Manuel d'utilisation / d'entretien du produit Portable System du fabricant Huffy
Aller à la page of 22
1 01/05 P/N 211022 © COPYRIGHT 2004 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211022 01/05 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
01/05 P/N 211022 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or an y par t of the system including bac kboard, support braces or net.
4 P/N 211022 01/05 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p arts are p acked inside.
01/05 P/N 211022 5 LEVER 1 2 BROOM HANDLE 201257 3/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position. 2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location.
6 P/N 211022 01/05 Get to know the basic parts of your basketball system..... SUPPOR T STRUT BACKBOARD FRONT RIM BASE POLE.
01/05 P/N 211022 7 * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. WARRANTY CARD: Please remember to complete your product registration form either on-line at: www.
8 P/N 211022 01/05 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) Item #8 (1) Item #1 1 (1) Item #15 (2) Item #32 (2) Item #31 (4).
01/05 P/N 211022 9 Item #46 (1) Item #48 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #33 (2) Item #45 (1).
10 P/N 211022 01/05 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this se.
01/05 P/N 211022 11 1. 2. Correctly identify each pole section and mark indicated distance from ends with t ape as shown. Remove contents from t ank (1).
12 P/N 211022 01/05 4. IMPORT ANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce assembly and lower pole section (6) together as shown until they no longer moved toward taped reference mark.
01/05 P/N 211022 13 5. 6. Install wheel axle (2) through wheel carriage (19) and inst all wheels (3) onto wheel axle (2) with spacers (17) as shown. Insert pole assembly into t ank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
14 P/N 211022 01/05 11 12 12 10 6 6 10 1 10 13 7. Secure base struts (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured ends of base strut s (10) as shown. 8. Secure base struts (10) to base using bolt (15), washers (12), and nut (16).
01/05 P/N 211022 15 Fit spacer (33) into p awl (27). Then continue to assemble as shown. T ighten completely . 9. 33 33 34 35 29 36 27 37 44 Elevator tube T oward Pole T oward Board Identify elevator tubes (43 & 40).
16 P/N 211022 01/05 12 . Secure pawl (27) in place with clevis pin (30) and washers (18) as shown. 13 . S tretch spring (41) into position with pliers. 18 30 18 27 44 29 41 44 USE EYE PROTECTION WHEN INSTALLING SPRINGS. W ARNING! Assemble elevator tubes (44) to ratchet (28) and backboard brackets (29) using bolt s (43), spacers (42.
01/05 P/N 211022 17 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION B: A TT ACH THE BACKBOARD This is what your system will look like when you’ve finished th.
18 P/N 211022 01/05 1. Bend upper halves of backboard brackets (29) to line up with holes in backboard and secure with bolts (32) and nut s (16). Attach rim (21) and plastic sp acer ( ) to board with bolts (31) as shown.
01/05 P/N 211022 19 Support pole on sawhorse. Attach upper and lower elevator tubes (44) to upper pole section (4) using bolt s (43) and nuts (39) as shown. Attach pole cap (22) as shown. 3 . 39 44 44 43 43 39 22 4 44 44 TWO PEOPLE REQUIRED FOR THIS PROCEDURE.
20 P/N 211022 01/05 5. Install net clip s. CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
01/05 P/N 211022 21 Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INST ALLA TION 6.
22 P/N 211022 01/05 7. Roll the completed assembly to the desired playing area. Insert the T -strap (14) through the slot on the back of the base as shown. Secure the unit to ground by twisting the tie down stake (23) into the ground and hooking the T -strap (14) onto the tie down stake (23).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Huffy Portable System c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Huffy Portable System - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Huffy Portable System, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Huffy Portable System va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Huffy Portable System, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Huffy Portable System.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Huffy Portable System. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Huffy Portable System ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
