Manuel d'utilisation / d'entretien du produit DR-MV2 du fabricant JVC
Aller à la page of 76
STANDBY/ON VCR DUBBING PR VCR/DVD S-VIDEO VIDEO (MONO) L - AUDI O - R DVD VCR DVD DUBBING VCR SEARCH VCR SYSTEM VCR SLOW VCR REC EJECT OPEN/ CLOSE SET UP STANDBY/ON REPEAT ZOOM PR RETURN MENU/LIST TOP MENU CLEAR AUDIO PLAY SLOW SLOW PAU S E DVD REC STOP TIMER PROG ON SCREEN ABC .
2 Before Y ou Start EN • Remote control with two R6 (AA) batteries • RF cable • Scart cable • Instruction Manual IMPORT ANT Please read the various precautions on pages 2 to 4 before installing or operating the unit. Precautions Laser Safety This unit employs a laser .
3 Before Y ou Start EN 7. Do not stand the unit vertically . Use the unit in a horizontal (flat) position only . 8. Before attempting to operate the unit, make sure that the timer recording mode is off. 9. This product is in Stand-by mode when turned of f while the mains cable is connected.
4 Before Y ou Start EN About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
5 EN T able of Contents Before You Start ............... .................... .. 2 Precautions ........................................................... 2 Features ................................................................ 6 Guide to the Instruction Manual .
6 Before Y ou Start EN Features This unit not only plays back DVDs, CDs and VHS tapes but also offers features for you to record to DVD discs and edit them after that.
7 Before Y ou Start EN Guide to the Instruction Manual Symbols Used in the Instruct ion Manual T o show what recording mode or disc type applies to each function, the following symbols appear at the beginning of each operating item. * There may be a disc which cannot be u sed or played back.
8 Before Y ou Start EN Functional Overview Front Panel 1 ST ANDBY/ON /I button • Press to turn on or off the unit. * “ ” shows electrical power standby and “ I ” shows ON. 2 Cassette compartment (VCR ) • Insert a tape here. 3 Disc tray OPEN/CLOSE O button * (DVD) • Press to open or close the disc tray .
9 Before Y ou Start EN Rear Panel 1 Mains cable • Connect to a standard AC outlet. 2 A V2 (DECODER) (DVD/VCR) • Connect to VCR, camcorder , or other Audio- Video equipment. Use a commercially available Scart cable. 3 A V1 (TV) (DVD/VCR) • Connect to the Scart jack on your TV .
10 Before Y ou Start EN Remote Control * Y ou can also turn on the unit by pressing these buttons when the remote control is in DVD mode. 1 OPEN/CLOSE/EJECT O button* (DVD/ VCR) • Press to open or close the disc tray . • Press to remove the tape from the unit.
11 Before Y ou Start EN 19 REPEA T button (DVD) • Press to select the repeat mode. 20 ZOOM button (DVD) • During playback, press to enlarge the pictur e on the screen. 21 PR(OGRAMME) +/ - buttons (DVD/VCR) DVD mode • Press to change the cha nnel up or down.
12 Before Y ou Start EN Installing Batteries in the Remote Control Install two R6 (AA) batteries (supplied) into the remote control, carefully match with the polarity indicated inside the battery compartment. Caution • Incorrect use of batteries can result in hazar ds such as leakage and bursting.
13 Before Y ou Start EN Guide to On-Screen Displays Display Menu Press [DVD] first. With a disc inserted into the unit, press [ON SCREEN] to display the On-Screen display . The menu shows information about what is recorded on the disc. This is an example screen for explanation.
14 Before Y ou Start EN Setting Menus Press [SET UP] in stop mode to displa y “Easy Setting Menu” or “Advanced Setting Menu.” Choose either “Easy Setting Menu” or “Advanced Setting Menu” using [Cursor U / D ] , then press [ENTER] to change between the menus.
15 Before Y ou Start EN CD, MP3, JPEG & Video CD This is an example scre en for explanation. Some items will be displayed in gr ey depending on the inserted disc. 1 Title List / Playlist / Original: Display the titles recorded on the disc. 2 Format (DVD-RW only): Erase all of the recorded content on the disc.
16 Before Y ou Start EN Front Panel Display Guide 1 Current st atus of the unit p : Appears when a disc or a tape playback is paused. Appears also during step by step playback. P : Appe ars when playing back a disc or a tape. p P : Appears during slow forward or slow reverse playback.
17 Getting Started EN Connections Connecting to a TV Connect the unit to a TV after considering the capabilities of your existing equipment. Before installation, plug off your TV and this unit. Using the Scart jack 1 Conne ct the antenna o r cable to the ANTENNA IN jack of this unit.
18 Getting Started EN Recording from a camcorder or other Audio-Video equipment with no Scart output jack (A V3) If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable. Change the setup when using S-VIDEO input jack.
19 Getting Started EN Selecting the On-Screen Display (OSD) Language 1 In stop mode, pre ss [SET UP]. 2 If yo u select “Advanced Setting Menu,” proceed to step 3. If you select “Easy Settin g Menu,” proceed to step 4. 3 Select “Dis play” using [Cursor U / D ], then press [ENTER].
20 Getting Started EN Manual T uning Manually tune each channel. 1 In stop mode, pre ss [SET UP]. “Easy Setting Menu” or “Advanced Setting Menu” will appear . 2 Select “Ch annel” using [Cursor U / D ], then press [ENTER]. 3 Select “Man ual T uning” using [Cursor U / D ], then press [ENTER].
21 Getting Started EN Move Y ou can replace two channels. 1 In stop mode, pre ss [SET UP]. 2 Selec t “Advanced Settin g Menu” using [Cursor U / D ], then press [ENTER]. If it has already appeared, proceed to step 3. 3 Select “Ch annel” using [Cursor U / D ], then p ress [ENT ER].
22 Getting Started EN Manual Clock Setting 1 In stop mode, pre ss [SET UP]. “Easy Setting Menu” or “Advanced Setting Menu” will appear . 2 Select “Cloc k” using [Cursor U / D ], then press [ENTER]. 3 If yo u select “Advanced Setting Menu,” proceed to step 4.
23 Recording EN Information on DVD Recording Ty p e o f D i s c s This unit can record on DVD-R and D VD-RW . Y ou can record on DVD-R only once. On DVD-RW , you can record and erase many times. It is possible to record on DVD-R only in Video mode. DVD-RW can record in the format you select from Video mode or VR mode.
24 Recording EN Information on Copy Control Some satellite broadcasts include copy-protected information. If you wish to record them, refer to the following.
25 Recording EN Formatting a Disc Choosing the Record ing Format of a Blank DVD-RW Disc When inserting a blank disc, the unit au tomatically starts to initialise the disc. Y ou can also manually format a DVD-RW disc once it has been used. After formatting, you can record on the disc with the recording format selected in the Setting menu.
26 Recording EN Reformatting a Disc Manually If you are using a DVD-RW disc, you can format the disc by performing “Format.” By default it will be in Video mode. Y ou can change this to VR mode u sing the Setting menu. Note • When you reformat the disc, the contents of the disc are erased.
27 Recording EN 5 Select “S tereo” or “Bilingual” using [Cursor U / D ], then press [ENTER]. 6 Press [ SET UP] to exit. Hint • If you select “S tereo”: The audio will be recorded as “stereo audio .” • If you select “ Bilingual”: The audio will be recor ded as “bilingual audio” (see next section for more detail).
28 Recording EN Checking the Recording Picture and Sound Quality Before recording on a DVD, you can confirm the quality of the picture and sound with the recording speed you selected. 1 Make sure that the unit is in ST OP or REC mode and a DVD is inserted correctly .
29 Recording EN Timer Recording Y ou can set the unit to record up to 8 programmes, up to a month in advance. Daily or weekly programme recordings are also available. • Be sure to set the clock be fore entering a timer programming. • Y ou can select the timer programming list by pressing [PROG] twice.
30 Recording EN • Cancel the timer-standby mode by pressing [TIMER ] before operation for either DVD or VCR. When finished operating, press [TIMER ] to resume the timer-standby mode.
31 Recording EN E41: Power failure E42: No disc The error programme will be d eleted once you check the error in the programme list, or once you cancel the timer-standby mode and re-enter it.
32 Recording EN 5 Select the record ing media (“DVD” or “VCR”) using [Cursor U / D ], then press [Curso r P ]. 6 Select a re cording speed using [Cursor U / D ], then press [Cursor P ]. 7 Select VPS / PDC “ON” or “OFF” using [Cursor U / D ], then press [ENTER].
33 Recording EN If programming has been mad e at the end of the programming (PROG . 1) currently being reco rded: • The timer programming set fir st (PROG . 2) has priority . PROG . 3 will not be recorded. If the recording time is partially overlapped: • The timer programming with the ear lier start time (PROG .
34 Recording EN Recording from Ex ternal Equipment Before recording from external equipme nt, see page 17 for connection instructions. 1 T urn the TV and the unit on, and select the input of the TV to which the unit is connected. 2 When you want to record to the disc: Press [DVD].
35 Recording EN 9 Press [VCR PLA Y P ] on the unit, and then press [P AUSE p ] at the point you wish to st art recording. 10 Press [DUBBING]. VCR to DVD duplication will start.
36 Recording EN Finalising Discs Y ou will need to finalise dis cs to play them back in other players. Finalising may take from several minutes up to an hour . (A disc recorded in Video mode can take up to 15 minutes. A disc recorded in VR mode can take up to 60 minutes.
37 Playing Back Discs EN Information on Playing Back DVDs Read the following information before you play back a DVD. Playable Discs Y ou can play back all the discs listed on the right. Before attempting to play back a DVD, make sure it meets the requirements for Region Codes and Colour Systems as described in this section.
38 Playing Back Discs EN Basic Playback Hint for DVD Playback The contents of a DVD are generally divided into titles. T itles are sometimes further subdivided into chapters. Playing Back a DVD-RW / DVD-R / DVD+RW / DVD+R Disc 1 Press [ST AN DBY/ON /I] t o turn on the unit.
39 Playing Back Discs EN 2 Press [ Cursor U / D ] to sel ect the desired folder (grou p ) or file (track), then press [ENTER]. If a file is selected: Playback will start. If a folder is selected: The files in the folder will appear . Press [Cursor U / D ] to select the track or folder you want, then press [ENTER] .
40 Playing Back Discs EN Playing Back a Disc Using the Title Menu Some DVDs have a title menu, which lists the titles available on the DVD. Y ou can start playing back such discs at a specific title. Press [DVD] first. 1 Press [TOP MENU]. The title menu will appear .
41 Playing Back Discs EN Cancelling and Re calling the PBC Function Insert a Video CD. 1 In stop mode, pre ss [SET UP]. “Easy Setting Menu” or “Advanced Setting Menu” will appear . 2 Select “CD Pla yback Mode” using [Cursor U / D ], then press [ENTER].
42 Playing Back Discs EN Hint • Forward / reverse speeds are indicated with icons as follows. Forward (Approx. Speed): x1.5: x20: x40: Reverse (Approx. S peed): x5: x20: x40: Skipping TV Commercials During Playback T o enjoy recorded programmes without any interruptions, press [] .
43 Playing Back Discs EN Zoom 1 During playbac k, press [ZOOM]. Four options are available, x1.0, x1.2, x1.5 and x2.0. These are displayed excluding the current zoom rate. Hint • Y ou can also select the zoom function b y pressing [ON SCREEN] . In this case, press [ON SCREEN] first, select the icon using [Cursor L / P ] , and then press [ENTER] .
44 Playing Back Discs EN Search Title / Chapter Search Using [ B / F ] buttons 1 During playbac k, press [ F ] to ski p the current title or cha pter and move to the next. The unit moves to the next title or chapter one after the other . T o go back to the previous title or chapte r , press [ B ] repeatedly .
45 Playing Back Discs EN Time Search 1 During playbac k, press [ON SCREEN]. 2 Select the icon using [Cursor L / P ], then pres s [ENTER]. for the title or track number is highlighted. 3 Press [ Cursor L / P ] to highlight . 4 Enter the desired ti me to search fo r using [Cursor U / D ] or [the Number buttons], t hen press [ENTER].
46 Playing Back Discs EN Note • Y ou can only set A-B repeat playback within the current title (for DVDs) or current track (for Audio CDs and Video CDs.) • Y ou cannot select “Group” d uring the random playback of MP3 files. • For Video CDs with PBC function, repeat playback does not work while the PBC function is on.
47 Playing Back Discs EN Selecting the Format of Audio and Video Y ou can select the format of audio and video to su it the content of the disc you are playing back. Switching Audio Soundtrack When playing back a DVD-Videos recorded with two or more soundtracks (often in dif ferent languages), you can switch among them during playback.
48 Playing Back Discs EN Switching Camera Angles Some DVD-Videos feature scenes shot from two or more angles. The disc case is usually marked with an angle icon if the disc has multi-angle scenes. 1 During playbac k, press [ON SCREEN]. The angle icon appears when a switching camera angle is available.
49 Editing EN Disc Editing Y ou can edit a disc recorded using the P AL system. It is not possible to edit discs recorded using the NTSC system. Guide to a Title List The title list enables you to check the titles recorded on a disc easily . Y ou ca n c hoose a title to play back from the screen and easily edit the titles as you wish.
50 Editing EN 4 Select t he desired title using [Cursor U / D / L / P ], then press [ENTER]. 5 Select “T itle Delete” using [Cursor U / D ], then press [ENTER].
51 Editing EN Note • T o delete letters, pre ss [CLEAR] repeatedly . Press and hold [CLEAR] to delete all letters. • T o move on to the next set of letters, press [Cursor P ] . • Y ou can enter up to 30 letters. • Unrecognisable characters will be replaced with asterisks (*).
52 Editing EN Editing Discs in VR Mode For discs in VR mode, you ca n edit from the “Original” menu or the “Playlist” menu that you create from the original. Editing original titles Y ou can perform the following operations on the original titles.
53 Editing EN Protecting T itles T o prevent the accidental editing or erasing of the titles, you can protect them in the original menu. Press [DVD] first. 1 In stop mode, pre ss [SET UP]. “Easy Setting Menu” or “Advanced Setting Menu” will appear .
54 Editing EN Editing the Playlist in VR Mode Note • When you play back the disc of which the playlist is edited, select “Playlist” in the title menu. Insert a recorda ble disc before ed iting. Deleting Titles In VR mode, even when a title is deleted from the Playlist, the original title will remain in the Original list.
55 Editing EN Editing Titles Y ou can edit the title names from this menu. The names you edit will appear on the title list. Press [DVD] first. 1 Follow steps 1 to 4 in “ Deleting Ti tles.” 2 Select “Edit T itle Name” using [Cursor U / D ], then press [ENTER].
56 Editing EN Setting Pictures as Thumbnails Y ou can set a picture as a thumbnail for each title. This helps you to remember the content of the title without having to play it back. The first picture of the title is selected as the default. Press [DVD] first.
57 Editing EN Combining Titles Y ou can combine two titles into a single title. Press [DVD] first. 1 Follow steps 1 to 4 in “ Deleting Ti tles.” 2 Select “T itle Co mbining” using [Cursor U / D ], then press [ENTER]. 3 Selec t another title to comb ine using [Cursor U / D / L / P ], then press [ENTER].
58 EN Changing t he Setting Menu T our of the Setting Menu The following table shows the items y ou can set and their default settings. Use the table as a reference for efficient operation. Note • Changes you ma ke to the Setting menu remain even after power to the unit is sw itched off or the disc tray is opened or closed.
59 Changing t he Setting Menu EN Language Setting 1 In stop mode, pre ss [SET UP]. 2 Selec t “Advanced Settin g Menu” using [Cursor U / D ], then press [ENTER]. If it has already appeared, proceed to step 3. 3 Select “Playback” using [Cursor U / D ], then press [ENTER].
60 EN Changing t he Setting Menu Display Setting 1 In stop mode, pre ss [SET UP]. 2 Selec t “Advanced Settin g Menu” using [Cursor U / D ], then press [ENTER]. If it has already appeared, proceed to step 3. 3 Select “Dis play” using [Cursor U / D ], then press [ENTER].
61 Changing t he Setting Menu EN Note When playing back a disc with copyr ight protection: • Even if you select “96kHz,” the sound is down sampled to 48 kHz. Select a setting using [Cursor U / D ], then press [ENTER]. Y our setting is activated.
62 EN Changing t he Setting Menu DVD-Videos Parental Lock Level Some DVD-Videos feature a parental lock function. If the rating of the inserted disc exceeds the level you set, playback will stop. Y ou must enter a password before the disc will be played back.
63 Changing t he Setting Menu EN Note •P r e s s [CLEAR] to erase numbers entered incorrectly . • If you forget your password or you want to clear all settings in Parental Lock, enter [4] , [7] , [3] , [7] using [the Number buttons ] at the option window .
VCR Functi ons 64 EN Playback 1 Press [ ST ANDBY/ON /I ] to t urn on the unit. T o play back a tape, turn on the TV and be sure to select the input to which the unit is connected. 2 Press [ VCR]. 3 Inse rt a prerecorded t ape, then press [PLA Y P ] to begin playback.
VCR Functi ons 65 EN Accidental erasure prevention T o prevent accidental recording on a recorded cassette, remove its record tab. T o record on it later , cover the hole with cellophane tape. One-T o uch Ti mer Recording This feature allows you to set the recording length simply by pressing [VCR REC I ] .
VCR Functi ons 66 EN Other Operations Press [VCR] first. T o cue or review pict ure during playback (Picture Search): Press [FWD f ] or [REV r ] during playback. Press it again and the unit will search in super high speed. T o freeze the pict ure on TV screen during playback (Still mode): Press [P AUSE p ] .
67 Others EN T roubleshooting Before requesting service for this unit, check the table below for a possible caus e of the problem you are experiencing. Some simple checks or a minor a djustment by you may eliminate the problem and resto re correct operation.
68 EN Others DVD Symptom Remedy There is no picture. • If the settin g menu display appears, press [SET UP ] or [RETURN] to t urn off the display . Picture noise appears.
69 Others EN *If the above remedies do not solve the problem, please call the service centre for he lp. VCR Symptom Remedy Picture noise appears. • Adjust tracking control for bet ter picture by pressing [PR +/ - ] while you a re playing back a video t ape.
70 EN Others *If you are still having trouble with t he unit after checki ng all the T roubleshooting points, write down the error code and the error description and consult your dealer or an author ized service centre. Error message Cause Solution Disc Error — Please eject the disc.
71 Others EN Language Code Languag e Co de Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5.
72 EN Others Glossary Analogue audio An electrical signal that directly represents sound. In contrast, digital audio can also be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.
73 Others EN Specifications Note • The specifications and design of this pr oduct are subject to change without notice. Declaration of Conformity This product complies with the requirement of the di.
74 EN E9770ED_EN.book Pag e 74 Wednesday, August 3, 200 5 6:35 PM.
75 EN E9770ED_EN.book Pag e 75 Wednesday, August 3, 200 5 6:35 PM.
STANDBY/ON VCR DUBBING PR VCR/DVD S-VIDEO VIDEO (MONO) L - AUDI O - R DVD VCR DVD DUBBING VCR SEARCH VCR SYSTEM VCR SLOW VCR REC EJECT OPEN/ CLOSE SET UP STANDBY/ON REPEAT ZOOM PR RETURN MENU/LIST TOP MENU CLEAR AUDIO PLAY SLOW SLOW PAU S E DVD REC STOP TIMER PROG ON SCREEN ABC .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC DR-MV2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC DR-MV2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC DR-MV2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC DR-MV2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC DR-MV2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC DR-MV2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC DR-MV2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC DR-MV2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
