Manuel d'utilisation / d'entretien du produit PCLA8205B du fabricant HP (Hewlett-Packard)
Aller à la page of 35
EtherExpress TM PRO/10+ ISA PCLA8205B Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 3.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 4.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
Windows for Workgroups Version 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 27 After “Network has been installed on this computer” click on “Finish.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver. 3.5. Driver Name: OEMSETUP.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
.
V ersion Number Intel10 Rev .1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP (Hewlett-Packard) PCLA8205B c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP (Hewlett-Packard) PCLA8205B - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP (Hewlett-Packard) PCLA8205B, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP (Hewlett-Packard) PCLA8205B va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP (Hewlett-Packard) PCLA8205B, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP (Hewlett-Packard) PCLA8205B.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP (Hewlett-Packard) PCLA8205B. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP (Hewlett-Packard) PCLA8205B ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
