Manuel d'utilisation / d'entretien du produit GV-UBL1301-0F du fabricant Geovision
Aller à la page of 567
.
.
Safety Notice FCC Compliance for GV-CBW120/220 This device complies with Part 15 of the FCC Rules. Operation is subject t o the f ollowing two condit ions: (1) this device m ay not c ause harmful interf erence and (2) this device must accept any int erference received, incl uding interference that may cause undesi red operation of the device.
Preface W elc om e to th e GV-IPCAM H.264 User’s Manual . The GV-IPCAM H.264 has a series of models designed to meet different needs. This Manual is designed for the following models and fi rmware versions: Note: To upgrade the camera firmware from V2.
Model Model Number Firmware Version GV-BX1200-0F ~ 2F GV-BX1300-0F ~ 2F GV-BX1500-0F ~ 2F GV-BX2400-0F ~ 2F GV-BX2500-0F ~ 2F GV-BX3400-0F ~ 2F Fixed Lens GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2.
Model Model Number Firmware Version Target Box Camera GV-EBX1100 Series Fixed Lens V1.0 3 GV-BX120D-E V2.1 5 GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX1500-E IR Ar ctic Bo x Camera GV-BX2400-E GV-BX3400-E GV-BX5300-E Varifo cal L en s V2.
Model Model Number Firmware Version GV-MDR120 GV-MDR220 GV-MDR320 GV-MDR520 Mini Fixed Rugged Dome GV-MDR1500 Series GV-MDR2400 Series GV-MDR2500 Series GV-MDR3400 Series GV-MDR5300 Series Fixed Lens V2.14 Target Mini Fixed Dome GV-EFD1100 Series GV-EFD2100 Series Fixed Lens V1.
Model Model Number Firmware Version GV-BL120D GV-BL130D GV-BL220D GV-BL320D GV-BL1200 GV-BL1300 GV-BL1500 GV-BL2400 GV-BL2500 GV-BL3400 Varifo cal L en s Bullet C amera GV-BL1210 GV-BL1510 GV-BL2410 GV-BL2510 GV-BL3410 GV-BL5310 Motorized Varif ocal Lens V2.
Model Model Number Firmware Version GV-VD120D (IK10+, T ranspar ent Cov er) GV-VD121D (IK10+, S moked C over) GV-VD122D (IK 7, Tra nspar ent Co ver) GV-VD123D (IK7, Smoked Cover) GV-VD220D (IK10+, T r.
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 25 CM S Configurations ..................................443 25.1 Center V2 ....... ........................................................................443 25.2 VSM.. ........................................................................
Specifications : Bullet Camera (Part 2) .........................................570 Specifications : Ultra Bullet Ca mera.. ............................................ 581 Specifications : Target Bu llet Came ra .....................................
Naming a nd Def inition GV-System GeoVision Anal og and Digital Video Recording Software. The GV-System also refers to GV -M ul ti ca m System , GV-NVR System , GV-DVR Sy stem and GV- Hybrid DVR System at t he same tim e.
Options Optional devices can expand your camera’s capabilities and versatility . Contact your dealer f or more information. Device Description Power Adapter The power adapter is available for all GV-IP Camera (except Arct ic Box Camera, Mini Fix ed Rugged Dome and GV-BL2510-E / 5310-E).
Device Description GV-PA191 PoE Adapter The GV-PA191 PoE adapter is designed to provide power and network connecti on to the cameras over a single Ethernet cable. GV-PA481 PoE Adapter The GV-PA481 PoE adapter is designed to provide power and network connection to GV-BX1500-E / 2400-E / 3400-E / 5300-E over a single Ethernet cable.
Device Description Smoked Cover The smoked cover is an IK7, tinted camera cover designed for GV-Fixed IP Dome to conceal the directi on of the cam era lens. Plastic P G21 Conduit Connector The plastic PG21 conduit connector is used for running the wires of Target Mini Fixed Rugged Dome through a 1/2” conduit pipe.
Note for Connecting to GV-System The GV-IPCAM H.264 is designed to work with GV-System, a hybrid or digital vi deo management system. Note the following when GV-IPCAM H.264 is connect ed to GV-System: 1 By default, the images are rec orded to the memory card inserted in the GV-IP Cam era H.
Note for Recording 1 By default, the images are rec orded to the memory card inserted in the GV-IP Cam era H.264 (except GV-I R Arctic Box Cam era and Target Series, which are not equipped with a memory card slot). Make sure the Write recording data into local storage option (see 20.
Note for Adjusting Focus and Zoom When adjusting the Focus and Zoom Screws (on Box Camera , IR A rcti c Box Camera , Bullet Camera , IR A rctic Bu llet Ca mera , Van dal Proof IP Do me and Fixed IP Ca mera ), do not over tighten the Focus and Zoom screws.
Note for Installing Camera Outdoor When installi ng the IR A r ctic Box C amera , Bullet Camera , Ultra B ullet Camera , Targ et Bu llet Ca mera , Vandal Pr oof IP Do me , Mi ni Fixed Rugged Dome or Target Mini Fixed R ugged Do me outdoor, be sure that: 1.
3. After opening the camera c over, ensure the screws are tightened and the cover is in place. 4. The silica gel bag loses its effecti veness when the dry camera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the cam era, and conceal the gel bag in camera within 2 minutes of exposing to open air.
XXXI Note for Closin g the B ulle t Came ra Cover To ensur e that th e c ame ra perf orms its f ull capac ity ag ainst wa ter and dust, tigh tly clos e and lock the c amera c over as in dicat ed bel ow.
XXXII Note for USB Storage and WiFi Ad a p t e r Mind the following limit ations and requirements for using USB storage and GV-WiFi Adapter: 1. The USB hard drive must be of 2.5’’ or 3.5’’, version 2.0 or above. 2. The USB hard drive’s storage capaci ty must not exceed 2TB.
Chapter 1 Intro duction The GV-IPCAM H.264 series offers a comprehensive range of IP cameras supporting your needs f or IP surveillance in various environmental conditi ons. For detailed features of each model, refer to the corresponding chapter. 1.1 Sy stem Requirement To perform t he GV-IPCAM H.
Chapter 2 Box Camera The Box Camera is a series of indoor IP cameras consisting of fixed focal and varifocal models in different resolutions. The Box Camera supports lens replacement and f eatures an automatic infrared-cut filt er for day and night surveillanc e.
Box Camer a 2 Model No. Specifications Description GV-BX220D-3 Varifoca l Lens Auto Iris , f: 2.8 ~ 12 mm, F/1.4, 1/3’’ CS Lens 2 MP, H.264, D/N GV-BX320D-0 Auto Iris , f:3.1 ~ 8 mm, F/1.2, 1/3” CS Lens GV-BX320D-1 Auto Iris , f: 2.8 ~ 6 mm, F/1.
Model No. Specifications Descri ption GV-BX1200-1F 1.3 MP, H.264, Low Lux, D/N GV-BX1300-1F 1.3 MP, H.264, D/N GV-BX1500-1F 1.3 MP, H.264, Super Low Lux, D/N GV-BX2400-1F 2 MP, H.264, D/N, W DR Pro GV-BX2500-1F 2 MP, H.264, Super Low Lux, D/N GV-BX3400-1F Fixed Iris, f: 8 mm, F/1.
Box Camer a 2 Model No. Specifications Descri ption GV-BX1200-3V 1.3 MP, H.264, Low Lux, D/N GV-BX1300-3V 1.3 MP, H.264, D/N GV-BX1500-3V 1.3 MP, H.264, Super Low Lux, D/N GV-BX2400-3V 2 MP, H.264, D/N, W DR Pro GV-BX2500-3V Auto Iris , f:2.8 ~ 12 mm, F/1.
6 2.1 Packing L ist B ox C amera Termin al Bl o ck Fixed F o c al o r V arifocal Megap ixel Lens Six Lens R ings One 0.12 5 mm L ens Rin g (f o r GV -BX14 0D W o nly) Video Out W ire C a mer a Holder P owe r Ad apter GV-IPCA M H.
Box Camer a 2 2.2 Feature s • Image sensor Camera Model Image Se nsor GV-BX120D GV-BX1200 Series 1/3’’ progress ive scan low lux CMOS GV-BX130D Series GV-BX1300 Series GV-BX220D Series GV-BX320D Series GV-BX520D GV-BX5300 Series 1/2.
• Frame r ate: Camera Model Frame Rate GV-BX120D GV-BX130D Series GV-BX1200 Series GV-BX1300 Series GV-BX1500 Series Up to 30 fps at 1280 x 1024 GV-BX140DW Up to 30 fps at 1280 x 720 GV-BX220D Serie.
Box Camer a 2 2.2.1 Wid e Dynamic Range Pro Objects may appear as silhouett es when they are backed with intense lights. The Wide Dynamic Range Pro (WDR Pro) is designed t o solve this problem us ing a WDR s ensor.
2.3 Ov ervie w 2.3.1 GV-B X120D / 130D Ser ies / 14 0DW / 220D Series / Serie s / 520D 320D 1 2 3 4 5 6 7 8 9 10 12 13 14 16 15 11 Figure 2-1 Note: 1. The A uto Iris connector (No. 7) is only functional in GV-BX120D, GV-BX130D-0, GV-BX220D and GV-BX320D.
Box Camer a 2 No. Name Description 3 Audio Out Connects a speaker for audio output. 4 Audi o In Connects a microphone for audio input. 5 I/O Ter minal Block For details, see 2.6 I/O Terminal Block. 6 Power LED Indicates t he power is supplied. For detail, see the table below.
2.3.2 GV-B X1200 Series / 1300 S eries / 1500 Series / 2400 Serie s / 250 0 Seri es / 3400 S eries / 5300 Ser ies 1 2 4 5 6 7 8 9 10 3 11 12 13 14 16 15 Figure 2-2 Note: 1. The Auto Iris Connector (No. 8) is only funct ional for varifocal models of GV-BX1200 / 1300 / 1500 / 2400 / 2500 / 3400.
Box Camer a 2 No. Name Description 4 Audi o Out Connects a speaker for audio output. 5 Audi o In Connects a microphone for audio input. 6 I/O Ter minal Block Connects to I/O devices. For details, s ee 2.6 I/O Terminal Block. 7 Power LED Indicates t he power is supplied.
2.4 Connecting the Camera The Box Cam era is desi gned for indoor us e. Please m ake sure the installing s ite is s hielded from rain and moisture. 2.4.1 GV-B X120D / 130D Ser ies / 14 0DW / 220D Series / Serie s / 520D 320D Figure 2-3 1. If you are using an auto iris model, plug the iris control cable to the Auto Iri s Connector on the camera.
Box Camer a 2 6. Connect power using one of the following methods : • plugging the power adapter to the power port. • using the Power over Ethernet (P oE) function and the power w ill be provided over the network c able. 7. The s tatus L ED of the ca mera will be on.
2.4.2 GV-B X1200 Series / 1300 S eries / 1500 Series / 2400 Serie s / 250 0 Seri es / 3400 S eries / 5300 Series Figure 2-4 1. If you are using an auto iris model, plug the iris control cable to the Auto Iri s Connector on the camera.
Box Camer a 2 5. Optionally connect t o input / output devices or an infrared illuminator. For details, see 2.5.2 Infrared Il luminator and 2.6 I/O Terminal Block . 6. Connect power using one of the following methods : • plugging the power adapter to the power port.
2.5 A ccessory Installation 2.5.1 C-M ount Lenses If you use a C-mount lens, it requires a certai n distance from the camera’s imaging chip to focus the lens. Mount the suppli ed C-mount lens adapter / lens ring to the c amera, and then secure the lens onto the camera body.
Box Camer a 2 2.5.2 Infrared Illuminator s (Optional) If you u se an infra red ( IR) illu mina tor w ith I/O fun ction, follow the step s below to install it. 1. Connect the infrared illuminator to the terminal blo ck on the camera. See 2.6 The I/O Terminal Block .
2.6 I/O T erminal Block The terminal block, l ocated on the back panel of the Box Camera, provides the interface to one input and one output devic es. The I/O terminal block can be used for appl ications suc h as motion detection, event alerts vi a E- Mail and FTP, and center monitoring through Center V2 and VSM.
Box Camer a 21 2 2.6.2 Connecting to GV -Relay V2 (Optional) The Box Camera can only drive a maximum load of 200mA 5V DC . To expand the maximum volt age load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V 2 module (optional product).
Chapter 3 Ultra Box Camera The Ultra Box Camera is a series of light-weighted cameras des igned for indoor usage. Equipped with IR-c ut filter and built-in IR LEDs, the Ultra Box Camera provides excellent image qualit y. The c amera supports P oE and can be installed i ntuitively.
Ultra Box Camera 23 3 3.1 Packi ng List Ultra B ox Camer a Supporti ng r a ck Scr ew x 3 Scr ew anchor x 3 P owe r Ad apter GV-IPCA M H.264 S o f t ware CD GV-IPCA M H.264 Q uick St art Gui de GV-NVR S oftwar e DVD GV-NVR Qu ick St art Guid e Note: The power adapt e r c an b e excluded up on requ e st.
3.2 Feature s • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-UBX1301 Series Up to 30 fps at 1280 x 1024 GV-UBX2301 Series Up to 3.
Ultra Box Came ra 3 3.3 Overv iew 1 3 5 6 4 2 Figure 3-1 No. Name Description 1 Audio Out Connects a speaker for audio output. 2 Default Rese ts the came ra to fa ctory de faults. See 23.3 Rest oring to Factory Default Settings . 3 LAN / Po E Connects to a 10/100 Ethernet or PoE.
3.4 Install ation You can stand the Ultra Box Camera on a plain surface or install it to wall and ceiling. Follow the steps below to install, conne ct and adjust your Ultra Box Camera . 1. To install the device on the wall/ceiling, put the supporting rack on the desired location and make marks for screw anchors .
Ultra Box Came ra 3 5. Connect the network and power cables to the camera. See 3. 5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw.
28 3.5 Connecting the Camera 2 3 1 Figure 3-5 1. Connect power using one of the following methods : • Plug the power adapter to the 5V terminal block. The power adapter is an optional devic e. For detail, see Options in the manual. • Use the Power over Ethernet (P oE) functi on and the power w ill be provided over the network c able.
Chapter 4 Targ et Box Camera The Target Box Camera (GV-EBX) is a series of light-weighted cameras designed for indoor usage. Equipped with IR cut f ilter and built in IR LEDs, the camera is an entry-level s urveillance solution with all the essenti al features and excellent image quality.
4.2 Feature s • 1/3” progressive scan low lux CMOS for GV-EBX1100 Series • Dual streams from H.264 or MJPEG Up to 30 fps at 1280 x 1024 for GV-EBX1100 Series • Intellige nt IR • Day and nigh.
Target Box Camera 4 4.3 Overv iew Figure 4-1 No. Name Description 1 Default Rese ts the came ra to fa ctory de faults. See 23.3 Rest oring to Factory Default Settings . 2 LAN / Po E Connects to a 10/100 Ethernet or PoE. 3 Microphone Records sounds. 4 DC 12V Ter minal Block Connects to power.
4.4 Install ation You can stand the Target Box Camera on a plain surface or install it to wall and ceiling. Follow the steps below to install, conne ct and adjust your Target Box Camera. 1. To install the device on the wall/ceiling, put the supporting rack on the desired locat ion and make marks for screw anchors.
Target Box Camera 4 5. Connect the network and power cables to the camera. See 4. 5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw.
34 4.5 Connecting the Camera 1 2 Figure 4-5 1. Connect power using one of the following methods : • Plug the power adapter to the 12V terminal block. The power adapter is an optional devic e. For detail, see Options in the manual. • Use the Power over Ethernet (P oE) functi on and the power w ill be provided over the network c able.
Chapter 5 IR Arctic Box Ca mera The IR Arctic Box Camera is a series of outdoor cameras designed for environments of extreme temperatures. The cameras adhere to IP67 and IK10 protection st andards, and are equipped with IR LEDs and removable IR-cut filter for day and night surveillance.
5.1 Packing Li st • IR Ar cti c Box Camer a • Screw Anchor x 4 • Scre w x 4 • Washer x 4 • Big Torx Wrench • Small Torx Wrench • Silica Gel Bag x 2 • GV-IPCAM H.
IR Arctic Box Camera 5 5.2 Feature s • Image sensor Camera Model Im age Se nsor GV-BX120D-E 1/3" progressi ve scan low lux CMOS GV-BX1500-E 1/3" progressive sc an super low lux C MOS GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E 1/3.2" progress ive scan CMOS GV-BX2400-E GV-BX3400-E 1/2.
• 3D noise reudction (for GV-BX1500-E) • 2D noise reudction (except GV-BX1500-E) • Motion detection • Tampering alarm • Privac y mask • Text overlay • IP address filtering • Power supplied through PoE (IEEE 802.
IR Arctic Box Camera 5 5.3 Ov ervie w 1 2 3 4 5 7 6 Figure 5-1 Note: The Iris Screw (No. 7) is only available in GV-BX520D-E and GV- BX5300-E. No. Name Description 1 S ilica gel bag Des iccant that keeps t he camera housing dry. 2 I R power plug Supplies pow er to the bui lt-in IR LEDs.
5.4 Install ation The IR Arctic Box Camera is designed for outdoor use. 1. M ark the in stalla tion site an d dr ill fo ur hol es for screw ancho rs. 2. Insert the suppl ied screw anchors. 3. Secure the camera to the wall using the supplied washers and screws.
IR Arctic Box Camera 5 Til t A dju stm ent Figure 5-4 Pan A djustment Figure 5-5 7. Bas ed on the l ive view, adj ust the foc us, zoom and iris (in GV-BX520D-E and GV-BX5300-E only) of the camera. Unscrew t he cover with the suppl ied small t orx wrench.
Hold the connectors and unplug them. Figure 5-7 IMPO RTANT: Uns crew and remove the cover carefully. Pulling the cover off may caus e damages to the inner wiring of the camera.
IR Arctic Box Camera 5 8. Replac e the sil ica gel bag. Paste the s ticker to the front si de of t he silica gel bag. P ress the s ticker several t imes to m ake sure it adheres properly. Past e the silica gel bag to the indicated place. Figure 5-9 IMPO RTANT: 1.
5.5 Connecting the Camera 5.5.1 Wire Definition Figure 5-10 No. Wi re Color Definiti on 1 Black (thick) PoE 2 Black BNC TV ou t 3 Green RCA Audio Out 4 Pink RCA Audio In 1. Optionally connect a speak er (green) and an ex ternal mic rophone (pink). 2. Optionally connect a monitor using a Video Out wire.
IR Arctic Box Camera 5 3. Optionally connect t he camera’s cable to the GV-PA481 PoE adapter as illustrated below. The pow er and network will be supplied simultaneous ly. Ethernet Cable PoE GV-BX-E Rear Pa nel Power Hub/Rout er POWER & DAT A OU T DATA IN Figure 5-11 4.
5.6 Notic e for Using t he IR A rctic Box Ca mera Ensure that you: • enable IR LED function on the W eb interface after loading the default settings. • disable the status LED to reduce reflection when a green light spot appears on the live view. 5.
IR Arctic Box Camera 47 5 5.6.2 Disabling Status LED under Low Light Conditions If you have a green light spot on the live view, this is likely due t o insuffici ent light at the instal lation sit e, which caus es the status LED to reflect on the camera cover.
Chapter 6 Mini Fixed Do me & Mini Fixed Rugge d Dome The Mini Fixed Dome (GV-MFD) and Mini Fix ed Rugged Dome (GV-MDR) are fixed, mini-si zed ceiling-mount network cam eras. The GV-MDR series is designed fo r outdoor surveillance, conforming to IK10 and IP67 standards.
Mini Fixed & R ugged Dome 6 Mini Fixed Rugged D ome (G V-MDR ) Model No. Specifications Descrip tion GV-MDR120 Fixed Iris, f: 4.05 mm, F/1.5, 1/3’’ M12 Mount 1.3 MP, H.264, Low Lux, Color GV-MDR220 GV-MDR320 GV-MDR520 Fixed Iris, f: 2.54 mm, F/2.
Mi ni Fi xed Do me ( GV-M FD) Model No. Specifications Descri ption GV-MFD120 Fixed Iris, f: 4 mm, F/1.5, 1/3’’ M12 Mount 1.3 MP Low Lux, H.264, Color GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 Fixed Iris, f: 2.54 mm, F/2.8, 1/2.5’’ M12 Mount 1.3 MP / 2 MP / 3 MP / 5MP, H.
Mini Fixed & Ru gged Dome 51 6 6.1 Packi ng List Mini Fixed D ome or Mini Fixed R ugged D ome wit h 3 options f o r its LAN c onnector ( M12, W a te rpr oo f or Non-W a terproof) Torx W re.
6.2 Feature s • Image sensor GV-MFD Camera Model Image Se nsor GV-MFD120 1/3’’ progress ive scan low lux CMOS GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1/2.5’’ progress ive scan CMOS GV-MFD1501 series 1/3’ ’ progressive scan super low lux CMOS GV-MFD2501 series 1/2.
Mini Fixed & R ugged Dome 6 • Fra me rate GV-MFD Camera Model Fram e Rate GV-MFD120 GV-MFD130 GV-MFD1501 series Up to 30 fps at 1280 x 1024 GV-MFD220 GV-MFD2401 series GV-MFD2501 series Up to 30.
• Ingress protecti on (IP67 for GV-MDR series only) • EN50155 compliance for rolling stock applicat ions (for GV-MDR series only) • Endurable to low environment temperatures (-30° C ~ 50°C / -.
Mini Fixed & R ugged Dome 6 6.3 Ov ervie w 6.3.1 GV-M FD120 / 13 0 / 2 20 / 320 / 520 1 2 4 3 5 6 7 Figure 6-1 No. Nam e Description 1 Default Button Resets the camera t o factory default. See 23.3 Restoring t o Factory Default Settings . 2 Lens Receives image inputs.
LED Name Description 1. Link Turns on when the network is connected. 2. ACT Turns on when data are being transmitted. 3. PWR Turns on when power is on.
Mini Fixed & R ugged Dome 6 6.3.2 GV-M FD 1501 Series / 2401 S eries / 25 01 Ser ies / 3401 Serie s / 530 1 Seri es 1 2 3 4 5 6 7 8 9 Figure 6-2 No. Nam e Description 1 Microphone Rec eives s ound. 2 Pan Screw Loos ens the sc rew to pan. 3 Lens Receives image inputs.
1 2 3 4 Figure 6-3 LED Name Descripti on 1. Link Turns on (green) w hen the network is connected. 2. ACT Turns on (orange) when data are being transmitted. 3. Status Turns on (red) when the system is ready. 4. Power Turns on (green) when pow er is on.
Mini Fixed & R ugged Dome 6 6.3.3 GV-M DR 1 2 3 4 5 6 7 8 9 10 11 Figure 6-4 No. Name Description 1 Silica gel bag Absorbs t he moisture inside the camera. 2 Conceal paper Prevents water or m oisture from entering the camera. 3 Lens Receives image inputs.
No. Name Description 8 Default B utton Rese ts the came ra to fa ctory defa ult. See 23.3 Restoring t o Factory Default Settings . 9 Power and status LED Turns red when the power is on. Flashes orange light twice when the syst em is ready. 10 LAN LED Turns on when the network is connected.
Mini Fixed & R ugged Dome 6 2. Waterproof Con nector For this connector type, see 6.4.2 GV -MDR to install the supplied cable connect or. Ø27 mm (1.
6.4 Install ation To install a Mini Fixed Dome, make sure the installing site is shielded from rain and moisture. 6.4.1 GV-M FD Serie s 1. Unscrew the housing cover usi ng the supplied torx wrench. 2. Put the camera on the desired location and make 2 marks on the ceiling for sc rew anchors.
Mini Fixed & R ugged Dome 6 8. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.3 Adjusti ng Image Clarity . 9. Insert a Micro SD card (SD/S DHC, version 2.0 only, Class 10) into the memory card slot (No. 7, Figure 6-1).
6.4.2 GV-M DR Serie s 1. Paste the instal lation sticker on the desired location. The arrow should point toward the direct ion that the camera faces. 2. Drill one hole on each of the two curves for screw anchors. Drill the circle (30 mm in diameter) if you want to run the cable into the ceiling.
Mini Fixed & R ugged Dome 6 6. Install the cable connect or to waterproof the cable. You should have 5 parts: 1 2 3 4 5 Figure 6-10 A. Prepare an Ethernet cable with the RJ -45 connector on one end only. Figure 6-11 B. Connect the Et hernet cable t o the camera c able.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
No. Name Description 8 Rotat ional Screw Loos ens to adjust the camera angle. 9 Zoom Sc r ew Ad ju st s t he z oom of th e c ame ra. 10 F ocus Sc rew Adjust s the focus of the cam era.
Vandal Proof IP Dome (Part I) 14 14.4 Insta llation The Vandal Proof IP Dome is designed for outdoors. With the standard package, there are two ways to instal l the Vandal Proof IP Dome: hard - ceiling mount and in-c eilin g mo unt .
14.4.1 H ard-Ceil ing M ount Figure 14-2 1. Unpack the camera package and take out t he camera body. Unscrew the housing cover Unscrew thread lock 184.
Vandal Proof IP Dome (Part I) 14 Unscrew the inner housing Take out the camera body 185.
2. Mark the positi on of four screw holes on the desired inst allation location, and drill holes in the marked locations. Drill the ellipse part if you wish to put the wires through it. Figure 14-3 3. Insert the screw anchor s to the 4 hole s on the ceiling .
Vandal Proof IP Dome (Part I) 14 7. Connect the net work, power and ot her c ables to the cam era. See 14.5 Connecting t he Camera . 8. Access t he live view. See 19.1 Accessing the Live View . 9. Based on the live view, adjust the camera to a desired angle as illustrate d below .
Rotational A djustment Figure 14-7 10. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.2 Adjusti ng Image Clarity . 11. Screw on the thread lock as shown in step 1. 12. Replace the silica gel bag on the camera body within 2 minutes of opening the silica gel bag package.
Vandal Proof IP Dome (Part I) 14 14.4.2 In-Ceiling Mount Figure 14-8 1. Follow step 1 in 14.4.1 Hard-Ceiling Mount se ction to r emov e the housing cover, t hread lock and back cover, and take out the camera body. 2. Cut out a circle with a dia meter of 142 mm on the ce iling.
4. Screw in a plastic clip to the blue screw, hold it with one hand and use a screw driver to rotate the blue screw until t he plastic clip moves half way down. Plas tic Clip Figure 14-10 5. Secure a T-cap on top of the blue screw w ith a smal l screw cap and a T-cap sc rew.
Vandal Proof IP Dome (Part I) 14 7. Inse rt the ca mera to the ceiling wi th the p last ic scre ws moved in wa rd. Figure 14-12 8. Move the blue screws out and rotate the blue screw with a screw driver until t he plastic clip and the bottom of the camera body clamps the ceiling tight ly.
14.5 Connecting t he Camera Connect your Vandal Proof IP Dom e to pow er, network and other cables needed. 14.5.1 Wir e Definitio n The cables of Vandal Proof IP Dome are illustrated and defined bel ow.
Vandal Proof IP Dome (Part I) 14 14.5.2 Po wer Co nnection There are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera t o the network, and the power will be provided at the same time. • Plug the power adapter to the 12V terminal block as shown below.
194 14.5.3 Voltage Load Expansion (Optiona l) The camera can only drive a maximum load of 200m A 5V DC . To expand the maximum voltage load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V2 module (optional product ). Refer to the figure and table below.
Chapter 15 Van dal Proof IP Do me (Part II) This chapter describes t he features, physical overview and inst allation of GV-VD1530 / 2430 / 2530 / 3430, GV-V D1540 / 2440 / 2540 / 3440 / 5340 and GV-VD2540-E / 5340-E. These Vandal Proof IP Domes are outdoor cameras designed with IK10+ vandal resist ance and IP67 ingress protection.
Model No. Specifi cation Description GV-VD1530 GV-VD2430 GV-VD2530 GV-VD3430 Varifoca l lens 1.3 MP Super Low Lux / 2 MP W DR Pro / 2 MP Super Low Lux / 3 MP WDR Pro, H.264, Vandal Proof IP Dome GV-VD1540 GV-VD2440 GV-VD2540 GV-VD3440 Motorized varifo cal lens, high power IR LEDs 1.
Vandal Proof IP D ome (Part II) 15 15.1 Packing L ist • Vandal Proof IP Dome • Torx Wrench • 3-Pin Terminal Block • Audio wires • Power Adapter • TV ou t wire • RJ-45 Connector x 2 • B.
198 Installati on stick er 1 1 1 Ceiling mount template Scr ew Anchor x 4 Long Scr ew x 4 Flat Scr ew Short Scr ew x 2 Silica G el Bag x 2 Sticker (f or Silic a Gel B ag) Ruler C o nduit C onvert er Plastic PG 21 c onduit connect o r P owe r Ad epter GV-IPCA M H.
Vandal Proof IP Dome ( Part II) 199 1 5 Note: You c an ch oose t o run th e wires t hrough a conduit p ipe. Aft er you have thread ed al l the wire s , inst all the su pplied c onduit c onverter and plastic PG2 1 c onduit c onne c t o r with a s el f-pr epar ed 1/2’ ’ conduit pipe to the c amera.
15.2 Featur es • Image sensor Camera Model Image Sensor GV-VD1530 / 1540 1/3" progressive scan super low lux CMOS GV-VD2430 / 2440 GV-VD3430 / 3440 1/3.2" progress ive scan CMOS GV-VD2530 / 2540 GV-VD2540-E 1/2.8’’ progressive sc an super l ow lux CMOS GV-VD5340 GV-VD5340-E 1/2.
Vandal Proof IP D ome (Part II) 15 • Ingress protection (IP 67 rating) • Wide temperature tolerance: -40°C ~ 50°C / -40°F ~ 122°F (for GV-VD2540-E / 5340-E) • 3-axis m echanism (pan / tilt /.
15.3 Ov ervie w 1 2 3 4 5 6 8 7 9 10 12 11 13 14 Figure 15-1 202.
Vandal Proof IP D ome (Part II) 15 No. Name Description 1 LED I ndicators The power LED (top) turns on (green) when the power is on and turns off when there is no power supply. The status LED (bottom ) turns on (green) when the system operates normall y and turns off when system error occur s.
15.4 Insta llation The Vandal Proof IP Dome is designed for outdoors. With the standard package, you can install the came ra on the ceiling. Note: Y ou can also install the c amera: • on a power box.
Vandal Proof IP D ome (Part II) 15 B. Unplug the conduit connector inside the housing and disi ntegrate the connector. Y ou should have 4 parts: 1 2 3 4 Figure 15-3 C.
2.6 mm: Audio, BNC 2 mm: DC12V / AC24V 1.8 mm: DIDO Figure 15-5 IMPORT A NT: 1. Use the supplied ruler and l eave about 10 cm of pow er and I/O wires between their connect ors and the cable seal; leave at least 11 cm of audio/TV-out wires between their c onnectors and the c able seal.
Vandal Proof IP D ome (Part II) 15 3. Inst all the Et hernet cabl e. A. Rotate to remove the indicated cap and the plug inside. Figure 15-6 B. Thread an Ethernet cable (t he end w ith no RJ -45 connec.
4. Connect the wires to the camera. A. Install the terminal blocks to the pow er adapt er and I/O devices. See 15.5.1 P ower Connection and 15.5.2 I/O Device Connections. B. Inst all the s upplied RJ-45 c onnector t o the Ethernet cable. C. Plug all the connectors to the camera panel.
Vandal Proof IP D ome (Part II) 15 5. Sort out the wires at the back. You can have the wires come out from positi on A, B or bo th. The instructions here desc ribe sorting wires for position A. A B Figure 15-8 From the back of the camera housing, unscrew and rotate the plate to one side, sort out the wires and secure the plate back.
6. Secure the back plate to the ceiling . A. Paste the sti cker to the ceiling . The arro w on the stic ker indi cate s the direct ion that the camera f aces. 1 1 1 Ceiling mount template A B Figure 15-10 B. Drill 3 holes for screws. The recommended ones are indicated as ‘1’.
Vandal Proof IP D ome (Part II) 15 7. Sec ure the camera t o the ceil ing. A. Secure the s afety lock to the c amera usi ng a short s crew. Use flat screw for number 1 and small screw for number 2. 1 2 Figure 15-11 B. Thread al l the wires into the ceiling and connect them.
C. Secure the c amera using t he torx wrenc h Figure 15-12 8. Access t he live view. See 19.1 Accessing the Live View . 9. Adjust the camera’s angl e, focus and zoom of the camera.
Vandal Proof IP D ome (Part II) 15 Tilt A d jus tment Figure 15-14 Rotational A djustment Figure 15-15 213.
10. Replace the silica gel bag and secure the cam era cover using the torx wre nc h . IMPORT A NT: 1. The gel bag loses its effectiveness when the dry c amera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the camera and conceal the silica gel bag within 2 minutes of exposing to open air.
Vandal Proof IP D ome (Part II) 15 15.5 Connecting t he Camera Connect your Vandal Proof IP Dom e to pow er, network and other wires needed. 15.5.1 Po wer Co nnection There are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera t o the network, and the power will be provided at the same time.
216 15.5.3 Voltage Load Expansion (Optiona l) The camera can only drive a maximum load of 200m A 5V DC . To expand the maximum voltage load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V2 module (optional product ). Refer to the figure and table below.
Chapter 16 Fix ed IP Dome The Fixed IP Dome is a series of indoor camera designed with 3-axis mechanism for easy and flexible inst allation. The Fixed IP Dome features IR LED for in frare d illumina tion fo r nig ht surv eillance. The WDR Pro models can produce clear image for sc enes containing contrast ing intensity of lights (s ee 2.
Model No. Specification Description GV-FD1210 1.3 MP Low Lux, H.264, D/N, 3x Optical Zoom, Fix ed IP Do me GV-FD1510 GV-FD2510 1.3 MP / 2 MP Super Low Lux, H.264, D/N, 3x Optical Zoom, Fix ed IP Dome GV-FD2410 GV-FD3410 Motorized varifoc al Lens Auto Iris, f: 3 ~ 9 mm, F/1.
Fixed IP Dome 219 1 6 16.1 Pack ing List 16.1.1 Pack ing L ist for Har d-Ceili ng Mou nt Fixed IP Dome Torx W ren ch Mounting Plat e Short Scr ew Anc hor x 3 C e iling Scr ew x 3 Plate Scr ew x 3 TV-out W ire Sticker P owe r Ad apter GV-IPCA M H.
16.1.2 Packing List for In-Ceiling Mount • In-Ceiling Housi ng Cover • Mounting Plate • Mounting Bracket x 3 • Copper Pillar x 3 • Copper Pillar Screw x 6 • Bracket Screw x 3 • Thread Lo.
Fixed IP Dome 16 16.2 Featur es • Image sensor Camera Model Im age Se nsor GV-FD120D GV-FD1200 / 1210 1/3’’ progress ive scan low lux CMOS GV-FD1500 / 1510 1/3’’ progressive scan super low lux CMOS GV-FD2500 / 2510 1/2.8’’ progressive sc an super l ow lux CMOS GV-FD2400 / 2410 GV-FD3400 / 3410 1/3.
• 3-axis m echanism (pan / tilt / roll) • Bu il t -i n IR LE D • Micro S D card slot (SD/SDHC) f or local st orage • Two-way audio • One sensor input and alarm output • TV-out support • .
Fixed IP Dome 16 16.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Figure 16-1 No. Name Description 1 F ocus Sc rew Adjust s the focus of t he camera. 2 Zoom Sc r ew Adjus ts th e zoom o f t he c am era . 3 Rot ational S crew Loosens t o adjust t he camera angle.
No. Name Description 9 A udio In Connects a microphone for audio input. 10 Audio Out Connects a speaker for audio output. 11 LAN / PoE Connec ts to a 10/100 Ethernet or PoE. 12 I/O Terminal Block Connects I/O devices. For details, see 13.6 I/O Terminal Block .
Fixed IP Dome 16 16.4 Insta llation The Fixed IP Dome is designed for indoors. W ith the standard packing, there are three ways to instal l the Fixed IP Dome: hard-ceil ing mount , in- ceiling mount and wall-surface mount . Note: You may als o install the camera to ceilings, wall corners (concave or convex), and poles with opt ional mounting kits.
2. Unpack the camera package and take out t he camera body. A. Use t he torx wrench to loosen t he housing c over at the f ront and the back. Figure 16-3 B. Take out the c amera body Figure 16-4 3. Sec ure the camera body to the mounting plate with three c eiling screw s.
Fixed IP Dome 16 4. Connect the net work, power and ot her c ables to the cam era. See 16.5 Connecting t he Camera . 5. Access t he live view. See 19.1 Accessing the Live View . 6. Based on the live view, adjust the camera to a desired angle as illustrate d below .
Rotational A djustment Figure 16-8 7. Adjust image cl arity using the GV-IP Devic e Utility program. For details, s ee 19.2 Adjusti ng Image Clarity . 8.
Fixed IP Dome 16 16.4.2 In-Ceiling Mount Figure 16-10 1. Follow step 2 in the 16.4.1 Hard-Ceiling Mount t o re move t he housing cover and take out the camera body. 2. Paste the supplied sticker ont o a desired location on the ceiling and cut a circle on the ceiling along the edge of the sticker.
4. From the side with the numbering, secure the copper pillars with 3 copper pillar screws. Figure 16-12 5. Place the 3 mounting brackets at the indent next to the copper pillars (labeled as 2 on the mounting plate) and secure them using the 3 bra cket scr ew s.
Fixed IP Dome 16 6. Place the mounting plate on the camera body with the copper pillars inserted in the locations indicat ed below . The arrow on the mounting plate should be pointing toward the front of the ca mera. Figure 16-14 7. From the bottom of the camera, secure the copper pillars us ing the 3 copper pillars screws.
11. Connect the net work, power and other c ables to the cam era. See 16.5 Connecting t he Camera . 12. Access t he live view. See 19.1 Accessing the Live View . 13. Follow steps 6 and 7 in 16.4.1 Hard - Ceiling Mount sect ion to adjust the angle, focus and zoom of the camera.
Fixed IP Dome 16 16.4.3 Wall- Surfac e M ount Figure 16-18 1. Follow step 2 in 16.4.1 Hard-Ceiling Mount se ction to r emov e the housing cover and take out the camera body. 2. Paste the supplied sticker onto a d esired location on the wall. Drill th e three red dots, and the ellipse mark only if you w ish to run the wires into the w all.
5. Access t he live view. See 19.1 Accessing the Live View . 6. Follow steps 6 and 7 in 16.4.1 Hard - Ceiling Mount sect ion to adjust the angle, focus and zoom of the camera. 7. Follow step 8 in 16.4.1 Hard-Ceiling Mount se ction to secu re the housing cover.
Fixed IP Dome 16 16.5 Connecting t he Camera Figure 16-20 1. Use a standard network cable t o connect t he camera to your net work. 2. Optionally connect a speak er and an external microphone. 3. Optionally connect a monitor using a Video Out wire. Enable this function by select ing your si gnal format at the TV Ou t field on the Web interf ace.
16.6 I/O Termin al Block The terminal block, locat ed on the back panel of the Fixed IP Dome, provides the i nterface to one input and one output devices. The I/O terminal bl ock can be used for app lications s uch as motion detection, event alerts vi a E-Mail and FTP, and center monitoring t hrough Center V2 and VSM.
Fixed IP Dome 237 16 16.6.2 Voltage Load Expansion (Optiona l) The camera on its own can only drive a maximum load of 200mA 5V DC . To expand the maximum voltage load to 10A 250V AC / 10A 125V AC / 5A 100V DC ), connect the cam era to a GV -Relay V2 module (optional product).
Chapter 17 Cub e Camera The Cube Camera is a light weighted wired / wireless network camera designed for indoor usage. Its simple des ign allows for fast and easy installation and fixed-spot surveillance once installed. Four models are available: Model No.
Cube Camera 239 17 17.1 Pack ing List Cube C amera Supporti ng R a ck Scr ew x 3 Scr ew Anchor x 3 GV-IPCA M H.264 Q uick Start Gu ide P owe r Ad apter GV-IPCA M H.264 S o f t ware CD GV-NVR Qu ick St art Guid e GV-NVR S oftwar e DVD Note: The power adapt e r c an b e excluded up on requ e st.
17.2 Featur es • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CB120 / CBW120 Series 30 fps at 1280 x 1024 GV-CB220 / CBW220 Series 30 fps at 1920 x 1080 • Day and night function (electroni c) • Wide Dynamic Range (WDR) • Defog • Wireless connectivity: WiFi 802.
Cube Camera 17 17.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 Figure 17-1 No. Name Description 1 Microphone Receives sounds. 2 Speaker P lays sounds. 3 LAN Connect s to a 10/100 Ethernet. 4 Status LED Turns red when the system powers on. Turns orange when the system is ready.
17.4 Insta llation Follow the steps below to instal l, connect to and adjust your Cube Camera and Wireless Cube Cam era. 1. Put the supporti ng rack on t he desired location and make marks for screw anchors. Figure 17-2 2. Drill the mark s and inser t the scre w ancho rs.
Cube Camera 17 5. Connect the network and power cables to the camera. See 17.5 Connecting t he Camera . 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw.
244 17.5 Connecting t he Camera 1 2 Figure 17-5 1. Use a standard network cable t o connect t he camera to your net work. 2. Power on using the power adapter. The power adapter is an optional device. For detail, s ee Options in the manual . 3. The status LED of the camera w ill be orange.
Chapter 18 Advanced Cube Camera The Advanced Cube Camera integrates the passive infrared (PIR) sensor and the alarm LED to illu minate the scene automatically w hen the motion is detect ed. It also off ers wireless connection t o the network f or fl exible installat ion.
18.1 Packing L ist • Advanced Cube Camera • Supporting Rack • Scre w x 3 • Screw Anchor x 3 • GV-IPCAM H.264 Quick Start Guide • GV-IPCAM H.264 Software CD • GV-NVR Quick Start Guide • GV-NVR So f twa re D VD Note: Power adapter can be purchased upon request.
Advanced Cube Camera 18 18.2 Featur es • 1/2.5’’ progress ive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CA120 / CAW120 30 f ps at 1280 x 1024 GV-CA.
18.3 Ov ervie w 1 2 3 4 5 6 7 8 9 10 11 12 Figure 18-1 No. Name Description 1 Speaker Plays sounds f or tampering and motion alarm, and listens t o the audio around the camera. To s et up al arm sound, see 21. 3.9 Speaker. 2 PIR sensor Passive infrared sensor.
Advanced Cube Camera 18 No. Name Description 10 Ready LED Reflects system status of the c amera. See the below table. 11 LAN LED Reflects LAN stat us of the camera. See the below table. 12 Mem ory Card Slot Insert s a micr o SD ca rd (SD /SDH C, version 2.
18.4 Insta llation Follow the steps below to instal l, connect to and adjust your Advanced Cube Camera and Wireless A dvanced Cube Camera. 1. Put the supporti ng rack on t he desired location and make marks for screw anchors. Figure 18-2 2. Drill the mark s and inser t the scre w ancho rs.
Advanced Cube Camera 18 5. Connect the network and power cables to the camera. See 18.5 Connecting t he Camera. 6. Access t he live view. See 19.1 Accessing the Live View . 7. Adjust the angle of the camera based on live view and fasten t he indicat ed screw.
252 18.5 Connecting t he Camera 1 2 Figure 18-5 1. Use a standard network cable t o connect t he camera to your net work. 2. Connect power using one of the following methods : • plugging the power adapter to the power port. The power adapter is an optional device.
Chapter 19 Ge tting S tarted This section provides the initi al and basic configurations of the GV-IPCAM H.264. 19.1 A ccessing the L iv e View Access or configure your c amera according t o the camera t ype and its firmware version: Camera Ty pe & Firmware Version Default Connect ion Ty pe • GV-I PCAM H.
Camera Ty pe & Firmware Version Default Connect ion Ty pe • GV-I PCAM H.264 with firmware V1.06 or earlier • GV-PTZ010D Static The default IP address 192.168. 0.10 w ill be automatically ass igned when the camera is connected t o the net work.
Getti ng Star ted 19 19.1.1 Che cking the Dynamic I P Address Follow the steps below to look up the IP address and access the Web interface . 1. Install the GV-IP Device Utilit y program included on the GV-IPCAM H.264 Software CD . Note: The PC installed with GV-IP Devic e Utility must be under the same LAN with the GV-IPCAM H.
3. Find the camera with its Mac Address, click on its IP address and selec t We b Page . Figure 19-2 4. The login page appears. Figure 19-3 5. Type the default ID and password admin and click A pply to log in.
Getti ng Star ted 19 19.1.2 Conf iguring th e IP Addr ess Follow the steps below to configure the IP address. 1. Open your web browser, and type the default IP address http:// 192.168.0.10 . 2. In both Login and Password fields, type t he default value admin .
IMPO RTANT: 1. If Dy namic IP Address or PP PoE is enabled, you need to know which IP address the camera w ill get from DHCP server or ISP to log in. If your camera is i nstalled in the LAN, use the GV-IP Device Utility to look up its current dyna mic IP address.
Getti ng Star ted 19 19.1.3 Configuring the Wireless Connection You may c reate wireless connection t o the I nternet for: • B ox Camera: GV-BX1200 series / 1300 series / 1500 series / 2400 series /.
B. Type t he Network Name (SSID) or click the A ccess Point Survey button to search and select for the available Acc ess Points/ wireless st ations. C. Sel ect Ad -H o c or In frastructure for the Network type. D. Select the A uthentication Ty pe using the drop-down list.
Getti ng Star ted 19 4. Enable wireless LAN. A. On the W eb interface, select Net work and LA N . This page appears. Figure 19-6 B. Selec t Wireless for Optional Network Type. C. To use a dyna mic IP address ass igned by the DHCP server, selec t Dy namic IP address .
5. Click A pply . The Camera will s tart creating a wireless connection to the access point. Note: For GV-CBW120/220 and GV-CAW120/220, the LAN LED (No. 5, Figure 17-1; No.11, Figure 18-1) turns blue when the connecti on is established. 6. Unplug the Ethernet cabl e.
Getti ng Star ted 19 19.2 A djusting Image C larity Note the procedures descri bed in this section only apply to Box Camera , IR A rctic Box C amera , Bu llet C ame ra , PT C amera , Vanda l Proof IP Dome , Mi ni Fixed Dome , Min i Fixed Rugged Dome , Target Mini Fixed Dome, Target Mini Fi xed Rugged Dome , and Fixed IP Dome .
3. Select Focus Value. The Login dialog box appears. Figure 19-8 4. Type the user name and password of the camera selected. The default is admin for both user name and password.
Getti ng Star ted 19 6. For Mini Fixed Do me , Mini F ixed Rugged D ome , Targe t M ini Fix ed Dome and Target Min i Fixed Rugged Dome , hold the camera c over close to the lens for precis e focus adjustment. 7. Adjust the Focus Screw and the Zoom Screw of the camera slowly until the focus value reac hes the maximum.
19.2.1 Using Focus Adjustment Cap The Focus Adjustment Cap is only supplied for IK10+ models ( GV-VD120D / 121D / 220D / 221D / 320D / 321D / 1500 / 2400 / 2500 / 3400 / 15 30 / 2430 / 2530 / 3430) . Hold the Focus Adjustment Cap on top of the camera view and keep it close to the camera.
Getti ng Star ted 19 19.2.2 Loc ations o f Adjustment Sc rews Models Ad j u s t m e n t S c r ew s Box Camera Zoom Scr ew Focus Screw Bullet C amera Zoom Scr ew Focus Sc rew Vandal Proof IP Dome Focus.
Models Ad j u s t m e n t S c r ew s Mini Fixed Dome Lens Sc rew Focus Ring Mini Fixed Rugged Dome Lens Screw Focus Ring Note: 1. The adjustment screws of Box Camera may vary f or different models. 2. To focus GV-MFD and GV-MDR, loosen the lens screw first and slowly adjus t the foc us ring.
Getti ng Star ted 269 19 19.3 Configuring the Basic s Once the c amera is properly installed, the f ollowing important features can be configured using the browser-based conf iguration page and are discussed i n the following sections in this manual: • Date and time adjust ment: see 21 .
Chapter 20 Accessing the Camera Two types of users are allowed to log on to the GV-IPCAM H.264: Ad m i n i s t r a t o r and Guest . The Administ rator has full access to all system configurat ions, while the Guest can only access the live view (except the Camera A djustment sett ings) and network status.
Accessing the Ca mera 20 20.1 A ccessing Your Surv eillance Image s Once installed, your GV-IPCAM H.264 is accessible on a network. Follow these st eps to access your s urveillance im ages: 1. Start your web browser. 2. Enter the IP address or the domain name of the camera in the Location/Address field of your browser.
20.2 Functions Featu red on the Main Page This section introduces t he features of the Live View window and Network Status on the main page. The two features are accessible by both Administ rator and Guest. Main Page of Guest Mode ▼ Video and Motion ► Live View ► Camera ▼ Network ► Statu s Figure 20-2 The GV-IPCAM H.
Accessing the Ca mera 20 20.2.1 The Live View Window Internet Explor er When accessing the li ve view using Internet Explorer, the foll owing window appears.
11 12 Figure 20-3B 274.
Accessing the Ca mera 20 No. Name Functi on 1 Pl ay Plays live video. 2 St op St ops playing video. 3 Microphone Broadcasts to the surveillance site from a remote PC. No te th is fun ction is no t av ailab le for Ult ra Bulle t Camera and Target Series .
No. Name Functi on 8 Show System Menu Brings up these funct ions: Alarm Noti fy, Vi deo and Audio Configurati on, Remote Config, Show Camera Name and Image E nhance. --- See 20.2.6 Alarm Notif ication , 20.2.7 Vi deo and Audio Configuration , 20.2.8 Remote Conf iguration, 20.
Accessing the Ca mera 20 Non-IE Browsers When accessing the li ve view using Google Chrome, Firefox or Safari, this window appears. Note the foll owing functions are not supported on non-IE browsers: Motion Detect ion, Tampering Alarm, Visual Automation, Tex t Overlay and Two-Way Audio.
20.2.2 T he Contro l Panel o f the Liv e View Window To open the control panel of the Live View window, click the arrow button on top of the window. You can access the following funct ions by using the right and left arrow buttons on the control panel.
Accessing the Ca mera 20 [Information] Displays the version of the camera, t ime of the local computer, time of the camera (host time), the number of users loggi ng in the camera and the OCX registration path. [Video] Dis plays the current video codec, resolution and dat a rate.
Image O rien tatio n: Changes the image orient ation on the Live View win do w. Slowest Sh utter Spe ed : Shutter speed controls t he a mount of the lights ent ers the image sensor and directly impacts the quality of image presentati on.
Accessing the Ca mera 20 Zoom: Cli ck the Zoom In and Zo om Out buttons to adjust the apparent dist ance of the scene. Aft er zooming t he camera, re-f ocus the camera manually or automatical ly. For details, see Focus Change and Focus Mode below.
Figure 20-6B Figure 20-6A Figure 20-6C 282.
Accessing the Ca mera 20 Note: 1. GV -PTZ010D only contains the G amma feature. 2. Saturation is not available for GV -PTZ010D. 3. Slowest Shutter Speed and Defog is not available for GV - BX140DW . 4. D/N , Slowest Shutter Speed and Defog are not available for GV - PTZ010D.
20.2.3 Snapshot of Live Video To take a snapshot of live video, follow these steps: 1. Click the Snapshot button (No. 5 , Figure 20-3). The Save As dialog box appears. 2. Spec ify Save in , type the File na me , and select JPEG or BM P as Save as Ty pe .
Accessing the Ca mera 20 20.2.5 Picture- in-Pictur e and Pictu re-and-Pi cture Vi ew The full s creen mode provides two t ypes of cl ose-up views: P icture-in- Picture (PIP) and Picture-and Picture (PAP) . The two views are useful to provide clear and detailed images of the surveillance area.
Picture- and-Pictu re View With the Picture and Picture (PA P) view, you can create a split video effect with multip le close-up views on the image. A total of 7 close-up views can be defined. Figure 20-8 1. Right-click t he live view and select PA P .
Accessing the Ca mera 20 6. To delete a navigation box, right-click the desi red box , select Focus Ar e a of PAP Mode and click Delete . 7. To ex it the PAP vi ew, right-click the image and click PA P again.
20.2.6 Alarm Notificatio n After input triggers and m otion detection, you can be alerted by a pop-up live video and view up to four captured images. Pop-up live video Captured images video Figure 20-9 To con figur e this fun ction, click the Show S ystem Me nu button (No.
Accessing the Ca mera 20 I/O A lar m No tify : Once the input device is triggered, the captured images are displayed on t he control panel of the Live View window. For this f unction to work, the A dministrat or needs to inst all the input device properly.
20.2.7 Video a nd A udio Configuration You can enable the mic rophone and s peaker for two-way audio communication and adj ust the audio volume. To change audio configurat ion, click the Show System Menu button (No. 8, Figure 20-3), and select Video and A udio Conf iguration .
Accessing the Ca mera 20 Audio Configure: You can enable t he microphone and speaker, and adjust the audio volume Figure 20-12 291.
20.2.8 Remote Configuration You can upgrade firmware over the network. Cl ick the Show S y ste m Me nu button (No. 8, Figure 20-3), and select Remote Config . The R emote Config dialog box will appear. [Firmware Upgrade] In this tab, you can upgrade the firmware over the Internet.
Accessing the Ca mera 20 20.2.11 Visual PT Z Note this feature is only avail able in PTZ Ca mera and PT Ca mera . The Visual PTZ provides two types of PTZ control panels on live images for easy and direct PTZ operati on. Activating Visual PTZ Click the PTZ C ontrol button (No.
Figure 20-15 The Visual P TZ Panel provides the following f eatures: No. Name Description 1 Zoom I n Shortens the apparent distance between the camera and the view . 2 Zoo m O u t Lengthens the apparent distance between the camera and the view . 3 Focus I n 4 Focus Out Adjusts the sharpness of the camera view .
Accessing the Ca mera 20 Setting Visual PTZ Panel Click the .button on the top left corner and select Visual PTZ, the following options will appear. PTZ Control Ty pe: Two types of visual PTZ control panels are available. Ty pe 1: Appears only when a movement of the curs or is detected and dis appears when it is stati c.
20.2.12 Dig ital PT Z Note this functi on is only supported by firmware V2. 06 . This function allows non-PTZ cameras to simulate PTZ movements on live view. 1. Right-cl ick the live view and select Digital P TZ . The live view is labeled with “DPTZ” at the top left corner.
Accessing the Ca mera 20 3. To pan and tilt the view, zoom the image first and then click and hold the arrow on the image. The arrow appears when you place the cursor in one of the eight directions, i. e. up, down, left, right, left up, left down, right up and right down.
20.2.13 I/O Control Note this functi on is only supported by cameras with I/O funct ion. The I/O Control window provides a real-tim e graphic display of camera status, I/ O status, and alarm events. Additionally, you ca n re mot ely force output to be triggered.
Accessing the Ca mera 20 20.2.14 Visu al Automatio n Note this functi on is only supported by cameras with I/O funct ion. The Visual Automation all ows you to c hange the c urrent state of the electronic devi ce by simply clicking on its image, e.g. turning t he light ON.
300 20.2.15 Net wo rk Status To view the network status, in the left menu, click Network and select Status . Figure 20-21.
Chapter 21 A dminis trator Mode The Administ rator can access the s ystem confi guration through t he network. Eight cat egories of configurations are involved in t he system configurat ion: Video and Motion , I/O Cont rol or Digi t al I /O a nd PTZ , Events and A lerts , Monitoring , Recording Schedule , Remote ViewLog , Network and Management .
List of Menu Opt ions Find the topic of interest by referring to the secti on number prefixed to each option. The available options vary am ong camera models. 21.1 Video and Motion 21.1.1 Video Settings 21.1.1 Motion Det ection 21.1.3 Privacy Mask 21.
Administrator Mode 21 21.8 Management 21.8.1 Date and Ti me Sett ings 21.8.2 S torage Settings 21.8.3 User Account 21.8.4 Log Informati on 21.8.5 T ools 21.
21.1 Video and Motio n The GV-IPCAM H.264 can simultaneously process one video sourc e in two different c odec and resolutions. The dual-stream design benefits f or low er bandwidth environment , allowing Streaming 2 to be set with lower resoluti on and codec for live streaming, and Streaming 1 set with highest resoluti on and codec H.
Administrator Mode 21 21.1.1 Video Setti ngs Figure 21-2A 305.
Figure 21-2B 306.
Administrator Mode 21 [Name] Rename the video stream. To display t he name of video stream on the Live View window, see 20.2.9 Camera Name Di splay . [Connection Template] Select the type of your network connect ion.
Camera T y pe Defaul t Max. Bitrate for VBR St r e am 1 6 M b i t 1.3 MP St r e am 2 4 M b i t St r e am 1 8 M b i t 2 MP St r e am 2 4 M b i t S tream 1 12 Mbit 3 MP St r e am 2 4 M b i t 4 MP Stream.
Administrator Mode 21 Select Enable and click ROI Setting to conf igure: 1. On the popup window, use your mouse and draw directly on the live view to specify a regi on. Figure 21-3 2. To set up a region with enhanced clarity, select ROI , sel ect High , Me diu m or Low u sing the drop-down list and then drag on the image to outline a region.
[Vide o S lice Mode ] Note this f unction is only s upported by f irmware V2. 12 or earlier and is not support ed for Target Series . Corrects the display mode of the camera when it is displayed on a third-part y NVR/DVR software and the live view is incom plete or broken.
Administrator Mode 21 [Text Overlay Settings] Overl aid with camera name: Includes streaming names on live and recorded videos. Overlaid wit h da te s ta mps : Includes date stamps on live and recorded videos. Overlaid with ti me st amps : Incl udes time stamps on live and recorded videos.
[TV Out] Note this function is only available f or Box Camera , IR A r ctic Box Camera , Vandal Pr oof IP Dome and Fixed IP Dome . Select the signal f ormat of t he Video Output on the camera as either NTSC or PAL.
Administrator Mode 21 [Special View Setting] D/ N: S ets the sensi tivity of day-night m ode switch. The higher t he sensitivi ty value, t he more s ensitive the s witch is from day m ode to night mode.
Iris Ty pe: Note this function is not supported for GV-IP Cameras with fixed lens or fixed iris. This field shows the iris type (DC-I ris or P-Iris) of your GV-IP Camera. A uto Iris: The option is designed for auto iris lens (DC-Iris or P- Iris).
Administrator Mode 21 21.1.2 M otio n Detection Note for firmware V1.07 or later and the Target Series (except GV- PTZ010D), motion detection is disabled by default; for GV-PTZ010D, motion detecti on is enabled by default. Motion detecti on is used to generate an alarm whenever movement occurs in the video image.
1. Select the desired s ensitivity by moving the slider. There are te n values. The higher the value, the m ore sensitive the camera is to motion. 2. Drag an area on the image. Click Ad d when you are prom pted to confirm the setti ng. 3. To create several areas with diff erent sensitivity values, repeat steps 1 and 2.
Administrator Mode 21 21.1.3 Priv acy M ask The Privacy Mask functi on is used to block out sensitive areas on live view and recorded clips f or cameras c onnecting to GeoVision software. Thi s feature is ideal for loc ations with displays, keyboard sequenc es (e.
21.1.4 T ext Ov erlay The Text Overlay allows you to overlay any text in any place on the camera view. Up to 16 text messages ca n be created on one camera view. The over laid tex t will b e saved in the r ecor dings. Figure 21-6 1. Select the f ont, font style and font size in a pop-up window.
Administrator Mode 21 6. Click Set Fo nt to modify the font settin gs. 7. Click Save to apply the sett ings, or click Loa d (Undo) to revert to the last save d se tting . 8. Click Preview to see how the text will appear on the i mage. Click Close t o end the preview.
21.1.5 T ampering Alarm Note t his function i s not available for PTZ Ca mera and PT Came ra . Tampering Alarm is used to detect whether a camera is being physically tampered. An alarm can be generated when the camera is moved, covered up, or out of focus.
Administrator Mode 21 Figure 21-8 To configure the tampering alarm: 1. Sele ct the Enable option. 2. If you want t he camera to ignore any m ovement or scene change in certain areas, c lick the button to drag areas on the camera view. 3. Sele ct the desi red detect ion sensitivit y by m oving the sl ider.
6. To trigger an alarm when the scene turns dark, e.g. the lens of camera has been covered, select A larm for Dark Images . F or Target Series, this function is automaticall y selected when Tampering Alarm is enabled. 7. Click A pply to save all th e se tting s.
Administrator Mode 21 21.1.6 Visu al Automation Note this functi on is only supported by cameras with I/O funct ion. This intuitive f eature helps you automate any electronic device by triggering t he connected output device. When you click on t he image of the electronic devi ce, you can simply change its current state, e.
3. Ass ign the connect ed module and out put devi ce. In the Note fiel d, type a note to help you manage the device. Click OK to sav e the settings. 4. To c hange the frame c olor of t he set area, c lick the Set Col or button. 5. To emboss the set area, select Floa t Up ; or k eep it flat by selecting Normal .
Administrator Mode 21 21.2 I/O Set tings Note the I/O settings are only available f or Box Camera , Bu llet C am era , Ultra Bull et Camera , PT Z Camer a , PT Ca mera , Vanda l Proof I P Dome and Fixed IP Dome . After installing the I/O device, you need to enable the I/O settings on the camera.
21.2.1 Input Settings To activat e the sens or input, sel ect En abl e . Figure 21-11 Norm al State: You can set the input s tate to t rigger act ions by selecting Ope n C ircuit (N /O) or Grounded Circu it (N/C) . Latch M ode: Enable this option to have a momentary output alarm.
Administrator Mode 21 PTZ Settings: Note this function is only avai lable for PTZ Ca mera and PT Ca mera . Input On: Select a preset point to w hich the c amera turns when an input is triggered. Input Off: Select a preset point to which the camera returns when the input triggeri ng is off.
21.2.2 Out put Sett ings Select Enable to start the output device. Choose the output signal that mostly suits the device you are using: N/O (Open Circuit), N/C (Grounded Circuit ), N/O Toggle, N/C Toggle, N/O Pulse or N/C Pulse. For Togg le output type, the output conti nues to be triggered until a new input trigger ends the output.
Administrator Mode 21 21.2.3 PTZ Set tings Note this functi on is only available in PTZ Ca mera and PT Camera . You can change the im age settings, c onfigure s equences, and acc ess settings incl uding autopan speed, motor reset, digit al zoom and system default loading.
21.3 Ev ents and Alert s For the events of motion detection or I/O trigger, the Admi nistrator can set up two trigger actions: 1. Send a captured still image by E-mail or FTP. 2. Notify Center Monitoring Station, Center V2 or VSM, by video or text alerts.
Administrator Mode 21 21.3.1 E- mail After a trigger event, the camera can send the e-mail to a remote user containi ng a captured st ill image. Figure 21-14 [Enable] Select to enable the e-mail function. S ever URL/IP Address: Type the URL address or IP address of the SMTP Ser ver.
Alerts I nterval Time: Specify the interval bet ween e-mail alerts. The interval is bet ween 0 and 60 minutes. The option is useful for the frequent event occ urrence, by which any event triggers duri ng the interval period will be ignored.
Administrator Mode 21 21.3.2 FT P You can also send the captured still im age to a re mote FTP server f or alerts. Figure 21-15 [Upload to an FT P Server] Enable: Select to enable the FT P function. S erver URL/IP Address: Type the URL address or IP address of the FTP Server.
User Nam e: Type a valid username to log into the FTP Server. P assword: Type a valid password to log into the FTP Server. Rem ote Directo ry: Type the name of the storage f older on t he FTP Serve r. Alerts I nterval time in minute: Specify the interval between FTP alerts.
Administrator Mode 21 To access the internal FTP server through a web browser, enter the IP address or the domain name of the camera in your browser like this: ftp:// 192.168.0.10 When you are prompted for Usernam e and Password, enter the default value username ftpuser and password 123456 .
21.3.3 C enter V2 After a motion or an I/O triggered event, the central m onitoring station Center V2 can be notified by live videos and text alerts. For the live monitoring through Cent er V2, you must already have a subscriber account on Center V2. A cam era can connect to up to 2 Center V2 s tations simultaneous ly.
Administrator Mode 21 To enable the Center V2 connection: 1. A ctivate Li nk: Enable t he monitoring through Center V 2. 2. Host Name or IP Address: Type the host name or IP address of Center V2. 3. Port Nu mber : match the port to the P ort 2 value on Center V2 or keep the default value 5551 .
21.3.4 VSM After a motion or an I/O triggered event, the central m onitoring station VSM can get notified by text alerts. For the monit oring through VSM, you must already have a subscri ber account on VSM. A camera can connect up to 2 VSM sim ultaneously.
Administrator Mode 21 To enable the VSM connection: 1. A ctivate Li nk: Enable the m onitoring through VSM. 2. Host Name or IP A ddress: Type the host name or IP address of VSM. 3. Port Number : Match the port to the Port 2 value on VSM. Or keep the default value 5609.
21.3.5 B ackup Cen ter For the supported versi on of different models, see Appendix D . Note tha t Backup Center is not support ed for Target Series . The connection to the GV-Backup Center allows you.
Administrator Mode 21 To enable connection to GV-Backup Center: 1. A ctivate Li nk : Enable the connection to the GV-Backup Center. 2. Host Name or IP Address : Type the host name or IP address of the GV-Backup Center. 3. Port Nu mber : Match the comm unication port on the GV-Backup Center or keep the default value 30000 .
2. Host Name or IP A ddress : Type the host name or IP address of the failover GV-Back up Center. 3. Port Nu mber : Match the comm unication port on the fai lover GV- Backup Center or keep the default value 30000 . 4. User Name : Type a valid user name to log into the failover GV- Backup Cent er.
Administrator Mode 21 21.3.6 Vid eo Gatew ay / R ecordin g Serv er For the supported versi on of different models, see Appendix D . The GV-Video Gateway / GV-Recording Server is a video st reaming server designed for large-scale video surveillance deployments.
The support ed GV-IPCAM H.264 can c onnect up to t wo GV-Video Gateway / GV-Recording Server. To send the video images to the GV- Video Gateway or GV-Recordi ng Server, follow the steps below. 1. A ctivate Li nk : Enable the connection to the GV-Video Gateway / GV- Recording Server.
Administrator Mode 21 21.3.7 Vie wLog Server Note that ViewLog Server is not supported for Target Series . The ViewLog Server is designed for rem ote playback function. This server allows you to remotely acc ess the recorded files saved at the GV-IPCAM H.
21.3.8 RT SP The RTSP enables video and audio streaming to your 3G-enabled mobile phone. The RTSP streaming is enabled by default. Fig ure 2 1-21 Activate Link: Enable the RTSP service. RTSP/TCP P ort: Keep the de fault value 8554, or modify it if necessary.
Administrator Mode 21 For details on remote monitori ng with mobile phones, see Mobile Phone Connection, Chapt er 26 . For RTSP comm and, see Appendix E .
21.3.9 Speaker Note this functi on is only available for Advanced Cube Camera . The Advanced Cube camera is equipped with an alarm. With the Speaker settings, your camera can sound the speaker (No. 1, Figure 18-1) when it is being tampered or when motions are detected.
Administrator Mode 21 21.4 Monitoring Recording funct ion is not supported in Target Series . Re fer to 21.4.1 Monitoring S ettings f or Target Series for the corres ponding page. You can start monitoring m anually, by schedule or by input trigger. Note: See Note for Connecting to GV-System at the beginning of the manual.
I nput: Note this function is only supported by cameras with I/O function. Manually starts I/O monitoring. When the sensor input is triggered, its associated camera and output will be activated for recording and alerti ng. For this setting, see 21.
Administrator Mode 21 21.5 Recording Sche dule Note t his function i s not available for Target Series . The schedule is provided to acti vate recording and I/O monitoring on a specific tim e each day. 21.5.1 R ecording Schedu le Settin gs You can set the sc hedule for recording.
21.5.2 I/O Monitoring Settings Note this functi on is only supported by cameras with I/O funct ion. You can set the sc hedule for I/O m onitoring to s tart. Figure 21-26 S pan 1- Span 3: Set different time frames during the day to enable I/O monitoring.
Administrator Mode 21 21. 6 Remote View Log Note this functi on is not available for Target Series . With the Remote ViewLog player, you can pl ay back the files recorded at the GV-IPCAM H.264 over TCP/IP network. For the first-time user, you need to install the Remote ViewLog program fro m the Softw are CD .
21.7 Net work The Network section includes some basic but important network configurat ions that enable the camera to be connected to a TCP/IP network. 21.7.1 L AN Configu ration According t o your network environment, select am ong Static IP, DHCP and PPPoE .
Administrator Mode 21 [Optional Network Ty pe] Note the Wireless Settings are only available in GV-BX 1200 Series / 1300 Series / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 Series , GV-CBW120 / 220 , GV-CAW120 / 220 and GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series .
21.7.2 Wir eless Clien t M ode Note this functi on is only supported in GV-BX1200 Seri es / 1300 S eries / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 , GV- CBW120 / 220 , GV-C A W120 / 220 and GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series and when GV- Wi Fi Adapter is install ed.
Administrator Mode 21 Netw ork name (SSID) : The SSID (Service Set Identify) is a unique name that identifi es a particular wireless network. Type SSID of the Wireless LAN group or Access Point you are going to connect to.
358 21.7.3 A dvanced TCP/IP This secti on pr ovides th e advanced TCP/IP s ettin gs, inclu ding DDNS Server, HT T P port, HTT PS, str eaming p o r t, UPnP , QoS and net work connecti on ch e c k.
Administrator Mode 359 2 1 Figure 21-2 9B [Dynamic DNS S erver S ettings] DD NS (D ynam ic D omain N ame Sy stem) provid e s a con venient wa y of acc e ss ing th e cam era when using a dynamic IP.
360 4. User N ame: T y pe the us e rn ame us ed t o enab le th e s er vice from th e DDNS. Th e us e rn ame sh ould l ook simil ar to you r host name. D e pendi ng on your s e rvic e pro vider, you should add d omain name (.dipm ap.com, .g vdip.c om or .
Administrator Mode 21 [QoS Settings] The Quality of Service (QoS) is a bandwidth control mechanism that guarant ees delay-sensiti ve data flows such as voice and video streams , obtain a certain amount of bandwidth to keep the streaming smoot h. To apply QoS to GV-IPCAM H.
21.7.4 I P Filter Set tings The Administ rator can s et IP fi ltering to rest rict access to the c amera. Figure 21-30 To enable the IP Filter function: 1. Enable IP Filte ring : Enable the IP Filter function. 2. Filtered IP: Type one IP address or a range of IP addresses you want to restri ct the access.
Administrator Mode 21 21.7.5 SNM P Sett ings The Simple Network Management Protocol (SNMP) allows you to monitor the st atus of the c amera through SNMP network m anagement soft ware.
1. Sele ct Enable SNMPv1 SNMPv2 c to enable the function. 2. To enable access to Read/Write community , type a community string. This will serve as a pa ssword to allow read and wr ite access to the camera from the SNMP software.
Administrator Mode 21 21.8 Management The Management section includes the setti ngs of data and time and user account. Y ou can als o view the f irmware version and execute c ertain system operati ons. 21.8.1 D ate & Time S ettings The date and time settings are used for date and time stamps on the image.
[Date & Time on GV-IP Camera] Displays the current date and time on the camera. [Time Zone] Sets the time zone for local sett ings. Select Enable Da y light Saving Time to automatically adjust the cam era for daylight saving tim e. Type the Start Time and End Time to enable the daylight saving function.
Administrator Mode 21 21.8.2 Storage Set tings Based on Linux file system , the GV-IPCAM H.264 supports memory cards for video and audio recordings. You need to format the storage device by using the following Storage S ettings. After being formatted, t he storage device will be ready to use by Linux OS of the camera.
[Storage Settings] Enable re cy clin g: If Ena ble recy cling is selected, when the space of the storage device is lower than the spe cified space, the system w ill overwrite the oldest recorded files. If Ena ble recy c ling i s not selected, the system will stop recording when the specified space is reached.
Administrator Mode 21 [Partition Information] Note t his function i s not s upported for Target Series . Th is sec tion sho ws the partition det ails of the attached storage device. To add a storage device: 1. Ins ert the st orage devic e to the cam era.
Note: 1. If Enable Recy cle is selected, the available s pa ce of the storage device must be higher than the space you specified at the Stop recording or recy cle disk when free space of d isk is smaller than x option. Otherwise no video will be recoded.
Administrator Mode 21 [Network Neighborhood Settings] Note t his function i s only available for Target Series using firmware versions 1. 02 or later. You can st ore recordings to a connect ed NAS server. Note: 1. For optimal performance and comp atibility , it is highly recommended to use a GV -NAS S ystem.
Note: Depending on the models of GV -NAS System, up to 16 default user accounts (username: Cam01 – Cam16 ; password: 12345678 ) are available. The storage limitation and recycle is applied on a user basis. It is recommended to use one user account exclusi vely for recording of one GV -IP Ca mera to avoid uneven data recycle.
Administrator Mode 21 Ti p: Inst ead of searching for available NAS servers, you can also type the storage path directly . 1. T ype the Server URL/ IP Addre ss in this format: NA S IP A ddressStorage Folder .
21.8.3 User Account You can change the login name and password of Administrator and Guest. The default Administrat or login name and password are admin ; the default Guest login name and password are guest . To allow a Guest user log in without entering nam e and password, select Disable authentication for guest account .
Administrator Mode 21 21.8.4 Log Information The log information contains dum p data that is used by service personnel for analyzing problem s. The logs available may vary depending on the camera model.
Figure 21-40-2 376.
Administrator Mode 21 21.8.5 Sy stem Log Note this functi on is only available for firm ware V2.12 or earlier and is not available for Target Series . For the supported versions, see Appendix F . The System Log records the events in the four types of logs: System Event , Monitoring Event , I/O Event and Login/Logout Event .
4. Click Query . The filteri ng results may look like the figure below. Figure 21-42 378.
Administrator Mode 21 21.8.6 T ools You can execute certain system operations and view the firmware version. Figure 21-43 379.
[Host Settings] Enter a descriptive nam e for the camera. [Auto Re boot Setup] Sele ct Ena ble to activat e automatic reboot and specify t he time for reboot in the sub fields. Da y Interval: Type the day interval bet ween each reboot. Reboot Time: Use the drop-down lists to specify the time for automatic reboot.
Administrator Mode 381 21 21.8.7 Langua ge Note t his function i s not available in GV -PTZ010D . You can select the language for the Web int erface. Figure 21-44 Use the Language drop-dow n list to select a language for the Web interface. By default, the language on the W eb interface will be the same with the one used for the operating syst em.
Chapter 22 Recording and Playback Note that Recordi ng and Playback function is not available for Tar get Series . The GV-IPCAM H.264 can record video and audio directl y to the memory card. You can play back the recorded files on the GV-System or over the TCP/IP network.
Recording an d Playback 22 22.2 Play back These methods are availabl e to play back the video files recorded at the GV-IPCAM H.264: • Playback f rom the memory card by connecting it directl y to the.
1. Inst all the Ext2Fs d from the Software CD. Note: If you are us ing Windo ws 8 or Windows Server 2012 , change its compatibility be fore installing the Ext2Fsd program: A. Right-click t he Ext2Fsd program and select Properties . Th is dialog box appears.
Recording an d Playback 22 2. On Your desktop, click Start , sele ct Pro grams , locate the Ext2 Fsd folder and select Ext2 Volume Manager . All the connected drives are shown.
3. For the first-inst allation, execute the Ext2Fsd Service. A. From the Ext2 Volume Manager window, select Tools and select Service Management . This dialog box appears.
Recording an d Playback 22 4. Mount the storage drive to your com puter. A. From the Ex t2Fsd Volume Manager window, right-click the storage drive and select Ext2 Management .
C. On the Ext2 Volume Manager window, the storage drive is successf ully mounted to your computer when it is indicat ed w ith the disk drive you specified.
Recording an d Playback 22 22.2.2 Pla yback over Net wo rk With the Remote ViewLog functi on, you can play back the files recorded at the GV-IPCAM H.264 over TCP/IP network. 1. The camera needs to allow the remote access with Vi ew Log S er ver activat ed.
22.2.3 Access to the Recorded Files through FTP Se rver The built-in FTP Server allows you to download the recorded fi les saved on the memory card. You can play back the downloaded files of AVI form at with Media Player. For details t o dow nload files, s ee [Act as FTP Server], 21.
Recording an d Playback 22 22.2.4 Pla yback of Daylig ht Savin g Time Ev ents On GV-System, you can retrieve the event s recorded during the Daylight Saving Time (DST) period from the GV-IPCA M H.264 for playback. You can also connect the memory ca rd to GV-System for playback.
392 5. On the Video Event list, select desired events , and click the Pl ay button to s tart. Note: 1. The playback function is onl y compatible with the GV-System of version 8.3 and later. 2. The AVI file recorded during the DST period is named with the prefix “GvDST”, e.
Chap ter 23 A dv anced A pplication s This chapter introduces more advanced applications. 23.1 Upgrading Sy stem Firm ware GeoVision periodic ally releases updated firm ware on the w ebsite. Sim ply download the new firmware into the GV-IPCA M H.264 using the Web interface or IP Device Utility included in the Software CD.
WA R N I N G : The interruption of pow er supply during updat ing causes not only update fai lures but also damages to the camera. In this case, please contact your sal es representative and send your devic e back to GeoVision for repair. 7. Do not turn the power off within 10 minutes after the firmware is updated.
Advanced Applications 23 23.1.1 U sing the W eb Con figuration Interfac e 1. In the Live View window, click the Show System Menu button (No. 8, Figure 20-3) and select Remote Conf ig . This dialog box appears. Figure 23-2 2. Click the Browse button t o locate the firmware f ile (.
23.1.2 Using the I P Device Utilit y The IP Device Utility provi des a direct way to upgrade the firmware to multipl e units of GV-IPCAM H.264. Note the computer used to upgrade firmware must be under the same network of the camera.
Advanced Applications 23 4. Double-click one camera in the list. This dialog box appears. Figure 23-4 397.
5. Click the F irmware Upgra de tab. This dialog box appears. Figure 23-5 6. Click the Browse button to locate the firm ware file (.img) saved at your local comput er. 7. If you lik e to upgrade al l the cam eras in the l ist, select Upgrade all devices .
Advanced Applications 23 23.2 Backing Up and Restoring Settings With the IP Device Utility included in the Softw are CD, you can back up the configurat ions in the GV-IPCAM H.264, and restore the backup data to the current camera or import it to another camera.
5. Type Password , and click the Export settings button to save the backup f ile. To restore the settings: 1. In Figure 23-4, click the Import Sett ings tab. This dialog box appears. Figure 23-7 2. Click the Bro wse butt on to locate the backup fi le (.
Advanced Applications 23 23.3 Restoring to Factory Default Settings Please refer t o the corresponding section of your camera type and follow the steps t o restore factory default sett ings. Box Camera 1. Keep the power and network cables connected t o the camera.
Ultra Box Camera and Target Box Camera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to press and hold the def ault button on the back panel of the camera. De faul t bu tton Figure 23-10 3. Release the default button w hen the status LED blinks.
Advanced Applications 23 Mi ni Fi xed Do me 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Press and hold the default bu tton . Defa ult b utt on Status LE D Figure 23-12 (GV-MFD120 / 130 / 220 / 320 / 520) Figure 23-13 (GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Seri es / 5301 Series) 3.
Mini Fixed Rugged Do me 1. Keep the PoE cabl e connected to the c amera. 2. Press and hold the default bu tton . Stat us L ED Default button Figure 23-14 3.
Advanced Applications 23 Target Mini Fixed Dome a nd Target Mini Fixed Rugged Dome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Press and hold the default button for about 8 seconds. Figure 23-15 3. Release the default button w hen the status LED blink s.
Bullet Camera 1. Keep the power and network cables connected t o the camera. 2. Loosen the camera’s cover and rem ove the Si lica G el B ag . 3. Press and hold the default button for 8 s econds. Default Bu tton Figure 23-16 4. the process of loading default ltra Bullet Camera nd network cables (or PoE) connected to the hold the default b utto n.
Advanced Applications 23 3. lt button w hen the status LED blinks. This shall the process of loading default settings is arget Bullet Camera d network cables (or PoE) connected to the e camera’s cover. tton for about 8 seconds. Release t he defau take about 8 seconds.
PTZ Ca mera There are two types of default settings: camera default settings and system default settings . Camera default settings include all setti ngs on Iris, White Balanc e, Image Reverse and Other in the VISCA OSD Configurati on dialog box (Figure 12-19).
Advanced Applications 23 4. Hold t he default button until the two network LEDs fade. This will take about 25 seconds. Network LEDs Figure 23-20 5. When default loading is completed , the camera will pan and tilt to its full range and return to the home point.
Vandal Proof IP D ome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Use a pin to press and hold the def ault button on the inner housing. Status LED Default button Figure 23-22 3. Release the default button w hen the status LED blinks.
Advanced Applications 23 Fixed IP Dome 1. Keep the power and network cables (or PoE) connected to t he camer a. 2. Use a pin to press and hold the def ault button on the panel. Default b utton Sta tus LED Figure 23-23 3. Release the default button w hen the status LED blinks.
Cube Camera 1. Keep the power and network cables connected t o the camera. 2. Use a pin to press and hold the def ault button on the panel. Status LED Default button Figure 23-24 3. R ault button when the status LED blinks. This shall urns orange, the process of loading def ault dvanced Cube Camera etwork cables connected to the camera.
Advanced Applications 23 3. R fault button when the status LED blinks. This shall take about 8 seconds. he camera is ready for use. elease t he de 4. W hen the status LED turns green, the process of l.
23.4 Changing P assword You change the login password of your GV-IP Camera using GV-IP Devic e Utility. 1. Make sure you have installed and executed GV-I P Device Utility. For details, see steps 1 to 3 in 24.1.2 Using the GV-IP Device Utility . This page appears.
Advanced Applications 23 2. Double-click one camera in the list. This window appears. Figure 23-27 3. Type Password , click , select Oth er Settings and then s elect Change Password .
4. Type the new password in both fields. To change devices of the same type t o the same pass word, select Sync all devices . 5. Click OK to apply the change.
Advanced Applications 23 23.5 Verify ing Watermark The watermark is an encrypted and digit al signature embedded in the video stream during t he compression stage, protecting t he video from the moment of creation. Watermark ing ensures that an image is not edited or damaged after it is recorded.
23.5.2 Running Wa termark Proof 1. Inst all Watermark Proof fro m the So ftwa re CD . Afte r insta llatio n, a WMProof icon is created on your desktop. 2. Double-c lick the c reated icon. The Water Mark P roof window appears . 3. Click File from the menu bar, select Open and locate the recording (.
Advanced Applications 23 23.5.3 T he Waterma rk Pr oof Win dow Figure 23-29 The controls in the window: No. Name Descripti on 1 Open File Opens the recording. 2 F ir st Fr am e Goe s to t he f i rst fr am e of th e fi l e. 3 Play Plays the file . 4 Previous Frame Goes to the previous f rame of the f ile.
23.6 Downloading Vi deos from the Micro SD Card When connections of GV-I P Cameras to the GV-System are lost, recordings are autom atically saved to the memory cards i nserted in the GV-IP Cameras.
Advanced Applications 23 23.6.1 Inst alling the GV-SDCard Sync Utilit y 1. Download the GV-SD Card Sync Utility program from http://ft p.geovision.tw/FTP/neo/ Utility/GvSDCardS ync_Setup.zi p Note: The GV-SD Card Sync Utility must be install ed on the computer instal led w ith GV- Sys tem V8.
3. To configure synchronizati on, network and startup settings, see the steps below. Figure 23-31 [Sy nchronization] Synchronize automatically at an interval: Au tomati cally synchronize vi deos from micro SD cards to a local folder at the specified i nterval.
Advanced Applications 23 [Network] Max. download speed of each device (Kb/sec): To ma ke sur e the bandwidth is not completel y taken up while dow nloading fil es from the m emory c ard, specify a maximum download s peed. If you do not want to set a bandwidth limit, type 0 .
[Recycle] Rec ycle when the storage spac e is less than (GB): Spec i fy a minimum free space of your local st orage for file recycling. Keep the downloaded files for (D ays): Specify the number of days to keep the download files at the local hard drive.
Advanced Applications 23 23.6.2 T he GV-SDCardSync Utilit y Window After you have inst alled the GV-SDCardSync Util ity, point to Start , select Programs , select GV -S DCa rdS yn c and select to launch the program. This window appears. 1 2 3 4 5 6 Figure 23-33 No.
426 No. Name Descripti on 5 Log Tab Displays up t o 100 event entries of the GV- SDCar dSync Ut ility. On ce th e entri es are full, recycling will star t from the olde st file. 6 Storage Space Shows the storage space of the designated hard drive. Note: 1.
Chapter 24 DV R Config urations The GV-System provides hybrid sol ution, integrat ing the digital videos from IP cameras with other analog vi deos. For the digital videos, the GV-System provides the com plete video management, such as video viewing, recording, pl ayback, alert setti ngs and almost every feature of the system.
• The compatible version of GV-Syst em for each camera model: Camera Models Compatible version of GV-Sy stem GV-BX120D GV-BX220D Series GV-BX320D Series V8.
DVR Configurations 24 Camera Models Compatible version of GV-Sy stem GV-BX120D-E GV-BX220D-E GV-BX320D-E GV-BX520D-E V8.4 or late r GV-BX1500-E V 8.5.8 or later IR Ar ctic Camera GV-BX2400-E GV-BX3400-E GV-BX5300-E V8.5.7 or la ter GV-MFD120 GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 V8.
Camera Models Compatible version of GV-System Target Mini Fixed Dome GV-EFD1100 Series GV-EFD2100 Series V8.5.9 or la ter Target Mini Fixed Rugged Dome GV-EDR1100 Seri es GV-EDR2100 Seri es V8.5.9 or la ter GV-BL120D GV-BL220D GV-BL320D V8.4 (with patch fil es) or late r GV-BL130D V8.
DVR Configurations 24 Camera Models Compatible version of GV-System GV-UBL1211 GV-UBL2411 GV-UBL3411 GV-UBL1301 Seri es GV-UBL2401 Seri es GV-UBL3401 Seri es V8.5.6 or la ter GV-UBL1511 V8. 5.8 or later Ultra Bullet Camera GV-UBL2511 V8. 5.9 or later Target Bullet Camera GV-EBL1100 Series GV-EBL2100 Series V8.
Camera Models Compatible version of GV-Sy stem GV-FD120D GV-FD220D GV-FD320D V8.4.3 (w ith patch files) o r later GV-FD1200 GV-FD2400 GV-FD3400 GV-FD5300GV- FD1210 GV-FD2410 GV-FD3410 V8.5.7 or la ter GV-FD1500 GV-FD1510 V8.5.8 or la ter Fixed IP Dome GV-FD2500 GV-FD2510 V8.
DVR Configurations 24 • The maximum num ber of streams which the GV -IPCAM H.264 allows varies accordi ng to its resolution: Camera Models M a x. N o. of S tr eam s GV-PTZ010D 3 1.3 M models except GV-PTZ010D 8 2 M models 3 M models 5 M models 6 • When a GV-IPCAM H.
24.1 Setting up an IP Camera To set up the GV-IPCAM H.264 on the GV-System, follow these steps: 1. On t he main screen, click the Configure button, select Sy s te m Configure , sele ct Camera Install and click IP Camera Install . Th is dialog box appears.
DVR Configurations 24 2. Click A dd Camera . The dialog box appears. Figure 24-3 3. Type the IP address, username and password of the IP camera. Select t he camera brand and device f rom the drop-down lists.
5. The options in the setup dialog box may vary depending on the camera model. Dual S tream: Cl ick this button t o set t he codec t ype to H.264 i n the main stream and to MJPEG in the sub stream, and each stream with a different resol ution. For details on supported versions and resol utions in different cameras, see Appendix G .
DVR Configurations 24 24.1.1 Custo mizing I P Ca mera Settin gs After the IP camera is connected and assi gned with a display position, you can conf igure the cam era’s settings s uch as f rame rate, codec type and resoluti on.
~ Li ve-view Key Frame only : You can c hoose to view the key frames of the videos onl y instead of all frames on the live view. This option i s related t o the GOP sett ing of the IP camera. For example, if the GOP value is set to 30, there is only one key frame among 30 frames.
DVR Configurations 24 24.2 Re mote Monitoring with Multi V iew You can use the Multi View to monit or and m anage the GV-IPCAM H.264. 24.2.1 Connecting to the IP Camera 1. On the Multi View w indow, cl ick the Edit Host button. The Edit Host window appears.
24.3 Re mote Monitoring with E-Ma p You can use the Remote E-Map to monitor and manage the GV-IPCAM H.264. 24.3.1 C reating an E-M ap for th e IP Camera With the E-Map Editor, you can create an E-Map for the GV-IPCAM H.264. The E-Map Editor is available in the two applications: Main Syst em and E- Map Server.
DVR Configurations 24 7. Click OK to save the sett ings . 8. Expand the created host folder. Drag and drop the icons of camera and I/O devices onto the import ed E-Map.
442 24.3.2 Connecting to the IP Camera Depending on where you save the creat ed E-Map file (DVR, E-Map Server or Control Center), t he steps t o open the Remote E-Map window for monitoring may vary s lightly. The following is the connecti on ex ample when you store the E-Map file on the DVR.
CMS Co nfig uratio ns 25 Chapter 25 CM S Configuratio ns This section introduces the rel ated settings to enable connecting to the GV- IPCAM H.264 in the c entral monitoring s tations Center V2, VSM and Dispatch S erver. 25.1 Center V2 The Center V2 can m onitor and manage the c amera and I /O devices connected to the GV-IPCAM H.
• To set the appropri ate port for IP cam era connection, cl ick the Preference Settings button, sel ect S y stem Configure , click th e Network t ab, and select Accept connections fro m GV-Compact DVR, Vi deo Server & I P Cam . K eep default port 5551 , or m odify it to match the Center V2 port on the IP camera.
CMS Co nfig uratio ns 25 M anual close channel: Closes the triggered camera view manually. Cl ose the camera view when motion stopped: Clos es t he triggered cam era view automatically when motion stops. Post Motion: Specify the duration of the camera view remaining on the m onitoring window after a m otion stops.
25.2 VSM The VSM is designed to monitor and manage the camera and I/O devices connect ed to the GV-IPCAM H .264 under low bandwidth network. IP Camera IP Camera TCP/ IP VSM Text Data Figure 25-4 • To set the appropriate port connecting to the IP camera, click Configure on the window menu, and select Syst em Configure to display t his dialog box.
CMS Co nfig uratio ns 25 25.3 Dispat ch Serv er The Dispatch Server mi nimizes overloading of Cent er V2 Servers by re- distri buting GV-IPCAM H.264 subscribers to the least busy Center V2 Serv er.
448 • To set the appropriate port connecting to the IP camera, click t he Server Setting button on the toolbar, and select A llow G V IP devices to login as subscriber from port . Keep the default port as 5551 , or modify it to match the Center V2 port on the IP camera.
Smart De vice Conne ction 25 C h a p t e r 2 6 Smart Dev ice Connection You can access the live view and play back rec ordings on your mobile devices usi ng the mobile application GV-Eye . Android Smartphone, tablet, iPad, iPhone and iPod Touch are supported.
450 A ppendix A . Settings for Internet Explorer 8 If you use Internet Explorer 8, it is required to c omplete the following setting. 1. Set the Security to M edium -hig h (de fau lt) . 2. Enable A llow previousl y unused ActiveX controls to r un without prompt .
Appendix 451 B. Supported Lenses for Box Camer a Provide r Model No. RV0409D.IR RV0515D.IR Fujia n For ecam O pti cs RV0820D.IR EVD03618F-IR EVD04218F-IR EVD06018F-IR EVD08018F-IR EVD12018F-IR EVETAR .
452 C. Resolution and Frame Rate Note that the frame rate and the perform ance may vary depending on the number of connections and dat a bitrates (different scenes).
Appendix 453 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 4:3 1280 x 960 16:9 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-UBL1301 Series GV-UBL1511.
454 GV-IP Camera Stream Rati o Resolution M ax. Fr ame Rate 4:3 1600 x 1200 1280 x 960 16:9 1920 x 1080 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480 320 x 240 16:9 640 x 360 448 x 252 GV-BL220D GV-B.
Appendix 455 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 4:3 1280 x 960 640 x 480 320 x 240 16:9 1920 x 1080 1280 x 720 640 x 360 448 x 252 Ma in 5:4 1280 x 1024 640 x 512 320 x 256 4:3 6.
456 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 2048 x 1536 20 fps 4:3 1600 x 1200 1280 x 960 Ma in 16:9 1920 x 1080 1280 x 720 5:4 1280 x 1024 4:3 640 x 480 320 x 240 GV-BL320D GV-BL3400.
Appendix 457 GV-IP Camera Stream Rati o Resolution M ax. Fr am e Rate 2560 x 1920 10 f ps 2048 x 1536 20 f ps 4:3 1600 x 1200 1280 x 960 16:9 1920 x 1080 1280 x 720 Ma in 5:4 1280 x 1024 4:3 640 x 480.
458 D. Support Lists • Support L ist for GV-Backup Center, GV-Video Gate way and GV- Recording Server GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series V1.
Appendix 459 GV-IP Camera Model Supported Version GV-BL120D GV-BL220D GV-BL320D V1.03 or later Bullet Camera GV-BL130D V1. 04 or later PTZ Ca mera GV-PT Z010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.
460 • Support List for Transmit A udio GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series V1.05 or later GV-BX130D Series V1.04 or later GV-BX520D V1.05 or later Box Camera GV-BX1200 Series GV-BX1300 Series GV-BX2400 Series GV-BX3400 Series GV-BX5300 Series V1.
Appendix 461 GV-IP Camera Model Supported Version GV-BL120D GV-BL220D GV-BL320D V1.05 or later Bullet Camera GV-BL130D V1. 04 or later PTZ Ca mera GV-PTZ010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.
462 • Support List for Sy stem Log GV-IP Camera Model Supported Version GV-BX120D GV-BX220D Series GV-BX320D Series GV-BX130D Series GV-BX520D V1.11 or later Box Camera GV-BX1200 Series GV-BX1300 Series GV-BX2400 Series GV-BX3400 Series GV-BX5300 Series V1.
Appendix 463 GV-IP Camera Model Supported Version Bullet Camera GV-BL120D GV-BL130D GV-BL220D GV-BL320D V1.11 or later PTZ Ca mera GV-PTZ010D V1.08 or later GV-VD120D Seri es GV-VD220D Seri es Vandal Proof IP D ome GV-VD320D Seri es V1.11 or later Fixed IP Dome GV-FD120D GV-FD220D GV-FD320D V1.
464 E. RTSP Protocol Co mmand The GV-IPCAM H.264 can support RTSP protocol for both audio and video st re am in g. z If you use the Quic kTime player, enter: rtsp://<IP of the GV-IPCAM H.264:8554/<CH No.>.sdp For example, rtsp:// 192. 168.3.111 :8554/ CH001 .
Appendix 465 F. The CGI Comman d Please note the support ed version of the CGI command in different models: GV-IP Camera Supported Versio n GV-PTZ010D V1.
466 GV-IP Camera Supported Versio n GV-BX1200 Seri es GV-BX1300 Seri es GV-BX2400 Seri es GV-BX3400 Seri es GV-BX5300 Seri es GV-CA120 / 220 GV-CAW120 / 220 V1.15 or later You can use the CGI command to obtain a snapshot of the live view or access the User Account Web interface.
Appendix 467 G. Dual Stream Supp ort List The table lists the firmware versions of GV-IP Cameras that support dual stream and the default resolutions after t he camera is added to GV-System. Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.
468 Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.264) Sub Stre am (MJPEG) GV-BL130D GV-BX130D Series GV-MFD130 V1.04 or later GV-BX1300 Seri es V1.15 or later 1280 x 1024 320 x 256 GV-BX140DW V1.10 or later 1280 x 720 640 x 360 GV-BX220D Series V1.
Appendix 469 Resolution GV-IP Camera Supported Firmware Version Main St rea m (H.264) Sub Stre am (MJPEG) GV-BX320D Series V1.00 or later GV-BX3400 Seri es V1.15 or later GV-MFD320 V1. 05 or later GV-BX320D-E GV-MDR320 V1.07 or later GV-BL320D GV-VD320D GV-VD321D GV-VD322D GV-VD323D V1.
470 H. Power Supply Support List The supported power type is indicated with a tick ( 9 ) and the unsup ported power type with a cross ( 8 ). GV-IP Camera DC Power AC P ow e r PoE Box Camera 9 8 9 Ultr.
Appendix 471 GV-IP Camera DC Power AC P ow e r PoE Vandal Proof IP D ome 9 9 9 Fixed IP Dome 9 9 9 Cube Camera 9 8 8 GV-CA120/220 9 8 9 A dvanced Cube Camera GV-CAW120/220 9 8 8.
472 I. Supported Firmware for Flash Memory The 128 MB f lash memory is supported in V1.09 or l ater in all models of GV-IPCam H.264 Series except GV-PTZ010D. To look up if the camera contains a 128 MB type flash memory, access the we b interface or th e GV IP Dev ice Utility : z Web Interface Click Manage ment and click Tool s .
473 Specifications: Box Camera (Part 1) This section details the specifications on GV-BX120D / 130D S eries / 140DW / 220D Series / 320D Series / 520D . Camera GV-BX120D 1/3" progressi ve scan low lux CMOS GV-BX140DW 1/3" progressive scan CMOS Image Sensor GV-BX130D Series GV-BX220D Series GV-BX320D Series GV-BX520D 1/2.
474 Color 0.2 Lux B/W 0.08 Lux GV-BX140DW IR On 0 Lux Color 0.15 lux B/W 0.10 Lux Mini mum Illuminati on GV-BX220D Series GV-BX320D Series GV-BX520D IR On 0 Lux GV-BX140DW Au to mati c Shutter Speed G.
Specific ations: Box Came ra (P art 1) 475 GV-BX140DW Up to 100 dB Dy namic Range GV-BX120D GV-BX130D Series GV-BX220D Series GV-BX320D Series GV-BX520D Up to 72 d B Fixed Focal Lens (G V -BX130D-1 only) Megapixel Yes Day /Night Yes (w ith rem ovable IR-cut filter) Focal Length 4.
476 GV-BX120D GV-BX130D-0 GV-BX140DW GV-BX220D-3 2.8 ~ 12 mm GV-BX320D-0 3. 1 ~ 8 mm GV-BX220D-2 GV-BX320D-1 2.8 ~ 6 mm Focal Length GV-BX520D 4.5 ~ 10 mm GV-BX120D GV-BX130D-0 GV-BX140DW GV-BX220D-3 F/1.4 GV-BX320D-0 F/1. 2 GV-BX220D-2 GV-BX320D-1 F/1.
Specific ations: Box Came ra (P art 1) 477 Focus Manual (w/lock) Zoom Manual (w/loc k) GV-BX120D GV-BX130D-0 GV-BX220D Series GV-BX320D Series DC drive GV-BX140DW Fixed Operation Iris GV-BX520D Manual (w/lock) Max. Torque (Focus/ Zoom Scre ws) 0.049 N.
478 A udio Compressi on G.711, AA C (Optional) A udio Support Two-Way A udio Sensor Input 1 input (Dry Cont act) A larm Output 1 Digit al Output (200mA 5V DC) Note: 1. The frame rate and performance may vary depending on the number of connections and data bitrat es (different scenes ).
Specific ations: Box Came ra (P art 1) 479 16:9 640 x 360, 448 x 252 Stream 5:4 640 x 512, 320 x 256 4:3 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x .
480 Mech anical Temperature Detector Yes Power 2-pi n terminal block , PoE Ethernet Ethernet (10/100 Base-T), RJ-45 cable A udio 1 In (Using the built-in microphone or externally connect ing a microphone) 1 Out (Stereo phone jack, 3.
Specific ations: Box Came ra (P art 1) 481 Genera l Environment Temperature 0°C ~ 50°C (32°F ~ 122°F) Humidi ty 10% to 90% (no condensation) Power Source 12V DC / PoE Max. Power Consumption 7 W Dimens ions (L X W X H) 75.5 x75 x 54 mm (2.97’’ x 2.
482 Language Arabic / Bulgarian / Czec h / Danish / Dutch / English / Finnish / French / German / Greek / Hebrew / Hungarian / Indonesi an / Italian /Japanes e / Lithuanian / Norwegian / Persian / Pol.
Specific ations: Box Came ra (P art 2) 483 Specifications: Box Camera (Part 2) This section details the specifications on GV-BX1200 Series / 1300 Series / 1500 Series / 2400 Series / 2500 Series / 3400 Series / 5300 Series .
484 Color 0.15 Lux B/W 0. 10 Lux GV-BX1300 Seri es GV-BX5300 Seri es IR ON 0 Lux Color B/W 0.01 Lux GV-BX1500 Seri es IR ON 0 Lux Color 0.02 Lux B/W 0.
Specific ations: Box Came ra (P art 2) 485 GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2500 Seri es GV-BX5300 Seri es Up to 72 d B Dy namic Range GV-BX2400 Seri es GV-BX3400 Seri es Up .
486 GV-BX1200-2F GV-BX1300-2F GV-BX1500-2F GV-BX2400-2F GV-BX2500-2F GV-BX3400-2F 12 mm Focal Length GV-BX1500-8F GV-BX2400-8F GV-BX2500-8F GV-BX3400-8F GV-BX5300-8F 2.8 mm GV-BX1200-0F GV-BX1300-0F GV-BX1500-0F GV-BX2400-0F GV-BX2500-0F GV-BX3400-0F F/1.
Specific ations: Box Came ra (P art 2) 487 Maximu m A perture GV-BX1500-8F GV-BX2400-8F GV-BX2500-8F GV-BX3400-8F GV-BX5300-8F F/1.8 Mount CS GV-BX1200-0F GV-BX1300-0F GV-BX1500-0F GV-BX2400-0F GV-BX2.
488 GV-BX1200-0F 63° GV-BX1300-0F 49° GV-BX1500-0F 63° GV-BX2400-0F 58° GV-BX2500-0F 72° GV-BX3400-0F 61° GV-BX1200-1F 36° GV-BX1300-1F 26° GV-BX1500-1F 36° GV-BX2400-1F 32° GV-BX2500-1F 40.
Specific ations: Box Came ra (P art 2) 489 Torque (Focus Screw) 0. 049 N.m V a rifocal Lens (GV -BX1200-3V / BX1300-3V / BX1500-3V / BX2400-3V / BX2400-4V / BX2500-3V / BX3400-4V / BX3400-5V / BX5300-6V) Megapixel Ye s Day /Night Yes (with removable IR-cut filt er) GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2400-3V GV-BX2500-3V 2.
490 GV-BX1200-3V GV-BX1300-3V GV-BX1500-3V GV-BX2400-3V GV-BX2500-3V GV-BX2400-4V GV-BX3400-4V 1/2.7’’ GV-BX3400-5V 1/ 3’’ Image For mat GV-BX5300-6V 1/ 2’’ GV-BX1200-3V 87° ~ 31° GV-BX1.
Specific ations: Box Came ra (P art 2) 491 Torque (Focus / Zoom screws) 0.049 N.m Operation Video Compression H.264, MJPEG Video St rea m Dual streams from H.
492 Vide o Resolution 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448 x 252 G.
Specific ations: Box Came ra (P art 2) 493 4:3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, .
494 A udio 1 In (Using the built-in microphone or externally connecting a microphone) 1 Out (Stereo phone jack, 3.5 mm / 0.14”) GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2400 Seri e.
Specific ations: Box Came ra (P art 2) 495 Genera l Environment Temperature 0°C ~ 50°C (32°F ~ 122°F) Humidi ty 10% to 90% (no condensation) Power Sou rce 12V DC / Po E GV-BX1200 Seri es GV-BX1300 Seri es GV-BX1500 Seri es GV-BX2400 Seri es GV-BX3400 Seri es GV-BX5300 Seri es 9.
496 Web Interface Installation Management W eb-based configuration Maintenance Firmware upgrade through Web Browser or Utility A ccess from Web Browser Camera live view, video rec ording, change video.
Specifica tions: Ul tra Box Camera 497 Specifications: Ultra Box Came ra Camera Image Se nsor 1/2.5’’ progress ive scan CMOS GV-UBX1301 Series 1280 (H) x 1024 (V) GV-UBX2301 Series 1920 (H) x 1080 (V) Picture Eleme nts GV-UBX3301 Series 2048 (H) x 1536 (V) Color 0.
498 GV-UBX1301-1F GV-UBX2301-1F GV-UBX3301-1F 4 mm Focal Length GV-UBX1301-2F GV-UBX2301-2F GV-UBX3301-2F 8 mm GV-UBX1301-0F GV-UBX2301-0F GV-UBX3301-0F F/2.0 Maxi mum Ap e r t u r e GV-UBX1301-1F GV-UBX2301-1F GV-UBX3301-1F GV-UBX1301-2F GV-UBX2301-2F GV-UBX3301-2F F/1.
Specifica tions: Ul tra Box Camera 499 Operation Video Compression H.264, MJPEG Video St rea m Dual streams f rom H. 264 or MJPEG GV-UBX1301 Series 30 fps at 1280 x 1024 GV-UBX2301 Series 30 fps at 19.
500 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448.
Specifica tions: Ul tra Box Camera 501 Mech anical Temperature Detector Yes Power 2-pin t erminal block, PoE Ethernet E thernet (10/100 Base-T), RJ-45 cable A udio 1 In (Using the built-in microphone) 1 Out (Stereo phone jack, 3.5 mm / 0.14”) Connectors Local Storage Micr o SD card slot (SD/SDHC, vers ion 2.
502 Web Interface Installation Management Web-based configurati on Maintenance Firmware upgrade through Web Browser or Utili ty A ccess from Web Browser Camera live view, video rec ording, change vide.
Specific ations: Tar get Box Came ra 503 Spe ci fica ti ons: Tar get Box C amera Camera Image Se nsor 1/3’ ’ progr essive sc an lo w lux C MOS Picture El ements 1280 (H) x 1024 (V) Color 0.
504 Operation (Focus / Zoo m / Iris) Fixed IR L ED Qua nt ity 8 IR LEDs Max. IR Distance 15 m (50 ft) Operation Video Compression H.264, MJPEG Video St rea m Dual stream s from H.
Specific ations: Tar get Box Came ra 505 Network Interface 10/100 Eth ernet Protocol DHCP, DynDNS, FTP, HT TP, HTTPS, NT P, ONVIF (Prof ile S), QoS (DSCP), RTSP, SNMP, SMTP, TCP, UDP, UPnP, 3GPP/ISMA .
506 Web Interface Installation Management Web-based co nfigurati on Maintenance Fi rmware upgrade thro ugh W eb Bro wser or Utili ty A ccess from Web Browser Camera l ive vie w, video recor ding, cha .
Specific ations: IR Arc tic Box Came ra 507 Specifications: I R Arctic Box Camera Camera GV-BX120D-E 1/3" progress ive scan low lux CMOS GV-BX1500-E 1/3" progressive sc an super low lux CMOS GV-BX2400-E GV-BX3400-E 1/3.2" progress ive scan CMOS Image Sensor GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E 1/2.
508 Color 0.08 Lux B/W 0.05 Lux GV-BX2400-E GV-BX3400-E IR ON 0 Lux Color 0.15 Lux B/W 0.10 Lux Mini mum Illuminati on GV-BX220D-E GV-BX320D-E GV-BX520D-E GV-BX5300-E IR ON 0 Lux Shutter Speed A utoma.
Specific ations: IR Arc tic Box Came ra 509 Lens Megapixel Yes Day /Night Yes (with rem ovable IR-c ut filt er) Lens Ty pe Va rifoca l Focal Length GV-BX120D-E 2.8 ~ 12 mm GV-BX220D-E GV-BX320D-E 2.8 ~ 6 mm GV-BX1500-E GV-BX2400-E GV-BX3400-E 3 ~ 10.5 mm Focal Length GV-BX520D-E GV-BX5300-E 4.
510 GV-BX1500-E 81° ~ 29° GV-BX2400-E 73° ~ 27° GV-BX3400-E 78° ~ 28° Horizontal FOV GV-BX5300-E 70° ~ 34° Focus Manual ( w/lock) Operation Zoom M anual (w/loc k) GV-BX120D-E GV-BX1500-E GV-BX220D-E GV-BX2400-E GV-BX320D-E GV-BX3400-E DC drive Operation Iris GV-BX520D-E GV-BX5300-E Manual (w/lock ) IR Qua nt ity 4 Max.
Specific ations: IR Arc tic Box Came ra 511 GV-BX120D-E GV-BX1500-E 30 fps at 1280 x 1024 GV-BX220D-E GV-BX2400-E 30 fps at 1920 x 1080 GV-BX320D-E GV-BX3400-E 20 fps at 2048 x 1536 30 fps at 1920 x 1.
512 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 640 x 360, 448.
Specific ations: IR Arc tic Box Came ra 513 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5:4 1280 x 1024, 640 x 512, 320 x 256 4:3 640 x 480, 320 x 240 16:9 .
514 4 : 3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16 :9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Ma in Stream 5 : 4 1280 x 1024, 640 x 512, 320 x 256 4 : 3 640 x 4.
Specific ations: IR Arc tic Box Came ra 515 Power PoE Ethernet Ethernet (10/100 Base-T), RJ-45 cable A udio 1 In (externally connect ing a microphone) 1 Out (Stereo phone jack , 3.
516 GV-BX2400-E GV-BX3400-E 23 W Max . P owe r Consumption GV-BX5300-E 21.6 W Dimensions 100.5 x 100.5 x 317.5 mm (3.96’’ x 3.96’’ x 12.5’’) Weight 3.
Specific ations: IR Arc tic Box Came ra 517 Web Interface Installation Management W eb-based configuration Maintenance Firmware upgrade through Web Browser or Utility A ccess from Web Browser Camera l.
518 Ethernet Cable Length Max 100 m / 328 ft from GV-PA481 to IP device, CAT5 Power Inp ut A C 100V ~ 240V, 2A Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Dimensions (L x W x H) 138 x 104 x 38 mm (5.43’’ x 4.09’’ x 1.5’’) Weight 610 g (13.
Specific ations: Mi ni Fixed Dome (Part 1) 519 Specifications: Mini Fixed D ome (Part 1) This section details the specifications on GV-MFD120 / 130 / 220 / 320 / 520 . Camera GV-MFD120 1/3" progressi ve scan low lux CMOS Image Sensor GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1/2.
520 GV-MFD120 50 dB S/N Ratio GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 45 dB WDR Yes Dynamic Range Up to 72 d B Lens Megapixel Yes Day /Night Yes (elect ronic) Lens Ty pe Fixed GV-MFD120 4.05 mm Focal Length GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 2.54 mm GV-MFD120 F/1.
Specific ations: Mi ni Fixed Dome (Part 1) 521 GV-MFD120 67° GV-MFD130 85° GV-MFD220 101° GV-MFD320 110° Horizontal FOV GV-MFD520 138° Operation (Focus / Zo om / Ir is) Fixed Note: For GV-MFD, the day/night function is only supported by V1.07 or later.
522 Note : The frame rate and performance may vary depending on the number of connections and data bitrat es (different scenes ). Vide o Resolution 4:3 1280 x 960, 640 x 480, 320 x 240 16:9 1280 x 720.
Specific ations: Mi ni Fixed Dome (Part 1) 523 4:3 2560 x 1920, 2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Main St rea m 5:4 1280 x 1.
524 A udio GV-MFD120 GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 1 In (Built-in microphone) Connectors Local Storage Micr o SD card slot (SD /SDH C, version 2.0 onl y, Class 10) LED Indicator 4 LEDs: Link, ACT, Power, Status Note: SDXC and UHS-I card types are not supported.
Specific ations: Mi ni Fixed Dome (Part 1) 525 GV-MFD120 275 g (0.61 lb) Weight GV-MFD130 GV-MFD220 GV-MFD320 GV-MFD520 280 g (0.62 lb) Regulatory CE, FCC, C-T ick, UL, RoHS complian t Pow er over Et hernet PoE Stan dard IEEE 802.3af Power over Ethernet / PD PoE Pow er Suppl y Type End-Span and Mid-Span PoE Pow er Outpu t Per Port 48V DC, 350 mA.
526 Language Arabic / Bulgarian / Czech / Danish / Dutch / E nglish / Finnish / French / German / Greek / Hebrew / Hungarian / Indonesian / Itali an /Japanese / Lithuanian / Norwegian / Persian / Poli.
Specific ations: Mi ni Fixed Dome (Part 2) 527 Specifications: Mini Fixed D ome (Part 2) This section details the specifications on GV-MFD1501 series / 2401 series / 2501 series / 3401 series / 5301 series . Camera GV-MFD1501 Series 1/3’’ progressive s can super low lux C MOS GV-MFD2501 Series 1/2.
528 Shutter Speed Automatic, Manual (1/5 ~ 1/8000 sec) White Balance Automatic, Manual (2800K ~ 8500K) Gain Co ntrol Auto matic GV-MFD1501 Series GV-MFD2401 Series GV-MFD3401 Series GV-MFD5301 Series .
Specific ations: Mi ni Fixed Dome (Part 2) 529 GV-MFD1501 -1F GV-MFD2401 -1F GV-MFD2501 -1F GV-MFD3401 -1F GV-MFD5301 -1F 4 mm GV-MFD1501 -2F GV-MFD2401 -2F GV-MFD2501 -2F GV-MFD3401 -2F GV-MFD5301 -2.
530 GV-MFD1501 -2F GV-MFD1501 -3F GV-MFD2401 -2F GV-MFD2401 -3F GV-MFD2501 -2F GV-MFD2501 -3F GV-MFD3401 -2F GV-MFD3401 -3F GV-MFD5301 -2F GV-MFD5301 -3F F/1.6 Maxi mum Ap e r t u r e GV-MFD1501 -4F GV-MFD2401 -4F GV-MFD2501 -4F GV-MFD3401 -4F F/1.8 Mount M12, Pitch 0.
Specific ations: Mi ni Fixed Dome (Part 2) 531 GV-MFD2501 -2F 38° GV-MFD3401 -2F 33° GV-MFD5301 -2F 41° GV-MFD1501 -3F 22° GV-MFD2401 -3F 20° GV-MFD2501 -3F 25° GV-MFD3401 -3F 21° GV-MFD5301 -3.
532 Image Setti ng Brightness , Contrast, Saturation, Sharpness, Gamma, White Balance, Flicker-less 50/60 Hz, Image Orientati on, Shutter Speed, Backlight Compensat ion, D/N sensitivit y, WDR, Defog, Super Low Lux, Denoise, Metering A udio Compressi on G.
Specific ations: Mi ni Fixed Dome (Part 2) 533 4:3 1600 x 1200, 1280 x 960, 640 x 480, 320 x 240 16:9 1920 x 1080, 1280 x 720, 640 x 360, 448 x 252 Main St rea m 5:4 1280 x 1024, 640 x 512, 320 x 256 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Geovision GV-UBL1301-0F c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Geovision GV-UBL1301-0F - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Geovision GV-UBL1301-0F, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Geovision GV-UBL1301-0F va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Geovision GV-UBL1301-0F, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Geovision GV-UBL1301-0F.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Geovision GV-UBL1301-0F. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Geovision GV-UBL1301-0F ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
