Manuel d'utilisation / d'entretien du produit 3093AC6 du fabricant Lenovo
Aller à la page of 206
ThinkP ad X200 T ablet and X201 T ablet Har dwar e Maint enance Manual.
.
ThinkP ad X200 T ablet and X201 T ablet Har dwar e Maint enance Manual.
Note Before using this information and the pr oduct it supports, be sur e to read the gener al information under “Notices” on page 193 . F ourth Edition (F ebruary 2010) © Copyright Lenovo 2008 , 2010 .
Contents About this manual . . . . . . . . . . . . v Chapter 1. Safety information . . . . . 1 General safety . . . . . . . . . . . . . . . . 1 Electrical safety . . . . . . . . . . . . . . . 2 Safety inspection guide . . . . . . . . . . . . 3 Handling devices that ar e sensitive t o electr ostatic discharge .
1130 Bluetooth daughter car d (BDC-2.1) . . . . 83 1140 Keyboar d bez el . . . . . . . . . . . . 84 1150 I/O card assembly . . . . . . . . . . . 86 1160 USB sub card . . . . . . . . . . . . . 88 1170 L CD assembly . . . . . . . . . . . . 90 1180 DC-in connector , fan, digitizer pen case, and pen switch assembly .
About this manual This manual contains service and r eference information for the following ThinkP ad® pr oducts. ThinkPad X200 T ablet MT 4184, 7448, 7449, 7450, 7453, 2263, and 2266 ThinkPad X201 T ablet MT 0053, 0831, 2985, 3093, 3113, 3144, and 3239 Use this manual along with the advanced diagnostic tests to tr oubleshoot pr oblems.
vi ThinkPad X200 T ablet and X201 T ablet Hardwar e Maintenance Manual.
Chapter 1. Safety information This chapter presents following safety information that you need t o be familiar with befor e you service a ThinkP ad Notebook.
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only appr oved t ools and test equipment. Some hand tools have handles cover ed with a soft mat erial that does not insulat e you when working with live electrical curr ents.
– Use caution; do not become a victim yourself. – Switch off power . – Send another person to get medical aid. Safety inspection guide The purpose of this inspection guide is t o assist you in identifying potentially unsafe conditions.
Notes: 1. Use pr oduct-specic ESD pr ocedures when they ex ceed the r equirements noted her e. 2. Mak e sur e that the ESD pr otective devices you use have been certied (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in prot ective packages until they ar e inserted into the product.
Before the computer is powered on after FRU r eplacement, make sure all screws, springs, and other small parts are in place and ar e not left loose inside the computer . V erify this by shaking the computer and list ening for r attling sounds. Metallic parts or metal akes can cause electrical shorts.
DANGER Though the main batt eries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials.
Chapter 1 . Safety information 7.
PERIGO Antes de ligar o computador após a substituição da FRU , certique-se de que todos os parafusos, molas e outras peças pequenas estejam no lugar e não estejam solt os dentro do computador . V erique isso sacudindo o computador e procurando ouvir sons de peças soltas.
A bateria de lítio pode causar incêndio, explosão ou graves queimadur as. Não a recarregue, remova seu conector polarizado, desmonte-a, aqueça-a acima de 100°C (212°F), incinere-a, ou e xponha o conteúdo de sua célula à água. Descarte a bateria conforme requerido pelas leis ou r egulamentos locais.
DANGER Certaines batt eries de secours contiennent du nickel et du cadmium. Ne les démontez pas, ne les rechargez pas, ne les expose z ni au feu ni à l'eau. Ne les mettez pas en court-circuit. P our les mettre au rebut, conformez-vous à la r églementation en vigueur .
DANGER Bien que le voltage des batt eries principales soit peu élevé, le court-circuit ou la mise à la masse d'une batterie peut produire sufsamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren oder schwere V erbrennungen hervorrufen. Batterien dieses T yps dürfen nicht aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden.
Chapter 1 . Safety information 13.
14 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 1 . Safety information 15.
16 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Antes de encender el sistema despues de sustituir una FRU , compruebe que todos los tornillos, muelles y demás pie zas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían.
La batería de repuest o es una batería de litio y puede provocar incendios, explosiones o quemaduras graves. No la r ecargue, ni quite el conector polarizado, ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga el contenido de sus celdas al agua.
Chapter 1 . Safety information 19.
20 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 2. Important service information This chapter pr esents following important service information that applies t o all machine types supported by this manual: • “Str ategy for r eplacing FRU.
• Some computers have both a processor boar d and a system board. If you ar e instructed t o replace either the pr ocessor boar d or the system boar d, and replacing one of them does not corr ect the problem, reinstall that board, and then replace the other one.
• The MTM portion of the machine label is the 4-digit MT and 3-digit model, wher e model =“C T O” (Example: 1829-CT O). The PRODUC T ID portion of the machine label is the 4-digit MT and 3-digit CMV model (Example: 1829-W15). • The PEW recor d is the 4-digit MT and 3-digit model, where model =“C T O” (Example: 1829-CT O).
select SERVICE P AR TS. Under “P arts Information by Date” select S YS TEM SERVICE P ARTS. The list of service parts by description, with applicable machine type model and FRU will be displayed.
Chapter 3. General check out This chapter pr esents following information: • “What to do rst” on page 25 • “Checkout guide” on page 26 – “Diagnostics using PC-Doctor for DOS” on p.
F ollowing is a list of some common items that are not cover ed under warranty and some sympt oms that might indicat e that the syst em was subjected to stress beyond normal use.
2. When the ThinkP ad logo comes up, immediately press F1 to ent er the BIOS Setup Utility . Note: If a supervisor passwor d has been set by the customer , BIOS Setup Utility menu appears aft er the password is ent ered.
Diagnostics Interactive T ests • Run Normal T est • Run Quick T est • CPU/Coprocessor • Systemboard • Video Adapter • Fixed Disks • Diskette Drives • Other Devices • ThinkPad Devices.
Lenovo ThinkV antage T oolbo x (L enovo System T oolbo x) Lenovo ThinkV antage® T oolbox (L enovo System T oolbo x in Windows Vista® and Windows® XP) is a diagnostic progr am that works through the Windows oper ating system.
T able 1. FRU tests FRU Applicable t est System boar d 1. Diagnostics > CPU/Coprocessor 2. Diagnostics > Systemboard 3. If the ThinkP ad X200 UltraBase™ is attached to the ThinkP ad comput er , detach it. Place the computer on a horizontal surface, and run Diagnostics > ThinkPad Devices > HDD Active Pr otection T est .
P ower system check out T o verify a sympt om, do the following: 1. T urn off the comput er . 2. Remove the battery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the computer . 5. T urn off the comput er . 6. Disconnect the ac adapter and install the char ged battery pack.
P erform oper ational char ging. If the battery status indicator or icon does not turn on, r emove the battery pack and let it r eturn to room temper ature. Reinstall the battery pack. If the char ge indicator or icon still does not turn on, r eplace the batt ery pack.
Wire V oltage (V dc) Red +2.5 t o +3.2 Black Ground • If the voltage is correct, r eplace the system boar d. • If the voltage is not corr ect, replace the backup batt ery . • If the backup batt ery dischar ges quickly after r eplacement, r eplace the system boar d.
34 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 4. Related service information This chapter pr esents following information: • “Restoring the factory cont ents by using Pr oduct Recovery discs” on page 35 • “Restoring the fact ory.
Restoring the factory contents by using Recovery Disc Set When the har d disk drive (HDD) or solid state drive (SSD) is replaced because of a failure, no product r ecovery progr am is on the new drive. In this case, you must use the Recovery Disc Set for the computer .
Note: The r est of the r ecovery pr ocess is fully automated and no action is r equired by you. The computer will restart int o the Micr osoft Windows desktop several times and you might experience periods when no activity is apparent on the scr een for several minutes at a time.
How t o remove the power -on password T o remove a POP that you have forgotten, do the following: (A) If no SVP has been set: 1. T urn off the comput er . 2. Remove the battery pack. F or how t o remove the batt ery pack, see “1020 Battery pack” on page 63.
7. T ype the current mast er HDP in the Ent er Current P assword eld. then leave the Enter New P assword eld blank, and pr ess Ent er twice. 8. P ress F10. 9. Select Y es in the Setup Congur ation window . Both user HDP and mast er HDP will have been r emoved.
• The ring indicator (RI) is signaled by a serial device or a PC C ard device. ( does not support the ring indicator (RI) resume by PC Car d device.) • The time set on the r esume timer elapses. Note: The computer does not accept any input immediately aft er it ent ers sleep (standby) mode.
A numeric error is displayed for each err or det ected in POS T or system operation. In the displays, n can be any number . If no numeric code is displayed, check the narr ative descriptions of sympt oms. If the sympt om is not described ther e, go to “Int ermittent pr oblems” on page 48.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0193 RF antenna has been removed Enter the supervisor passwor d. 0194 The computer has been carried through a security gate Enter the supervisor passwor d. 0195 Security har dware tamper detected 1.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0220 Monitor type error—Monit or type does not match the one specied in CMOS. Load Setup Defaults in BIOS Setup Utility . 0230 Shadow RAM error—Shadow RAM fails at offset nnnn.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 02F7 F ail-safe timer NMI failed 1. DIMM. 2. System board. 1801 Attached docking station is not supported Shut down the computer and remove it from the docking station.
T able 2. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1830 Invalid memory conguration—P ower off and install a memory module to Slot-0 or the lower slot. Install DIMM in Slot-0, but not in Slot-1. Note: F or the construction of the DIMM slot, see “1040 DIMM” on page 67 .
T able 3. Error messages (continued) Symptom or error FRU or action, in sequence F ailing bits: nnnn. 1. DIMM . 2. System board. Invalid system conguration data. 1. DIMM . 2. System board. I/O device IRQ conict. 1. Load “Setup Defaults” in the BIOS Setup Utility .
T able 4. Beep symptoms (continued) Symptom or error FRU or action, in sequence T wo short beeps and a blank screen. 1. System board . 2. DIMM. T wo or mor e beeps, or a continuous beep. Oper ating system starts successfully . If a mini-PCI Ethernet car d is installed, conrm that Alert On LAN 2 in BIOS Setup Utility is disabled .
• Lenovo will not provide replacement if the L CD is within specication as we cannot guar antee that any replacement L CD will have z ero pix el defects. • One pixel consists of R, G, B sub-pixels. T able 6. L CD-related symptoms Symptom or error FRU or action, in sequence No beep, power -on indicator on, and a blank L CD during POST .
4. T urn on the comput er . 5. Det ermine whether the pr oblem has been solved. 6. If the pr oblem does not recur , reconnect the removed devices one at a time until you nd the failing FRU . 7. If the problem r emains, replace the following FRUs one at a time (do not replace a nondefective FRU): a.
50 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 5. Status indicators This chapter presents the system status indicators that show the status of the comput er . T able 7. S tatus indicators Indicator Meaning 1 Wireless LAN status Green: The wireless LAN featur e is on, and the r adio link is r eady for use, or the data is being tr ansmitted.
T able 7. Status indicators (continued) Indicator Meaning 3 Wireless W AN status Green: The wireless W AN is on, and the radio link is r eady for use, or the data is being transmitt ed. Blinking green: Data is being tr ansmitted (for some models). 4 Num lock Green: The numeric keypad on the k eyboard is enabled.
T able 7. Status indicators (continued) Indicator Meaning 10 Sleep (standby) status Green: The computer is in sleep (standby) mode. Blinking green: The computer is entering sleep (standby) mode or hibernation mode, or is resuming normal operation.
54 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 6. Fn key combinations The following table shows the function of each combination of Fn with a function key . T able 8. Fn key combinations Key combination Description Fn+F1 Reserved.
T able 8. Fn key combinations (continued) Key combination Description F or Windows 7: Switch a display output location • Computer display only (L CD) • Computer display and ext ernal monitor (same.
Chapter 7. FRU replacement notices External CRU statement to customers: Some problems with your pr oduct can be r esolved with a replacement part you can install yourself, called a “Cust omer Replaceable Unit” or “CRU . ” Some CRUs are designated as Self-service CRUs and others are designated as Optional-service CRUs.
• T orque driver If you have a tor que driver , refer to the “T or que” column for each step. • Make sur e that you use the corr ect screw . If you have a tor que screwdriver , tighten all screws rmly to the tor que shown in the table. Never use a screw that you removed.
MTM on rear label: TTTT -C TO S/N SSSSSSS Product ID on r ear label: TTTT -MMM (Use this number when setting Serial Number) In the example, the Serial Number to be input is '1S TTTTMMMSSSSSSS'.
60 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
Chapter 8. Removing and replacing a FRU External CRU statement to customers: Some problems with your pr oduct can be r esolved with a replacement part you can install yourself, called a “Cust omer Replaceable Unit” or “CRU . ” Some CRUs are designated as Self-service CRUs and others are designated as Optional-service CRUs.
Before servicing ThinkP ad X200 T ablet and X201 T ablet Removing the SIM card: Some models of the ThinkPad X200 T ablet and X201 T ablet you are servicing might have the SIM car d that the customer has been installed. If the computer you are servicing has the SIM car d, remove it before you start the servicing.
1010 Digitizer pen T able 9. Removal steps of digitizer pen 1020 Battery pack Important notice for replacing a battery pack: Lenovo ThinkV antage T oolbo x (in Windows 7) and L enovo System T oolbo x (in Windows Vista and Windows XP) have an automatic battery diagnostic that determines if the battery pack is defective.
T able 10. Removal steps of battery pack Unlock the battery release lever . Holding the battery release lever in the unlocked position 1 , remove the battery pack in the direction shown by arrow 2 . When installing: Install the battery pack along the slide rails of the slot.
T able 11. Removal steps of HDD cover , HDD , and HDD drive rubber rails or SSD and storage converter Step Screw (quantity) Color T or que 1 Hard disk drive scr ew, M3 × 3 mm, wafer -head, nylon-coated (1) Black 0.
T able 11. Removal steps of HDD cover , HDD , and HDD drive rubber rails or SSD and storage converter (continued) When installing: Make sure that the HDD connector or SSD connector is attached rmly . HDD and HDD rubber rails: When installing: The rubber rails on the hard disk drive must be attached to the replacement drive.
T able 11. Removal steps of HDD cover , HDD , and HDD drive rubber rails or SSD and storage converter (continued) When installing: When you install the SSD in the st orage converter , do as follows. 1040 DIMM F or access, r emove this FRU in order: • “1020 Battery pack” on page 63 T able 12.
T able 12. Removal st eps of dimm (continued) F or ThinkP ad X200 T ablet: Note: If only one DIMM is used on the computer you ar e servicing, the car d must be installed in SL O T -0 ( a ), but not in SL OT -1 ( b ).
T able 12. Removal st eps of dimm (continued) When installing: Insert the notched end of the DIMM into the socket. Pr ess the DIMM rmly, and pivot it until it snaps int o the place. Make sur e that it is rmly xed in the slot and does not move easily .
T able 13. Removal steps of hinge caps (continued) Open the L CD unit, and then r emove the hinge cap (fr ont). Close the L CD unit, and then r emove the hinge cap (r ear).
T able 14. Removal steps of keyboard Step Icon Screw (quantity) Color T or que 1 M2 × 6 mm, wafer-head, nylon-coated (4) Black 0.181 Nm (1.85 kgfcm) Chapter 8 .
T able 14. Removal steps of keyboard (continued) Lift the keyboar d a little in the direction shown by arr ow 4 , and then detach the connect or 5 . When installing: 1. Attach the keyboard connector rmly . 2. Make sure that the k eyboard edges are under the frame as shown in this gur e.
T able 14. Removal steps of keyboard (continued) 3. T o make sur e that the front side of the keyboard is housed rmly, gently pr ess the keys with your thumbs and try t o slide the keyboar d toward you. 4. Secur e the keyboard by tightening the scr ews from the bottom side of the comput er .
T able 15. Removal steps of Extension cable card Step Screw (quantity) Color T or que 1 M2 × 3 mm, at-head, nylon-coat ed (5) Black 0.181 Nm (1.85 kgfcm) 2 M2 × 6 mm, at-head, nylon-coat ed (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sur e that the connectors ar e attached rmly .
T able 16. Removal steps of palm rest Step Icon Screw (quantity) Color T or que 1 M2 × 6 mm, wafer-head, nylon-coated (5) Black 0.181 Nm (1.85 kgfcm) Chapter 8 .
T able 16. Removal steps of palm rest (continued) When installing: When you attach the palm rest, do as follows: 1. Attach the touch pad connector rmly t o the system boar d. 2. P ress the left and right top edges of the palm r est to t it into place.
T able 17. Removal steps of backup battery When installing: Make sure that the batt ery connector is attached rmly . 1100 PCI Expr ess Mini C ard for wir eless LAN/WiMAX F or access, remove these FRUs in or der: • “1020 Battery pack” on page 63 • “1060 Keyboar d” on page 70 • “1080 P alm r est” on page 74 Chapter 8 .
T able 18. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX F ull siz e PCI e xpress mini car d: In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your ngers and gently unplug them in dir ection of the arr ow.
T able 18. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX (continued) When installing: • In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled MAIN or M on the card, and the black cable into the jack labeled AUX or A .
T able 18. Removal steps of PCI Express Mini Card for wireless LAN/WiMAX (continued) When installing: Plug the gray cable into the jack labeled MAIN on the card, and the black cable int o the jack labeled A UX .
T able 19. Removal steps of PCI Express Mini Card for wireless W AN (continued) Step Screw (quantity) Color T or que 3 M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: When you install the car d, plug the r ed cable int o the jack labeled MAIN on the card, and the blue cable into the jack labeled AUX .
T able 19. Removal steps of PCI Express Mini Card for wireless W AN (continued) 1120 Intel T urbo Memory Minicard or Wireless USB PCI Express Half-Mini C ard F or access, remove these FRUs in or der: • “1020 Battery pack” on page 63 • “1060 Keyboar d” on page 70 • “1080 P alm r est” on page 74 T able 20.
T able 20. Removal steps of Intel T urbo Memory Minicard or Wireless USB PCI Express Half-Mini Card (continued) When installing: In models with the Wir eless USB PCI Express Half-Mini Car d, plug the yellow cable int o the jack on the card. 1130 Bluet ooth daughter card (BDC-2.
T able 21. Removal steps of Bluetooth daughter card (continued) When installing: Make sur e that the connector 2 is attached rmly . T urn the Bluet ooth daughter car d over , and then disconnect the cable from the connect or . When installing: Make sur e that the connector 4 is attached rmly .
T able 22. Removal steps of keyboard bezel (continued) 2 M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) Step Screw (quantity) Color T or que 3 M2 × 2 mm, wafer -head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) Rotate the L CD unit as shown in this gure.
T able 22. Removal steps of keyboard bezel (continued) In st ep 5 , detach the claws. Then remove the keyboard bezel in the direction shown by arr ow 6 . Attention: When you service the keyboard bezel, avoid any kind of rough handling. When installing: Make sur e that all the claws are attached rmly .
T able 23. Removal steps of I/O card assembly Step Screw (quantity) Color T or que 5 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the speaker connector is attached rmly . Note: The cable is secured with a double-faced adhesive tape.
T able 23. Removal steps of I/O card assembly (continued) T urn the I/O card over , and then disconnect the cable fr om the ip-lock ZIF connector . 1160 USB sub car d F or access, remove these FRUs.
T able 24. Removal steps of USB sub card Step Screw (quantity) Color T or que 1 M2 × 6 mm, wafer -head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) T urn the USB sub car d over , an then disconnect the cable fr om the connector .
T able 24. Removal steps of USB sub card (continued) When installing: Route the cable as shown in this gure. 1170 L CD assembly F or access, remove these FRUs in or der: • “1010 Digitizer pen.
T able 25. Removal steps of L CD assembly (continued) 1 M2.5 × 6 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) Step Screw (quantity) Color T or que 2 M2.
T able 25. Removal steps of L CD assembly (continued) 92 ThinkP ad X200 T ablet and X201 T ablet Har dware Maintenance Manual.
T able 25. Removal steps of L CD assembly (continued) When installing: Rout e the antenna cables along the cable guides and secure them with the tapes. As you r oute the cables, make sure that they are not subjected t o any tension. T ension could cause the cables to be damaged by the cable guides, or a wir e t o be br oken.
T able 26. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) Step Screw (quantity) Color T or que 1 M2 × 3.
T able 26. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) Step Screw (quantity) Color T or que 4 M2 × 3.5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) In step 6 and 7 , remove the digitizer pen case assembly .
T able 26. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) Step Screw (quantity) Color T or que 8 M2 × 3.5 mm, wafer-head, nylon-coated (6) Silver 0.181 Nm (1.85 kgfcm) When installing: Attach the wir eless radio switch as shown in the gur e a .
T able 26. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) T urn the system boar d over , and then disconnect the DC-in connector , the fan connect or , and the pen switch connector from the system boar d.
T able 26. Removal steps of DC-in connector , fan, digitizer pen case, and pen switch assembly (continued) When installing: • Before you attach the fan assembly t o the comput er , apply thermal gr ease, at an amount of 0.2 grams, on the part marked a as in the following gur e.
Active Pr otection still functions (see below). Note: If the test shows that HDD Active Pr otection is not functioning, be sur e t o document the drop in any reject report, and r eplace the system boar d. • A void r ough handling of any kind. • At every point in the pr ocess, be sure not to drop or stack the system board.
T able 27. Removal steps of system boar d and ExpressCard slot assembly (continued) Bottom F or ThinkP ad X201 T ablet: a CPU b PCH (Platform Controller Hub) c Acceleromet er chip for the HDD Active P.
T able 27. Removal steps of system boar d and ExpressCard slot assembly (continued) Note: The Expr essCard slot assembly is attached to the system board. F or ThinkP ad X200 T ablet: F or ThinkP ad X201 T ablet: Step Screw (quantity) Color T orque 1 M2 × 3.
1200 Base cover and speak er assembly F or access, remove these FRUs in or der: • “1010 Digitizer pen” on page 63 • “1020 Battery pack” on page 63 • “1050 Hinge caps” on page 69 • .
Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of sever al kinds. When you r eplace the base cover , you need to apply the following labels: 2 Homolo.
F or some models, you need to apply one or two FCC labels, 7a and 10 . Check the old base cover; if it has one or two FCC labels, nd duplicates of them in the label kit and apply them to the new base cover .
T able 29. Removal steps of L CD front bezel for pr otection plate L CD model (continued) 1 M2.5 × 8 mm, wafer -head, nylon-coat ed (5) Black 0.392 Nm (4 kgfcm) When installing: A ttach the ngerprint r eader connector rmly .
T able 30. Removal steps of L CD front bez el for t ouch panel L CD model or direct-bonding glass L CD model (continued) Step Screw cap Screw (quantity) Color T or que 1 M2.5 × 8 mm, wafer -head, nylon-coat ed (9) Black 0.392 Nm (4 kgfcm) 2 M2 × 3 mm, at-head, nylon-coated (6) Black 0.
T able 30. Removal steps of L CD front bez el for t ouch panel L CD model or direct-bonding glass L CD model (continued) When installing: Make sure that attach the ngerprint reader connector rmly .
T able 31. Removal steps of Micro-Processor card (continued) When installing: Make sur e that the connector 1 is attached rmly . Protection plate L CD model Step Screw (quantity) Color T or que 2 M2 × 3.5 mm, wafer-head, nylon-coated (3) Silver 0.
T able 31. Removal steps of Micro-Processor card (continued) 3 M2 × 3 mm, height 5.5 mm, stud, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) When installing: Make sur e that the connector 5 is attached rmly .
T able 32. Removal steps of inverter card (continued) Step Screw (quantity) Color T or que 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.
T able 33. Removal steps of hinge Step Screw (quantity) Color T or que 1 M2.5 × 6 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) Detach the hinge from the L CD rear cover , and gently pull the cables out thr ough the guide hole in the hinge.
• “1140 Keyboar d bezel” on page 84 • “1170 L CD assembly” on page 90 • “2010 L CD front be zel” on page 104 • “2020 Micr o-Pr ocessor car d” on page 107 • “2030 Inverter car d” on page 109 • “2040 Hinges” on page 110 T able 34.
T able 34. Removal steps of L CD panel and L CD cable for prot ection plate L CD model (continued) When installing: Make sur e that all the claws are attached rmly . Note: St ep 5 is only for models with the int egrated camera. F or models without the int egrated camer a, skip step 5 .
T able 34. Removal steps of L CD panel and L CD cable for prot ection plate L CD model (continued) When installing: Make sur e that the connector 5 is attached rmly . T urn the L CD panel over , and then r emove the L CD cable from the L CD panel. When installing: Make sure that the L CD cable connect or are attached rmly .
T able 35. Removal steps of L CD panel, LCD bracket L and R, and LCD cable for touch panel L CD model or direct-bonding glass L CD model (continued) 1 M2 × 3.5 mm, wafer-head, nylon-coated (5) Silver 0.181 Nm (1.85 kgfcm) Note: St ep 2 is only for models with the int egrated camera.
T able 35. Removal steps of L CD panel, LCD bracket L and R, and LCD cable for touch panel L CD model or direct-bonding glass L CD model (continued) Remove the LCD br acket L and R a . Step Screw (quantity) Color T or que 4 M2 × 2 mm, wafer -head, nylon-coated (4) Black 0.
T able 35. Removal steps of L CD panel, LCD bracket L and R, and LCD cable for touch panel L CD model or direct-bonding glass L CD model (continued) Multitouch panel L CD model: When installing: Make sure that the L CD cable connect or are attached rmly .
T able 36. Removal steps of Integrated camera Step Screw (quantity) Color T or que 1 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) 2070 L CD rear cover and wireless antenna c.
T able 37. Removal steps of L CD rear cover and wireless antenna cables Note: Step 1 is only for prot ection plate L CD model. F or touch panel L CD model or direct-bonding glass L CD model, skip step 1 . Step Screw (quantity) Color T or que 1 M2 × 3.
T able 37. Removal steps of L CD rear cover and wireless antenna cables (continued) In st ep 4 , r elease the antenna cables from the cable guides of the rear cover .
T able 37. Removal steps of L CD rear cover and wireless antenna cables (continued) Step Screw (quantity) Color T or que 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Place the antenna assembly as shown in this gure.
T able 37. Removal steps of L CD rear cover and wireless antenna cables (continued) Attention: As you r oute the antenna cables, make sure that they ar e not subjected to any tension. T ension could cause the cables to be damaged by the cable guides, or a wir e to be br oken.
Chapter 9. Locations This chapter pr esents the location of ThinkPad X200 T ablet and X201 T ablet featur es and hardwar e. F ront view 1 Center latch 2 Integrated camer a (for some models) 3 Universa.
17 P ower switch Rear view 1 Status indicators Note: F or the description of each indicator , see Chapt er 5 “Status indicators” on page 51 . 2 ExpressC ard slot 3 Wireless r adio switch 4 Univers.
Rear view (tablet mode) 1 T ablet buttons 2 Fingerprint r eader 3 S tatus indicat ors Note: F or the description of each indicat or , see Chapter 5 “Status indicators” on page 51 .
Bottom view 1 Battery pack 2 Battery pack latch 3 Docking connect or 4 DIMM slots 5 LCD cover latch 6 Built-in speak ers 7 5-in-1 Media Card Reader or 3-in-1 Media Card Reader slot Rear view (ThinkP a.
Bottom view (ThinkP ad X200 UltraBase) 1 Batt ery char ger (behind the ip-down door) 2 Ultr aBase eject r equest butt on 3 Ultr aBase eject lever 4 P ower button security latch 5 P ower button 6 Built-in ster eo speakers Chapter 9 .
128 ThinkP ad X200 T ablet and X201 T ablet Har dware Maint enance Manual.
Chapter 10. P arts list This section contains following lists of the service parts. • “Over all” on page 130 • “L CD FRUs for touch panel L CD or dir ect-bonding glass L CD” on page 160 .
Overall T able 38. P arts list - Overall No. FRU FRU no. CRU ID a See “Miscellaneous parts” on page 178. 1 L CD unit (see “L CD FRUs for t ouch panel L CD or direct-bonding glass L CD” on page 160 or “L CD FRUs for protection plat e L CD” on page 169 .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 7 Int el T urbo Memory 2-GB Minicard • 4184-CT O , 8Ex, 97x, E4x, E6x, E7x, EFx, EGx, ENx • 7448-CT O , 8Dx, 9Dx, E3x, E5x, E8x,.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 8 Syst em boar d with Int el Cor e 2 Duo mobile processor SU9300 without TPM (1.2 GHz) • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O • 7453-CT O • 2263-CT O • 2266-CT O 60Y3884 N 8 Syst em boar d with Intel Cor e 2 Duo mobile processor SU9400 with TPM (1.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 8 Syst em boar d with Intel Cor e 2 Duo mobile processor SL9300 without TPM (1.6 GHz) • 4184-CT O • 7448-CT O , 2Ex • 7449-CT .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 8 Syst em boar d with Int el® Cor e™ 2 Solo mobile processor SU3500 with TPM (1.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 8 Syst em board with Intel Core i7-620LM L V with TPM for T AA • 0053-CT O • 0831-CT O • 2985-CT O • 3093-CT O , Q2x • 311.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 9 1-GB DDR3-1066 SDRAM SO-DIMM (PC3-8500) Low Halogen • 0053-CT O , 76x • 0831-CT O , A4x • 2985-CT O , DHx, E2x, E5x • 3093.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 9 2-GB DDR3-1333 SDRAM SO-DIMM (PC3-10600) car d Low Halogen • 0053-CT O • 0831-CT O • 2985-CT O • 3093-CT O • 3113-CT O .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 10 Ericsson F3507g Other - Wireless W AN card • 4184-CT O • 7448-CT O • 7449-CT O , 2Rx, 2Tx, 4Dx, 4Ex, 4Fx, 4Hx, 4Lx, 4Mx, 4N.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 11 ThinkP ad 11b/g/n Wireless LAN Mini-PCI Expr ess Adapter II • 4184-CT O , 53x, 54x • 7448-CT O , 38x, 3Ax, 3Ex • 7449-CT O .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 11 Intel Centrino Ultimat e-N 6300 • 0053-CT O , 77x • 0831-CT O • 2985-CT O , CNx, CPx, CRx, D5x, D6x, D7x, DJx, DKx, DLx, DM.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 12 I/O car d assembly with modem connector , with 5-in-1 Media Car d Reader for X201 T ablet • 0053-CT O ,72x, 73x, 74x, 75x, 76x,.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 13 Battery pack, 8 cell, 12++ • 4184-CT O , E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, FFx, FGx, H4x, H6x • 7448-CT O , 2Qx, 3Bx, 3.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 80 GB, 5,400 rpm • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O • 7453-CT O • 2263-CT O •.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 160 GB, 5,400 rpm • 4184-CT O , 25x, E4x, E6x, E7x, F4x, F5x, FBx, FCx, H6x • 7448-CT O , 2Ex, 2Qx, .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, 5,400 rpm OP • 4184-CT O , 2Vx, 53x, 8Ex, 97x, EFx, EGx, ENx, F7x, F8x, FFx, FGx, GMx, GNx, H4.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, 5,400 rpm • 4184-CT O , 2Vx, 53x, 8Ex, 97x, EFx, EGx, ENx, F7x, F8x, FFx, FGx, GMx, GNx, H4x .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, 5,400 rpm • 4184-CT O , 2Vx, 53x, 8Ex, 97x, EFx, EGx, ENx, F7x, F8x, FFx, FGx, GMx, GNx, H4x .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 320 GB, 5,400 rpm • 0053-CT O , 75x, 76x • 0831-CT O , A3x, A4x • 2985-CT O , R4x, CEx, CFx, D8x, .
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 160 GB , 7,200 rpm OP • 4184-CT O • 7448-CT O , 3Hx 3Nx • 7449-CT O , 2Jx, 45x, 49x, 4Ax, 4Cx, 4Dx.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 250 GB, FDE, 7,200 rpm • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O • 7453-CT O • 2263-CT.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 320 GB, 7,200 rpm • 4184-CT O • 7448-CT O , 3Jx • 7449-CT O , 47x, 4Ex, 4Fx, 4Lx, 4Mx, 4Nx • 745.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 16 SA T A har d disk drive, 500 GB, 7,200 rpm • 0053-CT O , 77x • 0831-CT O • 2985-CT O , CHx, CJx, CMx, CNx, CPx, CRx, CSx, C.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 19 SA T A solid state drive, 80 GB • 4184-CT O • 7448-CT O • 7449-CT O , GGx • 7450-CT O , 8Ux, FUx • 7453-CT O • 2263-C.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 19 SA T A solid state drive, 160 GB • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O , GXx • 7453-CT O • 2263-CT O • 22.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 21 DVD/CD-RW combo drive • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O • 7453-CT O • 2263-CT O • 2266-CT O 42T2543 *.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 21 DVD-RAM/RW drive • 4184-CT O • 7448-CT O , 3Bx, 3Cx, 3Dx • 7449-CT O , 45x, 47x, 4Ax, 4Bx, 4Wx, 84x, 88x, 8Fx, 8Jx, 8Rx, 8S.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 21 Blu-Ray disk drive • 4184-CT O • 7448-CT O • 7449-CT O • 7450-CT O , GVx • 7453-CT O • 2263-CT O • 2266-CT O 42T260.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 24 Bluetooth daught er car d (BDC-2.1) • 0053-CT O , 72x, 73x, 76x, 77x, 78x, 79x, 7Ax, 7Bx, 7Dx, 7Ex • 0831-CT O , A4x, A5x, A6.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 26 F an assembly for L V • 4184-CT O , 2Vx, 53x, 54x, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, F.
T able 38. P arts list - Overall (continued) No. FRU FRU no. CRU ID 26 F an assembly for UL V • 4184-CT O , 25x • 7448-CT O , 38x, 3Ax, 3Dx, 9Kx, 9Lx • 7449-CT O , 25x, 4Sx, 4Tx, C6x, C7x, C8x, .
Chapter 10 . P arts list 161.
T able 39. P arts list - 12.1-in. WXGA TFT for t ouch panel L CD or direct-bonding glass L CD No. FRU FRU no. CRU ID b - c See “Miscellaneous parts” on page 178.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 1 L CD panel, 12.1-in. WXGA, LED backlight for multi-t ouch panel • 41.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 2 L CD panel, 12.1-in. WXGA, LED backlight for single-touch panel • 41.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 3 L CD bracket L and R for multitouch panel • 4184-CT O • 7448-CT O .
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 4 Integr ated camer a • 0053-CT O , 72x, 73x, 75x, 76x, 77x, 78x, 79x,.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 6 Wireless LAN/W AN antenna assembly • 4184-CT O , E4x, E6x, E7x, E9x,.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 6 Wireless LAN/W AN/USB antenna assembly • 4184-CT O , H4x, H6x • 74.
T able 39. P arts list - 12.1-in. WXGA TFT for touch panel L CD or direct-bonding glass L CD (continued) No. FRU FRU no. CRU ID 10 Micr o-Pr ocessor car d for single-t ouch panel or dir ect-bonding gl.
170 ThinkP ad X200 T ablet and X201 T ablet Har dware Maint enance Manual.
T able 40. P arts list - 12.1-in. WX GA TFT for protection plate L CD No. FRU FRU no. CRU ID b - c See “Miscellaneous parts” on page 178. 1 L CD panel, 12.
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 1 L CD panel, 12.1-in. WXGA, LED backlight (300-nit L CD) • 4184-CT O , 53x, 54x • 7448-CT .
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 2 L CD bezel cover without ngerprint reader • 4184-CT O , 2Vx, 53x • 7448-CT O , 2Ex, 3F.
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 4 L CD cable assembly, LED backlight • 4184-CT O , 53x, 54x, 8Ex • 7448-CT O , 38x, 3Ax, 3B.
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 5 Wireless LAN/W AN antenna assembly • 4184-CT O , 25x, 2Vx, 53x, 54x, 8Ex, 97x • 7448-CT O.
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 6 L CD rear cover assembly, LED backlight • 4184-CT O , 53x, 54x, 8Ex • 7448-CT O , 38x, 3A.
T able 40. P arts list - 12.1-in. WXGA TFT for prot ection plate L CD (continued) No. FRU FRU no. CRU ID 10 Micro-P rocessor card • 4184-CT O , 53x, 54x, 8Ex • 7448-CT O , 38x, 3Ax, 3Bx, 3Cx, 3Fx,.
T able 41. P arts list - K eyboard (continued) Language P/N CRU ID Icelandic 42T3769 42T3703 Italian 42T3747 42T3681 Japanese 42T3762 42T3696 Kazakhstan 42T4136 42T4133 Kor ean 42T3764 42T3698 Latin A.
T able 42. P arts list - Miscellaneous parts (continued) FRU P/N CRU ID • 4184-CT O , 25x, 2Vx, 8Ex, 97x, E4x, E6x, E7x, E9x, EFx, EGx, ENx, ESx, F4x, F5x, F7x, F8x, FBx, FCx, FFx, FGx, GMx, GNx, H4.
T able 42. P arts list - Miscellaneous parts (continued) FRU P/N CRU ID Base cover miscellaneous parts kit: • Battery latch • Battery latch spring • L -case ESD plat e • L -case Kensingt on on.
T able 44. P arts list - 2-pin power cords Country or region FRU no. CRU ID Argentina • models -C TO , xxY 42T5020 42T5105 Brazil • models -C TO , xxP 42T5180 42T5183 Canada, U .S. • models -CT O , xxF , xxL, xxS, xxU 42T5008 42T5093 Japan • models -C T O, xxE, xxJ 42T5014 42T5099 * T able 45.
• 7448-CT O , 36x, 3Ax, 3Hx, 8Wx, F5x, F8x, FCx, FGx, GMx, GNx • 7449-CT O , 43x, 45x, 47x, 49x, 4Ax, 4Lx, 4Nx, 84x, 8Fx, 8Jx, 8Rx, 9Ex, 9Fx, CCx, EYx, F9x, FNx • 7450-CT O , 2Hx, 2Lx, 63x, 67x, 6Ax, 6Ex, 6Gx, 6Hx, 9Gx, D7x, D8x, D9x, D Ax, EYx, FDx, FNx, G4x • 7453-CT O , 6Ax, 9Gx, FDx • 2263-CT O • 2266-CT O T able 46.
T able 47. Parts list - Windows XP T ablet (32 bit) recovery DVDs Language P/N CRU ID English 76Y1314 English (modem-disabled) 76Y1313 F rench 76Y1304 German 76Y1305 Italian 76Y1306 Japanese 76Y1307 K.
T able 48. P arts list - Windows Vista Home Premium (32 bit) DVDs (continued) Language P/N CRU ID Russian 58Y3039 Russian (English-enabled) 58Y3038 Simplied Chinese 58Y3027 Spanish 58Y3040 T r aditional Chinese 58Y3028 T r aditional Chinese (Hong Kong S.
T able 49. P arts list - Windows Vista Business (32 bit) DVDs (continued) Language P/N CRU ID Norwegian 58Y3011 P olish 58Y3012 P ortuguese 58Y3013 Romanian 58Y3015 Russian 58Y3016 Russian (English-en.
T able 51. P arts list - Windows Vista Business (32 bit) DVDs Language P/N CRU ID English 58Y3073 English (modem-disabled) 58Y3072 German 58Y3070 Japanese 58Y3071 Simplied Chinese 58Y3069 * Windows.
T able 52. P arts list - Windows Vista Ultimate (32 bit) DVDs (continued) Language P/N CRU ID T r aditional Chinese (Hong Kong S.A.R.) 58Y3054 T urkish 58Y3064 Windows 7 Home Basic (32 bit) DVDs Windo.
T able 54. Parts list - Windows 7 Home P remium (32 bit) DVDs Language P/N CRU ID Brazilian P ortuguese 58Y3916 English 58Y3930 English (for India) 58Y3919 English (modem-disabled) 58Y3929 F rench 58Y.
• 7450-CT O • 7453-CT O • 2263-CT O • 2266-CT O T able 56. Parts list - Windows 7 Home P remium (64 bit) DVDs Language P/N CRU ID English 58Y3936 English (for India) 58Y3932 Japanese 58Y3933 P.
• 2263-CT O • 2266-CT O T able 58. P arts list - Windows 7 P rofessional (32 bit) DVDs Language P/N CRU ID Brazilian P ortuguese 58Y3862 Czech 58Y3865 Danish 58Y3866 English 58Y3889 English (modem.
• 3093-CT O , 21x, 22x, 23x, 24x, 25x, 26x, 27x, 28x, 29x, 2Ax, 2Bx, 2Cx, 2Dx, 2Ex, 2Fx, 2Gx, 2Hx, 2Jx, 2Kx, 2Lx, 2Mx, 2Sx, 2Tx, 2Vx, 2Xx, 2Yx, 2Zx, 32x, 33x, 34x, 35x, 37x, 38x, 3Dx, 3Ex, 3Fx, 3Gx,.
Windows 7 P rofessional (64 bit) DVDs Windows 7 Pr ofessional (64 bit) is pr einstalled as the oper ating system in the following models: • 4184-CT O • 7448-CT O , 3Nx • 7449-CT O • 7450-CT O , 6Xx, 6Yx, DBx, DCx, DDx • 7453-CT O , DDx • 2263-CT O • 2266-CT O T able 60.
T able 61. P arts list - Windows 7 Professional (64 bit) DVDs (continued) Language P/N CRU ID Japanese 76Y1494 Simplied Chinese 76Y1487 Spanish 76Y1495 T r aditional Chinese (Hong Kong S.
disclaimer of e xpress or implied warranties in certain transactions, ther efore, this statement may not apply to you. This information could include t echnical inaccuracies or typogr aphical err ors. Changes are periodically made to the information her ein; these changes will be incorpor ated in new editions of the publication.
Intel Core 2 Solo Other company, product, or service names may be the tr ademarks or service marks of others. Chapter 10 . P arts list 195.
196 ThinkP ad X200 T ablet and X201 T ablet Har dware Maint enance Manual.
.
Part Number: 45N3683_03 Printed in China (1P) P/N: 45N3683_03 *45N3683_03*.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenovo 3093AC6 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenovo 3093AC6 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenovo 3093AC6, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenovo 3093AC6 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenovo 3093AC6, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenovo 3093AC6.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenovo 3093AC6. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenovo 3093AC6 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
