Manuel d'utilisation / d'entretien du produit L3040 du fabricant Humax
Aller à la page of 65
HUMAX USA, INC. Please contact us at: 866.Humax.USA (866.486.2987) Humax USA, Inc. 3601 West Garry Ave Santa Ana, CA 92704 www.humaxusa.com L3040 OWNER’S MANUAL.
2.
3 Important Safety Instructions W ARNING : DO NOT EXPOSE THIS DEVICE TO DRIPPING OR SPLASHING, OR PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS DEVICE. This symbol alerts you that important literature concerning operation and maintenance has been included with this device.
Important Safety Instructions 4 Important Safeguards for You and Your New Device Always be careful when using your LCD TV. To reduce the risk of fire, electric shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your LCD TV.
5 Important Safety Instructions 18. If an outside antenna or cable system is connected to the device, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the U.
6 User Instructions Like all phosphor-based display devices and all TFT LCD Displays, LCD TV' s can be susceptible to phosphor burn under certain circumstances. Certain operating conditions, such as the continuous display of a static image over a prolonged period of time, can result in phosphor burn if proper precautions are not taken.
7 T able of Contents ST ART -UP ● Part Names and Functions ..............................8~9 ● Checking Parts ..................................................10 ● Battery Installation and Replacement ................10 CONNECTION ● Connecting VHF and UHF Antennas .
FRONT VIEW Part Names and Functions 8 POWER/LED IR Receiver SPEAKER Menu : Displays the On screen Display (OSD). Source : Displays an available video source (i.e. RGB, DVI, Video, S-Video, TV, Component1 and Component2). Also functions as the Select button in the On screen Display (OSD).
REAR VIEW 9 Part Names and Functions VHF/UHF For connecting outdoor Antenna RS-232C This terminal is used when control functions need to be operated externally by PC. DVI Input a digital video signal (TMDS/HDCP) from your PC or DTV receiver. RGB(D-sub 15pin) Input an analog RGB signal from your PC.
Battery Installation and Replacement 10 Checking Parts Insert four AAA batteries. Make sure to insert them with the proper polarity. Press and open the cover. 1 Align the batteries according to the (+) and (-) as indicated inside the case. 2 Close the cover.
11 Connection Connecting VHF and UHF Antennas Connecting an Outdoor Antenna For the best reception, we recommend you use an outdoor antenna. Severely weathered antennas and antenna cables can reduce the signal quality.
12 1. Connect video cable(not supplied) to the VIDEO INPUT jack on the LCD TV and the video output jack on the external equipments.(VCR/Cable box, etc.,) 2. Connect audio cables(not supplied) to the AUDIO INPUT(L, R) jack on the LCD TV and the audio output jack on the external equipments.
13 Connecting a DTV Receiver (Component Video) 1. Connect video cables(not supplied) to the Y, Cb/Pb, Cr/Pr input jacks (Component 1 or 2) on the LCD TV and the video output jacks on the digital Set-Top Box.
14 Connecting a DTV receiver( DVI ) 1. Connect a DVI cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI with HDCP OUTPUT jack on the digital Set-Top Box. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jacks on the digital Set-Top Box.
15 Connecting a PC ( DVI ) 1. Connect a DVI 29pin cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC.
16 1. Connect a PC cable, D-sub 15pin(not supplied) to the ANALOG PC INPUT jack on the LCD TV and RGB output jack on the PC. 2. Connect audio cables(not supplied) to the AUDIO INPUT jacks on the LCD TV and audio output jack on the PC. To watch the PC screen : 1.
17 Remote Control Buttons POWER : Switches Power ON/OFF. SOURCE : Press this button to select a video source from among Video, S- Video, Component1, Component2, RGB and DVI. MUTE : Mutes the sound. S-SWAP : Exchanges main sound with sub- sound. SELECT : Press this button to select a menu item or to enter the sub-menu.
18 LCD Window Feature LCD window feature Select when you want to control a product other than this LCD TV. Select when you want to know the code for this remote control. Select when you want to set the fixed button. Indicates that the button you pressed is not operating.
19 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window.
20 Turn on the product you want to control. Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window.
21 Confirming the MBR Code in Y our Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). Using the buttons, move to the CODE icon and press the SEL button. The word TV will appear in the product indication window.
22 PUNCH Buttons How to Set Up the Fixed Buttons - PUNCH Buttons T ypes of PUNCH Button. TV : VOLUME ( ) , MUTE If you select the TV PUNCH, these buttons are operated only on the TV. VCR If you select the VCR PUNCH, these buttons are operated only on the VCR.
23 How to Reset the Remote Control Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear). The MBR icon will appear and blink. Press the SEL button. The word TV will appear in the product indication window. Press the SEL button.
24 Basic operation Connect the Power Cord to the AC input on the back of your LCD TV. Insert the Plug for the LCD TV into a nearby electrical outlet. The standby indicator lights up on the front panel. Press the POWER ( ) button on the remote control.
25 Basic operation With the OSD, press the INFO button on the remote control. The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type. 1 Displaying Status Information Selecting your Language After adjustment: Press the MENU button to exit.
26 Channel Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode . Press the or button to select the option ( TV or CATV ). Press the or button to select Auto Program ; then press the SEL ( ) or button.
27 Channel After adjustment: Press the MENU button to exit. Using the LNA(Low Noise Amplifier) Press the MENU button. Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button. Press the or button to select to the LNA . Press the or button to select On or Off .
28 Direct Access Features Using the F A V button to select the previous channel Press the FAV button on the remote control. The LCD TV will switch to the last viewed channel. 1 1 Press the VOL+ or VOL- button to increase or decrease the Volume on the remote control.
29 Direct Access Features Press the SOURCE button on the remote control. Press the or button to select signal source, then press the SEL ( ) button. 1 2 Selecting a Device from External Sources Source.
30 Picture Press the MENU button. Press the or button to select the PICTURE ( ) icon; then press the SEL ( ) or button. Press the or button to select Standard , Dynamic , Mild , or Custom picture setting.
31 Picture Press the MENU button. Press the or button to select the SOUND ( ) icon; then press the SEL ( ) or button. Press the or button to select Drama , Movie , Music , News , or Custom sound setting. 1 2 3 Changing the Sound Standard With Sound menu selected,press the or button to select an Equalizer ; then press the SEL ( ) or button.
32 Sound 1 2 3 Setting the BBE Mode 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Middle Mono Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit.
33 Sound Selecting the Stereo Sound 1 2 3 4 Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Stereo Off Move Adjust Exit Sound Mode Equalizer Pro. Custom Balance BBE Mode Surround Sound Mode AV L 50 50 L R On Low Mono Off Move Adjust Exit After adjustment: Press the MENU button to exit.
34 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. With Aspect Ratio selected, press the or button to select the screen size you want. 1 2 3 Changing the Screen Size After adjustment: Press the MENU button to exit.
35 Setup 1 2 3 Protecting Screen burn(Long Life) 4 5 Displaying a still image on the LCD TV for more than several minutes can cause screen image retention. This image retention is also known as “screen burn”. The Long Life function reduces such image retention.
36 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) button. Press the or button to select Time ; then press the SEL ( ) or button. With Clock selected, press the button to move to the AM/PM, hour or minute; then Press the or button to adjust item.
37 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Sleep Timer. Press the or button to select the preset time interval for the LCD TV to stay on. The interval ranges from 5 to 120 minutes.
38 Setup Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Reset . Press the or button to select OK or Cancel . 1 2 3 Factory Reset 4 Setup Aspect Ratio Wide Long Life Sleep Timer Pro.
39 PIP(Picture In Picture) Press the MENU button. Press the or button to select the PIP ( ) icon; then press the SEL ( ) button. Press the or button to select On . When the PIP is on, the Sub-menu is activated. Press the or button to select Type .
40 PIP(Picture In Picture) Main Picture TV CVBS DVD/480i DVD/480p DTV/480i DVD/480i DVD/480p DTV/480i RGB DVI TV CVBS DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i DVD/ 480i DVD/ 480p DTV/ 480i DTV/480p, 720p, 1080i RGB DVI Sub-Picture COMP 1 COMP 2 DTV/480p, 720p, 1080i DTV/480p, 720p, 1080i ■ Table1.
41 OSD Press the MENU button. Press the or button to select the OSD ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Turn off Time . Press the or button to set up the time length of OSD display. you can adjust time length from 3 to 59 seconds.
42 V -CHIP Operation The V-CHIP is a microprocessor control circuit that recognizes TV and Motion Picture Ratings. These ratings are contained in a special electronic identification signal that is part of many television programs and recorded videotapes.
43 V -CHIP Operation Press the MENU button. Press the or button, to select the Setup ( ) icon; then press the SEL ( ) or button. Use the or button to select V-CHIP. Press SEL ( ) or button. SETUP MENU V-CHIP MENU Enter the passwords you have chosen. For initial set-up, use the factory.
44 Press the or button to select the ratings which you wish to block. If you wish to select the MPAA menu, press the button. To change the selected rating, press the or button. (UNBLOCK BLOCK) RATING REMARKS G(general audience) All ages admitted. PG(Parental guidance suggested) Some material may not be suited for children.
45 V -CHIP Operation This procedure allows parents to block programs that contains TV Parental Guide Ratings they consider inappropriate. Content labels are designed to indicate specific contents of TV programs within each TV Parental Guide Rating.
46 TV-Y (All children) This rating is designed to be appropriate for all children. Whether animated or live action, the themes and elements in this program are specifically designed for a very young audience, including from 2~6.
47 V -CHIP Operation TV-14 (D/L/S/V : Parental caution recommended) This rating contains some material that many parents would find unsuitable for children under 14 years of age. Parents are strongly urged to exercise great care in monitoring these programs, and are cautioned against letting children under the age of 14 watch unattended.
48 Display Settings How to Set Up Your Display Setting (for Windows) The Windows display settings for a typical computer are shown below. The actual screens on your PC, however, will probably be different, depending upon your particular version of Windows and your particular video card.
49 Display Settings The LCD TV might operate abnormally if a non-standard video format is selected. The best resolution for this LCD TV is 1024X768 60Hz. This LCD TV provides plug and play capability. Dot x Line Vertical Horizontal DDC Protocol Frequency(Hz) Frequency(KHz) Support 640 X 350 70.
50 Picture Color Adjustment Press the MENU button. Press the or button to select the Picture ( ) icon; then press the SEL ( ) or button. Press the or button to select Custom Mode. Press the or button to select the item you wish to change. Press the or button to adjust the color.
51 Picture Position Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the SEL ( ) or button to select Position ; then press the or buttons to adjust the position of the screen. 1 2 3 Changing the image position Frequency Adjustment Press the MENU button.
52 Phase Adjustment Press the MENU button. Press the or button to select the Setup ( ) icon; then press the SEL ( ) or button. Press the or buttons to select Phase . Press the or button to remove picture noise on the screen. 1 2 3 Adjusting Phase 4 Automatic Quality Adjustment Press the MENU button.
53 Serial Control Using RS-232C Serial Control Using RS-232C Cable (optional) Use RS-232C cable when you control the LCD TV using the PC. This function is called PC Remote Control and is the same as the physical Remote control. It will provide you an additional convenience when you use the LCD TV connected with a PC.
54 Serial Control Using RS-232C Using the Hyper terminal At the connected Hyperterminal Window: File Preference Setup ASCII Setup dialog window 1. Check the two items in the ASCII Sending section. 2. Check the first and third items in the ASCII receiving section.
55 Mode Command Remark Power pwr=0 power off pwr=1 power on Source inp=rf inp=vid inp=svd inp-rgb inp=yuv inp=vga inp=dvi Volume vol=12 Contrast con(rf)=24 Brightness bri(vid)+16 Range 0~31 Color col(.
56 T roubleshooting • Before you call a service technician, please review this list of problems and possible solutions. It may save you time and money. Problems Possible Solution No Power Make sure the power cord is connected to the AC outlet. Make sure the power cord is connected to a wall socket correctly.
57 Specifications Design and specifications are subject to change without notice. Model Name L3040 Panel Size 30.0 inch Diagonal Display Size 29.53" (Diagonal) Type a-si TFT active matrix Pixel pitch 0.5025mm 0.1675mm RGB Viewing Angle 85 (H) / 85 (V) Frequency Horizontal 30 ~ 61 kHz Vertical 56 ~ 85 Hz Display Color 16.
58 MANUFACTURER CODE ANAM 000 001 002 003 004 005 CROWN 076 DAEWOO 110 113 097 056 112 114 117 102 074 107 076 084 053 062 063 FUTURETECH 076 GE 057 058 073 106 LG(GOLDSTAR) 106 104 118 103 100 101 10.
59 MANUFACTURER CODE ANAM 000 001 002 003 004 005 AIWA 066 071 CANNON 060 063 065 DAEWOO 109 114 116 122 082 083 043 040 038 118 093 126 115 EMERSON 039 050 057 059 061 066 067 068 069 073 103 GE 063 .
MANUFACTURER CODE ANAM 000 001 002 APEN 015 025 HARMAN/KARDON 009 JVC 008 KENWOOD 023 LG 005 MEGAVOX 024 MITSUBISHI 019 ONKYO 024 PANASONIC 013 PIONEER 021 014 026 PROSCAN 020 RCA 020 SAMSUNG 004 017 .
61 How to Set Up the Lockout Function Function Remote Key Combination Lock/ Front Key lock on HELP +1 + 0 + 3 Unlock Front Key lock off HELP +1 + 0 + 2 Function Remote Key Combination Power Power on H.
62 APPENDIX Care and Maintenance • With proper care, your LCD TV will give you many years of service. Please follow these guidelines to get the maximum performance from your LCD TV. Identifying Problems • Do not put the LCD TV near extremely hot, cold, humid, or dusty places.
63 Memo.
Memo 64.
KQF1T422Z3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Humax L3040 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Humax L3040 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Humax L3040, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Humax L3040 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Humax L3040, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Humax L3040.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Humax L3040. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Humax L3040 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
