Manuel d'utilisation / d'entretien du produit 399C du fabricant Hayter Mowers
Aller à la page of 40
(English V ersion) FROM SERIAL NO: 398C001001, 399C001001 HANDBOOK: 398016 (REV .0.) ISSUE 21.02.05 OWNER'S HANDBOOK Ranger CODE S 398C 399C (Autodrive) (Autodrive) 4 Speed 398016 (0) 10/3/05 11:38 am Page 1.
Code 398C 399C Engine Briggs & Stratton Quantum XTS 50 Briggs & Stratton Quantum XTS 50 Engine type 12F802 - 1382 - 01 12F802 - 1382 - 01 Engine/Cutterbar speed 2800 rpm 2900 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1.5 litres 1.
1ST Y ear (12 months) W e certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Y ear (12 months) Owner’s Name: Serial Number: Date: 2nd Y ear (24 months) W.
398016 (0) 10/3/05 11:38 am Page 1.4.
1.20 Maintenance Schedule 1.21 - 1.28 Mower Maintenance 1.21 - Engine 1.21 - Thr ottle Cable Adjustment 1.21 - Carbur ettor Adjustments 1.22 - Oil Service 1.22 - Air Cleaner Service 1.23 - Spark Plug Service 1.23 - Keeping Engine Clean 1.23 - Grassbag 1.
Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications.
W ARRANTY 1.7 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie.
SAFETY PRECAUTIONS 1.8 This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used corr ectly . Failure to observe the following precautions may r esult in serious injury .
PRECAUTIONS SAFETY 1.9 - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot.
SAFETY PRECAUTIONS 1.11 Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration.
ASSEMBLING THE MOWER 1.12 Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. Grassbag. 3. Owners Handbook T o prevent accidents cut off the long ribbon attached to the grass- bag and discard.
MOWER THE ST AR TING 1.13 T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 oil.
Controls Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position.
MOWER THE OPERA TING 1.15 (Autodrive Only) Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas.
1.16 T o prevent engine damage do not use the mower on slopes greater than 20 degrees. Grip the lever and pull sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the nine notch settings.
1.17 Remove the grassbag and operate the mower with the rear deflector in the closed position. Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting.
1.18 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary .
1.19 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow .
1.20 T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . Follow the hourly or calendar intervals, whichever occurs first.
1.21 T o prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance pr oce- dures on the mower . 1.
1.22 CS085 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1.
1.23 RIGG S & STRAT T ON E R 1 Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer .
1.24 Remove grass debris from the top and underside of the deck housing immediately after use. T o prevent accidents fertilisers and top dr essings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and stor e well away from corrosive materials.
1.25 If the speed difference between the settings on the speed change con- trol are judged to be too little or do not exist at all it may be necessary to adjust the cable. 1. Run the mower in the position for a few minutes. 2. If there is any play in the cable by nipple Y the cable must be adjust- ed.
1.26 Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. T urn the mower on its left hand side and ensure that the air clean- er side of the engine is uppermost.
30 ° -45 ° 1.27 Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water .
MOWER MAINTENANCE T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to be pivoted forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being dam- aged through contact with the engine spark plug.
1.29 PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released Operate engine stop lever Incorrect oil level Check oil level Obstruction under deck Remove obstruction Engine.
1.30 PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively . Mounting bolts loose. Tighten bolts. Cutterbar bolt loose. T ighten bolt. Cutterbar out of balance. Balance cutterbar . Uneven cut. Undulating ground contours. Change direction of travel.
CONFORMITY OF DECLARA TION 1.31 VIBRA TION INFORMA TION The Lawnmower V ibration level at the operator contact position, measured in accordance with Euopean Standard EN836-Handlebars.
1 Mainframe - 48 397039V 1 0 Mainframe - 53 399020V 0 1 2 Height Adjust Quadrant 397028 1 1 3 Cover - Black 397037 1 0 Cover - Black 399019 0 1 4 Engine-B+S Quantum XTS 50 397047 1 1 5 Decal - Caution.
1.33 LIST PA R T S ITEM NO. 38 Grip Fix 09773 0 0 39 Rear Attachment 397027 1 1 40 Bolt - Coach 09766 2 2 41 Attachment Plate 397018 2 2 42 Spring 397033 1 1 43 Handlebar Attachment 397017 2 2 44 Scre.
1.34 PA R T S LIST ITEM NO. 77 Support W asher 398006 2 2 78 Lever Clutch 306094 1 1 79 Clip E 09767 2 2 80 T ension Spring 398008 1 0 Bracket 399022 0 1 81 V Belt 398011 1 0 V Belt 399024 0 1 82 Belt.
4P398C02B 25 25 24 24 88 26 27 27 28 22 21 23 20 19 18 15 15 18 17 17 10 10 29 78 19 36 35 37 10 10 39 66 66 46 46 9 9 8 11 11 11 30 31 32 14 13 87 16 7 43 49 50 51 61 71 67 72 53 44 52 47 73 73 74 74.
4P398C02B 25 25 24 24 88 26 27 27 28 22 21 23 20 19 18 15 15 18 17 17 10 10 29 78 19 36 35 37 10 10 39 66 66 46 46 9 9 8 11 11 11 30 31 32 14 13 87 16 7 43 49 50 51 61 71 67 72 53 44 52 47 73 73 74 74.
398016 (0) 10/3/05 11:38 am Page 1.37.
1.38 Notes:- NOTES 398016 (0) 10/3/05 11:38 am Page 1.38.
1.39 NOTES Notes:- 398016 (0) 10/3/05 11:38 am Page 1.39.
Serial No: Motor T ype:- 127F802-1382-01 (Code 398C) Engine T ype Briggs & Stratton Quantum XTS 50 Motor T ype:- 127F802-1382-01 (Code 399C) Engine T ype Briggs & Stratton Quantum XTS 50 Date of Sale:- Y our Local Dealer:- 1.40 CUST OMER INFORMA TION 398016 (0) 10/3/05 11:38 am Page 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hayter Mowers 399C c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hayter Mowers 399C - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hayter Mowers 399C, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hayter Mowers 399C va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hayter Mowers 399C, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hayter Mowers 399C.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hayter Mowers 399C. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hayter Mowers 399C ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
