Manuel d'utilisation / d'entretien du produit JiMS-60 du fabricant Jensen
Aller à la page of 16
® DOCKING MUSIC SYSTEM FOR iPOD OWNER’S MANUAL JiMS-60 (iPod Not Included) PLEASE READ THIS OPERATING MANUALCOMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOK LET FOR FUTURE REFERENCE .
1 DEAR JENSEN® CUSTOMER Selecting fine audio equipm ent such as the unit you've just purchased is only the start of your musical enjoym ent. Now it's time to consider how you can maximize the fun and excite ment your equipment offers.
2 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WIT H AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSE RTED TO PREVENT BL ADE EXPOSURE. T O PREVENT FIRE OR S HOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
3 unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is da.
4 COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not caus e harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5 POWER SOURCE This unit is designed to operate on normal household AC power rated at 120V/60Hz. Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty .
6 LOCATION OF CONTROLS AND INDICATORS 1. AC POWER CORD 12. DOCK FOR iPod 2. DIMMER SWITCH 13. iPod PLAY/PAUSE BUTTON 3. WAKE UP SOURCE SELECTOR 14. FUNCTION SELECTOR 4. iPod SKIP BACKWARD ; HOUR BUTTON 15. iPod SKIP FORWARD ; MINUTE BUTTON 5. VOLUME CONTROL KNOB 16.
7 11. FM ANTENNA 22. SLEEP INDICATOR CLOCK SETTINGS When you plug the radio to an AC outlet for the first time the clock display will begin flashing "12:00". The flashing will stop when you set the time. 1. In standby mode, press and hold the TIME SET button and repeatedly press the HOUR button to set the correct Hour.
8 iPod OPERATION 1.) Use the iPod adapter included with your iPod and insert it into the docking area. Your iPod can now be docked by placing the connector on the bottom of the iPod onto t he connector in the docking bay. Note: Please be careful when docking the iPod onto the 30-pin connector in the docking bay.
9 CHECKING THE WAKE UP TIME Whenever you want to check the wake up time, simply press and hold the ALARM SET button. The display will change from current time to wake up time.
10 3. To stop the alarm, press the ALARM SET button. The alarm will stop but the alarm remains set and will turn on the unit again at the same time on the following day. 4. If you do not want the alarm on the following day, set the WAKE UP SOURCE selector to the “ALARM OFF” position.
11 AUXILIARY INPUT This unit provides an auxiliary audio signal input for c onnecting external audio devices such as an MP3 player or TV. Use an audio cable with 3.5 mm stereo plug (not included) to connec t the external device to the AUX IN Jack located on the back of the unit.
12 1. Do not subject the unit to excessi ve force, shock, dust or extreme temperature. 2. Do not tamper the inte rnal components of the unit. 3. Clean your unit with a dry cloth. Solvent or detergent should never be used. 4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
13 iPod is not installed properly. Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. iPod is locked up/ frozen. iPod battery has problem. Please make sure your iP od is working properly before docking into the unit.
14 Apple is not responsible for the operation of this devise or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNA TIONAL, INC.
15 It is recommended that you c ontact SPECTRA first at 1-800-7 77-5331 or by email at custserv @spectrai ntl.com for updated in formation on the unit requiring service. In some cases the model you have may be discontinued, and SPEC TRA reserves the right to offer alternative options for repair or replacem ent.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Jensen JiMS-60 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Jensen JiMS-60 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Jensen JiMS-60, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Jensen JiMS-60 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Jensen JiMS-60, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Jensen JiMS-60.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Jensen JiMS-60. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Jensen JiMS-60 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
