Manuel d'utilisation / d'entretien du produit AVR 310 du fabricant Harman-Kardon
Aller à la page of 56
A VR 310 Audio/ V ideo Receiver OWNER’S MANU AL • HALL 1 • HALL 2 • THEATER • VMAx • LOGIC 7 • SURR. OFF • • • • • 5CH STEREO DIGITAL PRO LOGIC 3 STEREO AVR 310 Test Tone Speaker Channel Digital Select Delay • VID 1 • VID 2 • VID 3 • VID 4 • DVD • CD • TAPE • FM • AM • 6 CH.
2 T ABLE OF CONTENTS 3 Introduction 4 Safety Information 4 Unpacking 5 F ront Panel Controls 7 F ront Panel Information Display 9 Rear P anel Connections 11 Main Remote Control Functions 14 Zone II Re.
3 INTRODUCTION Introduction Thank you for choosing Harman Kardon! With the purchase of a Harman Kardon A VR 310 you are about to begin many years of listening enjoyment. T he A VR 310 has been custom-designed to provide all the excitement and detail of movie soundtracks and every nuance of musical selections .
4 SAFETY INFORMA TION Safety Information Important Safety Information V erify Line V oltage Before Use Y our A VR 310 has been designed for use with 120-volt AC current. Connection to a line volt- age other than that for which it is intended can create a safety and fire hazard and may damage the unit.
5 FRONT P ANEL CONTROLS 1 Main P ower Switch: Press this button to apply power to the A VR 310. When the switch is pressed in, the unit is placed in a Standby mode , as indicated by the amber LED 3 sur- rounding the System P ower Control 2 . T his button MUST be pressed in to operate the unit.
6 FRONT P ANEL CONTROLS Front P anel Controls 7 Surround Mode Selector: Press this but- ton to change the surround mode by scrolling through the list of available modes . Note that depending on the type of input, some modes are not always av ailable .
7 FRONT P ANEL INFORMA TION DISPLA Y Front P anel Information Display COAXIAL THEATER 5 CH STEREO HALL 12 3 - STEREO PRO LOGIC DIGITAL DTS DOLBY D PCM MP3 NIGHT MULTI OPTICAL ANALOG OSD LFE 0 C L 0 1 2 3 1 2 3 MEMORY PRESET SLEEP AUTO 5.
8 FRONT P ANEL INFORMA TION DISPLA Y Front P anel Information Display will light to display the channels being received at the digital input. When the letters flash, the digital input has been interrupted. (See page 28 for more information on the Channel Indicators .
9 REAR P ANEL CONNECTIONS Rear P anel Connections AC INPUT ~120V/60HZ A R CU S LISTED E191351 40KK AUDIO EQUIPMENT TAPE MULTI OUT FRONT SPKRS (8 Ω ) RIGHT LEFT CENTER SPKR (8 Ω ) PRE OUT 6 CH. DIRECT INPUT ANTENNA DIGITAL IN DIGITAL OUT VID 3 VID 3 MULTI REMOTE VID 2 VID 2 OPT OPT COAX COAX VID 1 VID 1 DVD DVD CD MON.
10 REAR P ANEL CONNECTIONS Rear P anel Connections ¡ T ape Inputs: Connect these jacks to the PLA Y/OUT jacks of an audio recorder . ™ T ape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder . £ Video 1 Audio Inputs: Connect these jacks to the PLA Y/OUT audio jacks on a VCR or other video source .
11 MAIN REMO TE CONTROL FUNCTIONS ● ● ● ● ● ● ● ● ● ● ● ● Main Remote Control Functions POWER MUTE AVR AM/FM VCR 6 CH. OFF ON SLEEP T/V SURR. M-ROOM CH. G U I D E C H . E X I T D I G I T A L M E N U S P K R P R E V . C H . D E L A Y SET TUN-M MEM D.
12 MAIN REMO TE CONTROL FUNCTIONS Main Remote Control Functions IMPORT ANT NO TE: The A VR 310 ’ s remote may be programmed to control up to eight devices , including the A VR 310. Before using the remote , it is important to remember to press the Input Selector button e that corresponds to the unit you wish to operate .
13 MAIN REMO TE CONTROL FUNCTIONS t Direct Button: Press this button when the tuner is in use to start the sequence for direct entry of a station ’ s frequency . After press- ing the button simply press the proper Numeric K eys r to select a station.
14 ZONE II REMO TE CONTROL FUNCTIONS Zone II Remote Control Functions å P ower Off ∫ A VR Selector ç AM/FM T uner Select ∂ Input Selectors ≠ T uning Up/Down – F ast Play ƒ Record/P ause © .
System Installation After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to mak e the connections to your audio and video equipment.
16 INST ALLA TION AND CONNECTIONS Installation and Connections Video Connection Note: • Composite and S-Video signals may only be viewed in their native formats . S-Video inputs may only be viewed when the A VR 310 is connected to a TV set or video display with S-Video capability .
17 SY STEM CONFIGURA TION System Configuration When all audio , video and system connections have been made , there are a few configuration adjustments that must be made . A few minutes spent to correctly configure and calibrate the unit will greatly add to your listening experience .
18 SY STEM CONFIGURA TION 2. Press the Main P ower Switch 1 in until it latches and the word “ OFF ” on the top of the switch disappears inside the front panel. Note that the Power Indicator 3 will turn amber , indicating that the unit is in the Standby mode .
19 SY STEM CONFIGURA TION System Configuration Input Setup T he first step in configuring the A VR 310 is to select an input. T his may be done by pressing the front panel Input Source Selector ! unti.
20 SY STEM CONFIGURA TION Note that the data lines next to the items in the screen display will show either numbers or a series of dashes , depending on whether or not the specific parameter is adjustable .
21 SY STEM CONFIGURA TION System Configuration MAX : When MAX is highlighted, a more severe compression algorithm will be applied. We recommend that you select the MID setting as a starting point and change to the MAX setting later , if desired.
If the front left/right speak ers are set to LARGE , three options are available: • If no subwoofer is connected to the A VR 310, press the ‹ / › buttons o on the remote so that NONE appears in the on-screen menu. When this option is selected, all bass information will be routed to the front left/right “ main ” speakers .
23 SY STEM CONFIGURA TION System Configuration Before beginning the output level adjustment process , mak e certain that all speaker connec- tions have been properly made . The system volume should be set to the level that you will use during a typical listening session.
24 SY STEM CONFIGURA TION System Configuration Continue to adjust the individual channels until the volume level sounds the same from each speak er . Note that adjustments should be made with the ‹ / › buttons o on the remote only , NO T the main volume controls.
25 OPERA TION Operation Basic Operation Once you have completed the setup and configuration of the A VR 310, it is simple to operate and enjoy . T he following instructions will help you maximize the .
26 OPERA TION Operation MODE FEA TURES DELA Y TIME RANGE DOLBY DIGIT AL Available only with digital input sources encoded with Dolby Digital data. It provides Center: 0 ms – 5 ms up to five separate main audio channels and a special dedicated Low-F requency Effects Initial Setting – 0 ms channel.
27 OPERA TION Operation Surround Mode Selection One of the most important features of the A VR 310 is its ability to reproduce a full multichannel surround-sound field from digital sources , analog matrix surround-encoded programs and standard stereo progr ams .
28 OPERA TION Operation source is playing, the A VR 310 will automat- ically detect whether it is a multichannel Dolby Digital, DTS source, MP3 or a conventional PCM signal, which is the standard output from CD players .
29 OPERA TION Operation that some future digital sources may not be com- patible with the A VR 310. 3. Note that not all digitally encoded programs contain full 5.1-channel audio . Consult the pro- gram guide that accompanies the DVD or laser disc to determine which type of audio has been recorded on the disc.
30 OPERA TION Operation NO TE: When the FM reception of a station is weak, audio quality will be increased by switching to Mono mode by pressing the FM Mode button @ s until the STEREO indicator V goes out.
31 OPERA TION Operation Repeat the procedure as needed until all chan- nels requiring adjustment have been set. When all adjustments have been made and no further adjustments are made for five seconds , the A VR 310 will return to normal operation. T he channel output for any input may also be adjusted using the full-OSD on-screen menu system.
32 ADV ANCED FEA TURES Advanced Featur es T he A VR 310 is equipped with a number of advanced features that add extr a flexibility to the unit ’ s operation. While it is not necessary to use these features to operate the unit, they provide additional options that you may wish to use .
33 ADV ANCED FEA TURES Advanced Featur es turned off , the semi-OSD displays will remain activated, even if they were switched off for the previous listening session.
T he A VR 310 is fully equipped to operate as the control center for a multiroom system with optional remote external Infrared (IR) sen- sors , speakers and power amplifiers .
35 PROGRAMMING THE REMO TE Progr amming the Remote T he A VR 310 is equipped with a powerful remote control that will control not only the receiver ’ s functions, but also most popular brands of audio and video equipment, including CD players , cassette decks , TV sets, cable boxes , VCRs , satellite receivers and other home-theater equipment.
36 PROGRAMMING THE REMO TE Progr amming the Remote Learning Codes In addition to using codes from the remote ’ s internal code library , the A VR 310 ’ s remote is able to “ learn ” codes from remotes that may not be in the code library .
37 PROGRAMMING THE REMO TE Progr amming the Remote NO TE: While entering commands for Power On/Off of any device during a macro sequence , press the Mute button . DO NO T press the actual P ower button. 3. When all the steps have been entered, press the Sleep button j to enter the commands .
38 PROGRAMMING THE REMO TE Progr amming the Remote Note that the numbers used to describe the but- ton functions at the left for the purposes of describing how a button operates are a different set of numbers than those used in the rest of this manual to describe the button functions for the A VR 310.
39 PROGRAMMING THE REMO TE Progr amming the Remote Reassigning Device Control Selectors Although each Input Selector e is normally assigned to the category of product shown on the remote , it is possible to reassign one of these but- tons to operate a second device of another type .
40 FUNCTION LIST Function List No . Button Name AVR Function DVD CD/CDR T ape VCR (VID 1) TV (VID 1) CBL (VID 3) SA T(VID 3) 1 P ower Off P ower Off P ower Off P ower Off P ower Off P ower Off P ower .
41 FUNCTION LIST Function List 45 T une Up T une Up Next Chapter 46 Direct Direct T uner Entry T r ack Direct 47 Clear Clear Clear Clear Clear Clear Clear Clear 48 Preset Up Preset T une Up Slow F orward 49 T une Down T une Down Prev Chapter T r ack Increment 50 OSD OSD OSD OSD OSD OSD 51 D .
42 SETUP CODES Setup Code T able: TV Manufacturer/Brand Setup Code Number A MARK 103 132 ADMIRAL 192 AKAI 001 160 AMPRO 070 164 AMSTRAD 053 ANAM 045 055 057 076 095 099 103 106 109 112 122 AOC 001 011.
43 SETUP CODES Setup Code T able: TV (continued) MIDLAND 199 MINERV A 084 MITSUBISHI 001 011 030 033 042 044 100 107 115 154 160 167 168 MTC 175 176 NAD 021 031 NA TIONAL 177 178 179 180 181 182 NEC 0.
44 SETUP CODES Setup Code T able: VCR Manufacturer/Brand Setup Code Number AIWA 040 AKAI 022 048 050 108 109 126 AMPRO 076 AMSTRAD 133 ANAM 037 039 089 ASA 134 A UDIO DYNAMICS 018 029 044 048 BROKSONI.
45 SETUP CODES Setup Code T able: VCR (continued) NORDMENDE 048 OPTIMUS 159 OPT ONICA 057 058 ORION 147 166 P ANASONIC 070 074 078 086 114 125 150 167 172 PENT AX 019 026 037 039 067 PHILCO 037 039 04.
46 SETUP CODES Setup Code T able: CD Manufacturer/Brand Setup Code Number ADC 012 ADCOM 049 063 069 AIWA 072 111 118 156 170 AKAI 050 177 184 A UDIO TECHNICA 053 A UDIOACCESS 125 A UDIOFILE 211 BSR 04.
47 SETUP CODES ONKY O 037 038 045 046 171 175 202 203 OPTIMUS 020 036 056 057 064 065 089 090 091 092 096 099 104 212 P ANASONIC 015 075 109 119 158 183 204 PHILIPS 039 051 138 149 209 PIONEER 017 036.
48 SETUP CODES Setup Code T able: Audio Setup Code T able: T ape Manufacturer/Brand Setup Code Number HARMAN KARDON 001 Manufacturer/Brand Setup Code Number HARMAN KARDON 001 Setup Code T able: DVD Ma.
49 SETUP CODES Setup Code T able: SA T Manufacturer/Brand Setup Code Number ALPHAST AR 472 ALPHAST AR DBS 450 ALPHAST AR DSR 422 442 AMPLICA 356 BIRDVIEW 414 425 BSR 359 CAPETRONICS 359 CHANNEL MASTER.
50 SETUP CODES Setup Code T able: CBL Manufacturer/Brand Setup Code Number ABC 001 003 011 045 048 052 059 110 ALLEGRO 111 AMERICAST 212 ANTRONIX 021 ARCHER 012 014 021 031 112 BELCOR 113 CABLE ST AR .
51 SETUP CODES Setup Code T able: CBL (continued) PULSAR 058 RADIO SHACK 111 112 213 RCA 053 214 RECO TON 116 REGAL 055 056 061 099 100 101 207 REGENCY 063 115 REMBRANT 032 SAMSUNG 037 072 186 SCIENTI.
52 TROUBLESHOO TING GUIDE T r oubleshooting Guide SYMPT OM CAUSE SOLUTION Unit does not function when Main • No AC P ower • Mak e certain A C power cord is plugged into P ower Switch is pushed a l.
53 TECHNICAL SPECIFICA TIONS T echnical Specifications Audio Section Stereo Mode Continuous Average P ower (FTC) 60 W atts per channel, 20Hz – 20kHz, @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Modes P ower Per Individual Channel F ront L&R channels: 50 W atts per channel @ < 0.
54 NO TES Notes.
55 NO TES Notes.
250 Crossways P ark Drive, Woodbury , New Y ork 11797 www .harmankardon.com © 2000 Harman Kardon, Incorporated P art No .: J90200012200.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Harman-Kardon AVR 310 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Harman-Kardon AVR 310 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Harman-Kardon AVR 310, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Harman-Kardon AVR 310 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Harman-Kardon AVR 310, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Harman-Kardon AVR 310.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Harman-Kardon AVR 310. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Harman-Kardon AVR 310 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
