Manuel d'utilisation / d'entretien du produit A31032-001 du fabricant Intel
Aller à la page of 196
Intel® NetS tructure™ 71 10/71 15 e-Commerce Accelerator V ersion 2.3 User Guide A31032-001.
Copyright Copyrigh t © 2000 Inte l Corporation. Al l Rights Re served. This User Guide as well as the software described in it is furn ished under li cense an d ma y only b e u sed or c opied in ac cordanc e with t he terms of th e license.
T able of Content s Chapter 1: Introduction About this User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 New in This Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C O N T E N T S Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide iv Network and Server LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Inline LED . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents v Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 Automapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C O N T E N T S Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide vi Command Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Command Reference . . . . . . . . . . . . .
Table of Contents vii Specifying SNMP Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18 Community String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19 Trap Community String .
C O N T E N T S Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide viii Chapter 9: Troubleshooting Appendix A: F ront Panel Buttons and Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Figures Mounting Bracket Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Front Panel Connectors and LEDs .
F I G U R E S Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide xii Intel’s MIB Tree (top level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 Front Panel Connectors, Controls, and Indicators .
Intr oduction Congra tulations on yo ur choice of th e Intel® NetSt ructure™ 7110 / 7115 e-Commerce A ccelerato r. The processing of secure t r ansactio ns throu gh Secure Sock et Layer (SS L) can occupy up to 90% of even the largest servers’ CPU power and can degrade response ti me signifi cant ly.
C H A P T E R 1 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 1-2 New in This Release New features in the Intel® NetStructure™ 7 110/7115 e-Commerce Accelerator includ e: .
C H A P T E R 1 Who Should Use this Book 1-3 • Monitori ng : Users can now c onfigure the 7110/71 15 to send periodic multi-status reports to th e administration console or a remote managemen t session (Telnet an d SSh).
C H A P T E R 1 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 1-4 How to Use this Book The informat ion in this bo ok is organized as f ollows: • Chapter 1: Intr oduction provides an introduction a nd overview of the 7110/7 115, and a summary of n ew features.
C H A P T E R 1 How to Use this Book 1-5 • Appendix E: T erms and Conditions contains t he software license and ter ms and conditions of u ser of this produ ct.
C H A P T E R 1 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 1-6 Notes.
Installation and Initial Configuration Intel® NetStruct ure™ 7110/7115 e-Commerce Accel erator installa tio n and in itial confi guration in struct ions are in th is chapt e r. Before Y ou Begin WARNING: Do not remove the co ver. There are no user-servi cable parts inside.
C H A P T E R 2 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 2-2 Inst alling the 71 10/71 15 Free- S t anding or in a Rack The Intel® NetS tructure™ 7110/7115 e-Commerce .
C H A P T E R 2 Installing the 711 0/7115 Free- Standing or in a Rack 2-3 3. Position the 71 10/71 15 in the d esired space of y our 19” rack an d attach the front flange of each mou nting bracket to th e rack with two screws eac h. (Rack-mounting screws are not pr ovided.
C H A P T E R 2 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 2-4 S t atus Ch eck Before pr ocee di ng to the PC Initial iza ti on sect ion, t a ke a moment to verify that the 7110/71 15 is correctly c onnected. Network and Server LEDs Verify tha t the Netwo rk and Se rver LE Ds are b oth illum inat ed.
C H A P T E R 2 Installing the 711 0/7115 Free- Standing or in a Rack 2-5 2. T ype an ap propriate name in the Name field of the Conn ection Descriptio n window (e.g., “Confi guration”), and t hen click the OK button . The Phone Number panel a ppears.
C H A P T E R 2 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 2-6 T roubleshooting Server and Network LEDs If either th e Network o r Server LE D fails to illu minate u sing ei th er straight -through or crossov er network cable s, the prob lem may be elsewhere in the network.
Theory of Operation Security New in the Intel ® NetStructu r e™ 7110/7115 e-Commerce Accelerator is Remot e Manag ement cap ability. Thi s feature requires that the 7 110/7115’s network interface be assigned an IP address, thus secur ity becomes a matte r for your attent ion.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-2 Ideally, t he 7110/7115 is located in the same rack as the server, separate d by a short dist ance.
C H A P T E R 3 Working with Internet Traffic Management (ITM ) Devices 3-3 W orking with Internet T raffic Managemen t (ITM) Devices The 7110/ 7115 is compatibl e with Internet Traffi c Management (ITM) dev ices. In such en vironments, the 71 10/7115 lies bet ween the router and the ITM device, or betw een the ITM device and t he server.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-4 Positioning 71 10/71 15 between ITM Device and Server If security considerat ions require limited net work access to clear text, the 7110/ 7115 should be pl aced between the ITM dev ice and the server.
C H A P T E R 3 Keys and Ce rtificates 3-5 7110/711 5 on the server side can also be enabl ed to spill to the server. Spilli ng is performed dyna mically on a co nnection-by-conne ction basis.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-6 There are th ree ways to obtain keys and certifica tes: • Obtaining a cert ificate from V eriSign§ or oth.
C H A P T E R 3 Keys and Ce rtificates 3-7 Obt aining a Certificate from V eriSig n§ or Other Certificate Auth ority Use the create key command to create you r ke y and t he create si gn command to cr eate a signing r equest to be sent to VeriSign or othe r certifica te authority for authen tication.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-8 • Locality : This is usu ally the name o f the city where yo ur or ganization’ s head of fice is lo cated. • Organizat ion : This should be the organ ization th at owns the domain name.
C H A P T E R 3 Keys and Ce rtificates 3-9 Typically , th e CSR will lo o k something lik e this: -----B EGIN CERT IFICA TE REQ UEST ----- MIIBnD CCAQU ACQA wXjEL MAkGA1 UEBh MCQ0E xEDOAB gNVBA gT B09.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-10 5. Create mapping for Server 1. Use t he create map comman d to specify the server IP addr ess, ports, and keyI D. Intel 711 5> create map Server IP ( 0.0.
C H A P T E R 3 Keys and Ce rtificates 3-11 Ap ache SSL§ For key: 1. Look in $AP ACHESSLROOT/con f /httpd.conf f or location o f *.key fi le. 2. Copy and paste the key file. For certificate: 1. Look in $AP ACHESSLROOT/con f /httpd.conf f or location o f *.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-12 Stronghold§ For key: 1. Look in $STRONGHOLDROOT/conf/htt pd.conf for location of *.key fi le. 2. Copy and paste the key file. For certificate: 1. Look in $STRONGHOLDROOT/conf/htt pd.
C H A P T E R 3 Keys and Ce rtificates 3-13 2. Use the import cert command with the keyID. As with import key , choose an import proto col for importin g the key . Use the default t o “paste.” When the paste is finished, add a line brea k followed b y three periods to display the command l ine.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-14 Creating a new Key/Ce rtificate on the 71 10/71 15 Use the create key and create cert commands to creat e new keys and certif icates for 7110/7 115 operation.
C H A P T E R 3 Keys and Ce rtificates 3-15 4. Save the c onfiguration when the server has been mapp ed. Intel 711 5> config save Saving conf igur ation to fl ash. .. Config urati on s aved to fla sh Intel 711 5> Global Site Certificates Overview Four types o f certificates are involved in t he following discussio n: • Root C ertificat e.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-16 A global si te certificate is val idated by an accomp anying intermediate CA certificate. (Such p airs are called “chained certi ficates.”) Examples of intermediate CA certificates incl ude Microsoft SGC Root§, and VeriSign Class 3§ CA.
C H A P T E R 3 Redirection: Clients and Unsupported C iphers 3-17 : OTk3IF Zlcml TaWd uMA0G CSqGSI b3DQ EBAgU AA4GBA LiMmM Mr SPVyzW gNGrN 0Y7u xWLaY RSLsEY 3HTj OLYlo hJGyaw EK0Ra k6 +2fwkb 4YH9V IG.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-18 Intel 711 5> list m ap Map Net Ser Ciph er Re- Cli ent ID Key ID Se rver IP P ort Po rt S uites dire ct Au th == === == == ==== === = === == == = ===== ==== = == == 1 def ault Any 4 43 80 a ll(v2 +v3) n n 2 sam ple 1 0.
C H A P T E R 3 Client Authentication 3-19 Next, import the client CA cer tificate for Ma p ID 2. Intel 711 5> import client_c a 2 Import prot ocol : (pa ste, x mode m, uu decode ) [paste ]: <E nter > Type or p aste in dat a, en d with .
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-20 Creating a Client CA Certificate using OpenSSL§ NOTE: To acquire a copy of Ope nSSL§ for your environment, acce ss the OpenSS L§ Web site at www.
C H A P T E R 3 SSL Processing 3-21 SSL Processing The Intel® NetS tructure™ 7110/7115 e-Commerce Accelerator handles seve ral SSL protoco ls, for example, HTTP S (which is the defaul t). For securit y purposes, you can b lock access to specified I Ps or ports (se e “Blocking” section) .
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-22 of “def ault.” Unde r this ini tial conf iguratio n, automappi ng occurs o n any server with this n etwork port (443) when traffic i s routed through the 7110/ 7115.
C H A P T E R 3 SSL Processing 3-23 Combining automapping and manual mapping NOTE: If both manual mappings a nd appl icabl e automappi ngs are availa ble, the 71 10/7115 always u ses the manual mapping.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-24 Subnet IP , Specific Port To block a subnet IP, and specifi c port combinatio n: 1. T ype a subnet IP address, using 0 as the final octet. (In the exam- ple belo w , all IPs from “10.
C H A P T E R 3 SSL Processing 3-25 Examp le: Intel 711 5> create block Client IP t o bl ock [ 0.0.0. 0]: <en ter> Client IP m ask [0.0. 0.0]: <ent er> Server IP t o bl ock [ 0.0.0. 0]: < enter> Server IP m ask [0.0. 0.0]: <Enter> Server Port to block : 80 Server Port mas k [0x ffff]: <Ent er> 5.
C H A P T E R 3 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 3-26 Failure Conditions, Fail-safe, and Fail-through During a ny failure conditi on of the 7110/711 5, unprocessed dat a packets can either pass throug h or not, depe nding on whether F ail- safe or Fai l-through mode i s enabled.
Scenarios This sectio n contains scenarios il lustrating examples of Int el® NetStruct ure™ 7110/711 5 e-Commerce Accel erator configur ations: • Scenario 1: S ingle server • Scenario 2 : Multi.
C H A P T E R 4 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 4-2 Synt ax The CLI uses the following syn tax: Symbol Significance Angled brackets (< >) Angled brackets desi gnate where you type variable parameters.
C H A P T E R 4 Scenario 1—S ingle Server 4-3 Scenario 1—Single Server This scenari o describes a typical configurat ion of a 7110/71 15 with one server, using either aut omapping or manual con figuration / mapping . This scen ar io desc rib es the fa ste st way to ge t up and runni ng with a 7110/7115 .
C H A P T E R 4 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 4-4 3. Create a mapping for the server . U se the cr eate map command to specify the server IP addr ess, ports, and keyI D. Intel 711 5> cr eate map Server IP ( 0.
C H A P T E R 4 Scenario 2—M ultiple Serv ers 4-5 Scenar io 2—Mult iple Serve rs This scenario sh ows how to configure two or more servers. Figure 4-2 : Single 7110/711 5, Multiple Server Installati on Procedure for Scenario 2 1. Perform th e installation as describ ed in Chapter 2.
C H A P T E R 4 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 4-6 4. Create a mapping for S erver 2. As in th e previous step, use the create map command to speci fy the server IP address, ports for the second server , and the keyID.
C H A P T E R 4 Scenario 3—M ultiple 7 110/7115s, C ascaded 4-7 8. Save the c onfiguration when mapping is complet ed for the server(s). Intel 711 5> co nfig save Saving conf igur ation to fl ash.
C H A P T E R 4 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 4-8 Figure 4- 3: Multipl e (Cascaded) 711 0/7115s Procedure for Scenario 3 1. Configure t he 7110/7 115 f ar thest f r om the server as describ ed in any of the preceding scenari os.
C H A P T E R 4 Scenario 3—M ultiple 7 110/7115s, C ascaded 4-9 9. Specify a filename for t he received file and cl ick OK . The operation concludes an d the normal prompt reappears. Use C trl-X to kill tran smission Export succ essf ul! Intel 711 5> 10.
C H A P T E R 4 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 4-10 Scenario 4—Differen t Ingress and Egress Routers This scenario d escribes the config uration of a 7110 /7115 when the ingress and egress traffic paths are different.
Command Refer ence The Intel® NetS tructure™ 7110/7115 e-Commerce Accelerator is fully conf igurable through the Command Line Interface (CLI). The CLI is accessib le throug h the console and aux con sole RS2 32 ports. Online Help The 7110/ 7115 provid es online help with the foll owing options: • T ype help to display a summary of commands.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-2 Command Lin e Interface The CLI handles all user interactions on the co nsole and auxiliary console RS23 2 ports.
C H A P T E R 5 Command Line Interface 5-3 However, “ sh ” as shown b elow, i s not an a bbrevia tion to u niquene ss in that it d o es not dist inguis h b etween show and showsnmp . Intel 711 5> sh The solitary le tter “ e ” in the context of t he next example, (i.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-4 Input Editing Commands Moving the Insertio n Point Command H istory A history of recentl y executed commands is sto red in a buffer and can be accessed wit h the following commands: Command Desc ription ctrl-b Mov e back one character .
C H A P T E R 5 Command Line Interface 5-5 Cut and Paste Command D escription ctrl-d Del ete the character u nderneath the curso r . ctrl-k Delete the text fr om the c u rrent curso r positi on to th e end of the line. ctrl-u Del ete backward from th e cursor to the beginning of t he current line.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-6 Command Summary This sectio n contains a hi gh-level view of the 7 110/7115’s command structure. Det ails appear in the next secti on, Com m an d Referen ce.
C H A P T E R 5 Command Summary 5-7 import cert <keyID> client_ ca <mapID> config key <keyID> patch upgrade inline list blocks filters (shows bl ocks and permits) keys logs maps mon .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-8 set alarms <all , esc, rsc, utl, ovl, n ls> cache ciphers <mapID> ciphers <mapID> de faul .
C H A P T E R 5 Command Summary 5-9 show alarms blocks cache cert <keyID> client_ ca <mapID> client_ tmo config conf ig de fau lt config saved date defcert egress_mac ether filters idle to.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-10 show telnet _port utl_hi ghwater utl_ lowwater utl_wind ow sets nmp snmp <enabl e | disable> snmp_com.
C H A P T E R 5 Command Reference 5-11 Command Reference Help Comman ds S t atus Co mmand Command D escription help Disp lay the list of a vailable commands. help <c omma nd> Display usage for a single command. help us age Display al l commands and their usage.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-12 SSL Command s Command Desc ription create k ey Create a n ew keypair and associa te it with a Key ID. Exampl e : Intel 71 15> cr eate k ey Key st reng th (51 2/10 24) [512]: 1024 New keyI D [001 ]: <E nter > Keypai r wa s crea ted for keyID: 001 .
C H A P T E R 5 Command Reference 5-13 export key Export a keypair for a specified Key ID (ASCII, xmodem, or uuencode). Synt ax : Intel 71 15> export ke y <keyID> Export pro tocol: (xm odem , uuen code , asci i) [ascii ]: <Enter> Press any key to sta rt, then a gain when done.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-14 create c ert Create a new certificat e for a specified Key ID. Synt ax : Intel 71 15> cr eate c ert <keyID > where <keyID> is the Key IDfor which y ou wish to create a certif icate.
C H A P T E R 5 Command Reference 5-15 show ce r t Display the e xpanded certif icate (includ ing PEM format) associated with a specifie d Key ID. If no Key ID is specified, display s al l c ertificat es. Syntax: Intel 71 15> sh ow cer t <k eyID> where <keyID> is th e Key ID whose associat ed certificate you wish to view .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-16 set redirect Set an alterna tive address to which a client is dire cted in the event it doesn’ t support the specified Map ID’ s selected cipher sui tes.
C H A P T E R 5 Command Reference 5-17 import c lien t_ca If you wish to authenticate a client, use t his command to imp ort the truste d CA ’ s certifi cat e. When e nabled , clients wi th out certifica tes or with invali d certificate s are refused connectio n.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-18 delete sign Delete the signing request for a specified Key ID. Synt ax : Intel 71 15> de lete s ign <keyID > where <keyID> is the Key ID number of the Key whose signi ng request you wish to delete .
C H A P T E R 5 Command Reference 5-19 set defce rt Set the default certificate creation information. For example, country , state, city , or ganization , organizat ion unit, issuer n ame, and issuer e-mail address. Y ou can change al l, some or none of the fields.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-20 set kstre ng th Set the default key str ength. Usable valu es are 512 or 1024.
C H A P T E R 5 Command Reference 5-21 set ser ve r_ t m o Limits the period of time to establish a connec tion with the server . If the connec tion is not esta blished withi n the specified t ime, the client request is re je c ted .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-22 Port Mapping Commands These commands a re used to execu te the operations d escribed in Chapter 3’s Mapping and Blocking sectio ns. Command D efinition create bl ock Create a block to preclude access to sp ecified IP addresses or through speci fied ports.
C H A P T E R 5 Command Reference 5-23 create permit Create a configurati on allowing a specified user acce ss to specified servers and ports, an d/or denying the speci fied user access to specified servers and ports. Example : Intel 71 15> cr eat e perm it Client IP to p ermit [0.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-24 create map Cr eate a mapping that associ ates server IP , SSL po rt, clear text port, an d Key ID. Example : Intel 71 15> crea te map Server IP (0.0 .0.0) : 1.
C H A P T E R 5 Command Reference 5-25 Operational C omman ds Command D escription bypa ss WARNING: Do not issue the by pass command from a remote management session (Telnet or SSh). Doing so will result in an immediate disconnect from the 7110/ 7115.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-26 set spill Allows y ou to enable o r disable spill mod e. “S pill” is used to of fload processing of a req uest, when the 71 15 has reached a specified qu eue threshold, t o a secondary 71 15 or to the ser ver .
C H A P T E R 5 Command Reference 5-27 Remote Manag ement Co mmands Command D escription set i p Assign an IP addre s s and netma sk to the 71 15’ s network interface for T elnet and SSh sessions. CAUTION: The assignment of an IP address intro duces security issues.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-28 set te lnet Enables or d isables T elnet sessions. When t his command is set to “enable” and an IP address is assigned to t he 7115 ’ s network interface, yo u can access the device’ s CL I via remote T elnet session.
C H A P T E R 5 Command Reference 5-29 show telnet _ port Display the po rt on which T elnet sessions are currently accepted. Example: Intel 7115 > show telnet_port Telnet port: 23 set s sh Enable or disab le Secure Shell (SSh) sessio ns.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-30 sets nmp snmp Enable or disable the SNMP agent. When enabl ed, you can set configure SNMP information and parameters (see setsnmp snmp_inf o , below) for th e 71 15.
C H A P T E R 5 Command Reference 5-31 showsnmp snmp_inf o Display t he currently ef fective SN MP information and parameters. Example: Intel 71 15> sh ows nmp sn mp _info SNMP P ort Numb er : 16 1.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-32 sets nmp trap_au then When enabled, t he SNMP manager receives trap s upon failed authenti cation attempts. Example : Intel 7115> setsnmp trap_authen <enable|disable> sets nmp trap_au then Displays current status of trap auth entication trap.
C H A P T E R 5 Command Reference 5-33 delete tra p_com mun ity Del ete SNMP trap community strin gs. Example: Intel 71 15> de let e trap _c ommun ity SNMP T rap Comm unity Strin g(s) Dele tion. <2> Cu rren t Av ailab le SNM P Tra p Co mmunity String (s): 1.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-34 Alarms and Monitoring Co mmand s Command Desc ription set alarm s Enable all or a sel ection of the 71 15’ s alarms. Syntax: Intel 71 15> set alar ms <all|e sc|r sc|u tl|ov l|nls> where <all> enables all five of the 71 15’ s alarms.
C H A P T E R 5 Command Reference 5-35 show rs c _window Display cur rent Refused SSL Connections Alar m interval. Syntax: Intel 71 15> sh ow rs c_wi nd ow Check refu sed SSL c onnect ions [sec s]:.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-36 set ut l_lowwater Se t the Utili zation Threshol d Alarm low-wate r value . Expresse d as a percentage, t he low-water value represent s the lowest CPU utilizat ion, Connectio ns per Second, or T otal Open Con nections required t o trigger a UTL Alarm.
C H A P T E R 5 Command Reference 5-37 show o vl_wind ow Display the current Over l o ad Alarm window . Example: Intel 71 15> sh ow ov l_wi nd ow Check for over load condit ions [sec ]: 10 Command .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-38 Configurati on Com mands Command Desc ription show conf ig Display cur rent volati le configuration settings. Example : Intel 71 15> show config # defaul t config fi le created on Tues July 25 06:56: 46 2000 (Configuraton parameters ar e displayed her e.
C H A P T E R 5 Command Reference 5-39 show config defa ult Display defau lt configurat ion settings. T hese are values used when factory de fault commands are executed.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-40 confi g co mpare Disp lay diff erences between s aved and current configuration. F or optimal flexibili ty in configur ation and test ing, the 71 15 supports both “current” (v olatile) and “saved” (non-vol atile) configurations.
C H A P T E R 5 Command Reference 5-41 expo rt conf ig WARNING: Do no t edi t an exp or ted c onf ig urat ion f ile. Export al l configurati on, key , sign and cert ificate informati on (ASCII, xmodem, uuencode) .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-42 import up gra de Import a complete software release. (See Ch apt er 6 for details regarding software updates.
C H A P T E R 5 Command Reference 5-43 facto ry_defaul t Returns to factory config uration set tings. Example : Intel 71 15> fact ory_def ault Reset to defaul t co nfigu ration [n] : y Reset to factor y de fault s Syste m rebo ot in g. ..don e T944 V2 .
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-44 Adminis tration Comm ands Command Desc ription pass word Set the password. Example : Intel 71 15> pa sswor d Old pa sswo rd: < xxxxx> Enter new admi n pas sword (5 ch ars min.
C H A P T E R 5 Command Reference 5-45 set egres s_mac Allows the configurat ion of a 71 15 when th e ingress and egress traf fic paths are dif ferent.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-46 set more Set the pa ge length of the co nsole display . Defau lt is 300. Syntax : Intel 71 15> set mo r e <n> where <n> is the desired number o f lines.
C H A P T E R 5 Command Reference 5-47 Logg ing Comman ds show seria l Display console serial paramete rs. Example : Intel 71 15> show serial Speed: 9600 Bits: 8 Stop bi ts: 1 Parity : n Intel 71 15> exit Lo g the user out of the CLI.
C H A P T E R 5 Intel® NetS tructure™ 7110/ 7115 e -Commerce Accel erator User Guide 5-48 delete l og Delete saved log/trace fil es from /flash/log s. Syntax : Intel 71 15> dele te log <logID > | all where <l ogID> is the ID of the spe cific log you wish to delete, and all d eletes a ll logs.
Remote Management Overview The curre nt software relea se allows you to remo tely manage the 7110/711 5. Remote management is ava ilable via three protocols: • Te l n e t • Secure Shel l (SSh) • SNMP NOTE: Remote management f unctions can be enabl ed and config ured only th rough the loc al serial console.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-2 Limit ation s Note that sev eral CLI capabili ties available at the local console are unavailabl e in remote sessions.
C H A P T E R 6 Overview 6-3 • show telnet _ port displays current telnet port. SSh-s peci fic: • set ssh enable|disable enables or disables SSh sessions. • show ssh displays c urrent SSh statu s: enabled or di sabled. • set ssh_por t <port> sets the SSh port.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-4 Remote T elnet Sessions This sectio n contains procedures for acce ssing the 7110/711 5’s C LI via remote Telnet session.
C H A P T E R 6 Remote Telnet Se ssions 6-5 Remote Console, T elnet With remo te Telnet enabl ed on the 7110/7115 , use the fol lowing procedure to access it’s CLI: Unix-p rompt > telnet 10.1 .1.1 Trying 10.1 .1.1 ... Connec ted t o 10 .1.1 .1. Escape char acte r is ’^]’.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-6 Disabling T elnet Telnet sessions ar e disabled at the 71 10/7115’s local seri al console.
C H A P T E R 6 Remote SSh Sessions 6-7 Verify the r oute configurat ion (optional) : Intel 711 5> show r oute Defaul t Rou te : 10. 1.1.1 Delete a rou te configurati on (optional): Intel 711 5>.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-8 To displ ay the SSh por t: Intel 7115 > show ssh_port SSH Port Number: 22 0 Disabling SSh SSh sessions are d isable d at the 7110 /7 115’s local ser ial consol e.
C H A P T E R 6S N M P 6-9 S t an dards Complian ce The 7110/ 7115 SNMP agent is bilingual a nd can support both SNMPv1 and S NMPv2c requests. Intel private e nterprise MIB fi les are compliant with SMIv2 as specified i n RFC 1902.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-10 All Intel enterprise MIBs and MIB obj ects are defined u nder the mib2ext branch of the Intel tr ee. All sysObjectIds that ide ntify Intel pr oducts are defined under the sysProducts branch o f the Intel tree.
C H A P T E R 6S N M P 6-11 Enterprise Private MIB Summary Following is a summary of the 7110 /7115 priv ate MIB: mode inline (1): Devi ce is confi gure d to accele rate SSL traff ic bypass (2): Devi .
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-12 thresh oldAl arm enable d(1): Thr eshol d alar m is turn ed on disabl ed(2) : Th resho ld ala rm i s tur ne.
C H A P T E R 6S N M P 6-13 cpuUti lNetw ork CPU ut iliza tion perc entage pro cessi ng net work traffi c (0- 100) cpuUti lProx y CPU pr oxy u tili zatio n perc enta ge (0 -100) cpuUti lHiWa ter CPU u.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-14 sslCon nTota l Total numbe r of SSL connec tion s pro cessed sslCon nCntH iWat er Concur rent open SSL conn.
C H A P T E R 6S N M P 6-15 thrott lesPe rSec Maxim um Maximu m num ber of th rottle s pe r sec ond si nce (re)st art thrott lesTo tal Total numbe r of thro ttles sinc e (re )start thrott les Total nu.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-16 T rap Su mmary The following list summarizes the traps generated by the 7110/ 7115. For details about a partic ular trap, please read the descripti on of each MIB above, or read t he documentation within the MIB file.
C H A P T E R 6S N M P 6-17 sslCon nCntA lert The devic e has ex ceede d th e open SS L connec tion co unt hi gh wa ter th res hold sslCon nCntN orma l The open SS L conn ectio n co unt of th e de vic.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-18 Specifying SNMP Information Configurable SNMP parameters can be set collectively usi ng the setsnmp snmp_in.
C H A P T E R 6S N M P 6-19 Community String Use CLI commands setsnmp snmp_c ommunity , list snmp_commun ity and delete snmp _community to set, list, and delete S NMP community stri ngs. Intel 711 5> set sn mp snmp _com mu nity IP []: Commun ity S trin g []: Intel 711 5> lis t snm p_co mmun it y SNMP C ommun ity List IP: x .
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-20 T rap Community String Use CLI commands, setsnmp trap_commun i ty , list trap_com munity and d elete trap_ community t o set, display, and delete tra p commu nity stri n gs.
C H A P T E R 6 Access Control 6-21 Access Con trol The 7110/ 7115 provid es block and permi t commands which allow you to de ny or allow clients to acce ss servers based on IP, IP mask, port a nd port mask.
C H A P T E R 6 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 6-22 Notes.
Alarms and Monitoring Overview The Intel® NetS tructure™ 7110/7115 e-Commerce Accelerator supports t he configuration of alarms and to be sen t to the conso le upon pre -designated events , and of periodic status-monitor ing reports.
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-2 • Overload alarms • Network Lin k Status All ala rms are disabled by defau lt and may be enab led in any combin ation.
C H A P T E R 7 Alarm Types 7-3 For example: Intel 711 5> set alar ms Select moni tori ng f ields ( all, esc, rsc, utl, o vl, n ls) [all ]: all Intel 711 5> show a larms All alarm s are en abled . Intel 711 5> set alar ms none Intel 711 5> show a larms All alarms are disabled.
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-4 FNTB: indic ates fron t pane l-co ntrol led bypass FNTI: indic ates fron t pane l-co ntrol led inline APPR: .
C H A P T E R 7 Alarm Types 7-5 To display Ov erload Alarm time window show r sc_wi ndow Examp les: Intel 711 5> set rsc_ window 10 Intel 711 5> sho w rs c_win dow Check refus ed S SL c onnecti .
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-6 NMRL: Messa ge: [CPU| Open c onne ction s|CPS] drop b elow low water mark Extended Dat a CPU: I ndica tes that CPU Ut iliz ation trigge red t he a larm. CON: I ndica tes that Total Acti ve C onnect ions trigge red t he a larm.
C H A P T E R 7 Alarm Types 7-7 OVL: Overload Alarm WARNING: This alarm indicates l oss of encryp- tion/ decryption. When enabled, an alarm is issued upon o ccurence of overloads resulting in spill s or t hrottles d uri ng the cu rrent user-c o nfigu re d alarm pe r iod (5 to 65000 se conds, default: 15 seconds).
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-8 NLS: Network Link S t atus Alarm An alarm is issued whenever the Netwo r k or Server link statu s is changed. Format: A:yyyy mmddh hmms s:NLS :NETL| SVRL :LNKD |10HDX |10 FDX|10 0HDX| 100F DX:/* messag e*/ Where: A: ide ntifi es t he me ssage as a n ala rm.
C H A P T E R 7 Alarm Logging 7-9 The histor ical logs consist of a snapshot of the inf ormation retrie vable via the status lin e command foll owed by a dump of the alarm buf fer existi ng at the time of the e xceptional condit ion. These alarms can be viewed on the console using the CLI command, status alarms .
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-10 Transa ction s Sp illed : 0 Times Thott led Accep ts: 0 Bypass Mode : dis able L&M bo ard s tatu s: RES.
C H A P T E R 7 Alarm Logging 7-11 ovl_wi ndow 15 rsc_wi ndow 15 utl_wi ndow 15 utl_hi gh 90 utl_lo w 60 idle 3 00 kstren gth 5 12 con_sp eed 9 600 con_bi ts 8 con_st op 1 con_pa rity n defcer t_cna m.
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-12 Example , status al arms command: Intel 711 5> status alarms A:07/2 7/200 0 14 :57:0 5:ESC: CONI :/* C o.
C H A P T E R 7 Monitoring 7-13 Monitoring Monitorin g Reports A monitori ng report is one lin e of user-con figurable text displayed at the conso le at a user- configurable interval of between five a nd 65000 seconds. The interval default is 1 5 seconds.
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-14 (t)ota l NetIF ;s Net in te rface ; (s )tatus [NC|10 HDX|1 0FDX |100H DX|100 FDX] SvrIF ;s Svr in te rface .
C H A P T E R 7 Monitoring 7-15 Intel 711 5> sho w mo nitor ing_ fi elds All monit orin g fiel ds ar e enab led . Intel 711 5> set mon itoring ena ble Intel 711 5> sho w mo nitor ing The mo nitor ing repo rt is e nabl ed fo r this CLI.
C H A P T E R 7 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 7-16 Notes.
s Softwar e Updates Use the import up grade command to up date/upgrade your Intel® NetStructure™ 7110/7115 e-Commerce Accel erator software. When you upgr ade your 7110/711 5 software, the conf iguration (i ncluding all keys, certificates, and mapp ing) is saved.
C H A P T E R 8 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 8-2 Using Windo ws§ HyperT erminal§ Command: import up grade Use the 7110/ 7115’s aux co nsole po rt, which d efaults t o 115.2 k bps, for greate r speed. The import procedu re (using xmodem) requires approximat ely 7 minutes at 1 15.
C H A P T E R 8 Using Unix§ ‘cu’ and uuenc oded image file 8-3 Command: import p atch Use the 7110/ 7115’s aux co nsole po rt, which d efaults t o 115.2 k bps, for greate r speed. The import procedu re (using xmodem) requires approximat ely 7 minutes at 1 15.
C H A P T E R 8 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 8-4 4. Use the ‘cu’ program t o connect to the 7110/7115 (Device name may vary d epending on your o perating system) . cu –l /dev/ cuaa 0 –s 115200 5. Log in t o the 7110/7 115.
C H A P T E R 8 Using Unix§ ‘cu’ and uuenc oded image file 8-5 6. T ype the im port pat ch c ommand. At the prompt, press u or t ype uudecode . Intel 711 5> im port patch Import prot ocol : (x modem, uude code) [xmode m]: u Type or p aste in dat a, en d with .
C H A P T E R 8 Int e l® NetStructure™ 7110/711 5 e-Commerce Accelerator Use r Guide 8-6 Notes.
T r oubleshooting Item Symptom Probable Cause Remedy 1 Server and/ or Network LEDs not illum inate d. • Unit is in Bypass mode. • Improper cabl ing.
C H A P T E R 9 Int e l® NetStructure™ 7110/7115 e-Commer ce Accelerator Use r Guide 9-2 2 Non-SSL dat a does not pass throu gh 71 10/71 15. Improper cabli ng.
C H A P T E R 9 Troubleshooting 9-3 6 Error message indic a te s that th e browser does not recogn ize the signer of t his certificate after loading g lobal server ID. The in termed iat e certificate i s not instal le d or is instal led improperl y . See Global Site Certifi cates in Chapter 3 for correct proced ures.
C H A P T E R 9 Int e l® NetStructure™ 7110/7115 e-Commer ce Accelerator Use r Guide 9-4 7 Error message: Server/Netw ork media mismatch Server and network p orts have auto negotia ted t o diff eren t medi a settings. Use the status command to de termine the med ia setting s : Intel 71 15> st atus .
Fr ont Panel The following diagram shows the LEDs, buttons, switches and con- nection s for the Intel® NetStructure™ 7110 /7115 e-Commerce Ac- celerato r. Not e that there is no power sw itc h or butt on. Power i s applied to the dev ice by connecti ng the power c able.
A P P E N D I X A Intel® NetStructure™ 7110/7115 e-Commer ce Accelerator Use r Guide A-2 Buttons and Switches There are two buttons and one switch on the fr ont panel of the 7 110/ 7115. Front Panel LEDs The LED display pr ov ide s high-level 711 0/ 7115 infor mat io n.
A P P E N D I X A Front Panel LEDs A-3 Overl oad ON – 71 10/71 15 is saturated with SSL requests. LED ran ges from dim flickering to bright steady , indicating lo w to high spillov e r . Refer to the spill command for ways to offload requests to an other 71 10/ 7115.
A P P E N D I X A Intel® NetStructure™ 7110/7115 e-Commer ce Accelerator Use r Guide A-4 Connectors The foll owing table describ es the 7110/711 5’s connectors. Designator T ype Purpose Network RJ45 100baseTX/10 baseT connection t o network (client s), wired as a host port.
Failur e/Bypass Modes WARNING: Enabling bypass mode will instantl y and without warn ing t er min at e al l acti ve remote management sessions. The Intel® NetS tructure™ 7110/7115 e-Commerce Accelerator is designed with the ability to automatically bypass e-Commerce traffic in the event o f a failure.
A P P E N D I X B Intel® NetStructure™ 7110/7115 e-Commer ce Accelerator User Guide B-2 Figure B-1: Front Pa nel Detail: Failure /Bypass Mode Controls and Indicators Byp ass Button Forcing a b ypass of the 7110/ 7115 may be necessary when certain actions mu st be performed offline (e.
A P P E N D I X B Fail-through Switch (Security Level) B-3 or to be bl ocked. When the switch is in Fail -through mode ( down positi on), t r aff ic is all owed t o p ass t hrough unp rocessed in the event of a f ailure of th e 7110/7115 or i f the Bypass tog gle is ON.
A P P E N D I X B Intel® NetStructure™ 7110/7115 e-Commer ce Accelerator User Guide B-4 Notes.
Supported Ciphers The Intel® NetS tructure™ 7110/7115 e-Commerce Accelerator supports onl y RSA key exchange and authentication. Diffi e-H ellman (including A nonymous and Ephemeral) key exchan ge/authenticati on and DSS aut hentication are n ot supported.
A P P E N D I X C Intel® NetS tructure™ 7 110/711 5 e-Comm erce Accel erator Us er Guide C-2 SSL V ersion Level • SSLv2 - all SSL version 2.0 ciphers • SSLv3 - all SSL version 3.0 ciphers • SSLv2 and SS Lv3 - all SSL version 2.0 a nd 3.0 ciphers The defaul t cipher value is all sup ported ciphers (both SSL v2 and SSL v3).
A P P E N D I X C SSL Vers ion Level C-3 RC2- CBC- MD5 SSLv2 R SA RSA RC2(1 28) MD5 M RC4-MD5 SS Lv2 RSA RSA RC4(128 MD5 M RC4-64- MD5 SSLv2 R SA RSA RC4 (64) MD5 L DES- CBC- MD5 SSLv2 RSA RS A DES(56.
A P P E N D I X C Intel® NetS tructure™ 7 110/711 5 e-Comm erce Accel erator Us er Guide C-4 Notes.
Regulatory Information T a iwan Clas s A EMI St a tement.
A P P E N D I X D Intel ® NetStructure™ 7110/71 15 e-Commerce Accele rator User Guide D-2 VCCI S t atement Class A ITE This is a Class A product ba sed on the standard of the Voluntary Control Council for Interference by Informati on Technology Equipment (VCCI).
A P P E N D I X D Canada Compliance Statement (Industry Canada) D-3 If these suggestion s don’ t help, con sult your d ealer or an experienced radio/T V repair techni cian for more sugge stions. NOTE: This de v ice comp lie s wi th Part 15 of the F C C Rules.
A P P E N D I X D Intel ® NetStructure™ 7110/71 15 e-Commerce Accele rator User Guide D-4 CISPR 22 S t atement WARNING: This is a Class A product. I n a domestic environ ment this product ma y cause radio in terference in which case t he user may be required to t ake adequate measures.
A P P E N D I X D CISPR 22 Statement D-5 • Isolated from strong electromagnetic fields prod uced by electrical devices. • In regions that are susc eptible to ele ctrical storms, we recommend y ou plug your syste m into a sur ge suppressor and disconnect telecommunication lines to your mod em during an electrical storm.
A P P E N D I X D Intel ® NetStructure™ 7110/71 15 e-Commerce Accele rator User Guide D-6 W AR NUNG Das System wurde für den Betr ieb in einer normalen Bür oumgebung entwickelt.
A P P E N D I X D CISPR 22 Statement D-7 • In aree sogg ette a temporal i, è consigli abile collegare il sistema ad un limi tatore di corrente . In caso di tem porali, sc o llegare le linee di co municazione dal mode m. • Dotata di un a presa a muro correttamente i nstallata.
A P P E N D I X D Intel ® NetStructure™ 7110/71 15 e-Commerce Accele rator User Guide D-8 Wi chtige Si cherheit shinwe ise 1. Bitte lesen S ie sich diese Hinweise sor gfältig durch. 2. Heben Sie d iese Anleitung für den spätern Gebrau ch auf. 3.
A P P E N D I X D Wichtige Sicher heitshinweise D-9 15. W enn folgende S ituationen auft reten ist das Gerä t vom St romnetz zu trennen u nd von einerqualifi zierten Servicest elle zu überprüf en: a. Netzkabel oder Netzstecker sint beschädi gt. b.
A P P E N D I X D Intel ® NetStructure™ 7110/71 15 e-Commerce Accele rator User Guide D-10 Notes.
T erms and Conditions and Softwar e License Intel Corporation END USER TERMS AND CONDITIONS OF SALE A ND SOFTW ARE LICENSE IF THE PRODUCT IS PURC HAS ED DIRECTL Y FROM INTEL AND UNLESS SUCH P ARTIES H.
A P P E N D I X E Intel® NetStructure™ 711 0/7115 e-Commerce Accelerator Use r Guide E-2 Intel’ s performance hereunder is expres sly conditioned on End User ’s assent to this Agreement. 2. Orders: End User may purchase Pro duct by submitting a valid purchase order (“Order”) to Intel at the corporate address stated herein.
A P P E N D I X E E-3 at the lesser of eighteen percent (18%) per year or the maximum am ount permitted by law . Intel may refuse shipment to End Us er if End User is delinquent in making payments to Intel.
A P P E N D I X E Intel® NetStructure™ 711 0/7115 e-Commerce Accelerator Use r Guide E-4 (2). The license acc ompanying the Product shall apply to Les- sor; and (3). Notwithst anding anything to the contrary in the li cense accompanying the Product, Lessor may transfer such title and license rights to End User under a leasing arrange- ment.
A P P E N D I X E E-5 This warranty does not cover replacement of products damaged by abuse, accident, misuse, neglect, al teration, repair, disaster, improper installation or improper testing.
A P P E N D I X E Intel® NetStructure™ 711 0/7115 e-Commerce Accelerator Use r Guide E-6 the process of being inst alled. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER W A RRANTY , WHETHER EXPRESS , I.
A P P E N D I X E E-7 17. Export Law Regul ations: 17. 1. Applicable Laws . End User acknowledges that all Product s, spares, documentation or other materials (collectively “Product”) are subject .
A P P E N D I X E Intel® NetStructure™ 711 0/7115 e-Commerce Accelerator Use r Guide E-8 19. Copyright s; T rade Secret s: End U ser acknow ledges and agrees that th e structure, sequence and organ.
Glossary This section def ines terms and acron yms used throughou t the Intel® NetStructure™ 7 110/7115 e-Commerce Accelera tor User Guide . Bypass User action c ausing traffic to bypass 7110/7 115 processing, done either th ro ugh the CL I byp ass command or Bypass button on th e front pa nel of the 7110/71 15.
G L O S S A R Y Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Glossary -2 Fulfi llment Se rver A server tha t stores content used to satisfy user reque sts. HTTP Hypertext T ransfer Protocol: the protocol u sed between a Web browser and a server to request a document and transfer its con tents.
G L O S S A R Y Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Glossary -3 Service A service is an IP application paired with a port number. F or example: “HTTP:80.” This describ es a service consisting of a server's HTTP application listening on port 80.
G L O S S A R Y Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Glossary -4 Notes.
Support Services Intel of fers a range of su pport services for your new product. You can learn about the options availab le for your are a by visiting the I ntel® support Web si te at http: //www.intel. com/network/ service and choosing your geography.
S U P P O R T Intel® NetStructure™ 7 110/7115 e-Commer ce Accelera tor User Guide Support-2 Indonesia 2 Dial 001-801-10, await dial tone , dial 800-838-71 36 Korea 1 Dial 0-91 1, await dial to ne, .
S U P P O R T Intel® NetStructure™ 711 0/7115 e-Commerce Acceler ato r User Support-3 Switz erland 1 Dial 0-800-55001 1, await dial t one, dial 800-83 8-7136 United Kingdo m (Mercury) 3 Dial 0500-8.
S U P P O R T Intel® NetStructure™ 7 110/7115 e-Commer ce Accelera tor User Guide Support-4 Notes.
Index A Access Control 6-21 Administration Commands 5-44 Alarms Encryption status change 7-3 Logging 7-8 Network link status 7-8 Overload 7-7 Refused SSL connections 7-4 Utilization threshold 7-5 Auto.
I N D E X Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Index- 2 Deleting a block 3-25 E Egress routers 4-10 Encryption status change alarm 7-3 F Failure/Bypass modes B-1 Fron.
I N D E X Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Index- 3 Telnet, local console 6-4 Telnet, remote console 6-5 Remote SSh sessions 6-6 S Scenar ios Cascading Multiple 7.
I N D E X Intel® NetStructure™ 711 0/7115 e-C ommerce Accele rator User Guide Index- 4 Notes.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Intel A31032-001 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Intel A31032-001 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Intel A31032-001, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Intel A31032-001 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Intel A31032-001, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Intel A31032-001.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Intel A31032-001. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Intel A31032-001 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
