Manuel d'utilisation / d'entretien du produit MV-DVD-PL3 du fabricant Magnadyne
Aller à la page of 24
Owner's Manual Mobile DVD Player Model: MV-DVD-PL3 For operational or technical assistance, after reading this manual, please call us toll free at (800) 638-3600.
2 Features Compatible with P AL and NTSC Systems This player can play discs recorded in either P AL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoder .
3 Safety Information . . . . . . . . . . . . . . . . . 3 Disc Notes . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . 5 Electric Connection . . . . . . . . . . . . . . . . . 6 DVD Unit Functions .
Disc Formats Supported by this Player: Discs which Cannot be Played with this Player: • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Handling and Cleaning • Dirt, dust, scratches and warping disc will cause non operation. • Do not place stickers on disc or scratch disc.
5 Note: 1. First remove the two screws that lock the player mechanism (see figure below). Then attach the brackets on both sides of unit with the M4x5 screws. Next, install the unit with the M5x25 screws. 2. When mounting the unit, slide the screws to the left or right side to meet desired position.
6 MV-DVD-PL3 MV-DVD-PL3 MV-DVD-PL3 Male/Male Jumper Cable (not supplied) Infrared Eye (supplied with DVD) Connecting to a VCR as an Auxiliary Source VCR with AUX IN MV-DVD-P A WC3-XX (not supplied) MV.
7 DVD • CD • CDRW • MP3 PLA YER 12 3 4 5 6 9 7 8 Loading a DVD/VCD/CD Disc 1. T urn the car ignition on to the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically .
8 1 3 7 11 14 15 19 18 21 23 22 24 20 17 16 13 12 10 28 27 32 25 29 30 26 4 8 5 2 6 31 9 Remote Control Preparing the Remote Control Inserting the Batteries: 1. Open the battery compartment cover . 2. Insert the two AAA size batteries. Make sure that the positive and negative terminals of the batteries are oriented correctly .
9 1. POWER : T urns the unit ON or OFF . 2. EJECT : Ejects the disc. 3. MUTE : Mutes the sound. 4. SUBTITLE : Changes the SUBTITLE language on multi-subtitle language DVD disc. 5. ANGLE : Changes the view angle on multi-angle DVD disc. 6. DISPLA Y : Displays statistical disc information during playback.
Stopping Play Press the ■ STOP button to stop the disk playback. Pressing the PLA Y button, the disk will continue with normal play- back. Press the ■ STOP button twice, to stop the playback and go back to initial T rack/Chapter . Rapid Forward/Rapid Reverse Press F F and REW during play .
Disc Search (GOTO) DVD: Press GOTO button twice. The screen will display the following message: Y ou can select the item you want to watch using the TIME setting by using the numeric buttons and the ENTER button.
Basic Operation 3. Press DISPLA Y for a third time: 4. Press DISPLA Y for a fourth time: 5. Press DISPLA Y for a fifth time and the message on the screen will be cleared. VCD: 1. Press DISPLA Y for the first time: 2. Press DISPLA Y for a second time: 3.
13 Basic Operation Multi-Audio Language Function DVD: Press AUDIO during playback. Each time the button is pressed, the number of the audio soundtrack language changes in sequential order . Notes: • The language number is different according to the disc.
MP3 Disc Play: MP3 disc is playing as the format of FOLDER. Example: Use to select the item or folder , then press the ENTER button. Pressing the REPEA T button continuously selects from three types of repeat play modes: REP-ONE: Plays one song continuously .
15 – INITIAL SETUP – 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player in the STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferred item by using the buttons. 4. Press ENTER button. A. GENERAL SETUP This setup page includes all the items of TV display and audio output feature.
Setup TV DISPLA Y PIC MODE ANGLE MARK OSD LANG CAPTIONS SCR SA VER MAIN P AGE AUTO HI-RES N-FLICKER PIC Mode Setup • Select AUTO, the player PIC mode will depend on DVD disc. • Select HI-RES format for best image resolution. • Select N-FLICKER mode format if image or picture has noise.
17 Setup TV DISPLA Y PIC MODE ANGLE MARK OSD LANG CAPTIONS SCR SA VER MAIN P AGE ON OFF SCR Saver Setup Select the SCR SA VER output ON or OFF . DOWNMIX MAIN P AGE LT / RT STEREO SPEAKER Setup This activates the audio output from DOLBY AC3 5.1 DOWNMIX to 2-Channel mode.
Setup AUDIO OUT OP MODE DYNAMIC LPCM OUTPUT MAIN P AGE FULL 6/8 4/8 2/8 OFF DYNAMIC RANGE CONTROL Select DYNAMIC and adjust the dynamic range of the Dolby Digital encoded pro- gram.
19 Setup TV TYPE AUDIO SUBTITLE DISC MENU P ARENT AL P ASSWORD DEF AUL TS SMAR T NA V MAIN P AGE ENGLISH FRENCH SP ANISH CHINESE JAP ANESE SUBTITLE LANGUAGE Setup Select the preferred SUBTITLE language by using the CURSOR buttons.
Setup RESET TV TYPE AUDIO SUBTITLE DISC MENU P ARENT AL P ASSWORD DEF AUL TS SMAR T NA V MAIN P AGE DEF AUL TS Select RESET to capture initial factory settings. NO MENU WITH MENU TV TYPE AUDIO SUBTITLE DISC MENU P ARENT AL P ASSWORD DEF AUL TS SMAR T NA V MAIN P AGE SMART NA V Select between NO MENU mode or WITH MENU mode.
21 If it appears that your DVD unit is faulty , first consult this checklist. Only qualified service personnel can remove the cover or service this player . Otherwise the warranty will become invalid. No Power: • Check to see if the player is set to "On".
22 Replacement Parts Order Form Send Orders T o : Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card A TTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation P . O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P .
Replacement Parts for MovieVision ® Systems ORDER BY MAIL DESCRIPTION MODEL # PRICE DVD Remote Control MV2000RM $39.95 EA. ONE (1) YEAR LIMITED W ARRANTY Magnadyne Corporation or its authorized agent.
MV-DVD-PL3 REV . C 6-9-04 © Copyright 2004 Magnadyne Corporation MV-DVD-PL3_Rev.C.qxp 6/14/04 4:31 PM Page 24.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Magnadyne MV-DVD-PL3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Magnadyne MV-DVD-PL3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Magnadyne MV-DVD-PL3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Magnadyne MV-DVD-PL3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Magnadyne MV-DVD-PL3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Magnadyne MV-DVD-PL3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Magnadyne MV-DVD-PL3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Magnadyne MV-DVD-PL3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
