Manuel d'utilisation / d'entretien du produit RX-7000RBK du fabricant JVC
Aller à la page of 60
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
G-1 W arnings, Cautions and Others/W arnung, Achtung und sonstige Hinweise/ Mises en gar de , précautions et indications diver ses/W aarsc huwing en, v oorzorgen en andere mededelingen/A visos, precauciones y otras notas/ A vver tenz e e precauzioni da osservare IMPORTANT for the U.
G-2 Caution: Proper Ventilation T o avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 10 cm from the sides. T op: No obstructions in 10 cm from the top.
1 English T able of Contents Parts Identification ...................................... 2 Getting Started ........................................... 3 Before Installation ...................................................................... 3 Checking the Supplied Accessories .
2 English Par ts Identification Become familiar with the buttons and controls on the receiver before use. Refer to the pages in parentheses for details.
3 English ANTENNA AM EXT AM LOOP FM 75 COAXIAL AM LOOP ANTENNA AM EXT FM 75 C O A X IA L AM LOOP ANTENNA AM EXT FM 75 C O A X IA L Getting Star ted This section explains how to connect audio/video components and speakers to the receiver , and how to connect the power supply .
4 English Basic connecting procedur e 1 Cut, twist and r emove the insulation at the end of each speaker signal cable (not supplied). 2 T urn the knob counterclockwise .
5 English Connecting the subwoofer speaker Y ou can enhance the bass by connecting a subw oofer . Connect the input jack of a powered subw oofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs (not supplied).
6 English IMPORT ANT: This receiver is equipped with both the composite video and S-video input/output terminals for connecting video components. Y ou do not have to connect both the composite video and S-video terminals.
7 English RIGHT VIDEO VIDEO S-VIDEO RIGHT LEFT A UDIO MONITOR OUT VCR IN (PLA Y) OUT (REC) TV SOUND /DBS DV D DVD player • When you connect the D VD player with stereo output jacks: DVD player Å To.
8 English DIGITAL OUT PCM/DOLBY DIGITAL/MPEG/DTS DVD DIGITAL IN DIGITAL 3 (TV) DIGITAL 2 (CD) DIGITAL 1 (DVD) PCM / DOLBY DIGITAL MPEG/ DTS DBS Digital connections This receiv er is equipped with three DIGIT AL IN terminals — one digital coaxial terminal and two digital optical terminals, and one DIGIT AL OUT terminal.
9 English Connecting the Power Cord Before plugging the receiv er into an A C outlet, make sure that all connections hav e been made. Plug the power cord into an A C outlet. K ee p the power cor d away from the connecting cables and the antenna. The po wer cord may cause noise or screen interference.
10 English Basic Operations The following operations are commonly used when you play any sound source. IMPORT ANT: When using the remote control, check to see if its remote control mode selector is set to the correct position: T o operate this receiver , set it to “AUDIO/TV/ VCR.
11 English Signal and speaker indicators on the display • The signal indicators light up to indicate the incoming channel signals. – Only the indicators for the incoming signals light up.
12 English Listening only with headphones Y ou can listen with the headphones without deacti vating both pairs of speakers; ho wever , if you want to use the HEADPHONE mode (see below), you must turn of f both pairs of speakers. 1. Connect a pair of headphones to the PHONES jack on the front panel .
13 English Basic Settings Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier .
14 English Center Delay T ime Setting Register the delay time of the sound from the center speak er, comparing to that of the sound from the front speakers. If the distance from your listening point to the center speaker is equal to that to the front speakers, select 0 msec.
15 English Crossover Fr equency Setting Small speakers cannot reproduce the bass sound v ery well. So, if you hav e used a small speaker for any of the front, center , or rear channels, this receiv er.
16 English DIGITAL 2 terminal setting DIGITAL 1 terminal setting DIGITAL 3 terminal setting Selecting the Analog or Digital Input Mode When you ha ve connected some digital source components using the.
17 English Fr om the r emote contr ol: 1. Press the source selecting b utton (CD, T APE/MD, TV/DBS, or D VD)* f or which you want to change the input mode. Note: * Among the sources listed abov e, you can select the digital input only for the sources which y ou hav e selected the digital input terminals for .
18 English Storing the Basic Settings and Adjustments — One T ouch Operation JVC’ s One T ouch Operation function is used to assign and store dif ferent sound settings f or each dif ferent playing sour ce. By using this function, you do not hav e to change the settings every time you change the source.
19 English Using Preset T uning Once a station is assigned to a channel number , the station can be quickly tuned. Y ou can preset up to 30 FM and 15 AM (MW/L W) stations. T o store the pr eset stations Bef ore you start, r emember ... • There is a time limit in doing the f ollowing steps.
20 English T o tune in a preset station On the front panel: 1. T urn SOURCE SELECT OR to select the band (FM or AM — MW/L W). The last recei ved station of the selected band is tuned in. 2. Pr ess TUNER PRESET . 3. T urn MUL TI JOG until you f ind the channel y ou want.
21 English Y ou can also sho w the RDS information on the TV screen. T o use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’ s input mode to the proper position to which the recei ver is connected.
22 English PTY codes When an emergency br oadcast (Alarm ! signal) is sent from an FM station: The receiv er automatically tunes in the station except in the follo wing cases: • When y ou are listening to non-RDS stations (all AM — MW/L W and some FM stations).
23 English If there is a station br oadcasting the program you ha ve selected The recei ver changes the source (all sources except AM — MW/L W), and tunes in the station. The indicator of recei ved PTY code starts flashing. When the program is ov er, the r eceiver goes back to the previously selected source, but still remains in EON standby mode.
24 English Using the SEA Modes The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds. IMPORT ANT: When using the remote control, check to see if its remote control mode selector is set to the correct position: T o operate this receiver , set it to “AUDIO/TV/ VCR”.
25 English Using the DSP Modes The built-in Surround Processor provides three types of the DSP (Digital Signal Processor) mode — 3D-PHONIC mode, DAP (Digital Acoustic Processor) mode and Surround mode.
26 English Notes: • The DSP modes ha ve no eff ect on monaural sources. • When y ou select “D VD MUL TI” as the source to play , you cannot select or adjust the DSP modes. • The Ÿ PRO LOGIC indicator lights up when the Dolby Pro Logic decoder built in this receiver is activated.
27 English Available DSP Modes According to the Speaker Ar rangement A vailable DSP modes will v ary depending on how many speak ers ar e used with this receiv er .
28 English 3. Pr ess EFFECT to select an effect level y ou want. • Each time you press the b utton, the effect le vel changes as follows: As the number increases, the selected 3D-PHONIC mode becomes stronger . Adjusting the DAP Modes Once you hav e adjusted the DAP modes, the adjustment is memorized for each D AP mode.
29 English Adjusting the Surr ound Modes Once you hav e adjusted the Surround modes, the adjustment is memorized for each Surround mode. Dolby/DTS/MPEG Surr ound adjustments Bef ore you start, r emember ... • Make sur e that you hav e set the speaker information corr ectly (see page 14).
30 English JVC Theater Surr ound adjustments Bef ore you start, r emember ... • Make sur e tha t you ha ve set the speaker inf ormation correctly (see page 14). • There is a time limit in doing the f ollowing steps. If the setting is canceled before you finish, start from step 1 again.
31 English Activating the DSP Modes Y ou can use only one DSP mode at a time. When a DSP mode is acti vated, another DSP mode is canceled if in use. For Dolby Pro Logic, Dolby Digital, DTS Digital Surr ound and MPEG Multichannel 1. Pr ess SURR OUND ON/OFF so that the lamp on the fr ont panel button lights up.
32 English For the other DSP modes On the front panel: 1. Pr ess DSP MODE repeatedly until the mode y ou want appears on the display . • Eac h time you press the button, the DSP modes change. (See page 27 for more details.) 2. Select and play a sound sour ce.
33 English Fr om the r emote contr ol: 1. Pr ess D VD MUL TI so that “D VD MUL TI” appears on the display . Note: When you select “D VD MUL TI” as the source to play , the DSP mode is canceled temporarily , and the SURROUND ON/OFF and SURROUND MODE b uttons do not work.
34 English Selecting the Source to Play (Also see page 10) 1. Pr ess MENU . The MAIN MENU appears on the TV . • Pressing one of the % / fi / @ / # buttons also displays the MAIN MENU. Notes: • “INPUT” appears only when the digital input (DIGIT AL IN) ter minal setting has been correctly done f or the digital source currently selected.
35 English Adjusting the Front Speaker Output Balance (Also see page 13) 1. Pr ess MENU . The MAIN MENU appears on the TV . • Pressing one of the % / fi / @ / # buttons also displays the MAIN MENU. 2. Pr ess % / fi to move to “SOUND CONTR OL, ” then press @ / # .
36 English 6. Pr ess % / fi to move to the item y ou want to set or adjust, then press @ / # . On this adjustment menu, you can do the following: “CENTER LEVEL”: Adjust the center speaker output le vel. “REAR L LEVEL”: Adjust the left rear speak er output le vel.
37 English 4. Pr ess % / fi to move to “SEA ADJUST . ” The SEA ADJUST menu appears. 5. Pr ess % / fi / @ / # to adjust the SEA mode as y ou want. @ / # : Select the frequency ranges. % / fi : Adjust the frequency le vels. 6. Pr ess SET to store the setting into the SEA USERMODE.
38 English 6. Pr ess % / fi to move to “PRESET NAME, ” then press SET . The character entry screen appears. 7. Pr ess % / fi / @ / # to move in fr ont of a character y ou want.
39 English T o use this remote control system, you need to connect JVC audio components through the COMPU LINK-3 (SYNCHR O) jacks (see belo w) in addition to the connections using cables with RCA pin plugs (see pages 5 and 6). • Mak e sure that the A C power cords of these components are unplugged before connection.
40 English TEXT COMPU LINK Remote Contr ol System The TEXT COMPU LINK remote control system has been newly developed to deal with the disc information recorded in the CD T ext * and MDs. Using these information in the discs, you can operate the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system through the receiver .
41 English On-Screen Operation buttons (on the remote control) 1 Source name: CD or MD 2 Select or , then press SET to change the disc. 3 T rack numbers and track titles. • The current playing (selected) track is indicated in yello w . • W hen you move to a track number , you can change the track information by pressing @ / # .
42 English Sear ch for a disc by its disc title: 1. Pr ess TEXT DISPLA Y while “CD” is selected as the source. The Disc Information screen appears on the TV . 2. Pr ess % / fi to move to “SEARCH, ” then press SET . The DISC SEARCH screen appears.
43 English Sear ch for a disc by its genr e: 1. Pr ess TEXT DISPLA Y while “CD” is selected as the source. The Disc Information screen appears on the TV . 2. Pr ess % / fi to move to “SEARCH, ” then press SET . The DISC SEARCH screen appears.
44 English For the MD recor der: Y ou can write the disc information (disc title and song titles) into the disc. Y ou can only write the song title for the song currently selected.
45 English Operating JVC’ s Audio/V ideo Components Y ou can operate JVC’s audio and video components with this receiver’ s remote control, since control signals for JVC components are preset in the remote control.
46 English Cassette deck After pressing T APE/MD or T APE/MD CONTR OL (with the remote control mode selector set to “ A UDIO/TV/VCR”), you can perform the following operations on a cassette dec k: PLA Y : Starts playing. 1 1 1 1 1 : Fast winds the tape from r ight to left.
47 English RM-SRX7000R REMOTE CONTROL CONTROL CHANNEL VOLUME TV VOL PTY SEARCH DISPLA Y MODE STOP P AUSE FF/ /REW VCR TV/VIDEO T APE/MD MUTING REC PLA Y PTY PTY TV/CA TV/DBS VCR DVD DVD MUIL TI CD T A.
48 English Operating Other Manufacturers’ V ideo Equipment This remote control supplied with the recei ver can transmit control signals for other manufacturers’ VCRs, TVs, CA TV conv erters and DBS tuners.
49 English T o change the transmittable signals for operating a CA TV conver ter or a DBS tuner 1. Set the r emote control mode to “CA TV/DBS. ” 2. Pr ess and hold TV/CA TV/DBS . 3. Pr ess TV/DBS. 4. Enter manufactur er’ s code (three digits) using buttons 1 – 9, and 0.
50 English Expert 206 Ferguson 005, 037, 073, 109, 190, 238, 287, 335, 343 Fidelity 216, 361, 372 Finlandia 208, 346, 359 Finlux 037, 070, 072, 087, 105, 179, 346, 411, 516 Firstline 009, 216, 217, 24.
51 English SEG 036, 076, 217, 264 SEI 087, 102, 177, 213, 294 Sei-Sinudyne 010, 516 Seleco 163, 206, 259, 362, 411 Sentra 035 Sharp 036, 093 Shorai 294 Siarem 087, 102, 213, 516 Siemens 037, 157, 191,.
52 English Beko 189 Best 369 Blaupunkt 173 Boca 243, 513 Brain Wave 332 Bush 067, 522 Cambridge 344, 515 Channel Master 362 CNT 520 Commlink 288 Connexions 396 Conrad 607 Crown 243 Cyrus 200 DDC 362 D.
53 English Pathe Marconi 041 Pentax 042, 105 Perdio 000 Philco 038 Philips 081, 384, 403 Phonola 081 Pioneer 067, 081, 235 Portland 020 Profex 322 Profitronic 240 Proline 000 Pye 081 Quartz 046 Quelle.
54 English T r oubleshooting Use this char t to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC ser vice center . PROBLEM The display does not light up. No sound from speakers. Sound from one speaker only.
55 English Specifications Amplifier Output Po w er At Stereo operation: Front channels: 100 W per channel, min. RMS, both c hannels dri ven into 4 Ω , at 1 kHz with no more than 0.9% total harmonic distortion. (IEC268-3/DIN) At Surround operation: Front channels: 100 W per c hannel, min.
56 English FM tuner (IHF) T uning Range: 87.50 MHz to 108.00 MHz Usable Sensiti vity: Monaural: 17.0 dBf (1.95 µV/75 Ω ) 50 dB Quieting Sensitivity: Monaural: 21.
VICTOR COMP ANY OF JAP AN , LIMITED EN, GE, FR, NL, SP, IT J V C 0400HIMMDWJEIN RX-7000R[E]COVER/f 00.4.25, 0:01 PM 2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC RX-7000RBK c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC RX-7000RBK - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC RX-7000RBK, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC RX-7000RBK va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC RX-7000RBK, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC RX-7000RBK.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC RX-7000RBK. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC RX-7000RBK ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
