Manuel d'utilisation / d'entretien du produit MDX-G2 du fabricant Kenwood
Aller à la page of 60
MINIDISC PERSONAL STEREO SYSTEM B60-5052-00 00 CH (M) 0102 MDX-G2 INS TRUCTION MANU AL *5052/01-03/EN 5/29/01, 10:28 AM 1.
2 EN THE EXCLAMA TION POINT WITHIN AN EQUILA TERAL TRIANGLE IS INTENDED T O ALERT THE USER T O THE PRESENCE OF IMPORT ANT OPERA TING AND MAINTENANCE (SERVICING) INSTR UCTIONS IN THE LITERA TURE A CCOMP ANYING THE APPLIANCE.
3 EN Contents Caution : Read the pag es mar k ed carefully t o ensur e saf e oper ation. Bef ore applying pow er ................................. 2 Saf ety precautions ........................................ 2 Preparation section S ystem connection .
4 EN System connection P o wer cord (1) Remote control unit (1) B at teries (R6/AA) for remote (2) AM loop antenna (1) Loading batteries in the remote control unit ÷ The provided batteries are intended for use in operation checking, and their service life may be short.
5 EN Preparation section ÷ Be sure to insert eac h connection cord securely . If a cord is plugged in incompletely , audio may not be output or noise may be generated. ÷ Before connecting or disconnecting any connection cord, be sure to first unplug the power cord from the wall power outlet.
6 EN System connection (continued) Connecting other components Headphones Plug the optional headphones equipped with stereo mini-plugs. ÷ When listening audio through speakers, unplug the head- phones from the PHONES jac k.
7 EN Preparation section Main unit only 1 Press the ON/ST ANDBY key to switch the power on. 2 Press and hold the MENU key for more than 2 seconds. 3 Press the VOLUME/MUL TI CON- TROL keys to select the hour fig- ure.
8 EN Presetting radio stations A total of 30 desired stations can be stored in the auto and manual pr eset memory . Presetting stations automatically (AUTO PRESET) 1 Press the TUNER FM/AM key (or the FM/AM key on the remote) so that the “AM” or “FM” band is se- lected.
9 EN Preparation section Remote contr ol unit only 1 Press the FM/AM key so that the “FM” or “AM” band is selected. 2 Press the REPEA T/AUTO/MANU. key so that “AUTO” is displayed. 3 Press the 1 TUNING fi or ¡ TUNING % key to tune in the desired station.
10 EN 1 Press the ON/ST ANDBY key (or POWER key on the remote) to switch the power on. 2 Insert a CD. The CD should be placed horiz ontally on the tray to prev ent malfunction. Do not place it obliquely . (1) Open the CD door by pressing the area marked “PUSH OPEN” on the CD door .
Basic section 11 EN T o take out the CD : Stop playbac k by pressing the 7 S T OP key , then press the area marked “PUSH OPEN” on the CD door to open it.
12 EN MD PERSONAL STEREO SYSTEM STANDBY /TIMER DISC LOADING MECHANISM ON/STANDBY EJECT ONE RANDOM PGM REPEAT TRACK NO. SLEEP DISC O.T.T. PROG. TOTAL O.
Basic section 13 EN 4 Press the VOLUME/MUL TI CONTROL keys to adjust the listening volume. The volume can also be adjusted using the VOL. % / fi keys on the remote. Operation of keys Pur pose Oper ation T o stop playbac k Press the 7 S T OP key . T o let playbac k pause Press the MD 6 k e y .
14 EN MD PERSONAL STEREO SYSTEM STANDBY /TIMER DISC LOADING MECHANISM ON/STANDBY EJECT ONE RANDOM PGM REPEAT TRACK NO. SLEEP DISC O.T.T. PROG. TOTAL O.
Basic section 15 EN Receiving non-preset broadcast stations A radio station can be t uned either b y auto t uning or manual tuning according t o the cur r ent r eception condition. (1) Press the SE T/TUNING MODE k ey on the main unit (or the REPEA T/AU T O/MANU .
16 EN TUNER FM/AM STOP MD CD MENU SOUND MD REC BEST HITS AUX VOL UME /MULTI CONTROL SET TUNING MODE / TUNING 4 TUNING/ ¢ CD/MD High Speed Dubbing System PUSH OPEN MD PERSONAL STEREO SYSTEM STANDBY /TIMER DISC LOADING MECHANISM ON/STANDBY EJECT ONE RANDOM PGM REPEAT TRACK NO.
Basic section 17 EN 4 Press the MD O.T .E. key on the remote. If you ar e oper ating the main unit : (1) Press the MENU k ey . (2) Press the V OLUME/MUL TI CONTROL k e ys to select “MD O .T .E. ?” , then press the SET/TUNING MODE k ey . (3) Pressing the DISPLA Y/CHARA C.
18 EN Playing audio input from AUX component The audio from the AUX component can be monit or ed as follo ws. 1 Press the ON/ST ANDBY key (or POWER key on the remote) to switch the power on. 2 Press the AUX key . 3 Play the component connected to the AUX input jacks.
19 EN Application section The displa yed inf ormation switc hes each time the DISPLA Y/CHARA C. k ey on the re- mote is pressed. 1 . Elapsed play time of the tr ac k being play ed 2. Remaining play time of the tr ac k being play ed 3. Elapsed play time of the disc 4.
20 EN 6. Remaining r ecordable time of the disc ÷ Only the information of 1 to 3 is displa yed during 1 -trac k repeat or random playbac k. ÷ When the display ed time reac hes 1 00 0 min- utes or more, the display sho ws “- - : - -” . Display in pla ybac k The displa yed inf ormation switc hes eac h time the DISPLA Y/CHARA C.
21 EN Application section 1 Press the MENU key , then press the VOLUME/MUL TI CONTROL keys repeatedly to select “TONE SET ?” . Press the SET/TUNING MODE key until “BASS” or “TREBLE” is dis- played. “B ASS” : Lo w frequency lev el ad- justment.
22 EN Main unit only 1 Press the AUX key to select the AUX input. 2 Play the connected AUX compo- nent to check the volume. 3 Press the MENU key . 4 Press the VOLUME/MUL TI CON- TROL keys to select “AUX IN- PUT?”, then press the SET/TUN- ING MODE key .
23 EN Application section Remote contr ol unit only 1 CD : Press the CD 6 key . MD : Press the MD 6 key . 2 Press the 7 STOP key . 3 Press the PGM key .
24 EN Remote contr ol unit only Press the REPEA T/AUTO/MANU. key repeatedly so that “ONE” and “REPEA T” or only “REPEA T” light up. Both “ ONE” and “REPEA T” are lit : Only one trac k will be pla yed repeat- edly . Only “REPEA T” is lit : The trac ks in the entire disc will be play ed repeat- edly .
25 EN Application section Stereo LP modes The MD recorder of the sy stem is compat- ible with stereo long play of MD (MDLP compatible equipment). T he av ailable recording modes include stereo, stereo LP2 and stereo LP4 modes, and they can be used with an y of the music sources whic h can be recorded with the MD recorder of the system.
26 EN Main unit only 1 Press the MENU key . 2 Press the VOLUME/MUL TI CON- TROL keys to select “MD REC MODE”, then press the SET/TUN- ING MODE key . T he currently set recording mode is indicated. 3 Press the VOLUME/MUL TI CON- TROL keys to select the desired recording mode.
Application section 27 EN Recording 1 Make preparation for recording. See steps 1 to 3 in “R ecording CD onto MD” (page 1 6). 2 Press the MENU key . 3 Press the VOLUME/MUL TI CON- TROL keys so that “REC SPEED ?” is displayed, then press the SET/ TUNING MODE key .
28 EN High-speed recording of the CD track being played (Single-track recording) (1) P erform the operations in steps 1 to 4 (page 27). (2) Play the CD trac k to be recorded. (3) Press the MD O .T .E. key on the re- mote. When you are operating the main unit, see step 4 of “R ecording CD onto MD” (page 1 7).
Application section 29 EN Recording Main unit only 1 Insert a recordable MD. 2 Select the music source to be re- corded. CD : Press the CD ^ key . Radio : P ress the TUNER FM/AM ke y . A UX : Press the A UX k ey . If a CD has already been loaded in ad- vance, it starts playing automatically .
30 EN Remote contr ol unit only 1 Make preparation for recording. MD : See steps 1 to 3 of “R ecording CD onto MD” (page 1 6). 2 Program the CD tracks in the de- sired sequence. See steps 1 to 5 of “Playing CD or MD trac ks in the desired sequence ” (page 23).
Application section 31 EN Recording Main unit only 1 Make preparation for recording. See steps 1 to 3 in “Recording CD onto MD” (page 1 6). 2 Press the CD ^ key . 3 Press the & STOP key . If “PGM” is lit, switch it of f by press- ing the PGM k ey on the remote.
32 EN 4 Press the SET key . 5 Press the DISPLA Y/CHARAC. key repeatedly to select the desired character group. Uppercase alphabet group: ABCD ... Lo w ercase alphabet group: abcd... Numeral and symbol group: 0 123... F or c haracters that can be used in ti- tles, see “Title editing c haracter list” (page 34).
33 EN Application section MD edit 0 Press the ) EJECT key on the main unit to eject the MD. “MD WRITING” is display ed. T o stop title input in the middle : Press the MD EDI T ke y an y time bef ore the end of step 8 . Editing can also be canceled provided that it is at tempted before “MD WRITING” is displa y ed.
34 EN T itle editing character list The follo wing c haract ers include uppercase and lo wer case alphabets, numer als and symbols. Available characters in title input using the ¢ or 4 key on the remote control. ABCDEFGHIJKLMNOPQRSTUVWXYZ space abcdefghijklmnopqrstuvwxyz space 0 1 23456789 space ! ”# $ % & ‘ ( ) * + , – .
35 EN Application section MD edit 2 Press the MD EDIT key and press 4 or ¢ key to select “TRACK EDIT”, then press the SET key . Press 4 or ¢ key to select “ 3 Q. MOVE?” , then press the SET key again. 3 Press the 4 or ¢ key repeat- edly to select one of the track numbers to be moved, then press the SET key .
36 EN 5 Press the 4 or ¢ key repeat- edly to select the destination po- sition where you want to insert the moved tracks, then press the SET key . Display when 3 trac ks are inserted be- tween trac ks 33 and 34. 6 Press the ENTER key . 7 Press the ) EJECT key on the main unit to eject the MD.
37 EN Application section MD edit Press 4 or ¢ key to select “ 3 COMBINE ?”, then press the SET key again. 4 Press the 4 or ¢ key repeat- edly to select the later track number that you want to combine with the track selected above, and press the SET key .
38 EN T o cancel the COMBINE operation in the middle: Press the MD EDI T ke y an y time bef ore the end of step 4 . Editing can be canceled provided that it is at tempted bef ore “MD WRITING” is dis- play ed. F or the procedure, see “Canceling editing” (page 42).
39 EN Application section MD edit Press 4 or ¢ key to select “ 3 DIVIDE ?”. 4 Press the SET key again. 5 Press the 4 or ¢ key repeat- edly to select the point where you want to divide the track, and press the SET key . The audio of the 2 seconds around it will be play ed repeatedly .
40 EN 7 Press the ) EJECT key on the main unit to eject the MD. “MD WRITING” is display ed. T o cancel the DIVIDE operation in the mid- dle : Press the MD EDI T ke y an y time bef ore the end of step 5 . Editing can be canceled provided that it is at tempted bef ore “MD WRITING” is dis- play ed.
41 EN Application section MD edit Press 4 or ¢ key to select “ 3 Q. ERASE?”, then press the SET key again. 3 Press the 4 or ¢ key repeat- edly to select the track number to erased, and press the SET key . Select other trac ks to be erased b y re- peating this step for eac h trac k.
42 EN Canceling editing Editing can be canceled pro vided that it is att empted bef or e "MD WRITING" is dis- play ed. Remote contr ol unit only 1 While the MD is in stop mode, press the MD EDIT key and press 4 or ¢ key to select “TRACK EDIT”, then press the SET key .
Application section 43 EN T imer 7 Setting 1 Press the MENU key . 2 Press the VOLUME/MUL TI CON- TROL keys so that “TIMER SET?” is displayed, then press the SET/ TUNING MODE key . 3 Press the VOLUME/MUL TI CON- TROL keys so that “O.T .T . ON?” is displayed, then press the SET/ TUNING MODE key .
44 EN T o cancel O.T .T . timer : P erform steps 1 to 3 and select “TIMER OFF” and “ O.T .T . ” will disappear . T o check or change the timer setting : Restart the procedure from step 1 again. ÷ B e sure to adjust the time of the day (page 7) before using the timer functions.
Application section 45 EN T imer 2 Press the MENU key . 3 Press the VOLUME/MUL TI CON- TROL keys so that “TIMER SET?” is displayed, then press the SET/ TUNING MODE key . 4 Press the VOLUME/MUL TI CON- TROL keys so that “PROG. ON” is displayed, then press the SET/ TUNING MODE key .
46 EN 9 T o listen to radio broadcasting, press the VOLUME/MUL TI CON- TROL keys to select the preset number of the desired station, then press the SET/TUNING MODE key . This operation is not required when an input source other than “TUNER” is se- lected.
Application section 47 EN T imer T imer recording using program timer The audio of TUNER (r adio) or AUX start ed by the timer pla yback at the set time can be recor ded ont o an MD during timer pla yback. 7 Set ting 1 Make preparation for recording. MD : See steps 1 to 3 in “R ecording CD onto MD” (page 1 6).
48 EN 7 Execution 6 Press the ON/ST ANDBY key (or POWER key on the remote control) to put the unit in the ST ANDBY mode. The S T ANDB Y/TIMER indicator lights in green. When the set ON time comes, the timer program is e xecuted and record- ing starts.
Application section 49 EN T imer Main unit only 1 Press the MENU key . 2 Press the VOLUME/MUL TI CON- TROL keys so that “A.P .S. SET ?” is displayed, then press the SET/TUN- ING MODE key . 3 Press the VOLUME/MUL TI CON- TROL keys to select “ON” (acti- vated) or “OFF” (deactivated), then press the SET/TUNING MODE key .
50 EN Important items Caution on condensation Condensation (of dew) ma y occur inside the unit when there is a great dif f erence in tem- perature betw een this unit and the outside.
51 EN Knowledge section Dust countermeasure The shut ter of the disc cartridge is perma- nently open while the disc is loaded in the set. Theref ore, to pre v ent dust from pen- etrating inside the disc, take the disc out of the unit immediately af ter completion of recording or playbac k.
52 EN Important items(continued) Maintenance of the unit When the front panel or case becomes dirty , wipe with a sof t, dr y cloth. Do not use thin- ner , benzine, alcohol, etc. for these agents may cause discoloration. In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction.
53 EN Knowledge section In case of difficulty What seems to be a malfunction is not alw ays so . Befor e calling f or service, c hec k the follo w- ing table according t o the symptom of y our tr ouble.
54 EN Remote control unit Remote contr ol operation is not possible. R eplace bat teries with new ones. (page 4) If the remote is too f ar awa y from the sy stem or there is an obstacle in bet ween, point the remote to the remote sensor on the main unit.
55 EN Knowledge section CD player section Sound is not produced ev en when the pla y ke y is pr essed. Insert the CD properly . (page 1 0) Clean the disc as described in “Disc handling precautions” . (pages 50 and 51) R emov e condensation as described in “Caution on condensation ” .
56 EN BLANK DISC = No MD data is recorded. BUFFER O VER = An at tempt is made to perf orm high-speed recording of more than 81 trac ks within 7 4 minutes. CAN'T EDIT = An at tempt is made to edit a track whic h is too short. CD LID OPEN = The CD door is open.
57 EN Knowledge section ÷ KENW OOD follows a policy of continuous adv ancements in dev elopment. F or reason specifica- tions may be c hanged without notice. ÷ The full perf ormance may not be e xhibited in an e xtremely cold location (under a water -freezing temperature).
58 EN Figures inside parentheses are ref erence pages. 1 ST ANDB Y/TIMER indicator (59) 2 ON/ST ANDB Y 3 MD insertion slot (1 2) 4 ) EJECT (MD ejection) (1 3) 5 REMO TE (R emote sensor) (4) 6 A UX (1 .
59 EN Knowledge section Standby mode While the standby indicator of the unit is lit, a small amount of current is flo wing into the unit’ s internal circuitr y to bac k up the memor y . This condition is ref erred to as the standby mode of the unit.
60 EN For your records Record the serial number , found on the bac k of the unit, in the spaces designated on the war rant y card, and in the space provided belo w . Ref er to the model and serial numbers whenever y ou call upon y our dealer for information or service on this product.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood MDX-G2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood MDX-G2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood MDX-G2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood MDX-G2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood MDX-G2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood MDX-G2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood MDX-G2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood MDX-G2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
