Manuel d'utilisation / d'entretien du produit KDV-5241UY du fabricant Kenwood
Aller à la page of 55
KD V -5241U D VD-RECEIVER INSTR UCTION MANU AL D VD-RECEIVER BEDIENUNGSANLEITUNG RECEPT OR D VD MANU AL DE INSTR UCCIONES D VD-ресивер ИHCTPУKCИЯ ПO ЭKCПЛУA T AЦИИ © B64-4246-08/00 GET0559-001A (E) SI DICHIARA CHE: I Sintolettori CD/DVD Kenwood per auto, modelli KDV -5241U, KDV-5241UY rispondono alle prescrizioni dell'art.
2 | KDV-5241U Contents Before use 3 Playable disc type 7 Preparation 8 Basic operations 9 Basic operations — Remote controller 10 Main elements and features Listening to the radio 12 When an FM ster.
English | 3 Before use 2 W ARNING T o prev ent injury or fire, take the following precautions: • T o prevent a short circuit, never put or leav e any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period.
4 | KDV-5241U Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.
English | 5 Detaching the control panel Avoid touching the connectors. Attaching the control panel Opening and closing the control panel Open... Close.
6 | KDV-5241U “DTS ” and “D TS Digital Out ” are registered trademarks of DTS, Inc. This product incorporates copyright protection technology that is protected by U .
English | 7 Disc type Recording format, file type, etc Playable DVD DVD Video (Region Code: 2) * 1 DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Video: UDF bridge .
8 | KDV-5241U Preparation Cancel the display demonstration and set the clock • See also pages 36 and 37. 1 Turn on the power. 2 Enter the PSM settings. 3 Cancel the display demonstrations Select “Demo”, then “Off”. Set the clock Select “Clock Hr” (hour), then adjust the hour.
English | 9 Basic operations Using the control panel 9 • Volume control [Turn]. • Select the source [Press] . TUNER = DISC * = USB * (or USB-iPod ) * = LINE IN = AV IN = (back to the beginning) p • Select/adjust the sound mode. • Enter the PSM settings [Hold].
10 | KDV-5241U 1 • Turns on the power. • Attenuates the sound if the power is on. • Turns off the power if pressed and held (while the power is on). 2 Selects the source. 3 Selects the FM/AM, and satellite radio bands. 4 Changes the aspect ratio of the playback pictures.
English | 11 p 7 (stop), 3 (play), 8 (pause) • 3 (play) also functions as ZOOM button when pressed with SHIFT button ( ☞ page20). q For advanced disc operations: • 5 / ∞ DVD: Selects the titles.
12 | KDV-5241U 2 3 Local FM stations with the strongest signals are searched and stored automatically in the selected FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Using the number buttons 1 2 When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
English | 13 Listening to the preset station on the Preset Station List 1 Display the Preset Station List, then select the preset station you want to listen to. 2 Change to the selected station. The following features are available only for FM RDS stations.
14 | KDV-5241U 3 Select a PTY code. You can select a PTY code from the 29 preset PTY codes or from the six stored PTY codes. • To store your favorite programme types, see the following. 4 Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.
English | 15 PTY Standby Reception 1 2 3 Select a PTY code. 4 Exit from the setting. either lights up or flashes on the display. • If lights up, the unit temporarily will switch to your favorite PTY programme from any source other than AM. • If flashes, PTY Standby reception is not yet activated.
16 | KDV-5241U To stop play and eject the disc • Press SOURCE to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Disc operations Before performing any operations... Turn on the monitor to watch the playback picture.
English | 17 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) * 3 [Press] Select chapter [Hold] Reverse/fast-forward chapter *.
18 | KDV-5241U After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) Repeat Chapter : Repeat current chapter Repeat Title : Repeat current title .
English | 19 5 Change to the selected item. A If File List is selected The list disappears and playback starts. B If Folder List is selected • If the current folder is selected, File List appears, then repeat steps 4 and 5 A to start playback. • If another folder is selected, playback starts from the 1st file of the selected folder.
20 | KDV-5241U To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/VCD/ MP3/WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode.
English | 21 Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause. (No sound can be heard.
22 | KDV-5241U Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 23). 2 Select an item. 3 Make a selection. If pop-up menu appears.
English | 23 Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
24 | KDV-5241U 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode.
English | 25 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
26 | KDV-5241U Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback by referring to the monitor screen. (See also pages 22 – 25.) • See pages 20 – 25 for operation using the remote controller.
English | 27 On the control panel: 1 2 Enter Dual Zone settings. Activate or deactivate Dual Zone. The source automatically changes to “DISC” when Dual Zone is activated.
28 | KDV-5241U You can connect an Apple iPod using the following cable or adapter: To: Cable or adapter: Connect to: Listen to the music USB 2.0 cable (supplied for the iPod) USB input jack on the con.
English | 29 Continued on the next page Operations using the control screen • These operations are possible on the monitor using the remote controller. • Connect your iPod to the USB input jack on the control panel using the USB cable supplied for your iPod, or KCA-iP240V for watching video file.
30 | KDV-5241U To select a track from Search Mode 1 Enter Search Mode menu. 2 Select a menu item. • Selecting Shuffle Songs starts playback. 3 Select a search mode category, then the desired track.
English | 31 4 Confirm the selection. • You can also change the settings from the PSM (Preferred Setting Mode) items. See “AudioBooks” on page 38.
32 | KDV-5241U Listening to the other external components You can connect an external component to: • AV-IN (video) input jack on the control panel. Preparation: Make sure to connect and turn on the monitor to watch the playback picture.
English | 33 Connecting an external component to the AV-IN input jack AV mini plug cable CA-C3AV (not supplied) AV mini plug cable (supplied) Portable Video/Audio player * Portable Video/ Audio player * or • When the supplied AV mini plug cable and commercially-supplied φ3.
34 | KDV-5241U Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 Enter the setting menu. 2 Select “EQ”. 3 Select “On”. • If “Bypass” is selected, you can listen to the original sound mode recorded.
English | 35 * If “Off” is selected in step 2 , you can only adjust the subwoofer phase. C Hi Pass (Hi Pass Filter) Turn the control dial to select the cutoff frequency to the front/rear speakers. Set this to match the LPF setting. • Off: All signals are sent to the front/rear speakers.
36 | KDV-5241U 4 Adjust the selected PSM item. 5 Repeat steps 2 – 4 to adjust other PSM items if necessary. 6 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 36 – 39. 1 Enter the PSM settings.
English | 37 Category Indication Item ( : Initial) Setting, [reference page] CLOCK Clock Hr Hour adjustment 0 – 23 (1 – 12AM/ 1 – 12PM) : Initial: 0 (0:00AM), [8]. Clock Min Minute adjustment 00 – 59 : Initial: 00 (0:00AM), [8]. 24H/12H Time display mode • 12Hours • 24Hours : See also page 8 for setting.
38 | KDV-5241U Category Indication Item ( : Initial) Setting, [reference page] TUNER AF-Regn‘l Alternative frequency/ regionalization reception • AF • AF REG • Off : When the currently received signals become weak, the unit switches to another station or service (the programme may differ from the one currently received), [15].
English | 39 Setting the time for dimmer • When is shown on the display, you can move back to the previous screen by pressing number button 3. 1 Follow steps 1 to 3 on page 34. • In step 2 , select “DISP”. • In step 3 , select “Dimmer”. 2 Select “Time Set”.
40 | KDV-5241U Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN. 4 Select an option.
English | 41 Continued on the next page Menu Item Setting PICTURE OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) AUDIO DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
42 | KDV-5241U More about this unit FM RDS operations • Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly.
English | 43 Continued on the next page • After ejecting a disc, “No Disc” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
44 | KDV-5241U Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. USB operations • Connecting a USB device automatically changes the source to “USB”.
English | 45 Continued on the next page General settings—PSM • “Auto” setting for “Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “Dimmer” setting to any other than “Auto”.
46 | KDV-5241U About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/ LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
English | 47 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 41).
48 | KDV-5241U Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic OC Occit.
English | 49 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
50 | KDV-5241U Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 7). • Add the extension code <.divx>, <.
English | 51 Continued on the next page Symptom Remedy/Cause USB device • Noise is generated. • The track played back is not a playable file format (MP3/WMA/WAV). Skip to another file. • Do not add the extension code <.mp3>, <.wma>, or <.
52 | KDV-5241U Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
English | 53 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
54 | KDV-5241U DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
B64-4246-08_00_KDV5241U_en.indb 55 B64-4246-08_00_KDV5241U_en.indb 55 08.5.16 1:49:03 PM 08.5.16 1:49:03 PM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDV-5241UY c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDV-5241UY - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDV-5241UY, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDV-5241UY va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDV-5241UY, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDV-5241UY.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDV-5241UY. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDV-5241UY ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
