Manuel d'utilisation / d'entretien du produit E10 du fabricant Lenovo
Aller à la page of 126
ThinkP ad Edge 11” and E10 Har dwar e Maint enance Manual.
.
ThinkP ad Edge 11” and E10 Har dwar e Maint enance Manual.
Note Before using this information and the pr oduct it supports, be sur e to read the gener al information under Appendix A “Notices” on page 115 .
Contents About this manual . . . . . . . . . . . . v Chapter 1. Safety information . . . . . 1 General safety . . . . . . . . . . . . . . . . 1 Electrical safety . . . . . . . . . . . . . . . 2 Safety inspection guide . . . . . . . . . . . . 3 Handling devices that ar e sensitive t o electr ostatic discharge .
Chapter 9. Locations . . . . . . . . . 95 F ront view . . . . . . . . . . . . . . . . 95 Rear view . . . . . . . . . . . . . . . . . 96 Bottom view . . . . . . . . . . . . . . . 96 Chapter 10. P arts list . . . . . . . . . 97 Overall . . . . . . . . .
About this manual This manual contains service and r eference information for the following ThinkPad ® pr oducts: ThinkPad Edge 11" and E10 MT 0328 and 2545 Use this manual along with the advanced diagnostic tests to tr oubleshoot pr oblems.
vi ThinkPad Edge 11” and E10 Hardwar e Maintenance Manual.
Chapter 1. Safety information This chapter presents following safety information that you need t o be familiar with before you service a ThinkP ad Notebook.
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only appr oved tools and t est equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents.
– Use caution; do not become a victim yourself. – Switch off power . – Send another person t o get medical aid. Safety inspection guide The purpose of this inspection guide is t o assist you in identifying potentially unsafe conditions.
2. Mak e sur e that the ESD pr otective devices you use have been certied (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in prot ective packages until they ar e insert ed into the product. • A void contact with other people.
DANGER DANGER DANGER DANGER DANGER Chapter 1 . Safety information 5.
DANGER DANGER 6 ThinkP ad Edge 11” and E10 Hardwar e Maintenance Manual.
Chapter 1 . Safety information 7.
8 ThinkP ad Edge 11” and E10 Hardwar e Maintenance Manual.
PERIGO PERIGO PERIGO PERIGO PERIGO Chapter 1 . Safety information 9.
PERIGO PERIGO 10 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
DANGER DANGER DANGER DANGER DANGER Chapter 1 . Safety information 11.
DANGER DANGER 12 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
VORSICHT VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 . Safety information 13.
VORSICHT VORSICHT 14 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 1 . Safety information 15.
16 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 1 . Safety information 17.
18 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 1 . Safety information 19.
20 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 1 . Safety information 21.
22 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 2. Important service information This chapter pr esents following important service information that applies t o all machine types supported by this manual: • “Str ategy for r eplacing FRU.
Attention: The setup congur ation on the computer you ar e servicing may have been customized. Running Automatic Congur ation may alter the settings. Not e the curr ent conguration settings (using the View Conguration option); then, when service has been completed, verify that those settings remain in effect.
• The HMM will have the 4-digit MT and 3-digit CT O model only (Example: 1829-CT O). Again, CMVs are custom models and are not found in the HMM. General Announce V ariant (GA V) This is a standard model (x ed conguration). GA Vs ar e announced and offer ed to all customers.
26 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 3. General checkout This chapter pr esents following information: • “What to do rst” on page 27 • “Checkout guide” on page 28 – “Diagnostics using PC-Doctor for DOS” on pa.
Note for warranty: During the warr anty period, the customer may be responsible for r epair costs if the computer damage was caused by misuse, accident, modication, unsuitable physical or operating environment, or impr oper maintenance by the cust omer .
Note: If a supervisor passwor d has been set by the customer , BIOS Setup Utility menu appears aft er the password is ent ered. Y ou can start the utility by pr essing Enter instead of entering the supervisor password; however , you cannot change the par ameters that are pr otected by the supervisor password.
Note: PC-Doctor menu does not mean the formal support device list. Some unsupported device names may appear in the PC-Doctor menu. Diagnostics Run Normal T est Run Quick T est CPU/Coprocessor Systembo.
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info • System Conguration • Memory Contents • Physical Disk Drives • Logical Disk.
FRU tests The following table shows the test for each FRU. T able 1. FRU tests FRU Applicable t est System boar d 1. Diagnostics ➙ CPU/Coprocessor 2. Diagnostics ➙ Systemboar d P ower Diagnostics ➙ ThinkP ad Devices ➙ AC Adapter ➙ Battery 1 (Battery2) L CD unit 1.
P ower syst em check out T o verify a sympt om, do the following: 1. T urn off the comput er . 2. Remove the battery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the computer . 5. T urn off the comput er . 6. Disconnect the ac adapter and install the char ged battery pack.
P erform oper ational char ging. If the battery status indicat or or icon does not turn on, remove the batt ery pack and let it r eturn to room temper ature. Reinstall the battery pack. If the char ge indicator or icon still does not turn on, r eplace the batt ery pack.
5. Measur e the voltage of the backup battery . See the following gure. Wire V oltage (V dc) Red +2.5 to +3.2 Black Ground Red(+) Black(-) • If the voltage is correct, r eplace the syst em boar d. • If the voltage is not correct, r eplace the backup battery .
36 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 4. Related service information This chapter pr esents following information: • “Restoring the factory cont ents by using Recovery Disc Set” on page 37 • “P asswords” on page 38 •.
4. Select your language and click Next . 5. Read the license. If you agr ee with the t erms and conditions, select I accept these terms and conditions and then click Ne xt . If you do not agree with the t erms and conditions, follow the instructions on the scr een.
service technicians provide any services to r eset either the user or the master HDP , or t o r ecover data fr om the har d disk drive. The hard disk drive can be r eplaced for a scheduled fee. F or how to remove the POP , see “How t o r emove the har d-disk passwor d” on page 39.
2. When the ThinkP ad logo comes up, immediately pr ess F1 t o ent er BIOS Setup Utility . F or models supporting the P assphrase function, pr ess F1 while HDP icon is appearing on the scr een; then enter the master HDP . F or the other models, ent er the master HDP .
• P ress the Fn key . • Open the L CD cover . • T urn on the power switch. Also, in either of the following events, the computer automatically r eturns fr om sleep (standby) mode and resumes oper ation: • The ring indicat or (RI) is signaled by a serial device or a PC Car d device.
Note: Do the FRU r eplacement or other actions in the sequence shown in the column headed “FRU or action, in sequence. ” If replacing a FRU does not solve the pr oblem, put the original part back in the computer . Do not r eplace a nondefective FRU .
T able 2. Numeric error codes (continued) Symptom or error (beeps, if any) FRU or action, in sequence 0251 System CMOS checksum bad—Default congur ation used. (two short beeps) 1. Char ge the backup battery for more than 8 hours by connecting the ac adapter .
Error messages T able 3. Error messages Symptom or error (beeps, if any) FRU or action, in sequence Bad CRC2. Enter BIOS Setup Utility, and load Setup defaults. (two short beeps) Press F1 to enter BIOS Setup Utility . Press F9, and Enter to load the default setting.
• This policy applies to all ThinkP ad Not ebooks pur chased on 1 January, 2008 or later . • Lenovo will not provide replacement if the L CD is within specication as we cannot guar antee that any replacement L CD will have z ero pix el defects.
i. PC Car ds 4. T urn on the comput er . 5. Det ermine whether the pr oblem has been solved. 6. If the pr oblem does not recur , reconnect the removed devices one at a time until you nd the failing FRU . 7. If the problem r emains, replace the following FRUs one at a time (do not replace a nondefective FRU): a.
Chapter 5. Status indicators This chapter presents the system status indicators that show the status of the comput er . 1 2 3 T able 6. Status indicators Indicator Meaning 1 Sleep (standby) status 2 S.
T able 6. Status indicat ors (continued) Indicator Meaning 3 P ower status Green: The AC adapt er is connect ed. If a battery is installed on the computer , it is charged when this indicator is on. Off: The AC adapt er is not connected. On-screen indicators: F ollowing indicators ar e displayed on the scr een.
Chapter 6. Fn key combinations The following table shows the function of each combination of Fn with a function key . T able 7. Fn key combinations Key combination Description Fn+F1 T urn the audio volume down. Fn+F2 T urn the audio volume up. Fn+F3 Mute the microphone Fn+F4 Put the comput er in sleep (standby) mode.
T able 7. Fn key combinations (continued) Key combination Description F or Windows 7: Switch between the computer display and an e xternal monitor . Windows will show these display options: • Comput.
T able 7. Fn key combinations (continued) Key combination Description Fn+Home The computer display becomes bright er . The purpose of this method is to change the brightness level temporarily . T o change the default brightness level, change the settings of the P ower Option in the Control P anel or use the P ower Manager .
52 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 7. FRU replacement notices This chapt er pr esents notices relat ed t o r emoving and replacing parts. Read this chapt er car efully befor e replacing any FRU .
• T orque driver If you have a t orque driver , refer to the “T orque” column for each st ep. • Make sur e that you use the corr ect screw . If you have a t orque scr ewdriver , tighten all screws rmly to the tor que shown in the table. Never use a screw that you removed.
MTM on rear label: TTTT -C T O S/N SSSSSSS Pr oduct ID on r ear label: TTTT -MMM (Use this number when setting Serial Number) In the example, the Serial Number to be input is '1S TTTTMMMSSSSSSS'.
56 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 8. Removing and replacing a FRU This chapter pr esents dir ections and drawings for use in r emoving and replacing a FRU . Be sure t o observe the following gener al rules: 1. Do not try to service any comput er unless you have been tr ained and certied.
Before servicing ThinkP ad Edge 11” Some models of the ThinkP ad Edge 11” you ar e servicing might have the SIM card that the customer has installed.
1010 Battery pack Important notice for replacing a battery pack: ThinkV antage T oolbox have an aut omatic battery diagnostic that determines if the batt ery pack is defective. A battery pack FRU should not be r eplaced unless this diagnostic shows that the battery is defective.
1020 Bottom door F or access, r emove this FRU: • “1010 Battery pack” on page 59 T able 9. Removal steps of bottom door Note: Loosen the screws 1 , but do not remove them.
Note: Applying labels t o the bott om door The new bottom door FRU is shipped with a kit containing label. When you r eplace the bott om door , you need t o apply the following labels: 1 Serial number.
1030 Hard disk drive (HDD) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive t o physical shock.
T able 10. Removal steps of HDD (continued) When installing: Make sure that the HDD connector is attached rmly . Chapter 8 . Removing and r eplacing a FRU 63.
1040 DIMM F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 T able 11. Removal steps of DIMM 1 1 2 a b Note: If the computer you are servicing has two DIMM slots and only one DIMM is used, the card must be installed in SL O T -0 ( a ), but not in SL OT -1 ( b ).
1050 PCI Express Mini C ard for wireless LAN F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 T able 12.
T able 12. Removal steps of PCI Express Mini C ard for wireless LAN (continued) 3 When installing: Plug the gr ay cable into the jack marked MAIN or M , and the black cable int o the jack marked A UX or A on the car d.
1060 PCI Express Mini C ard for wireless W AN F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 T able 13.
1070 K eyboard F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on page 62 T able 14. Removal steps of keyboard 1 1 Step Screw (quantity) Color T or que 1 M2 × 2.
T able 14. Removal steps of keyboard (continued) 3 5 6 7 7 8 4 Chapter 8 . Removing and r eplacing a FRU 69.
T able 15. Installation steps of keyboard When installing the keyboard, do as follows: 1. A ttach the keyboar d connect ors. 2. A ttach the keyboar d so that the front edge of the keyboard are under the fr ame as shown in this gure. 3. Secur e the keyboard by tightening the scr ews from the bottom side of the comput er .
1080 P alm rest assembly, power -on board assembly (with cable), and microphone F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on page 62 • “1070 Keyboar d” on page 68 T able 16.
T able 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) 1 2 3 4 5 6 6 6 Step Screw (quantity) Color T or que 6 M2 × 7 mm, wafer-head, nylon-coat ed (3) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connectors are attached rmly .
T able 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) 7 7 7 8 1 1 2 Step Screw (quantity) Color T or que 1 M2 × 2 mm, big-head, nylon-coat ed (2) Black 0.
T able 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) 1 2 When installing: Make sure that all the pr ojections of the palm r est assembly are attached rmly to the guide holes of the base cover .
1090 Bluetooth daughter card (BDC-2) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on pag.
1100 I/O board F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on page 62 • “1070 Keyboar d” on page 68 • “1080 Palm r est assembly, power-on boar d assembly (with cable), and microphone” on page 71 T able 18.
1110 Speak er assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on page 62 • “1070 Keyboar d” on page 68 • “1080 Palm r est assembly, power-on boar d assembly (with cable), and microphone” on page 71 T able 19.
Note: Dropping a system boar d fr om a height of as little as 6 inches so that it falls at on a har d bench can subject the acceler ometer t o as much as 6,000 G's of shock. • Be car eful not t o drop the syst em boar d on a bench top that has a har d surface, such as metal, wood, or composite.
T able 20. L ocation of major sensitive components on the system board (continued) F or AMD models: a Acceleromet er chip for the HDD Active Pr otection Syst em™ b North Bridge c CPU d South Bridge c b a d Chapter 8 .
T able 21. Removal steps of system board, fan assembly, and backup battery 1 2 3 4 4 6 6 5 5 Step Screw (quantity) Color T or que 6 M2 × 4 mm, wafer -head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connectors are attached rmly .
T able 21. Removal steps of system board, fan assembly, and backup batt ery (continued) 7 8 When installing: Make sure that the connect or is attached rmly . DANGER Use only the battery specied in the parts list for your computer . Any other battery could ignite or e xplode.
T able 21. Removal steps of system board, fan assembly, and backup batt ery (continued) When installing: Make sure that the connectors are attached rmly . When installing: Before you attach the fan assembly t o the syst em boar d, you need to peel the thin lm off fr om the thermal rubbers as shown in this gure.
1130 L CD unit F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on page 62 • “1070 Keybo.
T able 23. Removal steps of L CD unit When installing: • Make sure that you r oute the cables rmly as shown in this gur e. • When you r oute the cables, make sur e that they ar e not subject ed to any tension. T ension could cause the cables to be damaged by the cable guides, or a wire to be br oken.
1140 CRT board assembly (with cable) F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on pag.
T able 25. Removal steps of DC-in cable and base cover assembly 1 2 3 Note: Applying labels to the base cover Note: If the Windows Authentication label (CO A) 3 is attached to a part that is replaced,.
1 5 4 3 2 Chapter 8 . Removing and r eplacing a FRU 87.
2010 L CD be zel assembly F or access, remove the following FRU: • “1010 Battery pack” on page 59 T able 26. Removal steps of L CD bezel assembly 1 1 Step Screw cap Screw (quantity) Color T or que 1 M2 × 4 mm, wafer-head, nylon-coated (2) Silver 0.
2020 Int egrated camera F or access, remove these FRUs, in or der: • “1010 Battery pack” on page 59 • “2010 L CD bez el assembly” on page 88 T able 27. Removal steps of integrated camera 1 2 1 When installing: Make sure that the connect or is attached rmly .
2030 L CD panel, hinges, and L CD cable F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD)” on .
T able 28. Removal steps of L CD panel, hinges, and L CD cable (continued) 3 3 3 3 Step Screw (quantity) Color T or que 3 M2 × 4 mm, wafer -head, nylon-coated (4) Silver 0.211 Nm (2.15 kgfcm) When installing: When attaching the L CD panel to the cover , press the left and right edges cover ed with metal gently with your ngers.
T able 28. Removal steps of L CD panel, hinges, and L CD cable (continued) 6 7 8 92 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
2040 Antenna kit and L CD rear cover assembly F or access, remove these FRUs in or der: • “1010 Battery pack” on page 59 • “1020 Bottom door” on page 60 • “1030 Har d disk drive (HDD).
94 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
Chapter 9. Locations This chapt er pr esents the location of ThinkP ad Edge 11” featur es and hardwar e. F ront view 1 Integr ated camer a (for some models) 2 P ower switch 3 Universal serial bus (U.
Rear view 1 Combo audio jack 2 RJ-45 (E thernet) connect or 3 Universal serial bus (USB) connectors 4 Security keyhole 5 External monitor connector 6 AC power connector 7 5 4 3 2 1 6 Bottom view 1 Bat.
Chapter 10. P arts list This chapter contains following lists of the service parts. • “Overall” on page 98 • “L CD FRUs” on page 104 • “Keyboar d” on page 107 • “ AC adapters” .
Overall 98 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
T able 30. P arts list—Overall No. FRU (Over all) FRU no. CRU ID 1 L CD unit (see “L CD FRUs” on page 104.) 2 P ower-on boar d assembly (with cable) 04W0276 N 3 P alm rest assembly 04W0287 N 4 S.
T able 30. Parts list—Overall (continued) No. FRU (Over all) FRU no. CRU ID 5 SA T A hard disk drive, 250 GB, 5,400 rpm • 0328-CT O , 26x, 27x, 2Ex, 2Fx, 2Kx, 2Qx, 32x, 33x, 35x, 3Hx, 48x, 4Ax, 4C.
T able 30. Parts list—Overall (continued) No. FRU (Over all) FRU no. CRU ID 9 Battery pack, Li-ion (6 cell) • 0328-CT O , 23x, 24x, 25x, 26x, 27x, 28x, 29x, 2Ax, 2Bx, 2Cx, 2Dx, 2Ex, 2Fx, 2Gx, 2Hx,.
T able 30. Parts list—Overall (continued) No. FRU (Over all) FRU no. CRU ID 16 Bluet ooth daught er car d (BDC-2.1) • 0328-CT O , 22x, 23x, 24x, 27x, 28x, 2Bx, 2Cx, 2Dx, 2Ex, 2Fx, 2Gx, 2Hx, 2Jx, 2.
T able 30. Parts list—Overall (continued) No. FRU (Over all) FRU no. CRU ID 18 Memory, 2GB DDR3-1333 SDRAM SO-DIMM (PC3-10600) • 0328-CT O , 22x, 25x, 26x, 27x, 28x, 29x, 2Ax, 2Bx, 2Dx, 2Ex, 2Gx, .
L CD FRUs 1 4 2 5 8 6 7 3 104 ThinkP ad Edge 11” and E10 Har dware Maintenance Manual.
T able 31. P arts list—L CD FRUs No. FRU (L CD FRUs) FRU no. CRU ID 1 L CD bez el assembly 04W0281 N 2 Hinges (black) • 0328-CT O , 22x, 24x, 35x, 38x, 3Bx, 3Ex, 3Gx, 3Jx, 3Kx, 3Mx, 3Px, 48x, 4Ax,.
T able 31. Parts list—L CD FRUs (continued) No. FRU (L CD FRUs) FRU no. CRU ID 5 L CD rear cover assembly (midnight black, smooth) • 0328-CT O , 23x, 24x, 25x, 26x, 27x, 28x, 29x, 2Ax, 2Bx, 2Cx, 2.
K eyboard T able 32. P arts list—K eyboard Language FRU no. CRU ID Arabic 60Y9891 60Y9961 Belgian 60Y9892 60Y9962 Brazilian P ortuguese 60Y9890 60Y9960 Bulgarian 60Y9893 60Y9963 Canadian F rench (05.
AC adapters T able 33. Parts list—2-pin ac adapters FRU FRU no. CRU ID 2-pin (65 W , 20 V) adapter (models C T O, xxE, xxF , xxJ, xxL, xxP , xxS, xxU, xxY) 42T5282 2-pin (65 W , 20 V) adapter (model.
P ower cords A ThinkP ad power cord for a specic country or region is usually available only in that country or region: T able 36. Parts list—2-pin power cords Country or region FRU no. CRU ID Argentina • models -C TO , xxY 42T5020 42T5105 Brazil • models -C TO , xxP 42T5180 42T5183 Canada, U .
Recovery discs Windows 7 Home Basic (32 bit) DVDs Windows 7 Home Basic (32 bit) is pr einstalled as the operating system in the following models: • 0328-C TO , 2Yx, 2Zx, 32x, 33x, 34x, 35x, 36x, 37x, 38x, 39x, 3Ax, 43x, 44x, 45x, 4Cx, 4Gx, 4Hx, 4Jx • 2545-C TO , 2Ex, 2Lx, 2Mx, 2Nx, 2Px, 2Qx, 2Rx, 38x, 39x, 3Ax T able 38.
Windows 7 Home P remium (64 bit) DVDs Windows 7 Home Pr emium (64 bit) is preinstalled as the oper ating system in the following models: • 0328-C TO , 22x, 24x, 25x, 2Ax, 2Bx, 2Cx, 2Dx, 2Ex, 2Fx, 2Gx, 2Hx, 2Jx, 2Lx, 2Mx, 2Px, 2Qx, 3Bx, 3Cx, 3Dx, 3Ex, 3Fx, 3Kx, 3Lx, 4Kx • 2545-C TO , 24x, 26x, 28x, 2Xx, 3Bx T able 40.
Windows 7 P rofessional (64 bit) DVDs Windows 7 Pr ofessional (64 bit) is pr einstalled as the oper ating system in the following models: • 0328-C TO , 23x, 26x, 27x, 28x, 29x, 2Kx, 2Nx, 2Sx, 2Vx, 3Gx, 3Mx, 3Nx, 3Px, 3Qx, 3Rx, 47x, 48x, 4Fx, 4Lx, 4Mx • 2545-C TO , 23x, 25x, 27x, 2Bx, 2Sx, 2Tx, 2Ux, 32x T able 41.
Windows 7 Starter (32 bit) DVDs Windows 7 S tarter (32 bit) is preinstalled as the oper ating syst em in the following models: • 0328-C TO , 3Sx, 3Tx, 42x • 2545-C TO , 2Cx, 2Dx, 2Fx, 2Gx, 33x, 34x, 36x T able 42.
Common service tools T able 43. Parts list—Common service tools T ool P/N Screwdriver kit 95F3598 1/4" drive spinner handle 1650840 1/4" Sq. t o 1/4" he x t orx adapt er 93F2838 TR7- TR-10 tamper resistant t orx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.
Appendix A. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the pr oducts and services curr ently available in your area.
Electronic emission notices F or electr onic emission information on Class B digital devices, r efer to the corr esponding information in the User Guide .
.
Part Number: 75Y6925_01 Printed in China (1P) P/N: 75Y6925_01 *75Y6925_01*.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenovo E10 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenovo E10 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenovo E10, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenovo E10 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenovo E10, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenovo E10.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenovo E10. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenovo E10 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
