Manuel d'utilisation / d'entretien du produit KRF-V7070D du fabricant Kenwood
Aller à la page of 48
ESP AÑOL IT ALIANO DEUTSCH FRANÇAIS ENGLISH About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components.
2 EN ENGLISH Units are designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K. .................
3 EN ENGLISH Basic remote control operations for other components ....................................................... 35 Registering setup codes for other components ..................................................... 35 Searching for your code .
4 EN ENGLISH Preparing the remote control Loading the batteries 1 Remove the cover. 2 Insert the batteries. 3 Close the cover. • Insert two AA-size (R6) batteries as indicated by the polarity markings. Operation When the STANDBY indicator is lit, the power turns ON when you press the POWER RCVR key on the remote control.
5 EN ENGLISH Before applying the power Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
6 EN ENGLISH L SL S SB SR CR SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs DSP MODE DTS DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS CS II AB CLIP AUTO DETECT AUTO RDS PTY MEMORY STEREO TUNED SW LFE LOU.
7 EN ENGLISH Names and functions of parts Remote control unit This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s setup codes.
8 EN ENGLISH Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
9 EN ENGLISH Setting up the system Connecting the terminals 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. 1 Strip coating. 2 Push the lever. 3 Insert the cord.
10 EN ENGLISH IN IN REC OUT PLAY IN GND CD/DVD MD/TAPE R L PHONO Connecting audio components Record player Setting up the system To AC wall outlet Cassette deck or MD recorder CD or DVD player SYSTEM CONTROL jacks ^ IN OUT OUT OUT Moving coil (MC) cartridge record player cannot be used directly from the receiver unit.
11 EN ENGLISH PLAY IN PLAY IN PLAY IN REC OUT VIDEO 1 VIDEO 2 VIDEO 3 S VIDEO IN VIDEO VIDEO IN DVD IN MONITOR OUT S VIDEO VIDEO VIDEO OUT OUT VIDEO VIDEO IN IN VIDEO VIDEO IN IN DVD DVD IN IN IN IN V.
12 EN ENGLISH COAXIAL OPTICAL CD/DVD DIGITAL IN DVD/ 6CH VIDEO 2 Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
13 EN ENGLISH VIDEO OUT VIDEO IN VIDEO IN DVD IN IN VIDEO MONITOR OUT VIDEO FRONT SURROUND SUB WOOFER PLAY IN PLAY IN CENTER VIDEO 2 VIDEO 3 DVD/6CH INPUT S VIDEO S VIDEO IN IN VIDEO VIDEO VIDEO VIDEO.
14 EN ENGLISH R SUB WOOFER SURROUND BACK PRE OUT PRE OUT + - CENTER FRONT A R R L SPEAKERS (6-16 ) GREEN WHITE RED ++ - - ++ - - FRONT B R L R L SURROUND BLUE GRAY R Right Front Speakers A Power ampli.
15 EN ENGLISH Connecting the antennas AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AM antenna terminal connections 1 Push lever.
16 EN ENGLISH Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.
17 EN ENGLISH Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the receiver ’ s listening modes, make sure to complete the speaker settings (subwoofer, front, center, and surround speakers) as described below.
18 EN ENGLISH % Press the SETUP key again to return to the main setup displays. • The receiver enters the speaker volume level adjustment mode. • In steps 4 and 5 , indications appear only for the selected channels of the speakers that require adjusting.
19 EN ENGLISH 3 Use the ∧ / ∨ keys or @ / # keys to select the speakers and the MULTI CONTROL knob or Multi ( % / fi ) keys to adjust the distance to the front speakers. The speaker indicator to be adjusted blinks. L SL S SB SR SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ.
20 EN ENGLISH Preparing for playback Some preparatory steps are needed before starting playback. INPUT MODE MD/TAPE A SPEAKERS B ON/STANDBY POWER ON/OFF Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing the POWER ON/OFF and ON/STANDBY key.
21 EN ENGLISH Normal playback Adjusting the sound Loudness Tone Bass Boost TONE VOLUME CONTROL MUTE A SPEAKERS B SPEAKER EQ ACTIVE EQ PHONES LOUDNESS MULTI CONTROL VOL / POWER RCVR Speaker EQ Active EQ Mute (Multi % / fi ) TUNER Adjusting the TONE You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode.
22 EN ENGLISH Normal playback Make sure the SPEAKERS indicators are turned off. SPEAKER EQ mode SPEAKER EQ function is to adjust the receiver’s audio output characteristics with the speakers’ characteristics which differs depending on the size of the speakers.
23 EN ENGLISH Recording audio (analog sources) MD/TAPE Recording a music source 1 Use the Input Selector keys to select the source (other than “ MD/ TAPE ” ) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording.
24 EN ENGLISH Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal.
25 EN ENGLISH Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “ 1 ” . Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
26 EN ENGLISH Listening to radio broadcasts Using the RDS DISP (Display) key TUNER RDS Disp. Pressing the RDS Disp. key changes the contents of the display.
27 EN ENGLISH 3 Press the PTY key to start searching. EXAMPLE : Searching for a Pop Music broadcast. Display while searching. Blinks L SL S SB SR C R SW LFE SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ.
28 EN ENGLISH Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
29 EN ENGLISH Ambience effects Dolby Digital The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources (such as Laserdisc or DVD software marked ).
30 EN ENGLISH Ambience effects DSP mode The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source. These modes are particularly effective when used with stereo program sources, like CD, television, and FM radio.
31 EN ENGLISH Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD software bearing the mark.
32 EN ENGLISH Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
33 EN ENGLISH Ambience effects Midnight mode (Dolby Digital mode only) When watching movies at night , you might not be able to raise the volume as loud as normal.
34 EN ENGLISH Ambience effects CS II Gain adjustment mode (CS II mode only) CS II GAIN allows user to adjust the input gain for the Circle Surround II processing. 1 Press the SOUND key, then press the ∧ / ∨ keys or @ / # keys until “ CS II GAIN ” appears on the display.
35 EN ENGLISH The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Registering setup codes for other components 1 Find the setup code of the component to be registered.
36 EN ENGLISH Basic remote control operations for other components Operating other components This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections.
37 EN ENGLISH Maker Setup codes ABsat 0832, 0123 AST 0321, 0351 Akai 0515 Alba 0455, 0421, 0515, 0613 Aldes 0288 Amstrad 0847, 0252, 0345, 0501, 0675, 0689, 1113 Ankaro 0713, 0288, 0369 Anttron 0421 A.
38 EN ENGLISH Basic remote control operations for other components Setup code chart Maker Setup codes AGB 0516 ASA 0104, 0802 Acura 0009 Admiral 0163 Adyson 0217 Aiwa 0701, 0800 Akai 0208, 0516, 0602,.
39 EN ENGLISH Maker Setup codes Marantz 0037, 0556 Mark 0037 Matsui 0037, 0009, 0217, 0036, 0208, 0011, 0035, 0072, 0177, 0211, 0235, 0272, 0294, 0355, 0371, 0487, 0516 McMichael 0043 Mediator 0037, 0.
40 EN ENGLISH Maker Setup codes Asa 0081 Aiwa 0348, 0352 Akai 0041, 0106, 0315 Alba 0315, 0352 Baird 0104, 0041 Blaupunkt 0195, 0226, 0162, 0034 Brandt 0320, 0321 Brandt Electronic 0041 Bush 0352 Comb.
41 EN ENGLISH Basic remote control operations for other components Setup code chart Maker Setup codes Afreey 0698 Aiwa 0641 Akai 0611 Alba 0717 Amoisonic 0764 Amstrad 0713 Apex Digital 0672 Bush 0516,.
42 EN ENGLISH Basic remote control operations for other components CASSETTE deck, CD player & MD recorder operations You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder equipped with system control operations.
43 EN ENGLISH Basic remote control operations for other components Other components ’ operations Refer to the following for the type of remote control operations available for each component. • When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key.
44 EN ENGLISH Basic remote control operations for other components Satellite operation keys Cable operation keys DVD player operation keys Notes 1. Certain codes may only operate some of the function available on a given model. 2. The above show the typical type functions available for each component.
45 EN ENGLISH In case of difficulty Tuner Cause • No antenna is connected. • The broadcast band is not set properly. • The frequency of the desired station is not tuned. • Noise due to ignition noise from an automobile. • Noise due to interference from an electric appliance.
46 EN ENGLISH Remote control unit Cause • No setup codes registered for the respective input(s). • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote.
47 EN ENGLISH Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without no tice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
48 EN ENGLISH For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KRF-V7070D c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KRF-V7070D - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KRF-V7070D, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KRF-V7070D va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KRF-V7070D, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KRF-V7070D.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KRF-V7070D. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KRF-V7070D ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
