Manuel d'utilisation / d'entretien du produit ML370 du fabricant HP (Hewlett-Packard)
Aller à la page of 50
HP ProLiant DL370 G6 (Rack) Front View: Rear View: 1. Quick removal access panel 1. Mouse connector 2. Three Hot-plug fans (standard) Five (optional) 2. Keyboard connector 3. Intel Six or Quad-Core Processor (Performance model includes two processors) 3.
HP ProLiant ML370 G6 (Tower) Front View: Rear View: 1. 9 Available PCI-Express Gen2 slots; PCI-X (optional) 1. PCI-X Expansion slot riser bay 2. Quick removal access panel 2. Four NIC connectors 3. Three Hot-plug fans (standard) Five (optional) 3. Video connector 4.
Entry Models: HP Smart Array P410i/256 MB Controller (RAID 0/1/1+0/5/5+0) NOTE: Entry Models available for ML370 G6 models only. Base Models: HP Smart Array P410i/256 MB Controller (RAID 0/1/1+0/5/5+0.
HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® Processor W5580 (3.
Memory One of the following depending on Model Type DDR3 Registered (RDIMM) or Unbuffered (UDIMM) Standard (Performance Models) 12GB (6 x 2GB) RDIMM Standard (Base Models) 6GB (3 x 2GB) RDIMM Standard.
10 PCIe2 X8 X8 Half length, full height Utilized by NIC controller "Use the correct model number for the NIC" 11 PCI-X See note See note Full Length/Full Height (optional) *Up to 64bits/133Mhz speed when only one device install in slot 11 and 12 *up to 64bits/100Mhz speed when both slot 11 and 12 are utilized.
Interfaces Serial 1 (rear) Pointing Device (Mouse) 1 VGA 1 (+1 front VGA on rack models) Keyboard 1 Network RJ-45 (Ethernet) 4 (rear) ILO 2.0 remote management port 1 SD slot 1 USB 2.0 Ports 5 (2 on the rear, 2 on the front, 1 internal) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.
the business. See www.hp.com/go/ProLiantOA HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
Security Trusted Platform Module Trusted Platform Module option kit The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Common Slot ProLiant It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP offers four Power Supply Options: HP 460Watts, Co.
Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for this server under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters.
Base Rack Models HP ProLiant DL370 G6 E5530 2.40GHz Quad- Core SFF Base Rack Server 487794-xx1 Processor (1) Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) .
PCI-Express Slots 10 slots - (9) available PCI-e Gen2 slots ( NOTE: 10 slots available, one is taken by the NIC riser card ) Power Supply (2) 750W Redundant Hot Plug Power Supplies Insight Control Env.
Country Code Key Tower Code Key Rack Code Key xx=00 U.S. U.S. xx=01 Australia N/A xx=03 UK N/A xx=04 Germany N/A xx=05 France N/A xx=20 Brazil Brazil xx=29 Japan Japan xx=37 A/P A/P xx=42 Europe Europ.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
4U Rack Form Factor Step 2: Choose Required Options (only one of the following from each list) HP Processors NOTE: If High Performance Model features are desired, 2nd processor is included in the Performance Pack part numbers in Step 3 below. Quad-Core Processors Intel® Xeon® Processor W5580 (3.
supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power.
NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information. HP Unique Options (8) Small Form Factor (SFF) 2nd Drive Cage Kit .
HP Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21 HP 4GB 1Rx4 PC3-10600R-9 Kit 593339-B21 HP.
HP 450GB 6G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516816-B21 HP 450GB 3G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 454232-B21 HP 300GB 6G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516814-B21 HP 300GB 3G SAS 15K LFF (3.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13415_div/13415_div.
HP Power Supplies CAUTION: Many HP ProLiant Servers now offer new power options, including Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration.
HP Insight Software HP Insight Control server deployment HP Insight Control server deployment, Electronic License including 1 year of 24x7 Technical Support and Updates T9082AAE HP Insight Control ser.
HP Drive Cage Options (8) Small Form Factor (SFF) 2nd Drive Cage Kit 507803-B21 (6) Large Form Factor (LFF) Backplane Kit 507810-B21 (2) Large Form Factor (LFF) Drive Cage Kit 487936-B21 HP Graphic Options HP ML370 G6 and DL370 G6 Graphic Card Cable Kit NOTE: An option kit will be required per Graphic Card.
http://h18000.www1.hp.com/products/quickspecs/13558_div/13558_div.html (Smart Array P812 Controller) SAS Controller Options HP SAS Expander Card NOTE: For use with the additional 8 SFF drive cage (507803-B21). 468406-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.
HP Tape Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect .
HP StorageWorks D2D4004i Backup System NOTE: 3.0TB (expandable to 7.5TB) of useable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP Disk Storage Systems MSA SAN Storage Arrays HP StorageWorks 60 Modular Smart Array 418408-B21 NOTE: Supports 12 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s. NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.
HP Power Distribution Units HP Monitored Power Distribution Unit: Half Rack Version HP 4.9 kVA S124 Monitored PDU- single input, 1Ø, 24A (NA/JPN) AF914A HP 7.3 kVA S132 Monitored PDU- single input, 1Ø, 32A (INTL) AF915A NOTE: Please see the following QuickSpecs for additional information: http://h18000.
HP Rack Options HP Server Console Switches HP Server console switch 0x2x8 AF616A HP Server console switch 0x2x16 AF617A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.
HP Care Pack Services HP ProLiant ML370 G6 Service & Support Offerings Hardware Services On-site Service 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic U4528E 4-Hour On-site.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". HP ProLiant DL370 G6 Models HP ProLiant ML370 G6 Models DDR3 memory population guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs .
CPU1 CPU2 slot # population order slot # population order Chnl 1 1 G; 8GB DIMM 1 G; empty Chnl 1 2 D; 8GB DIMM 2 D; empty 3 A; 2GB DIMM 3 A; empty Chnl 2 4 H; 8GB DIMM 4 H; empty Chnl 2 5 E; 8GB DIMM .
Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 192GB, consisting of twelve (12) 16GB Quad-Rank PC3-8500 RDIMMs CPU1 CPU2 slot # population order slot # populat.
Following are memory options available from HP: HP Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 50066.
A Removable media bay B SATA DVD-ROM Drive (Standard in all BTO Models) C Optical Drive (blank) 1-8 Eight SFF SAS/SATA HDD Bays (Standard in all BTO Models) A Removable media bay B SATA DVD-ROM Drive .
Drive Support Quantity Supported Position Supported Controller Removable Media Half-Height SATA DVD- ROM Optical Drive Up to 2 A, B Integrated IDE Half-Height SATA DVD RW Optical Drive Up to 2 A, B In.
500GB 6G SAS 7.2K DP Up to 14 1-14 HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller HP Smart Array P411/256 MB Controller HP Smart Array P411/512 MB BBWC Controller SAS Hot Plug LFF (3.
250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 14 1-14 HP Smart Array P212/Zero Memory Controller HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BB.
LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 NOTE: Please check the full compatibility information at: http://www.hp.com/go/connect HP StorageWorks USB Tape Drives DAT 40 DAT 72 DAT 160 DAT 320 Internal or External USB 2.
HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs.
HP 460W Power Supply Part Number - AC 460W PSU 503296-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 200 208 220 230 240 Maximum Rated Output Wattage 460 460 460 460 460 460 460 Nominal Input Current (A rms) 5.
HP 1200W Power Supply Part Number - AC 500172-B21 Operational Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 200 208 220 230 240 Maximum Rated Output Wattage 800 900 1200 1200 1200 1200 1200 Nominal Input Current (A rms) 9.
System Unit Tower Dimensions (H x W x D) (with bezel) 18.52 x 9.75 x 29.12 in (47.04 x 24.77 x 73..96 cm) Rack Dimensions (H x W x D) (with bezel) 6.88 x 19.03 x 27.53 in (17.48 x 48.34 x 69.93 cm) Tower Weight (approximate) Maximum (All hard drives, power supply, and processor installed) 99.
is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Smart Array P410i Controller Dimensions (not including bracket) Low Profile PCIe Form Factor 7.5 in x 9.5 in x 2.25 in (19.05 cm x 24.13 cm x 5.72 cm) Disk Drive and Enclosure Interface - Transfer rat.
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP (Hewlett-Packard) ML370 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP (Hewlett-Packard) ML370 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP (Hewlett-Packard) ML370, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP (Hewlett-Packard) ML370 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP (Hewlett-Packard) ML370, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP (Hewlett-Packard) ML370.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP (Hewlett-Packard) ML370. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP (Hewlett-Packard) ML370 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
