Manuel d'utilisation / d'entretien du produit LVT0282-002A du fabricant JVC
Aller à la page of 24
RC - BX25BK RC - BX15BK / BU CD PORTABLE SYSTEM SISTEMA PORTATIL CON CD SISTEMA PORTATILE A CD RC-BX25BK/RC-BX15BK/BU CD PORTABLE SYSTEM MANUAL DE INSTRUCCIONES MANUALE DI ISTRUZIONI INSTRUCTIONS RC-B.
2 ENGLISH Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit. CONTENTS Features ...............................
3 IMPORT ANT FOR LASER PRODUCTS PRECAUTIONS 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the rear cover . There are no user serviceable parts inside the unit; leave all servicing to qualified serv- ice personnel.
4 FEA TURES 1. Portable system incorporating CD player • 16-key remote control unit operates the usual CD functions. (RC-BX25 only) • CD player with repeat play function us- ing the remote control unit.
5 HANDLING PRECAUTIONS Do not use this unit in direct sunlight or leave the unit in closed automobiles (or yachts, etc.) where it would be exposed to high tempera- tures above 40°C. 1. A void installing in the following places. • Where it could be subject to vibrations.
6 8. Cleaning the cabinet If the cabinet gets dirty , wipe it with a soft, dry cloth. Never use benzine or thinner as these could damage the surface finish. 9. When listening with headphones • Do not listen at high volumes as it could damage your hearing.
7 Checking batteries When the tape speed or output sound de- creases, or CD playback is intermittent, replace all batteries with fresh ones. When making an important recording, use new batteries (preferably alkaline batteries with a longer service life) to avoid any possible failure.
NAMES OF P ARTS AND THEIR FUNCTIONS • Front and T op panels 1 BASS BOOST switch _ ON: Set to this position to listen to Bass boost sound. — OFF: Set to this position when Bass boost sound is not required.
y Cassette holder u Cassette operation buttons 8 P AUSE: Press to stop the tape temporarily during playback and recording. § STOP/EJECT : Press to stop the tape. Pressing this button after the tape stops opens the cassette holder . 1 FF: Press to wind the tape forward rapidly .
10 REMOTE CONTROL UNIT (RC-BX25 only) Preparation before use • Installing batteries in the remote control unit 1. Remove the battery cover from the back of the remote control unit. 2. Insert two ‘‘R6/AA (15F)’’ size batteries. • Insert the batteries with the ª and · terminals matching the indication inside the battery compartment.
11 The following operations can be performed using the remote control unit. • Check the functions of the operation buttons carefully and operate them correctly .
12 ACCENSIONE (ON)/MODO DI A TTESA (ST ANDBY) Accensione (ON)/modo di attesa (ST ANDBY) • Accensione (ON): • Commutazione a ST ANDBY : COMPU PLA Y (solo quando viene utilizzata l’alimentazione c.
13 CONCERNING COMP ACT DISCS Since dirty , damaged and warped discs may damage the unit, care should be taken of the following: 1. Usable compact discs Use compact discs with the mark shown. 2. Notes on handling discs • Do not touch the reflective recorded surface.
14 PLA YING COMP ACT DISCS Playing an entire disc ... The following example assumes a compact disc with 10 tunes and a total playing time of 50 minutes 45 seconds. Operate in the order shown 1 Press to open the Disc holder . 2 Load a disc with the label side facing up and close the Disc holder .
15 Search playback (to locate the required position on the disc) • The required position can be located using fast-forward or reverse search while play- ing a disc. • Hold down the button; search play starts slowly and then gradually increases in speed.
16 Direct access playback (using the re- mote control) (RC-BX25 only) • Pressing any of the track number buttons will start play from the beginning of the des- ignated tune, without your having to press the 6 button. 1 Press the 7 (clear) button to set to the CD mode.
17 CASSETTE T APE Cassette tape 1. Loose tape may cause trouble. With a pen- cil, gently tighten the tape as shown. 2. T o prevent recordings from being erased accidentally , remove the tab(s) with a screw- driver . Reseal the slots with adhesive tape to erase and re-record after the tabs have been broken off.
18 RADIO RECEPTION Operate in the order shown 1 Press to set to TUNER mode. 2 Select the band (See page 8). 3 Tune to the required station. 4 Adjust. Using the antennas Note: The built-in ferrite core antenna can pick up in- terference from television receivers in the neighborhood and thereby disturb AM reception.
19 RECORDING • In recording, the ALC circuit automatically optimizes the recording level; adjustment of the recording level is unnecessary . Operate in order shown 1 Select the recording source. • When recording from the radio —Set the TUNER mode • When recording from the CD player —Set the CD mode 2 Load a cassette.
20 Synchronized recording with the CD player • In this system, the CD player starts play- back when deck enters the recording mode. Operate in the order shown 1 Set the (ST ANDBY/ON) button to ON. 2 Load a cassette. 3 Load a disc. 4 Set to CD. 5 Press the ¶ REC button with the T APE (Play) button, synchronized recording will start.
21 BEA T CUT switch When recording an AM broadcast, beats may be produced which are not heard when listen- ing to the broadcast. In such a case, set this switch so that the beats are eliminated.
22 Cleaning the lens If the lens in the CD pickup is dirty , this could degrade sound. Open the disc holder and clean the lens as shown. • Use a blower (available from a camera store) to blow dust off the lens. • If there are fingerprints, etc. on the lens, gently wipe clean with a cotton swab.
23 Note: When the deck is moved from a cold place of around 0°C to a warm place, it may not operate normally , because moisture has formed inside the deck.
VICTOR COMPANY OF JAPAN, LIMITED RC-BX25BK/RC-BX15BK/BU CD PORTABLE SYSTEM Printed in China 0299IMMIDEHIT EN, EP, IT A4-3C 98.12.24.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC LVT0282-002A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC LVT0282-002A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC LVT0282-002A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC LVT0282-002A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC LVT0282-002A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC LVT0282-002A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC LVT0282-002A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC LVT0282-002A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
