Manuel d'utilisation / d'entretien du produit 10120/90A0 [K450 NON-ES] du fabricant Lenovo
Aller à la page of 69
V ersion 3.0 2012.12 User Guide IdeaCentr e K4 Series Machine type: 10086/3109/4743 [K430] 10089/1168/4744 [K410] 10090/2556/4748 [K415] 10121/90A1 [K450 ES] 10120/90A0 [K450 Non-ES] 31503699.
Important Safety Information Before using this manual, it is important that you r ead and understand all of the related safety information for this pr oduct. Refer to the Safety and Warranty Guide that you received with this pr oduct for the latest safety information.
.
i Contents Contents Important Safety Information Using the Computer Hardwar e ................................................. 1 Front view of the chassis ............................................................................2 Rear view of the chassis .
ii Contents Using the Software ................................................................... 29 Lenovo Support .......................................................................................30 T r oubleshooting and Confirming Setup ....
This cha pter cont ains the fol lowin g topics: Introduction to the computer har dware Information on computer connections Note: The descriptions in this chapter might be differ ent from what you see on your computer , depending on the computer model and configuration.
2 User Guide Fr ont view of the chassis Attention: Be careful not to block any air vents on the computer . Blocked air vents can cause overheating. Power button Power Control Switch indicator ON/OFF (.
3 User Guide Rear view of the chassis (If the rear view configuration shown in this chapter is dif ferent from the r ear of your computer , please refer to the rear of your computer .
4 User Guide PCI Express X 1 adapter slots (some models ar e equipped with a WIFI card or TV tuner card) IdeaCentre K430 V oltage selection switch (selected models only) Power connector HDMI connector.
5 User Guide PCI Express X 1 adapter slots (some models ar e equipped with a WIFI card or TV tuner card) IdeaCentre K410 V oltage selection switch (selected models only) Power connector USB connectors.
6 User Guide IdeaCentre K415 V oltage selection switch (selected models only) Power connector USB connectors (USB ports 4 to 6) HDMI connector (selected models only) On-board VGA connector Ethernet co.
7 User Guide Basic connector instructions Connector Description Microphone Use this connector to attach a microphone to your computer when you want to r ecord sound or if you use speech-recognition softwar e.
8 User Guide Connecting your computer Note: Y our computer may not have all of the connectors described in this section. Check the position of the voltage-selection switch on the rear of the computer . Use a ballpoint pen to slide the switch if necessary .
9 User Guide 5.1 Audio configuration instructions This model of computer supports the transformation of stereo sound into 5.1 surround sound. Use the following guides when connecting to the 5.
10 User Guide 7.1 Audio configuration instructions Use the following illustration when connecting a 7.1 surround sound audio system S/PDIF out connector Microphone input Connector Center / Low freque.
11 User Guide 3. Select 7.1 surround fr om audio channels in the pop-up Speaker setup dialog box and proceed with the speaker setup by following the pr ompts.
12 User Guide Display connecting instructions when playing Blu-ray Discs Note: Only some models are equipped with Blu-ray optical drive. Check the connectors available on your computer and display and select an appropriate cable accor ding to the table below .
13 User Guide Wireless network connection For wireless networks, you can use the built-in wir eless LAN antenna to access your wireless home network. T o connect your computer to the wireless network: 1. Move the cursor to the top right or bottom right corner of the screen, then click Settings .
14 User Guide Hot-swappable har d disk (selected models only) • Components Hot-swappable hard disk USB adapter USB cable Y ou can plug in the hot-swappable hard disk while the computer system using it is working, without damaging the hard disk data.
15 User Guide Method 2: Pull the hot-swappable hard disk drive out of the drive bay , then connect the hot-swappable hard disk drive to the other computer . Notes: • Donotunplugtheharddiskwhileitiscopyingdata,asthismayr esult in loss of data.
16 User Guide • Afterremovingthehar ddisk,becarefulnottodamageit. • IntheRescueSystemprogram,thehot-swappablehar ddiskcannot be recognised.
17 User Guide Open the runni ng status for each component under the Mode Switch: CPU — Show the percentage of the current CPU clock frequency against the nominal maximal CPU clock frequency .
18 User Guide Note: The numeric values may vary because each model is configured dif ferently . COOL The CPU runs at low frequency . The system consumes minimum power . T oggle the Power Control Switch to the Cool position to enable this mode. AUTO Auto adjust the system CPU clock frequency and running speed.
19 User Guide TURBO The CPU runs at full speed. The system achieves its optimal performance. T oggle the Power Control Switch to the T urbo position to enable this mode. Note: The numeric values may vary because each model is configured dif ferently .
20 User Guide Notes: • Whenyouarerunningsystem-intensivegamesorotherpr ogramsthat consume a high proportion of the system r esources, you should choose T urbo mode. This will allow you to achieve optimal performance.
Using Windows 8 This chapter contains the following topics: Switching between the main Windows 8 interfaces The Charms Bar Shutting down the computer Switching between apps Closing.
22 User Guide Switching between the main Windows 8 interfaces Windows 8 comes with two main user interfaces: the Start Screen and the Windows desktop. T o switch from the Start Screen to the Windows desktop, do one of the following: • SelecttheWindowsdesktoptileontheStartScreen.
23 User Guide Switching between apps Sometimes you want to get back to an app you were just using, or quickly switch through your r ecent apps. T o switch between apps: Move the cursor to the top left corner , then click to bring in the next app.
24 User Guide.
Using the Rescue System This chapter contains the following topics: OneKey Recovery Driver and Application Installation Attention: UsingOneKeyRecoverywillresult in loss of data.
26 User Guide Note about the service partition: The files and relevant data used by the r escue system are saved in the service partition. Deleting this partition will make the rescue system unusable.
27 User Guide Driver and Application Installation The Driver and Application Installation function in the rescue system pr ovides a way for the user to conveniently reinstall all of the Lenovo applications and drivers that were shipped with your Lenovo har dware.
28 User Guide.
Using the Softwar e This chapter contains the following topic: Software instructions Note: The interface and functionality of these features will depend on which softwar e was shipped with the computer model you purchased.
30 User Guide Lenovo Support The Lenovo Support program enables you to r egister your computer with Lenovo, download and view user manuals for your computer , get the warranty information of your computer , and explore help and support information.
T r oubleshooting and Confirming Setup This chapter contains the following topic: T roubleshooting and Problem Resolution User Guide 31.
32 User Guide Solving Pr oblems Follow these tips when troubleshooting your computer: • Ifyouaddedorremovedapartbefor etheproblemstarted,reviewthe installation procedur es to ensure that the part is correctly installed.
33 User Guide Problem: Ripple on scr een. T roubleshooting and problem r esolution: 1. Check to see if any of the following devices are located less than one meter from the computer: r efrigerators, electric fans, electric dryers, UPS systems, regulators, fluor escent lamps or other computers that may be generating magnetic interference.
34 User Guide T roubleshooting Softwar e Problems Problem: Y ou are unable to exit a running program normally . T roubleshooting and problem r esolution: 1. Press the Ctrl , Alt and Delete keys at the same time, then select the T ask Manager option from the pop-up dialog box.
35 User Guide 2. Confirm that the CD/DVD has been properly placed in the drive. If not, r eload the CD or DVD. Otherwise, continue with the next step of this procedur e. 3. Check the specifications that came with your computer to confirm that this optical drive is capable of reading this type of CD or DVD.
36 User Guide Windows Help and Support If you have a problem with the operating system, see the Windows Help and Support file. T o open the W indows Help and Support file, do one of the following: • Selectthe Settings charm, then select Help .
37 User Guide Performing Daily Maintenance T asks Cleaning the computer components Because many of the computer components consist of sophisticated integrated circuit boar ds, it is very important to periodically clean the computer to prevent dust buildup.
38 User Guide.
This cha pter cont ains the fol lowin g topics: Identifying internal components Identifying parts on the system board Removing the computer cover Removing the front bezel Replacing.
40 User Guide Overview This guide is intended to be used by customers who are r eplacing Customer Replaceable Units (CRUs) as well as trained service personnel who are r eplacing Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referr ed to as parts.
41 User Guide Additional information resour ces The most up-to-date information for your computer is available online at: http://support.lenovo.com. Y ou can find the following information: • Cu.
42 User Guide Handling static-sensitive devices Static electricity , although harmless to you, can seriously damage computer components. When replacing a part, do not open the anti-static packaging containing the new part until the defective part has been removed fr om the computer and you are ready to install the new part.
43 User Guide Locations Identifying internal components The following illustration shows the components inside your computer . 1 2 3 5 4 6 Optical disk drive Hard disk drive Graphics card System board.
44 User Guide Identifying parts on the system board The system board (also known as the “mainboar d” or “motherboard”) is the main circuit boar d in your computer . It provides basic computer functions and supports a variety of devices that are factory-installed or that you can install later .
45 User Guide PCI express X 16 adapter slot SPI debug connector Solid state disk power connector SA T A connectors (4) eSA T A connector Power fan header Front panel connector Front USB 2.
46 User Guide 12V power connector Microprocessor and heat sink Micropr ocessor fan header Memory slots (4) Power connector Fr ont USB header PCI express X 16 adapter slots (2) Power fan header Front p.
47 User Guide 12V power connector Microprocessor and heat sink Micropr ocessor fan header Memory slots (2) Thermal sensor header Power connector Battery SA T A connectors (3) eSA T A connector Power f.
48 User Guide 12V power connector Battery Micropr ocessor and heat sink Micropr ocessor fan header Memory slots (4) Thermal sensor header Mini PCI-E slot Power connector eSA T A connector Power fan he.
49 User Guide Removing the computer cover Attention: • T urnoffthecomputerandwait3to5minutestoletitcooldown before r emoving the cover . • Forthisprocedur e,ithelpstolaythecomputeronaat,stable surface.
50 User Guide Removing the front bezel Note: For this procedur e, it helps to lay the computer on a flat, stable surface. T o remove the front bezel: 1. Remove the computer cover . Refer to “Removing the computer cover”. 2. Remove the front bezel by r eleasing the three plastic tabs inside the chassis and sliding the bezel out as shown.
51 User Guide Replacing a memory module Note: For this procedur e, it helps to lay the computer on a flat, stable surface. T o replace a memory module: 1. Remove the computer cover . Refer to “Removing the computer cover”. 2. Locate the memory module connectors.
52 User Guide 6. K415 Memory Installation Instructions Note: The following instructions apply for model K415 only . Lenovo K415 1 2 3 4 Slot one Slot two Slot three Slot four When installing new memor.
53 User Guide Replacing a hard disk drive Note: For this procedur e, it helps to lay the computer on a flat, stable surface. T o replace a hard disk drive: 1. Remove the computer cover . Refer to “Removing the computer cover”. 2. Disconnect the data and power cables from the har d disk drive.
54 User Guide 6. Slide the new hard disk drive into the drive bay and slide the drive bay into place. 7. Connect the power and signal cables to the new hard disk drive. 8. Reattach the computer cover . Replacing an optical drive Note: For this procedur e, it helps to lay the computer on a flat, stable surface.
55 User Guide Replacing a graphics card Note: For this procedur e, it helps to lay the computer on a flat, stable surface. T o replace a graphics card: 1.
56 User Guide b. Remove the scr ew that secures the graphics card latch to the chassis, open it, and remove the Duo-graphics car ds connector . c. Remove the screw that secur es the graphics card to the chassis. 3 1 2 4 d. Remove the graphics car d by pulling it straight out of the connector .
57 User Guide If your computer has a single graphics card installed, follow the steps below to replace it: a. Remove the screw that secur es the graphics latch to the chassis and open it. b. Remove the scr ew that secures the graphics card to the chassis.
58 User Guide 3. Install the new adapter into the same adapter connector and secure it to chassis with the screw . 4. T urn the graphics card latch to the closed position and secure it with the scr ew . 5. Connect the two graphics cards with the Duo-graphics car ds connector and reattach the Duo-graphics car ds fixing bracket to the chassis.
59 User Guide 4. Remove the TV -T uner card by pulling it straight out of the connector . 5. Install the new TV -tuner into the same connector and secure it to chassis with the screw . 6. T urn the graphics card latch to the closed position and secure it with the scr ew .
60 User Guide Replacing the keyboard and mouse Note: Y our keyboard will be connected to a USB connector at either front or the rear of the computer . T o replace the keyboard: 1. Remove any media (disks, CDs, or memory cards) fr om the drives, shut down the computer , and turn off all attached devices.
61 User Guide Appendix. Declaration Thank you for using Lenovo products. Carefully r ead all documents shipped with your computer before you install and use the product for the first time. Lenovo is not r esponsible for any loss except when caused by installation and operations performed by Lenovo professional service personnel.
62 User Guide T rademarks Lenovo and the Lenovo logo, IdeaCentre and IdeaCentr e logo are trademarks of Lenovo in the United States, other countries, or both. Microsoft, Windows, and W indows Vista are trademarks of the Micr osoft group of companies. Intel Inside is a trademark of Intel Corporation in the U.
63 User Guide Energy Star Statement ENERGY ST AR® is a joint program of the U.S. Envir onmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment thr ough energy efficient products and practices.
64 User Guide T o awaken your computer from a Sleep or System Standby mode, press any key on your keyboard. For mor e information about these settings, refer to your Windows Help and Support information system.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenovo 10120/90A0 [K450 NON-ES] c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenovo 10120/90A0 [K450 NON-ES] - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenovo 10120/90A0 [K450 NON-ES], vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenovo 10120/90A0 [K450 NON-ES] va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenovo 10120/90A0 [K450 NON-ES], mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenovo 10120/90A0 [K450 NON-ES].
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenovo 10120/90A0 [K450 NON-ES]. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenovo 10120/90A0 [K450 NON-ES] ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
