Manuel d'utilisation / d'entretien du produit G8690 du fabricant Grizzly
Aller à la page of 24
VARIABLE SPEED WOOD LATHE MODEL G8690 INSTRUCTION MANUAL COPYRIGHT © 1999 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REPRINTED JUNE, 2001 PRINTED IN TAIWAN.
.
G8690 Variable Speed Wood Lathe -1- Table Of Contents PAGE 1. SAFETY SAFETY RULES FOR ALL TOOLS ......................................................................2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR G8690 ........................................
-2- G8690 Variable Speed Wood Lathe Safety Instructions For Power Tools SECTION 1: SAFETY 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.
G8690 Variable Speed Wood Lathe -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
-4- G8690 Variable Speed Wood Lathe No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect.
G8690 Variable Speed Wood Lathe -5- 110V Operation SECTION 2: CIRCUIT REQUIREMENTS The lathe comes equipped with its own fuse rated at 3.15 amps. Never replace the fuse with one rated higher than 3.5 amps. If you find it necessary to use an extension cord with the Model G8690, make sure the cord is rated Hard Service (grade S) or better.
-6- G8690 Variable Speed Wood Lathe SECTION 3: INTRODUCTION We are proud to offer the Grizzly Model G8690 Variable Speed Wood Lathe. The Model G8690 is part of a growing Grizzly family of fine woodwork- ing machinery.
G8690 Variable Speed Wood Lathe -7- Unpacking This wood lathe is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for deliv- ery, and the truck and driver are gone, you will need to file a freight claim with the carrier.
-8- G8690 Variable Speed Wood Lathe Clean Up The unpainted surfaces are coated with a waxy oil to protect them from corrosion during shipment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser.
G8690 Variable Speed Wood Lathe -9- SECTION 4: ASSEMBLY Beginning Assembly Most of your Model G8690 has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here.
-10- G8690 Variable Speed Wood Lathe Tailstock Figure 5. Tailstock mounted to guide rails. The tailstock rests on the guide rails and is held in place by the tailstock bracket using a double end screw (M12-1.75 x 65), washer and handle. The tailstock can be adjusted along the length of the guide rails to accommodate various lengths of wood stock.
G8690 Variable Speed Wood Lathe -11- Spur Center The Model G8690 is supplied with a #1 Morse Taper spur center for use when spindle turning. The spur center is used in conjunction with the tailstock live center. Install the spur center by inserting it into the hole in the headstock spindle end.
-12- G8690 Variable Speed Wood Lathe SECTION 5: OPERATIONS Once assembly is complete and adjustments are done to your satisfaction, you are ready to test run the machine. Press the START button. Make sure that your fin- ger is poised on the STOP button, just in case there is a problem.
G8690 Variable Speed Wood Lathe -13- Do not press too firmly or the bearings will bind and overheat. Likewise, do not adjust too loosely or the workpiece will spin off the lathe. Use good judgement. Serious personal injury could result if care is not taken.
-14- G8690 Variable Speed Wood Lathe Adjust the tool rest as close to the workpiece as possible without actually coming into contact with the workpiece. Test by hand-turning the work- piece before turning the lathe on. Ensure that the lathe chisel is fully supported by the tool rest.
G8690 Variable Speed Wood Lathe -15- SECTION 7: MAINTENANCE Lubrication Since all bearings are shielded and permanently lubricated, simply leave them alone until they need to be replaced. Do not lubricate them. Regular periodic maintenance on your Model G8690 will ensure its optimum performance.
-16- G8690 Variable Speed Wood Lathe The following pages contain general machine data, parts diagrams/lists, troubleshooting guide and Warranty/Return information for your Model G8690. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call our Service Department.
G8690 Variable Speed Wood Lathe -17- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MACHINE DATA SHEET Design Type.........................................................................................
.
G8690 Variable Speed Wood Lathe -19- Ref# Part# Description 001 PS05M PHLP HD SCR M5 X 8 002 PW02M FLAT WASHER M5 003 P8690003 PROTECTING PLATE 004 PS08M PHLP HD SCR M5 X 12 005 P8690005 RUBBER SHEATH.
-20- G8690 Variable Speed Wood Lathe Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
G8690 Variable Speed Wood Lathe -21- 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini .
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Grizzly G8690 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Grizzly G8690 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Grizzly G8690, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Grizzly G8690 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Grizzly G8690, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Grizzly G8690.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Grizzly G8690. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Grizzly G8690 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
