Manuel d'utilisation / d'entretien du produit LT-20E50SJ du fabricant JVC
Aller à la page of 63
1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 50 06 07 25 L T -20E50SJ LCD P ANEL TV INSTRUCTIONS ENGLISH D:Aldus Page Maker OnemliIB-NEWJVCAk-452835 (16-9)3D-(AV28-GT20U)COVER PAGE-2835-AK45-1512UK-16-9-(AV-28GT20U)-50053856.
ENGLISH - 1 - Contents Important Instruction .............................. 1 For your safety ......................................... 2 Important Information ............................. 5 Remote Control Buttons .......................... 6 Control Panel Buttons .
ENGLISH - 2 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety .
ENGLISH - 3 - this. Special arrangements may need to be made for infirm or handicapped people. DONT continue to operate the equipment if you are in any doubt about it working normally , or it is damaged in any way switch off, with- draw the mains plug and consult your dealer .
ENGLISH - 4 - W ARNING Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down. The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.
ENGLISH - 5 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; acciden.
ENGLISH - 6 - Remote Control Buttons / I = (S tand By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT -2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button.
ENGLISH - 7 - Control Panel Buttons Main Power button TV/A V button MENU button Program Up/Down buttons V olume Up/Down buttons 01-ENG-2008-17MB08P-1860UK-(LT-20E50SJ)-50060725.
ENGLISH - 8 - Using the stand This TV comes with a T able T op Stand already att ached. This stand can be used to adjust the direction of the TV screen.
ENGLISH - 9 - Installing TV on the wall W ARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV .
ENGLISH - 1 0 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set.
ENGLISH - 1 1 - the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT AN T : Switch off the TV before connect- ing any external device. Sockets for external connections are at the back of the TV .
ENGLISH - 1 2 - Initial Settings You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area.
ENGLISH - 1 3 - download was not performed correctly . Before trying to download again, check that: The VCR power is turned on. The VCR is T -V Link compatible. The VCR is connected to the EXT -2. The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV .
ENGLISH - 1 4 - Programme Selection (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selection (direct access) Press digit buttons on the remote control hand- set to select programmes between 0 and 9.
ENGLISH - 1 5 - By pressing or button you may choose one of these options: Soft , Standard and Bright . Setting Contrast Using or button select Contrast . Press button to increase contrast level. Press button to decrease contrast level.
ENGLISH - 1 6 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once.
ENGLISH - 1 7 - Press or button to change Sound Mode. Y ou can choose Mono , Stereo or Dual (I-II) mode, only if the selected channel sup- ports that Sound Mode. Y ou can also change sound mode directly pressing I-II button on your remote control.
ENGLISH - 1 8 - In EXT mode, Install menu appears like this: Y ou can change only Colour system and VCR. Selecting Programme Using or button select Programme.
ENGLISH - 1 9 - Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P .S (Autostore) function. T o choose a channel in the PROGRAM menu Press / / / button.
ENGLISH - 2 0 - programme names of programmes, you can change them in Programme menu. Source Menu Y ou can switch your TV t o EX T modes by pressing directly to AV button or by selecting in source menu from the main menu. While in EXT mode, you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu.
ENGLISH - 2 1 - selected the time, the TV goes automatically to stand-by mode. Mute Indicator It is placed in the upper middle of the screen when enabled, and it stays there until it is dis- abled.
ENGLISH - 2 2 - PC Mode Installation Power off both Computer and Display before making any connections. Set your PCs resolution correctly before con- necting to the TV . See the table in page 29 for supported modes. Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal.
ENGLISH - 2 3 - PC Picture Menu In the Main menu, select PC Picture using or button, then enter the PC Picture menu pressing / or OK buttons. Contrast , Bright-1 and Colour T emp. adjust- ments in this menu are identical to adjust- ments defined in TV picture menu.
ENGLISH - 2 4 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode.
ENGLISH - 2 5 - T eletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press button to display the selected T eletext page. To exit Teletext Press button. The screen will switch to TV mode.
ENGLISH - 2 6 - If you have a device which outputs component signal, connect it to the EXT-3 terminal with a component video cable. Via the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable.
ENGLISH - 2 7 - 3& $8',2,1 $17 (11$ (;7 $ % & ' ( ) * + , '&9 3&,1387 (;7 (;7 < 3E 3U &RPS RQH QW $X GLR ,Q5.
ENGLISH - 2 8 - Peripheral Equipment Connections &$0&25'(5 DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO 2XWGRRU$ QWHQ QD&RQQHFWLRQV Antenna Connections 01-ENG-2008-17MB08P-1860UK-(LT-20E50SJ)-50060725.
ENGLISH - 2 9 - PC Input T ypical Display Modes The display has a maximum resolution of 1024 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
ENGLISH - 3 0 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abn.
ENGLISH - 3 1 - Specifications Broadcasting Syst ems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) : 46,25 MHz - 168,25 MHz Frequencies VHF (VH) : 175,25 MHz - 463,25 MHz UHF : 471,25 MHz - 863,25 MHz Cable TV : (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 5005 8427 INSTRUCTIONS ENGLISH DEUTSCH FRANÇAIS LCD-TV -GERÄT BEDIENUNGSANLEITUNG P ANNEAU LCD TELEVISEUR MANUEL D'INSTRUCTIONS IT ALIAN.
ENGLISH - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety .
ENGLISH - 2 - IF IN DOUBT PLEASE CONSUL T A COMPE- TENT ELECTRICIAN. DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cl.
ENGLISH - 3 - W ARNING Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down. The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.
ENGLISH - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; acciden.
ENGLISH - 5 - Remote Control Buttons / I = (S tand By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT -2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button.
ENGLISH - 6 - Control Panel Buttons Main Power button TV/A V button MENU button Program Up/Down buttons V olume Up/Down buttons 01-ENG-2008-17MB08P-1860UK-(LT-20E50SU)-50058427.
ENGLISH - 7 - Using the stand This TV comes with a T able T op Stand already att ached. This stand can be used to adjust the direction of the TV screen.
ENGLISH - 8 - Installing TV on the wall W ARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV .
ENGLISH - 9 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set.
ENGLISH - 1 0 - the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT AN T : Switch off the TV before connect- ing any external device. Sockets for external connections are at the back of the TV .
ENGLISH - 1 1 - Initial Settings You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area.
ENGLISH - 1 2 - download was not performed correctly . Before trying to download again, check that: The VCR power is turned on. The VCR is T -V Link compatible. The VCR is connected to the EXT -2. The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV .
ENGLISH - 1 3 - Programme Selection (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selection (direct access) Press digit buttons on the remote control hand- set to select programmes between 0 and 9.
ENGLISH - 1 4 - By pressing or button you may choose one of these options: Soft , Standard and Bright . Setting Contrast Using or button select Contrast . Press button to increase contrast level. Press button to decrease contrast level.
ENGLISH - 1 5 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once.
ENGLISH - 1 6 - Press or button to change Sound Mode. Y ou can choose Mono , Stereo or Dual (I-II) mode, only if the selected channel sup- ports that Sound Mode. Y ou can also change sound mode directly pressing I-II button on your remote control.
ENGLISH - 1 7 - In EXT mode, Install menu appears like this: Y ou can change only Colour system and VCR. Selecting Programme Using or button select Programme.
ENGLISH - 1 8 - Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P .S (Autostore) function. T o choose a channel in the PROGRAM menu Press / / / button.
ENGLISH - 1 9 - programme names of programmes, you can change them in Programme menu. Source Menu Y ou can switch your TV t o EX T modes by pressing directly to AV button or by selecting in source menu from the main menu. While in EXT mode, you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu.
ENGLISH - 2 0 - selected the time, the TV goes automatically to stand-by mode. Mute Indicator It is placed in the upper middle of the screen when enabled, and it stays there until it is dis- abled.
ENGLISH - 2 1 - PC Mode Installation Power off both Computer and Display before making any connections. Set your PCs resolution correctly before con- necting to the TV . See the table in page 28 for supported modes. Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal.
ENGLISH - 2 2 - PC Picture Menu In the Main menu, select PC Picture using or button, then enter the PC Picture menu pressing / or OK buttons. Contrast , Bright-1 and Colour T emp. adjust- ments in this menu are identical to adjust- ments defined in TV picture menu.
ENGLISH - 2 3 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode.
ENGLISH - 2 4 - T eletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press button to display the selected T eletext page. To exit Teletext Press button. The screen will switch to TV mode.
ENGLISH - 2 5 - If you have a device which outputs component signal, connect it to the EXT-3 terminal with a component video cable. Via the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable.
ENGLISH - 2 6 - 3& $8',2,1 $17 (11$ (;7 $ % & ' ( ) * + , '&9 3&,1387 (;7 (;7 < 3E 3U &RPS RQH QW $X GLR ,Q5.
ENGLISH - 2 7 - Peripheral Equipment Connections &$0&25'(5 DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO 2XWGRRU$ QWHQ QD&RQQHFWLRQV Antenna Connections 01-ENG-2008-17MB08P-1860UK-(LT-20E50SU)-50058427.
ENGLISH - 2 8 - PC Input T ypical Display Modes The display has a maximum resolution of 1024 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
ENGLISH - 2 9 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abn.
ENGLISH - 3 0 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) : 46,25 MHz - 168,25 MHz Frequencies VHF (VH) : 175,25 MHz - 463,25 MHz UHF : 471,25 MHz - 863,25 MHz Cable TV : (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC LT-20E50SJ c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC LT-20E50SJ - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC LT-20E50SJ, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC LT-20E50SJ va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC LT-20E50SJ, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC LT-20E50SJ.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC LT-20E50SJ. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC LT-20E50SJ ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
