Manuel d'utilisation / d'entretien du produit 3C339 du fabricant HP (Hewlett-Packard)
Aller à la page of 30
TokenLink Velocity PCI Network Interface Card 3C33 9 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name: tlvmp339.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” and press “OK. ” 12 At the “Network” dialogue box, click on the “Identification” folder .
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name : tlvmp339.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE . 8 Specify the settings as listed below : ❒ C:NWCLIEN T ❒ Ye s ❒ Ye s ❒ C:WINDOW S ❒ N o ❒ 3Com Fast E.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8 with Windows 95 SR2 installed . • 3COM 3C 339 Token Ringcard and drivers disk • Windows 95 SR2 media . • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, an d NWLink NetBIOS transfer protocols .
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Insert the 3C339 drivers diskette and set path to “A:” and hit Enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:MASTERSLANDRV3C509B” ) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” 12 and press “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 Requirement s • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 i n - stalled . • 3COM Token Ring 3C339 card and drivers disk ver.
4. Connecting to a Windows NT Server 4. 0 Windows for Workgroups Ver. 3.1 1 ❒ C:WINDOW S ❒ N o 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:NETWARECLIENT.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra VE7/VE8with Windows 95 SR2 . • 3COM TokenRing 3C 339 card and drivers disk • Windows 95 media . • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols .
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 10 In the “Network” dialog box , click on the “Add” button . 11 In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 3.51 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 3.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 i n - stalled . • 3COM 3C339 card and drivers disk • Microsoft Windows NT Workstation 4.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer . 10 Insert the Windows NT Workstation CD. 11 In “Windows NT Setup”, enter the path to your NT files and click on “Continue.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3COM 339 Rev. 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté HP (Hewlett-Packard) 3C339 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du HP (Hewlett-Packard) 3C339 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation HP (Hewlett-Packard) 3C339, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le HP (Hewlett-Packard) 3C339 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le HP (Hewlett-Packard) 3C339, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du HP (Hewlett-Packard) 3C339.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le HP (Hewlett-Packard) 3C339. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei HP (Hewlett-Packard) 3C339 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
