Manuel d'utilisation / d'entretien du produit 5041 du fabricant Lenovo
Aller à la page of 78
ThinkCentr e User Guide Machine T ypes: 4162, 5041, 5044, 5051, 5053, 5055, 5057, 5059, 5061, 5063, and 5065.
.
ThinkCentr e User Guide Machine T ypes: 4162, 5041, 5044, 5051, 5053, 5055, 5057, 5059, 5061, 5063, and 5065.
Note: Before using this information and the pr oduct it supports, be sur e to read and understand the ThinkCentre Safety and Warranty Guide and Appendix A “Notices” on page 63.
Contents Important safety information . . . . . . v Chapter 1. Product overview . . . . . . 1 F eatures . . . . . . . . . . . . . . . . . . 1 Specications . . . . . . . . . . . . . . . . 3 Software overview . . . . . . . . . . . . . . 4 Software pr ovided with your Windows operating system .
Chapter 7. Getting information, help, and service . . . . . . . . . . . . . . 59 Information r esources . . . . . . . . . . . . 59 Online Books folder . . . . . . . . . . . 59 Lenovo ThinkV antage T ools . . . . . . . . 59 ThinkV antage P roductivity Center .
Important safety information CA UTION: Before using this manual, be sur e to read and understand all the r elated safety information for this product. Refer to the ThinkCentre Safety and W arranty Guide that you received with this product for the latest safety information.
vi ThinkCentre User Guide.
Chapter 1. P roduct overview This chapter pr ovides information about the comput er features, specications, softwar e pr ograms pr ovided by L enovo, and locations of connectors, components, parts on the system boar d, and int ernal drives.
• Audio line-in connector , audio line-out connector , and micr ophone connector on the r ear panel • Internal speaker (available in some models) Connectivity 10/100/1000 Mbps integr ated Ethernet.
• 280-watt auto-sensing power supply • 320-watt auto-sensing power supply Security features • A power-on passwor d and an administr ator passwor d to deter unauthorized use of your computer • .
Dimensions Width: 160 mm (6.3 inches) Height: 388 mm (15.28 inches) Depth: 422 mm (16.61 inches) Weight Maximum congur ation as shipped: 9.4 kg (20.
Lenovo ThinkV antage T ools The Lenovo ThinkV antage ® T ools pr ogram guides you to a host of information sour ces and provides easy access t o various tools to help you work mor e easily and securely . F or mor e information, see “L enovo ThinkV antage T ools” on page 59 .
3. When the installation pr ocess completes, the P assword V ault icon is activated. P ower Manager The P ower Manager pr ogram provides convenient, exible, and complet e power management for your ThinkCentre ® computer .
Figure 1. F ront connector , control, and indicator locations 1 Har d disk drive activity indicat or 5 USB connector 2 P ower indicator 6 Headphone connect or 3 P ower switch 7 Microphone connector 4 .
Figure 2. Rear connector and part locations 1 P ower cor d connect or 9 Audio line-in connector 2 Voltage-selection switch (available on some models) 10 PCI Expr ess x16 gr aphics card slot 3 PS/2 key.
Connector Description Serial port Used to attach an e xternal modem, a serial printer , or other devices that use a 9-pin serial port. USB connect or Used to attach a device that uses a USB connector , such as a USB keyboar d, a USB mouse, a USB scanner , or a USB print er .
Figure 4. Syst em board part locations 1 Micropr ocessor 11 Cover pr esence switch connector (also called intrusion switch connector) 2 Micr oprocessor fan connector 12 F ront USB connector 3 Memory s.
Figure 5. Drive bay locations 1 Bay 1 - Optical drive bay (with an optical drive installed) 2 Bay 2 - Slim car d reader drive bay 3 Bay 3 - Primary SA T A hard disk drive bay (with a 3.5-inch SA T A har d disk drive installed) 4 Bay 4 - Secondary SA T A har d disk drive bay Chapter 1 .
12 ThinkCentre User Guide.
Chapter 2. Installing or r eplacing har dware This chapter provides instructions on how to install or r eplace har dware for your computer . This chapt er contains the following t opics: • “Handli.
identify the r equired connect or . Then, use the instructions that come with the option t o help you make the connection and install softwar e or device drivers that are requir ed for the option.
Removing and reinstalling the front bezel Attention: Do not open your computer or attempt any r epair befor e reading and understanding the “Important safety information” in the ThinkCentre Safety and W arranty Guide that came with your computer .
Figure 8. Reinstalling the front bezel 5. Go to “Completing the parts replacement” on page 37. Installing or replacing a PCI card Attention: Do not open your computer or attempt any r epair befor e reading and understanding the “Important safety information” in the ThinkCentre Safety and W arranty Guide that came with your computer .
Figure 9. Removing the screw that secures the PCI card latch 4. Do one of the following: • If you ar e r eplacing a PCI car d, open the PCI card latch and r emove the old PCI car d that is curr ently installed as shown in Figure 10 “Removing the PCI car d” on page 18.
Figure 10. Removing the PCI card • If you ar e installing a PCI card, open the PCI card latch and r emove the appropriat e PCI car d slot cover . See “Locating parts on the system boar d” on page 9 to identify the types of PCI car d slots. 5. Remove the new PCI car d fr om its static-pr otective package.
7. Reinstall the scr ew t o secur e the PCI card latch in place. What to do ne xt: • T o work with another piece of hardwar e, go t o the appr opriate section. • T o complet e the installation or replacement, go t o “Completing the parts replacement” on page 37.
Figure 13. Opening the retaining clips of the memory slot 7. P osition the new memory module over the memory slot. Make sur e that the notch 1 on the new memory module is aligned with the key 2 in the memory slot.
The battery normally r equires no charging or maintenance throughout its life; however , no battery lasts forever . If the batt ery fails, the date, time, and congur ation information, including passwords, ar e lost. An error message is displayed when you turn on the comput er .
Replacing the power supply assembly Attention: Do not open your computer or attempt any r epair befor e reading and understanding the “Important safety information” in the ThinkCentre Safety and W arranty Guide that came with your computer . T o obtain a copy of the ThinkCentre Safety and W arranty Guide , go to: http://www.
Figure 17. Removing the power supply assembly screws 5. Pivot the power supply assembly as shown and then lift the power supply assembly to remove it from the chassis. Figure 18. Removing the power supply assembly 6. Make sur e that the new power supply assembly is the correct replacement.
7. Install the new power supply assembly int o the chassis so that the screw holes in the new power supply assembly are aligned with the corr esponding holes in the r ear of the chassis. 8. Install the four scr ews t o secure the new power supply assembly in place.
Figure 19. Removing the heat sink and fan assembly 8. Lift the failing heat sink and fan assembly off the system board. Notes: a. Y ou might have t o gently twist the heat sink and fan assembly to fr ee it fr om the micr oprocessor . b. When handling the heat sink and fan assembly, do not t ouch the thermal gr ease on the bottom of it.
10. Connect the new heat sink and fan assembly cable to the micr oprocessor fan connect or on the system board. See “Locating parts on the system board” on page 9. 11. Reconnect any cables that have been removed. What to do ne xt: • T o work with another piece of hardwar e, go t o the appr opriate section.
Figure 21. Accessing the microprocessor 5. Lift the micropr ocessor str aight up and out of the micropr ocessor socket, as shown in Figure 22 “Removing the micropr ocessor ” on page 28. Notes: a. Y our micr oprocessor and sock et might look different fr om the one illustr ated.
Figure 22. Removing the microprocessor 6. Make sure that the small handle is in the r aised position. 7. Remove the pr otective cover that pr otects the gold contacts of the new micropr ocessor .
Figure 23. Removing the optical drive 6. Slide the new optical drive into the drive bay fr om the front and align the screw holes in the new optical drive with the corresponding holes in the drive bay . Then, install the three scr ews to secure the new optical drive in place.
7. Connect one end of the signal cable to the rear of the new optical drive and the other end to an available SA T A connector on the system boar d. See “L ocating parts on the system boar d” on page 9. Then, locate an available ve-wire power connector and connect it t o the r ear of the new optical drive.
Figure 26. Removing the hard disk drive 6. Slide the new hard disk drive into the har d disk drive bay and align the screw holes in the new har d disk drive with the corr esponding holes in the drive bay . Then, install the four scr ews t o secur e the new har d disk drive in place.
7. Connect one end of the signal cable t o the r ear of the new hard disk drive and the other end to an available SA T A connect or on the syst em board. See “Locating parts on the syst em board” on page 9. Then, locate an available ve-wir e power connector and connect it t o the rear of the new hard disk drive.
Figure 29. Removing the front audio and USB assembly 6. Route the cables of the new fr ont audio and USB assembly thr ough the hole in the chassis. 7. P osition the new front audio and USB assembly to the chassis so that the scr ew hole in the new fr ont audio and USB assembly is aligned with the corr esponding hole in the chassis.
4. Disconnect the r ear fan assembly cable fr om the system fan connector on the syst em boar d. See “Locating parts on the system board” on page 9. 5. The rear fan assembly is attached t o the chassis by four rubber mounts. Car efully r emove the four rubber mounts fr om the r ear of the chassis by br eaking them or cutting them with scissors.
Figure 31. Replacing the rear fan assembly 9. Connect the r ear fan assembly cable t o the system fan connector on the syst em board. What to do ne xt: • T o work with another piece of hardwar e, go t o the appr opriate section. • T o complete the r eplacement, go to “Completing the parts r eplacement” on page 37 .
Figure 32. K eyboard connectors What to do ne xt: • T o work with another piece of hardwar e, go t o the appr opriate section. • T o complete the r eplacement, go to “Completing the parts r eplacement” on page 37.
What to do ne xt: • T o work with another piece of hardwar e, go t o the appr opriate section. • T o complete the r eplacement, go to “Completing the parts r eplacement” on page 37.
6. Reconnect the power cor d and all other ext ernal cables to the computer . F or connect or locations, see “Locating connectors, controls, and indicat ors on the front of your computer” on page 6 and “L ocating connectors and parts on the r ear of your comput er ” on page 7.
P adlock Y our computer is equipped with a padlock loop so that the comput er cover cannot be r emoved when a padlock is installed. Figure 36. Installing a padlock P assword protection T o det er unauthorized use of your computer , you can use the Setup Utility pr ogram to set a password.
8. T urn on the comput er and leave it on for appr oximately 10 seconds. Then, turn off the computer by holding the power switch for appro ximately ve seconds. 9. Repeat step 1 thr ough step 4. 10. Move the Clear CMOS /Recovery jumper back t o the standar d position (pin 1 and pin 2).
Chapter 3. Recovery information This chapter pr ovides information about the r ecovery solutions provided by Lenovo. This chapt er contains the following t opics: • “Creating and using r ecovery m.
Note: On the Windows 7 oper ating system, you can creat e r ecovery media using discs or e xternal USB stor age devices. On the Windows Vista oper ating syst ems, you can cr eate r ecovery media using only discs, so this operation is also called “ creating P roduct Recovery discs.
P erforming a backup operation This section pr ovides instructions on how to perform a backup oper ation using the Rescue and Recovery progr am on different operating systems. • T o perform a backup operation using the Rescue and Recovery pr ogram on the Windows 7 oper ating system, do the following: 1.
• Rescue les from your hard disk drive or fr om a backup The Rescue and Recovery workspace enables you t o locate les on your har d disk drive and tr ansfer them to a network drive or other r ecordable media, such as a USB device or a disc.
1. The recovery oper ations you can perform using a r escue medium vary depending on the oper ating system. 2. The rescue disc can be start ed in all types of optical drives. Creating a rescue medium This section provides instructions on how to creat e a r escue medium on differ ent oper ating systems.
When the r escue medium starts, the Rescue and Recovery workspace opens. The help information for each feature is available fr om the Rescue and Recovery workspace.
Chapter 4. Using the Setup Utility pr ogram Y ou can use the Setup Utility progr am to view and change the congur ation settings of your computer , regar dless of which oper ating system you are using. However , the oper ating system settings might override any similar settings in the Setup Utility progr am.
P assword considerations A password can be any combination of up t o 16 (1 to 16) alphabetic and numeric char acters. F or security reasons, it is r ecommended to use a str ong password that cannot be easily compr omised. T o set a str ong password, use the following guidelines: Note: The Setup Utility pr ogram passwor ds ar e not case sensitive.
SA T A Controller When this option is set t o Disabled , all devices connect ed to the SA T A connect ors (such as the har d disk drive and the optical drive) are disabled and will not be displayed in the syst em congur ation. USB Setup Use this option to set up USB connect ors.
2. Select Startup ➙ Primary Boot Sequence . Read the information displayed on the right side of the screen. 3. Select the rst boot device, second boot device, and so on. 4. Pr ess Esc t o return t o the Startup menu. Then, select the devices for the Aut omatic Boot Sequence and Error Boot Sequence .
Chapter 5. Updating syst em progr ams This chapter pr ovides information about updating the POST and BIOS, and how to r ecover fr om a POS T and BIOS update failure.
5. When prompted t o change the machine type and model, it is suggest ed that you do not make this change by pr essing N. However , if you do want to change the machine type and model, pr ess Y , then type in the machine type and model and pr ess Ent er .
12. Reinstall any parts and r econnect any cables that have been r emoved or disconnect ed. 13. Reinstall the computer cover and r econnect power cords and all other external cables. See “Completing the parts r eplacement” on page 37. 14. T urn on the comput er and r emove the disc fr om the optical drive.
54 ThinkCentre User Guide.
Chapter 6. T roubleshooting and diagnostic programs This chapt er pr ovides information about some basic tr oubleshooting and diagnostic progr ams. If your computer problem is not described in this chapt er , see Chapter 7 “Getting information, help, and service” on page 59 for additional tr oubleshooting r esources.
Symptom Action The mouse does not work. V erify that: • The computer is turned on. • The mouse is correctly connected to an appr opriate mouse connector (the PS/2 mouse connector or one of the USB connectors) on the computer . • The mouse is clean.
Creating a diagnostic disc This section provides instructions on how to cr eate a diagnostic disc. T o creat e a diagnostic disc, do the following: 1. Download a self-starting bootable disc image (known as an ISO image) of the diagnostic pr ogram from: http://www.
1 Retainer ring 2 Ball 3 Plastic r ollers 4 Ball cage The non-optical mouse uses a ball to navigate the pointer . If the point er on the scr een does not move smoothly with the mouse, you might need t o clean the mouse. T o clean the non-optical mouse, do the following: 1.
Chapter 7. Getting information, help, and service This chapt er provides information about help, service, and t echnical assistance for L enovo products.
ThinkV antage P roductivity Center The ThinkV antage P roductivity Center progr am contains information sour ces and tools designed t o make computing easy and secur e.
• Purchase additional services, such as support for har dware, oper ating systems, software progr ams, network setup and congur ation, and custom installations. • Purchase upgr ades and e xtended hardwar e r epair services. • Download the latest device drivers and softwar e updates for your computer model.
• Installation and maintenance of application progr ams Refer t o the safety and warr anty information that is pr ovided with your computer for a complet e explanation of warr anty terms. Y ou must r etain your pr oof of purchase to obtain warr anty service.
Appendix A. Notices Lenovo may not offer the pr oducts, services, or featur es discussed in this document in all countries. Consult your local Lenovo r epresentative for information on the products and services currently available in your area.
T elevision output notice The following notice applies t o models that have the factory-installed t elevision-output feature. This pr oduct incorporat es copyright pr otection technology that is pr otected by method claims of certain U .S. patents and other intellectual pr operty rights owned by Macrovision Corpor ation and other rights owners.
Inde x A a rescue medium, cr eating and using 44 Access Help 60 administrat or password 48 antivirus softwar e 6 audio line-in connector 8 audio line-out connector 8 audio subsystem 1 B backup and rec.
internal drives 10 internal drives 1 K keyboard replacing 35 L Lenovo Customer Support Center 61 Lenovo ThinkV antage T oolbo x 56 Lenovo ThinkV antage T ools 59 Lenovo Web site 60 Lenovo Welcome 5 lo.
serial port 9 service and help 61 getting 59 Lenovo Customer Support Cent er 61 services other 62 purchasing additional 62 Set Administr ator Password 48 Set P ower -On P assword 48 settings changing .
68 ThinkCentre User Guide.
.
Part Number: 0A22689 Printed in USA (1P) P/N: 0A22689 *0A22689*.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenovo 5041 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenovo 5041 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenovo 5041, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenovo 5041 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenovo 5041, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenovo 5041.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenovo 5041. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenovo 5041 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
