Check er does not determine whether objects such as im ages and shapes contain a lt text.
94 Setting for PowerPoint 2013 Preview Associated registry key Description configured, tables are checked f or header rows and any issues that it f inds will appear in the Accessibility Check er.
95 Setting for PowerPoint 2013 Preview Associated registry key Description sure that each slide h as a unique title Accessibility Check er does not determine whether every slide has a un ique title. If disabled or not configured, slide t itles are checked f or uniqueness and any issues that it f inds will appear in the Accessibility Check er.
96 Group Policy settings for W o rd 2013 Previe w Setting for Word 2013 Preview Associated registry key Description Stop checking for alt t ext accessibilit y information AltText If enabled, the Acces sibility Checker does not det erm ine whether objects such as images and shapes contain a lt text.
97 Setting for Word 2013 Preview Associated registry key Description Stop checking for m erged and split cells 2DTableStructure If enabled, the Acc essibility Checker does not det erm ine whether tables ha ve merged or split cells.
98 Setting for Word 2013 Preview Associated registry key Description succinct. If disabled or not conf igured, document headings are check ed for length and an y issues that it finds will appear in th e Accessibility Check er.
99 Setting for Word 2013 Preview Associated registry key Description issues that it finds will appear in the Accessibilit y Checker. Stop checking for tabl es used for layout LayoutTablesReadingO rder If enabled, the Acces sibility Checker does not f lag layout tables (that is, tables that have no style applied).
100 Roll out Office 2013 Prev ie w Audience : IT Professionals The following tab le lists and describ es ar ticles that will help you deploy Off ice 2013 Preview.
101 Setup architectur e overvie w f or Office 2013 Previe w Audience : IT Professionals The Setup architecture in Office 2013 Preview, introdu ced in Microsoft Of fice 2007, stream lines all aspects of installing, c ustom izing, and maintaining Of fice.
102 Consolidated updat e process Setup process T y pically, the first s tep in a corporate installation of Office is to create a network installation point, a task as easy as cop ying all files and fol ders from the Off ice product CD to a share d network location.
103 You can circum vent the selection proc ess and determ ine which Of fice product is ins talled by pointing Setup.exe to the Conf ig.xml file in a core product f older. For exam ple, if you want to ins tall Office Professional Plus 2013 Preview, you can use the following com mand line: servershareOffice 15ProPluss etup.
104 Read XML dat a Setup collects inform ation about each pack age on the installation point, co llects def ault settings for the installation, and incorp orates custom izations that you s pecify. Setup collects a ll this inform ation in the form of XML data from several sources: Setup.
105 .msp file for Visio Profes sional 2013 Prev iew in the Updates f older. The custom ization .ms p files that you place in the Updates f older will be deplo yed first. Theref ore, they must include an y Setup custom izations that cannot be changed af ter the installation, for ex ample, the installation location.
106 Users who appl y software updates are less likely to be prom pted for a net work or CD sourc e because an installati on source is available loca lly. You can deplo y the local installation source in advance and trig ger the installati on of Off ice on users' computer s later to reduce the load on the netwo rk.
107 Not e: W hen you precac he the local installation source, Setup copies the Updates folder fr om the network installation p oint to the local ins tallation source. In this m anner, your customizations can be included in off line installation scenar ios.
108 Running Setup interactively You can choose to run t he installation qu ietly so that us ers see little or none of the process. However, if you let users view the Setup user interf ace, the choice s that you m ake affect several aspects of S etup behavior.
109 Languag e versions of Office Every Office product m ust include at least on e set of langua ge -specific pac kages. You cann ot deploy just the core pack age (MSI file) by itself . On the Off ice product CD and the net work installation point, these language pack ages are contained i n folders.
110 not identical to the core version with a Japanese MUI pack . T his design was simplified and improved in Off ice 2007 and is the sam e in Off ice 2013 Preview and Of fice 2010.
111 Not e: W e recommend that enterprise cus tomers first uninstall any earlier versions of Off ice before they install W indow s Installer-base d Volum e License editions of Office 2013 Preview. Determine which Of fice features are insta lled. Specify the default values for m any user optio ns, including Out look settings.
112 Making last-m inute or one- off customi zations that do not warrant running the OCT to create a ne w custom ization file. If you put the Confi g.xml f ile in the same f older as Setup.exe, Setup finds an d uses the file. You can also specif y the location of the file b y using the /config Set up comm and-line option.
113 Menu comm ands and their corr esponding too lbar buttons Shortcut ke ys Most options in the Options dial og box Not e: Most of the Off ice 2013 Preview polic y settings are also a vailable in the OCT (OPA settings). To configure initial def ault settings i n a Setup custom ization .
114 Creating a lo cal inst allat ion source o n users' computers W hen users install Office from a DVD or from a net work installation point, S etup creates the local installation source b y using a program called the Off ice Source Engine (Ose.exe) to cop y required installation files to a hidden folder on the local com puter.
115 Setup from a specific folder installs that product. This m ethod lets users ins tall Office without re lying on a network c onnection. For more inf ormation, see Install Of fice 2010 from local installation source .
116 Up dating existing Office inst allations After Office is installed, you apply sof tware updates dir ectly to the client com puter without ret urning to the network insta llation point.
117 Language in Office 2 013 Previe w Audience : IT Professionals The following tab le lists and describ es articles that will help you Configure Of fice 2013 Pre view to work with m ultiple languages.
118 Security in Office 2013 Previe w Audience : IT Professionals New securit y controls are available in Of fice 2013 to h elp you plan a robust d efense against threats while maintaining inf orm ation worker productivit y.
119 V irtualize Of fice 2013 Prev ie w Audience : IT Professionals You can deplo y Office 2013 Previe w by using virtualiz ation technologies, such as Microsoft Applicati on Virtualization (App- V) or Rem ote Desktop Services (f orm erly known as Term inal Services).
120 Group Policy for Office 2013 Prev ie w Audience : IT Professionals Group Policy is an infr astructure that is used to deliver and apply one or m ore desired configuratio ns or policy settings to a set of targeted users and com puters in an Active Director y directory service environment.
121 Outlook 2013 P revie w Audience : IT Professionals To plan an Outlook deploym ent or configure Outlook Anywhere, Cached Exchange Mode, an d security and protection features, or to cust om ize Outlook prof iles, follow the steps that are desc ribed in these articles.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Microsoft 79G-03775 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Microsoft 79G-03775 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Microsoft 79G-03775, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Microsoft 79G-03775 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Microsoft 79G-03775, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Microsoft 79G-03775.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Microsoft 79G-03775. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Microsoft 79G-03775 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
