Manuel d'utilisation / d'entretien du produit SC21FD3044-161 du fabricant LOREX Technology
Aller à la page of 43
Instruction Manual Co py ri g ht © 200 6 LOREX Technology Inc. English Versi on 2 .0 SC21FD3044-161 21” F LA T S CREEN CRT/DVR C OMBO.
I CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
II NOTE: This equipm ent has bee n certified an d found to com ply with the limit s regulated by FCC , EMC and L VD. Therefore, it is designed to provide reasonable protectio n ag ainst interference and will not cause interference wi th other ap pliance usage.
III CONTENTS 1 GENERAL PRECAUTIONS ................................................................................. 1 2 CAUTIONS AND FEATURES .............................................................................. 2 2.1 FEATURES 2 2.2 CAUTIONS 3 2.
IV 17 RECORDING TIME (IN HOURS) ....................................................................... 30 18 RECORDING TIME (IN GIGABYTES PER HOUR) ........................................... 31 19 INSTALLING THE HDD .................................
1 1 GENERAL PRECAUTIONS 1. Read Instructions: All of the safety and operating instructions should be read and understood before the product is used. 2. Retain Instructions: The safety and operating instructions should be reta ined for future reference.
2 2 CAUTIONS AND FEATURES 2.1 FEATURES System Features: • 21“ Color Quad with a high resolution of 450 TV lines • Video inputs : 8 BNC inputs / 8 Mini Din inputs • Audio inputs : 8 RCA inputs .
3 2.2 CAUTIONS 1 All the warnings and instruction s of this manual should be followed 2 Remove the plug from the outlet before cleaning. Do not use liq uid aerosol detergents. Use water damped cl oth for cleaning 3 Do not use this unit in very humid and wet places 4 Keep enough space around the unit for ventilation.
4 3 SYSTEM INCLUDES 21” Flat Screen CRT/DVR Combo NOTE: CHECK YOUR PACKAGE TO MAKE SURE T HAT YOU RECEIVED THE COMPLETE SYSTEM, INCLUDING TH E COMPONENTS SHOWN ABOVE.
5 4 GETTING STARTED 1 Connect the AC Power Cord to the AC Input of the 21” Flat Scre en CRT / DVR Combo and plug into an electri cal outlet. Connect the came ras into the camera inputs (BNC or DIN) found on the back of the Unit.
6 After the unit has completed it s internal diagnostic test, th e network information will be displayed (for a short period of time). (See below) The unit will then display the video image(s) from the camera. *** NETWORK INFORMATION *** MAC ADDRESS : XX XX XX XX XX XX IP ADDRESS : 192 .
7 REC STOP WTMK REC POWER HDD FULL TIMER ALARM PLAY REC USB STAND- BY ALRS EVENT SEARCH COPY PAN/ TI LT Q1/Q2 SEQ PIP/ POP MEN U VOLUME A-SEL TALK CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1 REC STOP WTMK REC ALR.
8 2 QUAD BUTTON Pressing this button goes to Quad viewing mode, eith er Page A (Q1) or Page B (Q2). 3 SEQ BUTTON Used to automatically sequence bet ween all camera locations in full scree n view. Press SEQ again to stop sequential viewing. Sequence setti ngs are programmable via the Menu.
9 By pressing and holding this button the user ha s the ability to talk to a specific camera location. This button must be pressed the entire time, while talking. To listen to the camera location, release the Talk button. 9 SEARCH / EVENT BUTTON a) SEARCH : Pressing this button brings up the Search menu, which allows you to quickly find recordings.
10 13 REW BUTTON Press this button to begin high-speed re verse playback during the pl ayback. 14 PLAY / PAUSE BUTTON a) Initiates video Playback. b) PAUSE : Press this button to pause video in playback. 15 FF BUTTON Press this button to begin high-speed forward playback during the p layback.
11 e) HDD FULL: If the OVERWRITE menu is set up, the LED will not blink in any case. The LED blinks if the HDD has less than 1GB of storage spa ce, and remains ON when the HDD is FULL. f) POWER: This LED will be illuminated when POWER is appli ed to the unit.
12 6 DESCRIPTION OF PARTS AND FUNCTION – BACK PANEL 1 BNC Camera Inputs - Channel 1-8 cam era inputs (for camera s with BNC Video outputs) 2 6 Pin DIN Camera Inputs - Channel 1-8 Camera in puts (for camera s with 6 Pin DIN camera outputs).
13 7 MAIN MENU CONTROL MAIN KEY BUZZER LOSS BUZZER 6. SYSTEM ( Ⅰ ) QUAD LINE BLANK COLOR TITLE/TIME ALARM OUT DEFAULT SET 5.MOTION SET MOTION CHANNEL SENSITIVITY AREA 1.TIME/DATE SET DISPLAY TIME DATE DATE FORMAT 3.TITLE SET DISPLAY CH1 CH8 : : 4.ALARM SET ALARM CH1 CH8 : : 2.
14 AL ARM R E C REC QUALITY REC SPEED REC DUR A TION 9.ALARM REC SET PRE ALARM REC SCH EDU LE REC REC SETTT ING 10.SCHEDUL E REC SET HDD CLE AR ALL 8.HDD / REC SET REC QUALITY REC RESOLUTIO N REC SPEED USB REC LIM IT HDD SL AVE HDD OVERWRIT E GA TE W A Y 7.
15 Enter the MENU screen by pressing the MENU bu tton. Scroll throu gh the 12 options by pressing the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press the Enter button.
16 NOTE: Some alternative brand PIR motion se nsors have a default setting of N.C (normally closed). In order to activate the alarm on such a PIR motion sen sor, change the setting to N.C 7.5 MOTION SET This submenu allows you to enabl e / disable t he Pixel-based Motion Detection function by channel and set its Sensitivity level.
17 h) DEFAULT SET : Selecting [Y] resets all pr ogrammed settings back to the default factory settings (except for the time & date). NOTE: If you perform a DEFAULT SET, the programmed data you have entered for the DDNS will be automatically deleted.
18 a) REC QUALITY : Sets the quality level of recording. Available settings are : Basic, Normal, High and Best. NOTE: Higher quality recording consumes m ore memory on your HDD. Please refer to RECORDING TIME (IN HOURS ) on page 30. b) REC RESOL UTION c) REC SPEED : Allows you to set the Images Per Second for record ing.
19 [ONCE] - Recording will be carri ed out one time, according to the schedul e. b) N0-N7 : Total 8 REC can be set up from N0 to N7. Each Schedule REC can control Start TIME/DATE, End TIME/DATE and REC Quality as well as REC Speed can be set up in this mode.
20 d) USER PASSWORD : Put the Password that y ou have set with the DDNS server. As the maximum character available with this unit will be 8 digits, the User Name shoul d not exceeding 8 characters an d your special att ention required when you are setting with the DDNS server.
21 8 PLAYBACK SEARCH The DVR/MONITOR allows you to easil y find sections of recorded video using the Search feature. Press the SEARCH button to access the “PLAYBACK SEARCH SET” menu. (1) LAST RECORD: Plays the most recent reco rding. (2) FULL LIST: Shows a listing of all reco rded video on the HDD, so rted by time.
22 9 PLAYBACK OPTION When the PLAY button is pressed, one of the Pl ayback Search menus will appe ar. The Playback menu that appears upon pressing PLAY depends o n t he Search option that was last used. For example, if the last Search opt ion used was a Time Search, then p ressing PLAY will bring up the Playback Time Search.
23 10 PAN/TILT ZOOM The DVR/MONITOR is eq uipped with a built-in Pan/Ti lt Zoom feature, which is only available when used in conjunction with a com patible Pan/Tilt Dome camera.
24 11 REMOTE CONTROL Features of the Remote Control. For more details on spe cific remote contro l features, refer to the Monitor features KEY FUNCTION DESCRIPTION SLEEP Mode On/Off.
25 12 CAMERA (DIN Connector) INSTALLATION Connect the camera to the CAMERA IN PUT on the rear panel of the system. SG7380 PAN/TILT CAMERA (CH1 ONLY) SG7518 CAMERA ETHERNET ALARM OU T VIDEO INPUT CH3 C.
26 13 CAMERA (BNC Connection) INSTALLATION Connect the camera to the CAMERA IN PUT on the rear panel of the system. BNC CAMERA +DC 12V- VIDEO A UDIO REAR ALARM OU T VIDEO INPUT CH3 CH1 CH2 CH4 CH2 CH4.
27 14 MONITOR AND STANDARD VCR INSTALLATION Connect the camera to the CAMERA IN PUT on the rear panel of the system MONITOR VCR VIDEO INPUT VIDEO INPUT AUDIO INPUT AUDIO INPUT ALARM OU T VIDEO INPUT C.
28 15 ETHERNET (NETWORK), EXTERNAL ALARM DEVICE INSTALLATION SENSOR INTERNET ALARM OU T VIDEO INPUT CH3 CH1 CH2 CH4 CH2 CH4 CH5 CH6 CH6 5 1 + - CH7 CH8 CH8 AUDIO I NPUT 6 2 7 3 + - + - + - WARNI NG OU.
29 16 NETWORK IMAGE SIZE AND SPEED 720 X 240 360 X 240 IMAGE SIZE IPS IMAGE SIZE IPS BASIC 16K ~ 17K 10 ~ 15 10K ~ 11K 23 ~ 28 NORMAL 19K ~ 20K 09 ~14 11K ~ 12K 23 ~28 HIGH 23K ~ 24K 09 ~ 14 14K ~ 15K 15 ~ 20 BEST 32K ~ 33K 09 ~ 14 19K ~ 20K 10 ~ 15 NOTE: The demanding volume of HDD can be differ ent in depending on the displ ayed picture.
30 17 RECORDING TIME (IN HOURS) BASED ON 160 GB H.D.D. 720 X 240 BASIC NORMAL HIGH BEST 01 IPS 2858 2500 2052 1510 02 IPS 1428 1250 1026 758 03 IPS 946 834 686 504 05 IPS 572 498 412 304 10 IPS 284 25.
31 18 RECORDING TIME (IN GIGABYTES PER HOUR) 720 X 240 BASIC NORMAL HIGH BEST 01 IPS 0.056GB/H 0.064GB/H 0.078GB/H 0.106GB/H 02 IPS 0.112GB/H 0.128GB/H 0.156GB/H 0.211GB/H 03 IPS 0.169GB/H 0.192GB/H 0.233GB/H 0.317GB/H 05 IPS 0.28GB/H 0.321GB/H 0.389GB/H 0.
32 19 INSTALLING THE HDD NOTE: The HDD serves the same purpose in the DVR/Monitor as a vide o cassette does in a VCR. However, installing t he HDD is a bit more complicated. Please follow the next steps carefully in order to e nsure proper installation.
33 NOTE: The 4 Pin connection is the DC Power cable, and the wide r cable is the standard Ha rd Drive IDE type connection 4 Secure the HDD in the Casing (optional ) Use screws and tighten them, positioning the HDD int o place. This step is optional, but it is recommended.
34 8 If you need to unlock the cabinet, turn the key counter-clockwise from the position shown above. IF YOU DO NOT LOCK THE CABINE T, THE DVR/MONITORSYSTEM WILL NOT FUNCTION PROPERLY A (locked) B (u.
35 20 TECHNICAL SPECIFICATIONS DVR Recording Speed : 60 Fields / Sec. HDD Capacity : 400GB (Max.) Recording Video Quality : Basic, Normal, High, Best Recording Mode: Normal recording, Alarm (Alarm, Mo.
36 21 TROUBLESHOOTING If the system does not function properly , please check the following points. PROBLEM REMEDY Too dark or bright picture Readjust the CONTRAST or BRIGHTNESS controls Poor picture quality Clean the camera lens. Readjust the CONTRAST or BRIGHTNESS controls.
37 22 CARE AND MAINTENANCE Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperat ure environment. Extreme temperatures can shorten the life of the electronic devices.
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades F.A.Qs VISIT Strate g ic Vista International Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LOREX Technology SC21FD3044-161 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LOREX Technology SC21FD3044-161 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LOREX Technology SC21FD3044-161, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LOREX Technology SC21FD3044-161 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LOREX Technology SC21FD3044-161, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LOREX Technology SC21FD3044-161.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LOREX Technology SC21FD3044-161. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LOREX Technology SC21FD3044-161 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
