Manuel d'utilisation / d'entretien du produit JE2608 du fabricant Jensen Tools
Aller à la page of 40
26 ” LCD TV User's Guide Please observe all safety precautions when using this product. Please read this manual carefully before using this product.
.
3 Safety Precautions Power Supply Cautions W arnings Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock. Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire.
4 Installation Cautions W arnings Warnings Do not place the unit where it is exposed to rain, excessive moisture or grease. Doing so may result in fire, electric shock, malfunction, or deformation. Do not use or store flamm able or combustible materials near the unit.
5 Safety Precautions Use and Maintenance W arnings Cautions Do not insert any metal ob j ects, such as a screwd river, paper clip, or bent wire into the ventilation openings or A/V terminals. Doing so poses a serious risk of fire or electric shock. Do not allow children to climb or hang on the unit.
6 Important Safety Instructions Safety Precautions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings.
7 Important Safety Instructions Safety Precautions 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply co.
8 Important Safety Instructions Safety Precautions One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws. Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights.
9 Names of each part User Guidance Information Power Button Channel/Program + , - Button Volume + , - Button Menu Button - OSD Menu Display Button Source Button - Input Source Select Button Front View Accessories The configuration of the components may look different from the following illustration.
1 0 Names of each part User Guidance Information HDMI jack PC and AUDIO jack RF jack POWER ON/ OFF jack AC input jack Y, Pb, Pr jack AV1 AUDIO(L/R) and VIDEO jacks AV2 AUDIO(L/R) and VIDEO jacks S - VIDEO jack Back View 1 2 3 4 5 6 7 8 9 AUDIO(L/R) output jacks 10 Press on the back of the LCD TV to first.
W all Mounting Using the Stand 11 Mounting on a Desktop Installation Precautions User Guidance Information Your LCD TV can be mounted on a Desktop as shown in the figure above. This is not floor-standing unit. Please secure enough space for safe use. (Please refer to A and B.
12 Installing an Antenna User Guidance Information.
.
14 Remote Control User Guidance Information -/-- DTV EPG MTS CC V-CHIP SCALE CC Close Caption DTV Press DTV to display the DTV(A TSC) OSD menu during DTV(A TSC) mode. EPG Press EPG to display the program guide. MTS Press MTS to select Stereo, SAP or Mono.
15 Avoiding Remote Control Problems Inserting Batteries in the Remote Control User Guidance Information 2. Insert the two supplied batteries (AAA, 1.5V). Ensure that the polarities ( + and - ) of the batteries are aligned correctly. 3. Silde back the cover.
16 VCR Connections W atching V ideo T ape Connection 1. Turn on the LCD TV and press on the remote control. 2. Use to move to"AV 1 or 2". If S-Video has been connected, select "S-Video". 3. Turn on the VCR, insert the tape and press play button.
17 Satellite/ Cable TV Set-Top Box Connections Connection 1. Turn on the LCD TV and press on the remote control. 2. Use to move to "AV 1 or 2". If S-Video has been connected, select "S-Video". If HDMI has been connected, select "HDMI".
DVD Connections 18 Connection Connection terminals of other equipments differ by manufacturer and model. Component connection cable Component Audio cable S-Video Cable 1. Connect LCD TV's Y, Pb , Pr terminal to DVD's Video Out terminal using the external cable.
.
20 Powering the LCD TV Power on/ off To turn the LCD TV on : Press the "POWER" button. To turn the LCD TV off : Press "POWER" button on the LCD TV. To turn on/off by remote control : Press the “POWER” button of remote control. Basic Use Selecting Input Source Press Press button on the remote control.
21 W atching TV Basic Use The information about the current channel To turn sound off only Volume Control Channel Up and Channel Down Use the mute function to turn off the LCD TV sound for a while, when a phone or a bell rings. Press to go back to the channel you were previously viewing.
.
23 Application Setting up the DTV(ATSC) Function Scanning the Digital TV channel 1. With the LCD TV connected to a television programming source, press the SOURCE button on the remote control to select DTV mode. 2. Press the DTV button on the remote control to display the main menu, and use the LEFT and RIGHT buttons to select.
24 Application Setting up the DTV(ATSC) Function The DTV(A TSC) menu includes the following options: Channel Caption Allows to set closed caption ON or OFF .
.
26 Application Setting up the DTV(ATSC) Function TV Guidelines Change PIN TV -Y TV -Y7 TV -G TV -PG TV -14 TV -MA ALL FV V S L D Use the UP and DOWN buttons to select the rating you want and press the ENTER button to select Blocked Rating or Unblocked Rating.
27 Application Customizing the PICTURE Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the PICTURE.
28 Application Customizing the SOUND Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the SOUND 3.
29 Application Customizing the FUNCTION Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the FUNCTION.
30 Application Customizing the FUNCTION Settings Using the Parent Guide Settings NOTE: The Parent Guide item can only be activated under TV mode. The US has 2 rating system for viewing content: Movie rating (MP AA) and TV rating. The TV rating conjuncts with the V -CHIP to help parents block inappropriate programs from their children.
31 Application Customizing the FUNCTION Settings The Parent Guide MENU includes the following options : Using the Parent Guide Settings The TV Rating includes the following options AGE-BASED TV -Y TV .
.
33 Application Customizing the TV Settings Air/ Cable Allows selection among HRC, Air , STD and IRC signal sources Skip Allows addition/ removal of channels.
Application Customizing the PC Settings 1. Press the POWER button to turn the LCD TV on. 2. Press the SOURCE button on the remote control to select VGA mode. 3. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the PC.
35 Application Customizing the ADVANCED Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the ADV ANCED.
T rouble shooting Maintenance and Service Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center.
.
LCD-TV W all mounting assembly instruction 1. Lay the TV down with the rear facing up on a non-abrasive surface. 2. Remove the six screws shown in figure A with a Phillips screwdriver . Figure A 3. Remove the stand from the TV by pulli ng it out of the cabinet.
4. Insert the supplied plastic stand cover as shown in Figure C and D. Figure C Figure D 5. Remove the 4 screws shown in Figure E. Figure E 6. Attach the w all mounting bracket (not supplied) using these 4 screws.
www.asaelectronics.com.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Jensen Tools JE2608 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Jensen Tools JE2608 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Jensen Tools JE2608, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Jensen Tools JE2608 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Jensen Tools JE2608, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Jensen Tools JE2608.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Jensen Tools JE2608. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Jensen Tools JE2608 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
