Manuel d'utilisation / d'entretien du produit FirePro W600 2GB du fabricant AMD
Aller à la page of 38
AMD FirePro W600 User Guide Part Number: 51633_enu_1.0.
© 2012 Advanced Micro Devices Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products.
Important Safety Instructions Note: This product is for use only with compatible UL-listed personal computers that have installation instructions detailing user installation of this class of product. Read all instructions before beginning installation.
iv AMD FirePro W600 © 2012 Advanced Micro Devices, Inc..
Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.4 Surface Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Getting Started Before you begin installing your new AMD FirePro W600 graphics card, please make sure you have the proper system requirements and have completed the required preinstallation tasks as outlined in this chapter.
6. Install the AMD FirePro drivers and configuration software from the AMD Installation disc. 1.3 Before You Begin Installation Once you have determined that your system meets the minimum requirements, please perform the following tasks before installing your AMD FirePro W600 workstation graphics card.
2. Click Start ▷ Control Panel . Double-click Programs and Features and then select the graphics card driver from the list of software programs. 3. Double-click Hardware and Sound and then double-click Device Manager . 4. Expand Display Adapter and then right-click the driver for the graphics card you are replacing.
4 Getting Started AMD FirePro W600 © 2012 Advanced Micro Devices, Inc..
Chapter 2 Hardware Installation This chapter details how to install your AMD FirePro W600 card in your system. Note: AMD recommends that you install/upgrade all AMD FirePro hardware products in your system before you install/upgrade your drivers and the AMD Accelerated Parallel Processing (APP) Software Development Kit (SDK).
4. Unscrew or unfasten and remove any existing graphics card from your computer, if necessary. Caution: Make sure the PCIe card slot-locking mechanism is unlocked or open before trying to remove a graphics card. Failure to do so may damage the card and/ or the motherboard.
If you have properly installed your graphics card, operating system messages will appear and the boot procedure will proceed. Your monitor will be running in a basic (VGA) video mode. Higher refresh rates are not available at this stage of the installation.
Display Configuration Card Connection Used Comments Mini DisplayPort display Mini DisplayPort connection DisplayPort display Mini DisplayPort connection with Mini DisplayPort-to- DisplayPort connectio.
Table 2–1 Sample Display Configurations Sample Display Configuration mDP Connector mDP Connector mDP Connector mDP Connector mDP Connector mDP Connector Total Output mDP-mDP- mDP-mDP- mDP-mDP Native.
Use the following procedure to attach a display using an adapter. 1. Turn off your computer and monitor. 2. Plug the adapter into the connection from your AMD FirePro card and tighten the thumbscrews (if there are any). 3. Connect your display's cable to the adapter and tighten the thumbscrews (if there are any).
Chapter 3 Drivers and Software Installation This chapter describes the installation of the drivers and software associated with your AMD FirePro workstation graphics card. 3.1 AMD Drivers and Software Drivers are small but important programs that enable an operating system to communicate with a piece of hardware, such as a graphics card.
c. Select Browse and select setup.exe from the folder in which you have saved the driver download. setup.exe appears in the Open field of the Run dialog. d. Click OK . Note: The User Account Control dialog may appear; if so, click Continue . The Catalyst Install Manager dialog may prompt you to close all open applications; if so, do so.
Chapter 4 Using the Control Center Software 4.1 Control Center Overview The Control Center software application contains settings for configuring and fine- tuning your AMD product.
Table 4–1 Control Center Access Routes Access Route Instructions Windows® Desktop 1. Right-click anywhere on the desktop. 2. From the shortcut menu that appears, click the Control Center option. Windows Start Menu 1. Click Start on the Windows task bar.
1. Open Catalyst Pro Control Center in the Advanced view. Note: For more information, see Starting the Control Center Software (p. 13) . 2. Select the Desktops & Displays page. The Desktops & Displays page is the central location for configuring displays and arranging desktops (the workspace shown on a display).
16 Using the Control Center Software AMD FirePro W600 © 2012 Advanced Micro Devices, Inc..
Chapter 5 Reference This chapter provides notices, troubleshooting tips, and customer care, warranty, and standards-compliance information. 5.1 Workstation Card Troubleshooting The following troubleshooting tips may help if you experience problems. More troubleshooting information can be found on the AMD Web site http:// support.
Make sure that the display resolution and refresh rate settings you have selected are supported by the monitor you have connected. 5.1.3 There are screen defects. Make sure your monitor supports the resolution and horizontal (kHz) and vertical (Hz) refresh rates as required by the graphics card.
You cannot change the addresses of your AMD FirePro card. In case of an address conflict, try to modify the I/O address of the add-on card that causes the conflict. To support the special graphics processor on the AMD FirePro card, the system BIOS should automatically assign a system interrupt to the slot where the card is installed.
Country Telephone Number Language/Times Notes Italy 800-877-224 Italian/English: 10:30 - 17:00 CET (Mon-Fri) Complimentary for registered users. Toll-free. Germany +49 (0)89-4505-3199 German/English: 10:30 - 17:00 CET (Mon-Fri) Complimentary for registered users.
AMD Customer Care is unable to assist with refunds, returns, or exchange-specific inquiries. If resolving the problem being experienced is critical to your decision to keep the product, it is your responsibility to ensure that you know and are within the period of time your reseller will allow for refunds, returns, or exchange.
warranties or conditions, shall be implied by statute or otherwise. In no event shall AMD be responsible or liable for any damages, including but not limited to the loss of revenue or profit, arising:.
Warning: Changes or modifications to this device not expressly approved by Advanced Micro Devices, Inc. could void the user's authority to operate the equipment. FCC Part 15, Subpart B, Class A Class B This product complies with FCC Rules Part 15.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada. Class B This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. 5.5.3 CE Compliance Information (European Union) Class A Warning: This is a Class A product.
5.5.5 VCCI ITE Compliance Information (Japan) Class A Translation: This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions.
5.5.6 KC Certification Information (Korea) Class A Translation: "Class A" Equipment (Business purpose info/telecommunications equipment) As this equipment has undergone EMC registration for .
Translation: This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. CNS13438 Class B CNS13438 5.5.
For information on China RoHS, EU RoHS, or EU REACH compliance, please refer to Product Environmental Compliance on the AMD Web site. 5.5.10 Waste Electrical and Electronic Equipment (WEEE) Directive Compliance (European Union) This product was manufactured by Advanced Micro Devices, Inc.
Appendix A Glossary - Workstation Products 2D Acronym for “two dimensional,” a term applied to computer graphics that are “flat.” Typical desktop applications such as word processors, spreadsh.
CRT Acronym for “cathode ray tube,” which is the main component of computer monitors and TVs. Color CRTs use three separate electron beams fired through a shadow mask and onto the back of the glass screen. The electron beams activate separate red, green, and blue values in various strengths in order to produce a colored image.
HydraVision™ HydraVision™ is AMD's multi-monitor management software, enabling users to manage the display of multiple windows and applications across two or more adjacent monitors. It also includes a range of productivity features designed to effectively manage applications in this environment.
32 Glossary - Workstation Products AMD FirePro W600 © 2012 Advanced Micro Devices, Inc..
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté AMD FirePro W600 2GB c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du AMD FirePro W600 2GB - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation AMD FirePro W600 2GB, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le AMD FirePro W600 2GB va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le AMD FirePro W600 2GB, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du AMD FirePro W600 2GB.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le AMD FirePro W600 2GB. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei AMD FirePro W600 2GB ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.