Manuel d'utilisation / d'entretien du produit MIH-120 du fabricant Macsense Connectivity
Aller à la page of 30
. User ’ s Manual XRouter (MIH-120) R acse n se.
Copyright Copyright © 1999 by this company . All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transforma- tion) without permission from Macsense Connectivity , Inc.
Safety Precautions 1. Follow all warnings and instructions marked on the product. 2. Slots and openings on the device are provided for ventilation. T o protect it from overheating, these openings must not be blocked or covered. 3. Do not use or store this product in an environment that exceeds temperature and humidity specifications.
T able of Contents ABOUT THIS MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . .1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU ST ART . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Package Overview .
ABOUT THIS MANUAL This user manual describes how to connect a LAN to the Internet using the XRouter Internet Sharing Hub, MIH-120. This manual assumes you are familiar with the basics of personal computing and network environments.
INTRODUCTION Thank you for purchasing the XRouter MIH-120 Internet Sharing Hub. The XRouter functions as an easy-to-use communication device that allows you to connect a local area network (LAN) to the Internet affordably .
4-Port Ethernet Hub Inside In addition to providing Internet sharing capability , the XRouter also functions as an Ethernet hub, offering four 10BASE-T , RJ-45 ports that allow you to connect a series of computers to form a small LAN.
BEFORE YOU ST ART Package Overview Please check to make sure your XRouter package includes the items listed below before setting up your XRouter . __ an XRouter __ a power adapter __ this user manual .
EASY INST ALLA TION Hardware Installation Before connecting the XRouter to your LAN please verify that your cable or DSL service is active and operating correctly . If you are expe- riencing difficulties with your cable or DSL service, please contact your service provider before proceeding with this installation.
Connecting Computers to the XRouter When you have finished connecting the XRouter to your DSL or cable modem, you can begin connecting the Macintosh or PC computers in your local area network to the XRouter .
2. Plug one RJ-45 connector (of a standard twisted-pair Ethernet cable) to the XRouter ’s No. 4 LAN port. 3. Plug the other end of this Ethernet cable into an available port on the network hub. ( NOTE : Multiple network hubs can be connected to the XRouter ’s LAN ports No.
Software Configuration Setting Up the TCP/IP Congratulations on installing the XRouter ’s hardware! In the next pages we will show you how to enable communication between the XRouter and its managing and client computers.
4. T o install the TCP/IP protocol: a. Keep your copy of Windows 95/98 CD-ROM on hand. (Y ou will need it for this installation.) b. Click the Add... button from the Configuration list of the Network window . A new window appears. c. Double-click Protocol .
5. After double-clicking the installed TCP/IP protocol, the TCP/IP properties window appears. T o let the computer ’s TCP/IP values be automatically assigned by the XRouter ’s DHCP server: a. Click the IP Address tab from the TCP/IP properties window .
Assigning TCP/IP V alues Manually If you already have a DHCP server on the network, or if you prefer not using the XRouter ’s DHCP server to assign TCP/IP values auto- matically , you can input these values manually . T o enter values for the managing computer ’s address manually: 1.
Mac OS TCP/IP Configuration 1. Open the TCP/IP control panel. 2. In the Connect via menu select the Ethernet interface that is installed on your computer .
Assigning TCP/IP V alues Manually If you already have a DHCP server on the network, or if you prefer not using the XRouter ’s DHCP server to assign TCP/IP values auto- matically , you can input these values manually . T o enter values for the managing computer ’s address manually: 1.
Setting Up the XRouter Through a W eb Browser Now that you have finished configuring the TCP/IP addresses of the client and managing computers, you can begin configuring the XRouter ’s Internet settings. This can be done through a standard W eb browser (such as Netscape Navigator , Netscape Communicator, or Microsoft Internet Explorer).
5. The OnePage Setup window appears. Note that this page is divided into two basic sections -- Private IP Address, and Public IP Address. Host Name - This is an optional section. Some ISPs require a host name in order to be recognized by their systems.
2. Enter the static IP address provided by your ISP in the field located immediately to the right of “Specify an IP Address.” 3. Leave the Public Subnet Mask as the default setting. 4. In the Default Gateway IP Address field, enter the information provided by your ISP .
ADV ANCED CONFIGURA TION Please refer to the previous chapter on how to enter the Web Management page of the XRouter . The Advanced Menu contains four sub-menus including DHCP Settings, V irtual Server , Device Admin, and Status Monitor .
Virtual Server It is possible to set up your own Web or FTP server on your net- work for external Internet users to access. Internet users simply need to enter the IP address that has been assigned to you. The XRouter will redirect the request of the Internet user to the specified internal hidden IP address of the TCP port request.
Device Administration This page displays information about the firmware version and MAC address of this XRouter . Y ou can change the password or reset the device. Selecting Ye s to the Factory defaults erases previously configured settings, returning the unit to its original default settings.
Firmware Upgrade Macsense is continually improving the firmware (software pro- grammed on a PROM) in each of its products. The XRouter is shipped with the most up to date software available at production time. If a firmware upgrade becomes available, it will be posted in the “Service and Support” section of our Web site.
TROUBLESHOOTING This chapter provides solutions to problems that may occur during installation and operation of the XRouter MIH-120. 1. The Link LED is off . • Check that all connectors are firmly plugged-in. • Check the power adapter making sure it is plugged into an electrical outlet.
APPENDIX A - Specifications Standards Compliance IEEE 802.3 10BASE-T TCP/IP , DHCP , DNS W AN Interface One 10BASE-T RJ-45 port LAN Interface Four 10BASE-T RJ-45 ports Web management Ye s LED Display .
APPENDIX B - Hardware Description Power green Indicates that there is power to the unit. Ready/T est orange Flashes during boot up W AN Port Link green Indicates proper a connection with the Internet Ethernet connection. Activity orange Flashing LED indicates that data packets are flowing through the W AN port.
Rear Panel Description LAN Ethernet Ports - Four 10BASE-T Ethernet network (RJ-45) ports used for linking hub/computer in a Local Area Network to the XRouter . W AN Ethernet Port - One Wide Area Network port for connecting the XRouter to the Internet via a cable or DSL modem.
APPENDIX C - Glossary DHCP DHCP is a protocol for automatic IP configuration. Client side computer can get one IP from DHCP server automatically . Using DHCP can save the ef fort of setting IP for every LAN computers. Domain Name A name that identifies one or more IP addresses.
ISP Short for Internet Service Provider , a company that provides access to the Internet. For a monthly fee, the service provider gives you a software package, username, password and access phone number . Equipped with a modem, you can then log on to the Internet and browse the World Wide W eb and USENET , and send and receive e-mail.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Macsense Connectivity MIH-120 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Macsense Connectivity MIH-120 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Macsense Connectivity MIH-120, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Macsense Connectivity MIH-120 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Macsense Connectivity MIH-120, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Macsense Connectivity MIH-120.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Macsense Connectivity MIH-120. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Macsense Connectivity MIH-120 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
