Manuel d'utilisation / d'entretien du produit GVT0150-008UW du fabricant JVC
Aller à la page of 97
TH-C9 GVT0150-008A [A/UW/US/UN/UG/UX] TH-C6 TH-C3 D VD DIGIT AL CINEMA SYSTEM Consists of XV -THC9, SP-PWC9, SP-THC9F, SP-THC9C and SP-THC9S Consists of XV -T HC6, SP-PWC6, SP-THC6F, SP-THC 6C and SP-THC6S Consists of XV -THC3, SP-PWC3, SP-THC3F, SP-THC3C and SP-THC3S INSTRUCTIONS TH-C3C6C7C9[AUWUSUNUGUX].
G-1 W arnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PR ODUCT 2. CA UT ION : Do not open the top cove r . There are no user serviceable part s inside the unit; lea ve all servic ing to qualifi ed service personnel. 3. CA UT ION : V isible and invisible lase r radiation when open and interlock failed or defeated.
Warnings, Cautions and Others G-2 Caution: Proper Ventilation T o avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surf ace.
1 T able of contents Introduction ............. .............. .......... 2 Notes on handling ............. ............... .............. .............. .........2 Supplied accessories ........ ........................................... .........2 About discs .
2 Introduction 7 Important cautions Installation of the system • Select a pl ace which is le vel, dr y and neither too hot nor too cold; between 5°C and 35°C. • Leav e suff icient distance be tween the system a nd the TV . • Do not use the system in a place su bject to vibration.
3 About discs This system has been designed to play back the following d iscs: • D VD Logo is a trademark of D VD Format/Logo Licensing Corporation. • The Non-D VD side of a “DualDis c” does not comply with the “Compact Disc Digital Audio” st andard.
4 Description of parts and controls Front panel (center unit) Rear panel (center unit) DISC 5 DISC 4 DISC 3 DISC 2 DISC 1 SOURCE TUNING // WMA P L PCM SURR CH FM AM PROGRESSIVE B.S.P . CHAP . TRK PG P L BONUS ST PRG RND DISC ALL MHz kHz MONO MP3 RESUME Display window pg.
Description of parts and controls 5 Powered subwoofer SP-PWC9 SP-PWC6/SP-PWC3 NOTE • For safety reasons, always ensure that ther e is sufficient space behind the powered subwoofer.
Description of parts and controls 6 Remote control Putting batteries in the remote control If the range or effecti ven ess of the remote control decre ases, replace both batteries.
7 Connections 7 AM loop antenna Setting up sup plied AM loop antenn a Connecting AM l oop antenna • T urn the loop antenna un til you ha ve the best reception during AM broadcast program reception. NOTE • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords.
Connections 8 7 The front speakers — TH-C9 For the surround speakers of TH-C 9, see “The surround speake rs — TH-C9”. ( A pg. 10) Before assembling — • Prepare a Phillips scre wdriv er (not supplied). • T ake care not to drop any component part while assembling; otherwise, it may ca use damage to the floor or injury .
Connections 9 7 The front and surroun d speakers — TH-C6 The following procedur e explains the front speak er assembly . The assembly of both the front and surround speakers ar e done in the same manner . Before assembling — • Prepare a Phillips scre wdriv er (not supplied).
Connections 10 7 The surround spea kers — TH-C9 1 2 7 The center sp eaker The follo wing procedure e xplains SP-THC6C assembly . The assembly of other center speake rs is done in the same manner .
Connections 11 CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NO T connect more than one speaker to one speaker terminal.
Connections 12 Note that the illustration bel ow is for SP-PWC6. CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer .
Connections 13 • Place the satellite speakers on a flat and level surface. • The front and center speakers are magnetically shielded to avo id color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay at tention to the following when installing the speakers.
Connections 14 NOTE • The way of connecting the system cord varies depending on the type of the powered subwoofer. Y ou can enjoy the sound of an analog component. NOTE • The signals input to the VIDEO j ack of the VCR IN jacks will be output only from the VIDE O jack of the VIDEO OUT jacks, not from the S-VIDEO jack of the VIDEO OUT jacks.
15 Operating external components with the remote control NOTE • Manufacturers’ codes are subj ect to change without notice. • Set the codes again after replacing th e batteries of the remote control. 7 To set the manufact urer’s code Y ou can operate a JVC TV without setting the manuf acturer’ s code.
Operating external components with the remote control 16 5 Press number buttons (1 -9, 0) to enter the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0 , the n 1 . For a Son y product: Press 2 , the n 0 . 6 Release F VCR/DBS.
17 Basic operations IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . On the remote control: Press AUDIO. On the center unit: Press . When D VD is selected as the so urce ( A pg.
Basic operations 18 On the remote contro l: Press one of the source selecting buttons (DVD, FM/AM, VCR or DBS). DV D : T o play back a disc (DVD VIDEO, VCD etc.). ( A pg. 21) FM/AM : T o tune in an FM or AM station. ( A pg. 41 ) Each time you press the butt on, the band alternates between FM and AM.
Basic operations 19 The system turns of f automatically when the specif ied period of time has passed. Press SLEEP. Each time you press the button, the shut-of f time changes. Example: To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP r epeatedly .
Basic operations 20 NOTE • When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again. 7 While DVD is selected as the source and stopped 1 Take your position where you listen to the sound.
21 Playback • The icon such as sho ws the disc formats or f ile types the operation is av ailable for . IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO . 2P r e s s DV D . 1 Press the desired DISC (1-5) 0 on the center unit.
Playback 22 NOTE • Up to 5 discs can be loaded. • You can also start playback by pressing 3 (play button) or DVD . • The system plays back available discs sequentially until you stop playback or until the disc loaded on the DISC 5 tray reaches to the end.
Playback 23 DVD VR disc Example: During playback on the Original program* Example: During playback on the Playlist* * Pressing T OP MENU/PG or MENU/PL , you can change the play mode ( A pg. 25) NOTE • You can change the time inform ation mode (except for MP3/WMA/ JPEG).
Playback 24 7 Using x / 4 buttons 7 For DVD VIDEO/DVD VR (chapter): During playback For VCD/SVCD (track): During playback wi thout PBC function For DVD AUDIO/CD/MP3/WMA/JPEG (track/file): During playback or while stopped Press x or 4 repeatedly. NOTE • When playing back an MP3/JPEG file, you can make operations using the file control display.
Playback 25 7 During playback or while stopped. 1 Press TOP MENU/PG or MENU/PL. The control display is show n on the TV screen, and the system starts playback of the f irst title/playlist . • The PLA Y LIST is shown only when the playlist is on the D VD VR disc.
26 Advanced operations • The icon such as shows the disc formats or f ile types the operation is av ailable for . IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . • There are exceptions in the operation mentioned above.
Advanced operations 27 7 All Channel Stereo (DSP) All Channel S tereo (ALL ST) mode can reprodu ce a lar ger stereo sound fi eld using all the connect ed (and acti v ated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.
Advanced operations 28 7 Contents of the on-scree n bar during playback DVD VIDEO DVD AUDIO VCD SVCD CD DVD VR disc A Shows disc type. B Show s audio information. C Shows disc number . D Shows current title (for D VD VIDEO), group (for D VD A UDIO) number or play mode (for DVD VR).
Advanced operations 29 Y ou can start playing a title, chapter or track you specify . Y ou can also play a disc from specif ied time. Locating a desired sc ene from the DVD menu D VD VIDEOs generally ha ve their o wn menus which show disc contents and you can di splay them on the TV screen.
Advanced operations 30 Locating a desired po sition by specifying the time 7 For DVD VIDEO/DVD AUDIO/DVD VR: During playback For VCD/SVCD: While stopped or during playback without PBC function For CD:.
Advanced operations 31 When Resume Playback is set to “ON” ( A pg. 40) and you stop playback by the follo wing operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window .) • T urning off the po wer ( A pg.
Advanced operations 32 7 During playback of a di sc containing audio in several languages When using the AUDIO button: 1 Press AUDIO. Example (DVD VIDEO): “ENGLISH” is selected out of 3 audio languages recorded. 2 Press AUDIO repeatedly or press Cursor Y / 5 to select the desired audio.
Advanced operations 33 Selecting browsable still picture recorded on DVD AUDIO Most D VD A UDIOs include browsable still pictures (B.S.P .), which usually appear b y turns automatically during playback according to the playback sequence.
Advanced operations 34 4 Press ENTER. Example: 5 Press Cursor Y / 5 to change the setting. 6 Press ENTER. The current VFP settings appe ar again. 7 Repeat steps 3 to 6 to adjust other parameters. 8 Press VFP. NOTE • Although the setting display di sappears in th e middle of the procedure, the setting at that time will be stored.
Advanced operations 35 Y ou can play titles or tracks on a disc in random order . 7 While stopped 1 Press PLAY MODE repeatedly until appears on the TV screen. 2 Press 3 (play button). • When more than one discs ar e loaded, the syst em starts Random Playback of the ne xt disc after completing current disc playback.
Advanced operations 36 Repeating a desired part [A-B Repeat] Y ou can repeat playback of a d esired part by specifying the be ginning (point A) and ending (point B). 7 During playback 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen.
Advanced operations 37 IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . NOTE Before you start operation; • There is a time limit when doing th e following steps. If the setting is cancelled before you finish, start from step 1 again.
38 Setting DVD preferences • Y ou can change the language us ed in the setup menus. See “Menu description” below . Basic operation on the setup menus IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO .
Setting DVD preferences 39 : P icture menu (PICTURE) 7 MONIT OR TYPE Y ou can select the monitor type to match y our TV when you play D VDs recorded in the picture’ s height/width ratio of 16:9. • 16:9/16:9 MUL TI (Wide television co n versio n) Select this when the aspect ratio of your TV is f ixed on 16:9 (wide TV).
Setting DVD preferences 40 : Speaker setting menu (SPK. SETTING) 7 Level menu (LEVEL) FRONT LEFT SPEAKER/FR ONT RIGHT SPEAKER/ CENTER SPEAKER/SURROUND RIGHT SPEAKER/ SURROUND LEFT SPEAKER While monitoring the test tone, adj ust the output le vels of the speaker s.
41 T uner operations IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO . 2P r e s s FM /AM . NOTE • W h e n F M o r A M i s s e l e c t e d a s t h e source, you can select All Channel Stereo (ALL ST) and SURR OFF mode.
T uner operations 42 Once a station i s assigned to a ch annel number , the station can be quickly tuned in. Y ou can pres et 30 FM and 15 AM stations. 7 To preset the stations 1 Tune in the station you want to preset. • If you want to store the FM reception mode for an FM station, select the reception mode you want.
43 References 7 Handling Discs • Remov e the disc from its case b y holding it at the edge while pressing the center hole lightly . • Do not touch the shiny surface o f the disc or bend the disc. • Put the disc back in its case after use to prev ent warping.
References 44 7 Center unit (XV-THC9/XV-THC6/XV-THC3) Audio section T otal Harmonic Di stortion 0.02 % NOTE: This value is measured at System cord CONNE CTOR for reference.
References 45 7 Satellite Speakers — SP-XTHC9 Front speakers (SP-THC9F) Speaker unit: W oofer: 10.0 cm M 2 Midrange: 10.0 cm M 2 Tw e e t e r : 4 c m Bass-reflex, Magne tically Shielded Power Handling Capacity: 140 W Impedance: 4 C Frequency Range: 60 Hz to 20 kHz Dimensions (W M H M D): 270 mm M 1 085.
EN 0405TMMMD WJEM © 2005 Victor Company of Japan, Limited TH-C9/TH-C6/ TH-C3 D VD DIGIT AL CINEMA SYSTEM Mains (AC) Line Instruction (not applicable for Australia) CAUTION for mains (AC) line BEFORE .
GVT0150-009A [UJ] TH-C6 TH-C3 D VD DIGIT AL THEA TER SYSTEM Consists of XV -THC6, SP-PWC6, SP-THC6F, SP-THC6C and SP-THC6S Consists of XV -T HC3, SP-PWC3, SP-THC3F, SP-THC 3C and SP-THC3S INSTRUCTIONS TH-C3C6[UJ].
G-1 W arnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PR ODUCT 2. CA UTION : Do not open the top cover . There are no user serviceable part s inside the unit; lea ve all servic ing to qualifi ed service personnel. 3. CA UTION : V isible and invisible lase r radiation when open and interlock failed or defeated.
Warnings, Cautions and Others G-2 Caution: Proper Ventilation T o avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surf ace.
1 T able of contents Introduction ............. .............. .......... 2 Notes on handling ............. ............... .............. .............. .........2 Supplied accessories ........ ........................................... .........2 About discs .
2 Introduction 7 Important cautions Installation of the system • Select a pl ace which is le vel, dr y and neither too hot nor too cold; between 5°C and 35°C. • Leav e suff icient distance be tween the system a nd the TV . • Do not use the system in a place su bject to vibration.
3 About discs This system has been designed to play back the following d iscs: • D VD Logo is a trademark of D VD Format/Logo Licensing Corporation. • The Non-D VD side of a “DualDis c” does not comply with the “Compact Disc Digital Audio” st andard.
4 Description of parts and controls Front panel (center unit) Rear panel (center unit) DISC 5 DISC 4 DISC 3 DISC 2 DISC 1 SOURCE TUNING // WMA P L PCM SURR CH FM AM PROGRESSIVE B.S.P . CHAP . TRK PG P L BONUS ST PRG RND DISC ALL MHz kHz MONO MP3 RESUME Display window pg.
Description of parts and controls 5 Powered subwoofer SP-PWC6/SP-PWC3 NOTE • For safety reasons, always ensure that ther e is sufficient space behind the powered subwoofer.
Description of parts and controls 6 Remote control Putting batteries in the remote control If the range or effecti ven ess of the remote control decre ases, replace both batteries.
7 Connections 7 AM loop antenna Setting up sup plied AM loop antenn a Connecting AM l oop antenna • T urn the loop antenna un til you ha ve the best reception during AM broadcast program reception. NOTE • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords.
Connections 8 7 The front and surroun d speakers — TH-C6 The following procedur e explains the front speak er assembly . The assembly of both the front and surround speakers ar e done in the same manner . Before assembling — • Prepare a Phillips scre wdriv er (not supplied).
Connections 9 When installing th e front and surround speakers on the wall; • Attach the supp lied bottom co ver on the bottom of each speak ers as illustrated.
Connections 10 Note that the illustration bel ow is for SP-PWC6. CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer .
Connections 11 • Place the satellite speakers on a flat and level surface. • The front and center speakers are magnetically shielded to avo id color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay at tention to the following when installing the speakers.
Connections 12 NOTE • The way of connecting the system cord varies depending on the type of the powered subwoofer. Y ou can enjoy the sound of an analog component. NOTE • The signals input to the VIDEO j ack of the VCR IN jacks will be output only from the VIDE O jack of the VIDEO OUT jacks, not from the S-VIDEO jack of the VIDEO OUT jacks.
Operating external components with the remote control 13 Operating external components with the remote control NOTE • Manufacturers’ codes are subj ect to change without notice. • Set the codes again after replacing th e batteries of the remote control.
Operating external components with the remote control 14 5 Press number buttons (1 -9, 0) to enter the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0 , the n 1 . For a Son y product: Press 2 , the n 0 . 6 Release F VCR/DBS.
15 Basic operations IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . On the remote control: Press AUDIO. On the center unit: Press . When D VD is selected as the so urce ( A pg.
Basic operations 16 On the remote contro l: Press one of the source selecting buttons (DVD, FM/AM, VCR or DBS). DV D : T o play back a disc (DVD VIDEO, VCD etc.). ( A p g. 19) FM/AM : T o tune in an FM or AM station. ( A pg. 39 ) Each time you press the butt on, the band alternates between FM and AM.
Basic operations 17 The system turns of f automatically when the specif ied period of time has passed. Press SLEEP. Each time you press the button, the shut-of f time changes. Example: To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP r epeatedly .
Basic operations 18 NOTE • When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again. 7 While DVD is selected as the source and stopped 1 Take your position where you listen to the sound.
19 Playback • The icon such as shows the disc formats or f ile types the operation is av ailable for . IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO . 2P r e s s DV D . 1 Press the desired DISC (1-5) 0 on the center unit.
Playback 20 NOTE • Up to 5 discs can be loaded. • You can also start playback by pressing 3 (play button) or DVD . • The system plays back available discs sequentially until you stop playback or until the disc loaded on the DISC 5 tray reaches to the end.
Playback 21 DVD VR disc Example: During playback on the Original program* Example: During playback on the Playlist* * Pressing T OP MENU/PG or MENU/PL , you can change the play mode ( A pg. 23) NOTE • You can change the time inform ation mode (except for MP3/WMA/ JPEG).
Playback 22 7 Using x / 4 buttons 7 For DVD VIDEO/DVD VR (chapter): During playback For VCD/SVCD (track): During playback wi thout PBC function For DVD AUDIO/CD/MP3/WMA/JPEG (track/file): During playback or while stopped Press x or 4 repeatedly. NOTE • When playing back an MP3/JPEG file, you can make operations using the file control display.
Playback 23 7 During playback or while stopped. 1 Press TOP MENU/PG or MENU/PL. The control display is show n on the TV screen, and the system starts playback of the f irst title/playlist . • The PLA Y LIST is shown only when the playlist is on the D VD VR disc.
24 Advanced operations • The icon such as shows the disc formats or f ile types the operation is av ailable for . IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . • There are exceptions in the operation mentioned above.
Advanced operations 25 7 All Channel Stereo (DSP) All Channel S tereo (ALL ST) mode can reprodu ce a lar ger stereo sound fi eld using all the connect ed (and acti v ated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.
Advanced operations 26 7 Contents of the on-scree n bar during playback DVD VIDEO DVD AUDIO VCD SVCD CD DVD VR disc A Shows disc type. B Show s audio information. C Shows disc number . D Shows current title (for D VD VIDEO), group (for D VD A UDIO) number or play mode (for DVD VR).
Advanced operations 27 Y ou can start playing a title, chapter or track you specify . Y ou can also play a disc from specif ied time. Locating a desired sc ene from the DVD menu D VD VIDEOs generally ha ve their o wn menus which show disc contents and you can di splay them on the TV screen.
Advanced operations 28 Locating a desired po sition by specifying the time 7 For DVD VIDEO/DVD AUDIO/DVD VR: During playback For VCD/SVCD: While stopped or during playback without PBC function For CD:.
Advanced operations 29 When Resume Playback is set to “ON” ( A pg. 38) and you stop playback by the follo wing operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window .) • T urning off the po wer ( A pg.
Advanced operations 30 7 During playback of a di sc containing audio in several languages When using the AUDIO button: 1 Press AUDIO. Example (DVD VIDEO): “ENGLISH” is selected out of 3 audio languages recorded. 2 Press AUDIO repeatedly or press Cursor Y / 5 to select the desired audio.
Advanced operations 31 Selecting browsable still picture recorded on DVD AUDIO Most D VD A UDIOs include browsable still pictures (B.S.P .), which usually appear b y turns automatically during playback according to the playback sequence.
Advanced operations 32 4 Press ENTER. Example: 5 Press Cursor Y / 5 to change the setting. 6 Press ENTER. The current VFP settings appe ar again. 7 Repeat steps 3 to 6 to adjust other parameters. 8 Press VFP. NOTE • Although the setting display di sappears in th e middle of the procedure, the setting at that time will be stored.
Advanced operations 33 Y ou can play titles or tracks on a disc in random order . 7 While stopped 1 Press PLAY MODE repeatedly until appears on the TV screen. 2 Press 3 (play button). • When more than one discs ar e loaded, the syst em starts Random Playback of the ne xt disc after completing current disc playback.
Advanced operations 34 Repeating a desired part [A-B Repeat] Y ou can repeat playback of a d esired part by specifying the be ginning (point A) and ending (point B). 7 During playback 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen.
Advanced operations 35 IMPORTANT Before using the remote control for the following operation; • Set the remote co ntrol mode selector to A UDIO . NOTE Before you start operation; • There is a time limit when doing th e following steps. If the setting is cancelled before you finish, start from step 1 again.
36 Setting DVD preferences • Y ou can change the language us ed in the setup menus. See “Menu description” below . Basic operation on the setup menus IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO .
Setting DVD preferences 37 : P icture menu (PICTURE) 7 MONIT OR TYPE Y ou can select the monitor type to match y our TV when you play D VDs recorded in the picture’ s height/width ratio of 16:9. • 16:9/16:9 MUL TI (Wide television co n versio n) Select this when the aspect ratio of your TV is f ixed on 16:9 (wide TV).
Setting DVD preferences 38 : Speaker setting menu (SPK. SETTING) 7 Level menu (LEVEL) FRONT LEFT SPEAKER/FR ONT RIGHT SPEAKER/ CENTER SPEAKER/SURROUND RIGHT SPEAKER/ SURROUND LEFT SPEAKER While monitoring the test tone, adj ust the output le vels of the speaker s.
39 T uner operations IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode selector to A UDIO . 2P r e s s FM /AM . NOTE • W h e n F M o r A M i s s e l e c t e d a s t h e source, you can select All Channel Stereo (ALL ST) and SURR OFF mode.
T uner operations 40 Once a station i s assigned to a ch annel number , the station can be quickly tuned in. Y ou can pres et 30 FM and 15 AM stations. 7 To preset the stations 1 Tune in the station you want to preset. • If you want to store the FM reception mode for an FM station, select the reception mode you want.
41 A V COMPU LINK remote control system The A V COMPU LINK remote control system allo ws you to operate JVC TVs and VCRs through the ce nter unit. This system is equipped with the A V COMPU LINK-III, which adds a function to operate JVC’ s video componen ts via the video components terminals.
42 References 7 Handling Discs • Remov e the disc from its case b y holding it at the edge while pressing the center hole lightly . • Do not touch the shiny surface o f the disc or bend the disc. • Put the disc back in its case after use to prev ent warping.
References 43 7 Center unit (XV-THC6/XV-THC3) Audio section T otal Harmonic Di stortion 0.02 % NOTE: This value is measured at System cord CONNE CTOR for reference.
References 44 7 Satellite Speakers — SP-XTHC6 Front speakers (SP-THC6F) Speaker unit: 5.5 cm M 2 1.5 cm Bass-reflex, Magne tically Shielded Power Handling Capacity: 170 W Impedance: 3 C Frequency Range: 90 Hz to 20 kHz Dimensions (W M H M D): 250 mm M 1 104 mm M 250 mm Mass: 2.
EN 0405TMMMD WJEM © 2005 Victor Company of Japan, Limited TH-C6/TH-C3 D VD DIGI T AL THEA TER SYSTEM Mains (AC) Line Instruction CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mai.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC GVT0150-008UW c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC GVT0150-008UW - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC GVT0150-008UW, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC GVT0150-008UW va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC GVT0150-008UW, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC GVT0150-008UW.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC GVT0150-008UW. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC GVT0150-008UW ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.