Manuel d'utilisation / d'entretien du produit ML350e Gen8 du fabricant HP
Aller à la page of 51
The HP ProLiant ML350e Gen8 is a dual processor tower platform, which is built on the latest Intel® Xeon® E5-2400 processors to create unique system architecture. This unique architecture as well as flexible deployment options allow the businesses to scale as needed so they can optimize their IT spending dollars.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Eight-Core Processors NOTE: All support up to 1600MHz DDR3 memory speeds.
Upgradeability Upgradeable to two processors NOTE: Total 8, 12 or 16 cores Up to 12 DIMM slots available for higher memory capacity Up to 24 SFF hard drives or 18 LFF hard drives for expanded storage 4 PCIe 3.
Expansion Slots Expansion Slot # Technology Bus Width Connector Width Bus Number Form Factor Notes 6 PCIe 2.0 x1 X4 0 Half Length/Full Height Activated when installed with Processor 1 5 PCIe 2.0 x4 x8 0 Full- length/Full Height Activated when installed with Processor 1 4 PCIe 3.
System memory, memory map, and memory initialization System hardware configuration (Integrated PCI devices and optional PCIe cards). Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU). NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide: www.
Industry Standard Compliance ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Novell Certified IPMI 2.0, SMASH CLP, DCMI 1.0 compliant Microsoft® Logo certifications USB 2.
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP Power Advisor can be accessed at: www.
On System Management HP iLO Management Engine HP iLO Management Engine is a comprehensive set of embedded management features supporting the complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting and remote support.
HP Insight Management HP Service Pack for ProLiant (SPP) HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) version 5 provide a new, comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime.
Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
HP Insight Management HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
High Performance Clusters HP Cluster Platforms HP Cluster Platforms are specifically engineered, factory-integrated large- scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software.
With HP StoreVirtual VSA you can use the power of virtualization to turn a set of heterogeneous and disconnected physical disk drives in your servers and storage devices into a single pool of logical storage capacity. NOTE: For more information available Storage Software including QuickSpecs, please see: www.
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf HP Installation and Startup for Insight Control Software / HP SIM Provides for the deployment and basic configuration of HP Insight Control or HP SIM (Systems Insight Manager) on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.
Base Models HP ProLiant ML350e Gen8 E5-2407 1P 4GB-U Hot Plug SATA 4LFF 460W PS Base Svr 648376-xx1 Processor (1) Intel® Xeon® E5-2407 (2.2GHz/4-core/80W/10MB) Processor Cache Memory 10MB (1 x 10MB).
Country Code Key Tower Code Key xx=00 US xx=01 Australia xx=03 UK xx=04 Germany xx=05 France xx=29 Japan xx=37 APD xx=42 Europe NOTE: EURO (-421) Models excludes the keyboard.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processors Eight-Core Processors NOTE: All support up to 1600MHz memory speeds. HP ML350e Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) FIO Processor Kit 678905-L21 HP ML350e Gen8 Intel® Xeon® E5-2450 (2.
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit 647907-B21 HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit 669324-B21 HP 8GB.
Step 3: Choose Additional Factory Integratable Options HP Insight Software HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License 582765-B21 Step 4: Choose Ad.
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information. HP Processors Eight-Core Processors NOTE: All support up to 1600MHz memory speeds. HP ML350e Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor Kit 678905-B21 HP ML350e Gen8 Intel® Xeon® E5-2450 (2.
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit 669322-B21 HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit 647907-B21 HP 8GB.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) 6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives HP 1TB 6G SATA 7.
HP 100GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr Warranty Solid State Drive 653122-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.
HP Power Supplies NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator.
NOTE: For additional license options please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/14276_div/14276_div.html NOTE: For more information, visit: http://www.
HP Security HP Trusted Platform Module Option NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
http://h18000.www1.hp.com/products/quickspecs/14341_div/14341_div.html (Smart Array P822 Controller) http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html (Smart Array Advanced Pack) http://h18000.www1.hp.com/products/quickspecs/14343_div/14343_div.
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive EH970A HP Storage Options Converged Network Adapter HP CN1000Q Dual Port Converged Network Adapter BS668A HP CN1100E Dual Port Converged Network Ada.
HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/14110_div/14110_div.html (Worldwide) AF463A NOTE: For additional information on HP Uninterruptible Power Systems please go to: www.
HP Intelligent Power Distribution Units (iPDU) iPDU Core Units HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit AF520A HP 8.
HP USB BFR with PVC Free JP Keyboard/Mouse Kit 631360-B21 HP USB BFR with PVC Free IT Keyboard/Mouse Kit 631362-B21 HP USB BFR with PVC Free CN Keyboard/Mouse Kit 631364-B21 HP USB BFR with PVC Free A.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.
Proactive Care Personalized Support Option NOTE: To add an onsite Account Support Manager (ASM) to Proactive Care. ASM is an assigned resource who delivers support planning and brings technical expertise and best practices advices for the customer's environment.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DDR3 memory population guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator General Guidelines: White DIMM slots denote the first slot of a channel.
Please note: Memory speed is a function of the processor QPI bus speed. * Maximum capacity will vary based on individual server platform qualification schedule ** For HP SmartMemory, UDIMM is supported at 2DPC@DDR3-1333. Third party memory may only support up to 2DPC@DDR3-1066.
Processor 1 Processor 2 slot # population order slot # population order Chnl 1 6 A; 4GB UDIMM 1 A; empty Chnl 1 5 D; empty 2 D; empty Chnl 2 4 B; empty 3 B; empty Chnl 2 3 E; empty 4 E; empty Chnl 3 2.
Processor 1 Processor 2 slot # population order slot # population order Chnl 1 6 A; 8GB RDIMM 1 A; empty Chnl 1 5 D; 8GB RDIMM 2 D; empty Chnl 2 4 B;8GB RDIMM 3 B; empty Chnl 2 3 E; 8GB RDIMM 4 E; emp.
8GB = 8192MB 16GB = 16384MB DDR3 memory options part number decoder Following are memory options available from HP: HP Memory NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit 669322-B21 HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit 647907-B21 HP 8GB.
1-12 12 x 3.5" (LFF) Hot-Plug SAS/SATA hard drive bays NOTE: Optional 2 nd hard drive cage shown in configuration. A Optical Drive B-C Available half-height media bays, for up to two half-height optical/tape drives or a single, full- height tape drive.
External Storage Quantity Supported Position Supported Controller D2600 Disk Enclosure Up to 4 External HP Smart Array P222/512MB FBWC Controller Up to 8 External HP Smart Array P421/1GB FBWC Controll.
LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280 HP SCSI Tape Autoloaders 1/8 G2 Autoloader External HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter 412911-B21 HP SCSI Tape Li.
System Unit Dimensions (H x W x D) (with feet/bezel) 18.19 x 8.58 x 29.13 in (46.2 x 21.8 x 74.0 cm) Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 96.67 lb (43.85 kg) Minimum (one hard drive, power supply, and processor installed) 57.
Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
HP Dynamic Smart Array B120i Controller Dimensions Embedded Disk Drive and Enclosure Interface - Transfer rate Up to 6Gb/s SATA (Serial ATA) SATA Connectors 6 internal connectors with hot plug support Server Interface PCIe 2.
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP ML350e Gen8 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP ML350e Gen8 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP ML350e Gen8, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP ML350e Gen8 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP ML350e Gen8, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP ML350e Gen8.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP ML350e Gen8. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP ML350e Gen8 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
