Manuel d'utilisation / d'entretien du produit LAU-26TPVR du fabricant Humax
Aller à la page of 76
LCD D igital and A nalogue TV D igital 2 T uner PVR B uilt-in LAU-26TPVR GB.
LCD Digital and Analogue TV.
Caution To reduce the risk of electric shock, do not remove cover(or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety Instructions 3. Safety Instructions This LCD-TV has been engineered and manufactured to assure your safety . Y ou can prevent serious electrical shoc k and other hazards by keeping in mind the following: Do not place anything heavy , wet or magnetic on the LCD TV or the power cord.
Contents 4. Contents - Analogue TV Package Contents Front Panel Rear Panel Remote Control + Main Remote Control + Simple Remote Control + Inserting the Batteries Mounting Device + Assembling the Stand.
Contents 5. Contents - PVR Recording + Instant Recording - Setting the Recording Qualit y - Setting the Clipping Noise Reduction + Recording R eservation - Adding Recording R eservations - Editing Rec.
Contents 6. Contents - Digital TV Digital TV Channel Setup Basic Operation + Switching Channel + Changing the Subtitle Language + Changing an Audio Language + Programme Information - Information Banne.
Package Contents 7. Package Contents + Please chec k all package contents before using your LCD-TV . + P ackage Contents may be different according to the area.
Front Panel 8. Front Panel 1. : STANDBY Switches between Operation and Standby modes. Displays R ed colour when the set is in standby mode. Changes to Green colour when the set is switched on. 2. ̷GG CH ̵ Selects a programme or a menu item. 3. ൖ VOL ൘ Adjusts the volume.
15. COMMON INTERFACE 16. SMARTCARD SLOT 17. MAIN POWER 1. AC INPUT Connect the supplied AC power cord. 2. DVI INPUT Connect to the digital video output jack of an external device with DVI output. 3. PC INPUT Connect to the video output jack on your PC, using the PC cable supplied.
Remote Control All the functions can be controlled with the R emote Control handset. Some function can also be adjusted with the buttons on the front panel of the set. Both the Main Remote Control to control the all functions and the Simple R emote Control to control the some simple functions are provided.
Remote Control 11. Remote Control 1. STANDBY Switches between Operation and Standby modes. 2. SLEEP Sets the sleep time. 3. MUTE Mutes the audio. 4. TV/AV Selects input signal between TV and another signals. 5. WIDE Enlarges the picture to the wide aspect ratio in the Digital TV mode.
TELETEXT BUTTONS A. TELETEXT ( ) Activate/Deactiv ate the teletext service. C. MIX ( ) Displays the teletext with the broadcasting screen. D. INDEX ( ) Displays the teletext index page. E. UPDATE ( ) Displays the TV picture on the screen whilst waiting for the new teletext page.
Remote Control Simple Remote Control 13. Remote Control 1. STANDBY 2. MUTE 3. TV/AV 4. OK 5. CH (Channel) ̵ / ̷ 6. VOL (Volume) ̵ / ̷ 7. BACK 8. MENU 9. GUIDE 10. PAUSE / PLAY 11. LIST 1. STANDBY Switches between Operation and Standby modes. 2. MUTE Mutes the audio.
Remote Control 14. Remote Control Inserting the Batteries Y ou must insert or re place the batteries in the remote control when you: + Purchase the TV . + Find that the remote control is no longer operating correctly . 1 . Pull the battery cover upward in the arrow direction to remo ve.
Mounting Device 15. Mounting Device This describes how to set up the LCD-TV . Select the most appropriate procedure depending on your requirements . If you encounter any problem when setting up the LCD-TV, please contact your local LCD-TV distributor.
Connecting the External Equipment 16. Connecting the External Equipment Y ou can connect additional equipment, such as V CRs , DV D , etc. to your set.
Connecting the External Equipment 17. Connecting the External Equipment Connecting the External Devices 1. Connect video/audio RCA cable using a ferrite core as indicated in the diagram. 2. For optimal visual image, use S-VIDEO lead(cable not supplied).
Setting the Analogue Channels 18. Setting the Analogue Channels Setting the Analogue Channels Automatically Y ou can scan for the frequency ranges available to you (and a vailability depends on your country .) Automatically allocated programme numbers may not correspond to actual or desired prog ramme numbers .
Setting the Analogue Channels 19. Setting the Analogue Channels Setting the Analogue Channels Manually The Manual Prog ramme allows y ou to manually tune and ar range the channels in the order you desire . Y ou can also assign a channel name with characters to each c hannel number .
Editing the Analogue Channls This function enables you to delete, copy , mo ve, or skip the stored c hannel. It ˅ s only for analogue TV mode. 1. Press the MENU button. 2. Select Channel using the ̵ / ̷ button, and press the OK or ൘ button. 3. Select Edit Programme using the ̵ / ̷ button, and press the OK or ൘G button.
Basic Operation 21. Basic Operation Powering the TV On/Off 1. Connect the plug to the wall outlet. 2. Press the MAIN POWER button on the rear of the LCD- TV to turn the TV power on.
Listing Channels Y ou can watch the programme list while watching analogue TV . 1. Press the LIST button. 2. Select a channel using the ̵ / ̷ button, and press the OK button to switch to the selected channel. Y ou can also move to the next or previous list page using the PAGE +/- button.
Mode Y ou can select the picture type you prefer . 1. Press the MENU button. 2. Select Picture using the ̵ / ̷G button, and press the OK or ൘G button. 3. Select Mode using the ̵ / ̷G button and press the ൖG or ൘ button to select a particular mode.
PIP/TWIN With PIP , Picture in Picture, y ou can call up a small screen within the main screen. This enables you to watc h two different input sources at the same time . In this way , you can w atch TV prog ramme or monitor the video input from any connected devices while watc hing TV or other video input.
Setting the PIP/TWIN 25. Setting the PIP/TWIN 1 2 2 1 1 2 2 1 8. Select Swap using the ̵ / ̷ button, and press the ൘ button to exchange the picture in the main screen and small screen.
Changing the Sound 26. Changing the Sound Y ou can select the prefer red sound settings which corresponds with the personal sound settings . 1. Press the MENU button.
Setting the Current Time Y ou can set the cur rent time. If you wish to use the P ow er On or Off Time, you m ust also set the Local Time. 1. Press the MENU button. 2. Select System using the ̵ / ̷ button, and press the OK or ൘ button. 3. Select Time Setting using the ̵ / ̷ button, and press the OK or ൘G button.
Language 1. Press the MENU button. 2. Select System using the ̵ / ̷ button, and press the OK or ൘ button. 3. Select Language using the ̵ / ̷ button, and press the ൖ or ൘ button to select a particular language. OSD Transparency 1. Press the MENU button.
Y ou can display T eletext infor mation at any time on your TV . Most TV channels broadcast infor mation via teletext. Each channel whic h broadcasts teletext transmits a page with infor mation on how to use its teletext system. D epending on the TV channel, teletext is transmitted in different systems .
Setting the PC Input 30. Setting the PC Input 1. Press the TV/AV button to switch to PC mode. 2. Select PC using the ̵ / ̷ button, and press the OK button. 3. Press the MENU button. 4. Select PC Input Setting using the ̵ / ̷ button, and press the OK or ൘ button.
Instant Recording Since the LCD-TV has a hard disk driv e inside, you can record a programme with out an external media device such as a VCR. 1. Press the RECORD ( ) button on the remote control to record the current programme instantly . 2. You can change the recording duration time by pressing the RECORD ( ) button repeatedly .
Setting the Recording Quality 1. Press the MENU button. 2. Select Recording using the ̵ / ̷G button, an d press the OK or ൘ button. 3. Select Recording Quality using the ̵ / ̷G button, and press the ൖG or ൘ button to select a particular thing.
Recording Reservation Y ou can reser ve recording to record your desired programme automatically . Y ou can reser ve recording of a prog ramme using Menu - Recording - Recording Schedule . Adding Recording Reservations 1. Press the MENU button. 2. Select Recording using the ̵ / ̷ button, and p ress the OK or ൘ button.
Editing Recording Reservations 1. Press the MENU button. 2. Select Recording using the ̵ / ̷ button, and press the OK or ൘ button. 3. Select Recording Schedule using the ̵ / ̷ button, and press the OK or ൘ button. 4. Select a reserved item which you w ant to edit using the ̵ / ̷G button, and press the OK button.
Time Shifted Recording This LCD-TV automatically saves the programme on air in the installed hard disk driv e temporarily , so that users can watch programmes as they watch a video tape using functions such as rewind, fast forw ard, instant re play and pause .
4. If you press the STOP ( ) button, the TSR time bar will disappear and the playback will be stopped. 5. T o stop the time shifted recording, press the TSR button until when Time Shift Off message appears. Note : _ It is possible that you may not record the scrambled programme or data programme normally.
Programme Playback Y ou can watch the recorded programme by selecting a desired programme in the Menu - Recording - Recorded Programmes and pressing the OK or PLAY/P AUSE ( ) button. 1. Press the MENU button. 2. Select Recording using the ̵ / ̷ button, and press the OK or ൘ button.
_ During the TSR playback or Programme Playback, the TruSurround XT and Auto Volume Level menus are disabled. 38. currently on recording..
Editing Recorded Programmes Select Menu - Recording - R ecorded Pr ogrammes , and then select the desired recorded prog ramme to edit the infor mation of the prog ramme. Editing Title Y ou can edit the title of a recorded prog ramme. 1. Select your desired programme in the list using the ൖV൘G button.
Playback 40. Playback Connecting the External HDD Y ou can also save/backup the recorded data to external stor age device via USB port located on the rear of the LCD- TV . Connect a USB cable between an external storage device and USB port of the L CD- TV .
Playback Control Y ou can perfor m playback control using playbac k buttons of the remote controller . Y ou can use trick play functions during instant recording, time shifted recording or playing recorded programme. PLAY/PAUSE If you press PLAY/PAUSE ( ) button on the remote controller on playing, the playing is paused.
Playback 42. Playback Instant Replay If you press the INSTANT REPLAY ( ) button, the current programme is played from the 10 seconds before. Repeat between A and B Y ou can play special section repeatedly . Y ou can set the section by pressing the A-B ( ) button twice.
HDD Control 43. HDD Control Checking the Hard Disk Drive Y ou can check the free space of the hard disk driv e, and can for mat the disk drive if necessary . 1. Press the MENU button. 2. Select Recording using the ̵ / ̷ button, and press the OK or ൘ button.
HDD Control 44. HDD Control Connecting the External HDD Y ou can also save/backup the recorded data to external stor age device via USB port located on the rear of the LCD- TV . Connect a USB cable between an external s torage device and USB port of the LCD- TV .
When you purchase y our LCD-TV , you can run the Automatic Search. It immediately perfor ms Channel Search.(Y ou can also r un the digital TV channel setup in Default Setting .) 1. T urns on the TV in the Digital TV mode. 2. Starts the Automatic Search immediately .
This chapter describes functions such as switc hing channel, changing language, and basic features for watc hing prog rammes. Switching Channel Y ou can switch the current channel using one of the following methods . 1. Press the CH +/- button. 2. Enter your desired channel number using the NUMERICAL (0~9) button to move to the channel directly .
Note : _ you can select your desired default audio language by selecting DTV SETUP- Preferences - Local Setting - Audio Language menu. _ If the programme is broadcast in Dolby Digital one, you cannot set the audio preference such as left, right, and stereo.
Basic Operation 48. Basic Operation Detailed Programme Information Y ou can see detailed infor mation about the current prog ramme. Press the INFO button. Note : _ Press the INFO button again to hide the information box. _ If the detailed programme information is more than one page, use ̵ / ̷ button to move to the previous or next page.
Displaying and Switching Channel List Y ou can display channel list using LIST button and switc h to other channels on the channel list. 1. Press the LIST button while watching a channel to display the channel list. 2. Select your desired channel using the ̵ / ̷ button and press the OK button to change the channel.
Select a Channel Group Y ou can select the channel list group to edit TV or Radio . 1. Press the OK or ൘G button in Group to display channel list group. 2. Select your desired channel list group using the ̵ / ̷ button, and press the OK button. Note : _ Press the DTV CH or RADIO CH button to move to TV or RADIO channel list directly.
Lock/Unlock Channels Y ou can lock or unlock one or more channels . 1. Move the cursor to the channel list using the ൖ / ൘ button. 2. Select your desired channel, and then press the OK button. Y ou can select multiple channels. 3. Select Lock in the right using the ൘ button, and press the OK button.
Editing Favourite Channels Y ou can edit Fa vourite channel or F av ourite channel list. 1. Press the DTV SETUP button. 2. Select Edit Channels using the ̵ / ̷ button, and press the OK button. 3. Select Edit Favourite Channels using the ̵ / ̷G button, and press the OK or ൘ button.
The Prog ramme Guide displays programme infor mation about each channel, based on the date and time. Y ou can also schedule your recording using the infor mation given. Note : Press the GUIDE button to exit the Guide screen. Viewing Programme Guide Information Y ou can view prog ramme infor mation for all channels .
Viewing Programme Information Using Time Bar Y ou can quickly search for y our desired time slot using the Time bar. 1. Press the GUIDE button. 2. Press the GREEN button to display the Time Bar . 3. Select the each button using the GGGGൖ / ൘ button, and press the OK button to move as your desired amount of time.
Finding a Programme by Programme Genre 1. Press the GUIDE button. 2. Press the BLUE button to display Genre screen. 3. Select By Genre and press the OK button to search programme by genre. 4. Select your desired genre using GGGG̵ / ̷ / ൖ / ൘ button and press the OK button.
Y ou can set censorship classification, password, time and other options to enhance your viewing pleasure . Note : _ Press the BACK or ൖ button to save the changes and return to the previous menu. Press the EXIT button to exit the Menu screen. _ You can easily select all menu items using the assigned numerical button for each menu.
Changing Password Y ou can change the cur rent password into a new one . 1. Select Change Password using the ̵ / ̷ button, and press the OK or ൘ button.
Time Zone Y ou can adjust the time by selecting Time Zone according to your location. 1. Select the Time Zone using the ̵ / ̷ button. 2. Select your desired option using the ̵ / ̷ button. NSW/ACT : VIC : QLD : SA : WA : TAS : NT Audio/Subtitle Language Y ou can set the language for Audio and Subtitles .
Miscellaneous Settings 1. Press the DTV SETUP button. 2. Select Preferences using the ̵ / ̷ button, and press the OK or ൘G button. 3. Select Miscellaneous Settings using the ̵ / ̷ button, and press the OK or ൘G button.
Automatic Search If your LCD-TV is connected to a suitable aerial(outdoor aerial recommended) you can automatically searc h channels without entering any other infor mation. 1. Press the DTV SETUP button. 2. Select Installation using the GGGG̵ / ̷ button, and press the OK or ൘ button.
Regional Search Y ou can search channels based on state , region, and location. 1. Press the DTV SETUP button. 2. Select Installation using the GGGG̵ / ̷ button, and press the OK or ൘ button. 3. Select Regional Search from Installation menu using the GGGG̵ / ̷ button, and press the OK or ൘ button.
Manual Search Y ou can search channels man ually by searching parameters , if you know the multiplex-parameters(c heck with your local broadcaster). 1. Press the DTV SETUP button. 2. Select Installation using the GGGG̵ / ̷ button, and press the OK or ൘ button.
Default Setting Default Setting restores the LCD-TV to the default settings Warning : Please Note that once you perform Default Setting, all data such as Aerial Setting information Channel List, and User Configured data are deleted. To perform Factory Default: 1.
System Information 64. System Information Y ou can view all system infor mation, and signal detection. 1. Press the DTV SETUP button. 2. Select System using the ̵ / ̷ button, and press the OK or ൘ button. Status Y ou can view the System infor mation 1.
Common Interface Y ou can view the cur rent status of the CI module. 1. Select Common Interface using the ̵ / ̷ button, and press the OK or ൘ button. 2. Select Slot 1 , and press the OK or ൘ button. 3. If Common Interface is av ailable, you can view information about each Slot.
Software Upgrade 66. Software Upgrade In order to maintain proper perfor mance of this LCD-TV , it is essential to have the most up-to-date software . T he latest news and release of software versions may be found at the HUMAX we bsite (http://www .humaxdigital.
Picture Sound Analogue TV Digital TV Menu Map 67. Menu Map LCD TV Menu PC Main Menu Mode Brightness Contrast Sharpness Colour Colour Temperature PIP/TWIN Effect Bass Treble Balance Auto Volume Level T.
Preferences Edit Channels Installation System Games Menu Map 68. Menu Map Digital TV MENU Parental Control Local Setting Miscellaneous Settings Edit Channel Lists Edit Favourite Channels Automatic Sea.
Troubleshooting 69. Troubleshooting Troubleshooting Before contacting your local ser vice dealer , please make sure you refer to the following guide . If the LCD-TV does not work normally after completing the following trouble shooting, please contact y our local LCD-TV distributor or ser vice centre.
70. Troubleshooting Error message No or bad signal The channel is scrambled or not available. The channel is scrambled. The audio is not available. The fan is out of control: please turn it off. Possible causes + The aerial is not installed correctly .
Troubleshooting 71. Troubleshooting Error Message Problem No picture on screen and No sound from speakers. No picture / No picture from AV terminal. Picture is displayed, But no sound from the Speakers. Picture is too light. Picture is too dark. Remote controller does not work.
Specification 72. Specification Specification +T y p e + Display Area + Display Colour + Pixel Pitch + Max. Resolution + Interface + Viewing Angle + Contrast Ratio + Brightness + Horizontal Frequency + Vertical Frequency + Dimension + Sync + Horizontal Frequency + Vertical Frequency + Max.
73..
Service and Support 74. Service and Support Y ou can get infor mation such as a troubleshooting guide, softw are upg rades and product support guide from the following web sites and call center (Hotline). Please tr y to contact to your local dealers first when y ou have any problem.
LCD-TV Digital and Analogue HTVAU26TPVR_200GB P/N 20010-0270.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Humax LAU-26TPVR c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Humax LAU-26TPVR - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Humax LAU-26TPVR, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Humax LAU-26TPVR va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Humax LAU-26TPVR, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Humax LAU-26TPVR.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Humax LAU-26TPVR. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Humax LAU-26TPVR ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
