Manuel d'utilisation / d'entretien du produit 69774 du fabricant Harbor Freight Tools
Aller à la page of 24
.
Page 2 For technical questions, please call 1-800-520-0882. ITEM 69774 T able of Contents Specifications ............................................. 2 Safety ......................................................... 4 Setup .........................
Page 3 For technical questions, please call 1-800-520-0882. ITEM 69774 W ARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Page 4 For technical questions, please call 1-800-520-0882. ITEM 69774 Safety W arnings W ARNING! Read all instructions. Failure to follow all instructions listed below may result in fire, serious injury and/or DEA TH. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur .
Page 5 For technical questions, please call 1-800-520-0882. ITEM 69774 12. Stay alert, watch what you are doing and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication.
Page 6 For technical questions, please call 1-800-520-0882. ITEM 69774 Set Up Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJUR Y : Operate only with proper spark arrestor installed.
Page 7 For technical questions, please call 1-800-520-0882. ITEM 69774 Connecting Hoses Note: Hose coupling components and hoses not included. Note: The Suction Hose (not included) MUST be reinforced with braided material or have non-collapsible construction.
Page 8 For technical questions, please call 1-800-520-0882. ITEM 69774 5. For the discharge hose, slide a Hose Coupling Ring over the remaining Hose Coupler (a) and place a Gasket onto the end of the Hose Coupler (b). a b 6. Thread the Hose Coupling Ring clockwise onto the Discharge Port until tightened securely .
Page 9 For technical questions, please call 1-800-520-0882. ITEM 69774 Locating the W ater Pump Locate the W ater Pump on a flat, level, sturdy surface capable of supporting the weight of the Pump. 1. For best Pump performance, place the Pump near the water level and use hoses that are no longer than necessary .
Page 10 For technical questions, please call 1-800-520-0882. ITEM 69774 Operation Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 1 1 For technical questions, please call 1-800-520-0882. ITEM 69774 Starting the Engine 1. T o start a cold engine, move the Choke to the CHOKE position. T o restart a warm engine, leave the Choke in the RUN position. 2. Open the Fuel V alve. 3. Slide the Throttle to 1/3 away from the SLOW position (the “turtle”).
Page 12 For technical questions, please call 1-800-520-0882. ITEM 69774 8. Break-in Period: a. Breaking‑in the engine will help to ensure proper equipment and engine operation. b. The operational break‑in period will last about 3 hours of use. During this period: • Do not apply a heavy load to the equipment.
Page 13 For technical questions, please call 1-800-520-0882. ITEM 69774 Maintenance and Service W ARNING TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL ST ARTING: T urn the Power Switch of the equipment .
Page 14 For technical questions, please call 1-800-520-0882. ITEM 69774 Checking and Filling Fuel W ARNING! TO PREVENT SERIOUS INJUR Y FROM FIRE: Fill the fuel tank in a well‑ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before adding fuel.
Page 15 For technical questions, please call 1-800-520-0882. ITEM 69774 Air Filter Element Maintenance 1. T o remove the air filter cover , push in and lift up on the Filter Cover T ab, pivoting the cover at the Base Hinge. Remove the filter and check for dirt.
Page 16 For technical questions, please call 1-800-520-0882. ITEM 69774 Storage When the equipment is to remain idle for longer than 20 days, prepare the engine for storage as follows: 1. CLEANING : W ait for engine to cool, then clean engine with dry cloth.
Page 17 For technical questions, please call 1-800-520-0882. ITEM 69774 Pump T roubleshooting Problem Possible Causes Likely Solutions Pump overheats 1. Incorrect lubrication or not enough lubrication. 2. Worn parts. 1. Lubricate using recommended oil or grease according to directions.
Page 18 For technical questions, please call 1-800-520-0882. ITEM 69774 Engine T roubleshooting Problem Possible Causes Probable Solutions Engine will not start FUEL RELA TED: 1. No fuel in tank or fuel valve closed. 2. Choke not in CHOKE position, cold engine.
Page 19 For technical questions, please call 1-800-520-0882. ITEM 69774 Problem Possible Causes Probable Solutions Engine misfires 1. Spark plug cap loose. 2. Incorrect spark plug gap or damaged spark plug. 3. Defective spark plug cap. 4. Old or low quality gasoline.
Page 20 For technical questions, please call 1-800-520-0882. ITEM 69774 W arranties Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality .
Page 21 For technical questions, please call 1-800-520-0882. ITEM 69774 Harbor Freight T ools Emission Control Defects W arranty Provisions 1. Length of Coverage HFT warrants to a first retail purchas.
Page 22 For technical questions, please call 1-800-520-0882. ITEM 69774 Parts Lists and Diagrams Parts List Part Description Qty 1 Gasket, Cylinder Head 1 2 Cover Subassembly , Cylinder Head 1 3 Gaske.
Page 23 For technical questions, please call 1-800-520-0882. ITEM 69774 Assembly Diagram Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 520-0882.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Harbor Freight Tools 69774 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Harbor Freight Tools 69774 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Harbor Freight Tools 69774, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Harbor Freight Tools 69774 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Harbor Freight Tools 69774, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Harbor Freight Tools 69774.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Harbor Freight Tools 69774. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Harbor Freight Tools 69774 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.