Manuel d'utilisation / d'entretien du produit 4010 du fabricant Garmin
Aller à la page of 68
GPSMAP ® 4000/5000 Series owner ’ s manual.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
GPSMAP ® 4000/5000 Series Owner ’s Manual i Introduction Introduction This manual includes information for the following products: GPSMAP ® 4008 GPSMAP ® 4010 GPSMAP ® 4012 GPSMAP ® 5008 GPSMAP ® 5012 GPSMAP ® 5015 T ips and Shortcuts Press or touch HOME from any screen to return to the Home screen.
ii GPSMAP ® 4000/5000 Series Owner ’s Manual Introduction T able of Contents Introduction ................................................ i T ips and Shortcuts ........................................... i Manual Conventions ......................
GPSMAP ® 4000/5000 Series Owner ’s Manual 1 Getting Started Getting Started Getting Started Unit Overview SD card slot Automatic backlight sensor GPSMAP 4012 POWER RANGE (+/-) ROCKER MARK SELECT HOME MENU Numeric keypad (GPSMAP 4010 and 4012) Soft keys NOTE: Use the soft keys to select menu items on the GPSMAP 4000 Series.
2 GPSMAP ® 4000/5000 Series Owner ’s Manual Getting Started Getting Started Power connector Marine video connector NMEA 2000 connector NMEA 0183 connector Garmin Marine Network connectors T urning the Unit On or Off T o turn the unit on, press and release the Power key .
GPSMAP ® 4000/5000 Series Owner ’s Manual 3 Getting Started Getting Started Minimum Safe Depth —select the minimum safe depth for your boat. Refer to your boat specications for more information. Minimum Overhead Clearance —select the minimum overhead clearance for your boat.
4 GPSMAP ® 4000/5000 Series Owner ’s Manual Getting Started Getting Started Inserting and Removing SD Cards Y our unit supports Secure Digital (SD) cards. Insert optional BlueChart ® g2 V ision ® SD cards to view high-resolution satellite imagery , and aerial reference photos of ports, harbors, marinas, and other points of interest.
GPSMAP ® 4000/5000 Series Owner ’s Manual 5 Getting Started Getting Started Understanding the Home Screen Use the Home screen to access all other screens. Select Home from any screen to return to the Home screen. NOTE: Options on this screen vary based on the unit type.
6 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts Using Charts Y our unit has a basic worldwide imagery map. By purchasing an optional Blue Chart g2 V ision preprogrammed SD car.
GPSMAP ® 4000/5000 Series Owner ’s Manual 7 Using Charts Using Charts Understanding Chart Data BlueChart g2 and BlueChart g2 V ision charts use graphic symbols to denote map features, which follow the standards for US and international charts.
8 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts As you pan the map, a list of options appears along the right side. The options change as you move the map pointer over various objects and charts.
GPSMAP ® 4000/5000 Series Owner ’s Manual 9 Using Charts Using Charts Changing the Navigation Chart Settings T o change the Navigation chart settings from the Home screen, select Charts > Navigation Chart > Menu > Chart Setup . Photos —sets the high-resolution satellite images to off, land only , or blend.
10 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts Understanding How Wind VMG and W aypoint VMG Are Displayed in the Data Bars The chartplotter automatically switches between displaying W ind V elocity Made Good (VMG) and W aypoint VMG in the data bars.
GPSMAP ® 4000/5000 Series Owner ’s Manual 1 1 Using Charts Using Charts Light Sectors —turns the sector in which a navigational light is visible on or off.
12 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts Surface Radar —display radar reections from the surface of the water when the unit is connected to a marine radar ( page 39 ). Perspective 3D With Surface Radar Information Data Bars —show or hide cruising, navigation, shing, fuel, or sailing numbers ( page 9 ).
GPSMAP ® 4000/5000 Series Owner ’s Manual 13 Using Charts Using Charts T o save the active track: 1. From the Home screen, select Information > User Data > T racks > Save Active T rack . 2. Select either the time the current track began (or Midnight , if shown) or Entire Log .
14 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts Resolution —records the track plot based on a variance from your course. This setting is recommended for the most-efcient use of memory . The distance value ( Change ) is the maximum error allowed from the true course before recording a track point.
GPSMAP ® 4000/5000 Series Owner ’s Manual 15 Using Charts Using Charts Press the RANGE (+) key (GPSMAP 4000 series) or touch the key (GPSMAP 5000 series) to move the view closer to your boat and lower to the water . Press the RANGE (-) key (GPSMAP 4000 series) or touch the key (GPSMAP 5000 series) to move the view away from the boat.
16 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts Using Fish Eye 3D Using the depth contour lines of the BlueChart g2 V ision cartography , Fish Eye 3D provides an underwater view of the sea oor or lake bottom. Use the RANGE keys (GPSMAP 4000 series) or the and keys (GPSMAP 5000 series) to adjust the view .
GPSMAP ® 4000/5000 Series Owner ’s Manual 17 Using Charts Using Charts The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 V ision SD card, and is best for offshore deep-sea shing.
18 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Charts Using Charts V iewing Aerial Photos Preprogrammed BlueChart g2 V ision SD cards contain aerial photographs of many landmarks, marinas, and harbors. Use these photos to help orient yourself to your surroundings or to acquaint yourself with a marina or harbor prior to arrival.
GPSMAP ® 4000/5000 Series Owner ’s Manual 19 Using Combinations Using Combinations Using Combinations Use the Combinations screen to view a combination of different screens at the same tim e.
20 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Combinations Using Combinations T o customize the screen combinations: 1. While viewing the Combinations screen, select Menu > Change Combination , or , from the Home screen, select Combinations > Unused Combo (if one is available).
GPSMAP ® 4000/5000 Series Owner ’s Manual 21 Where T o? Where T o? Where T o? Use the Where T o? option on the Home screen to search for , and navigate to, waypoints, routes, and services such as nearby fuel, repairs, and ramps. NOTE: Y ou must create waypoints and routes before you can navigate to them.
22 GPSMAP ® 4000/5000 Series Owner ’s Manual Where T o? Where T o? 4. Select Navigate T o . 5. Select Go T o . OR Select Guide T o when using a preprogrammed BlueChart g2 Vision card to use Auto Guidance. 6. Follow the colored line on the screen to the destination.
GPSMAP ® 4000/5000 Series Owner ’s Manual 23 Where T o? Where T o? Creating and Using W aypoints Y ou can store up to 1,500 waypoints with a user-dened name, symbo l, depth, and water temperature for each waypoint. T o create a new waypoint: 1. From the Home screen, select Charts > Navigation Chart .
24 GPSMAP ® 4000/5000 Series Owner ’s Manual Where T o? Where T o? T o edit an existing waypoint: 1. From the Navigation chart, use the map pointer ( ) (GPSMAP 4000 series) or touch the waypoint (GPSMAP 5000 series) to highlight the waypoint on the Navigation chart.
GPSMAP ® 4000/5000 Series Owner ’s Manual 25 Where T o? Where T o? Creating and Using Routes Y ou can create and store up to 20 routes with up to 250 waypoints each.
26 GPSMAP ® 4000/5000 Series Owner ’s Manual Where T o? Where T o? T o create a route using Auto Guidance (when using a preprogrammed BlueChart g2 Vision card): 1. From the Navigation chart, select your destination. 2. Select Navigate T o > Guide T o .
GPSMAP ® 4000/5000 Series Owner ’s Manual 27 Viewing Information Viewing Information V iewing Information Use the Information screen to access information about tides, currents, celestial data, user data, other boats, gauges, and video.
28 GPSMAP ® 4000/5000 Series Owner ’s Manual Viewing Information Viewing Information V iewing Celestial Information Use the Celestial screen to view celestial data for sunrise, sunset, moonrise, moonset, moon phase, and approximate sky view location of the sun and moon.
GPSMAP ® 4000/5000 Series Owner ’s Manual 29 Viewing Information Viewing Information 9. Complete one of the following: Select Merge From Card to transfer data from the SD card to the unit and combine it with existing user data. Select Replace From Card to overwrite the data on your unit.
30 GPSMAP ® 4000/5000 Series Owner ’s Manual Viewing Information Viewing Information Select Add New File to create a new le. Enter the le name using the ROCKER (GPSMAP 4000 series) or onscreen keyboard (GPSMAP 5000 series) and select Done . 4.
GPSMAP ® 4000/5000 Series Owner ’s Manual 31 Viewing Information Viewing Information V iewing Fuel Gauges T o view fuel gauges from the Home screen, select Information > Dashboard Gauges > Fuel .
32 GPSMAP ® 4000/5000 Series Owner ’s Manual Conguring the Chartplotter Conguring the Chartplotter Conguring the Chartplotter Use the Congure screen to congure unit settings. Conguring System Settings T o change general system settings from the Home screen, select Congure > System .
GPSMAP ® 4000/5000 Series Owner ’s Manual 33 Conguring the Chartplotter Conguring the Chartplotter Conguring Units of Measure T o change units of measure from the Home screen, select Congure > Pr eferences > Units . System Units —global setting that denes individual units of measure at the same time.
34 GPSMAP ® 4000/5000 Series Owner ’s Manual Conguring the Chartplotter Conguring the Chartplotter T o enable or disable NMEA 0183 output sentences: 1. From the Home screen, select Congure > Communications > NMEA 0183 Setup > Output Sentences .
GPSMAP ® 4000/5000 Series Owner ’s Manual 35 Conguring the Chartplotter Conguring the Chartplotter Anchor Drag —set an alarm to sound when you exceed a specied drift distance. Off Course —set an alarm to sound when you are off course by a specied distance.
36 GPSMAP ® 4000/5000 Series Owner ’s Manual Conguring the Chartplotter Conguring the Chartplotter Safe Height —set the minimum height (chart height datum) of a bridge that your boat can safely travel under . Shoreline Distance —set how close you want to travel near the shore: Near est , Near , Normal , Far , or Farthest .
GPSMAP ® 4000/5000 Series Owner ’s Manual 37 Using the Garmin Marine Network Marine Network Using the Garmin Marine Network The Garmin Marine Network allows you to share data from Garmin peripheral devices between Garmin chartplotters quickly and easily .
38 GPSMAP ® 4000/5000 Series Owner ’s Manual Using the Garmin Marine Network Marine Network V iewing Connected Garmin Marine Network Devices T o view all connected Garmin Marine Network devices, from the Home screen, select Congure > Communications > Marine Network .
GPSMAP ® 4000/5000 Series Owner ’s Manual 39 Using Radar Using Radar Using Radar When you connect your chartplotter to an optional Garmin marine radar such as a GMR 404/406 or a GMR 18, you can view more information about your surroundings.
40 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Radar Using Radar Using Cruising Mode Cruising mode is the standard radar operation. If you switch from Sentry mode to Cruising mode, the antenna will go into full-time transmission and will disable any guard zones.
GPSMAP ® 4000/5000 Series Owner ’s Manual 41 Using Radar Using Radar 2. Select from the following options: Corner 1 (and Corner 2 ): Use the ROCKER (GPSMAP 4000 series) as indicated by the arrows ( and ) to dene the size of the guard zone. Select Corner 1 or Corner 2 to change the reference point.
42 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Radar Using Radar MARP A T arget (only appears when you are targeting a tagged MARP A object)—opens the MARP A target information window .
GPSMAP ® 4000/5000 Series Owner ’s Manual 43 Using Radar Using Radar Reducing Unwanted Noise There are several options that adjust the gain to help reduce unwanted clutter on the radar screen. T o reduce unwanted noise: 1. From the Radar screen, select Menu > Noise Rejection .
44 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Radar Using Radar T o customize safe-zone settings: 1. From the Radar screen, select Menu > Other V essels > Collision Alarm . 2. Select from the following options: Range —change the measured radius of the safe zone ring to a specied distance from 500 ft.
GPSMAP ® 4000/5000 Series Owner ’s Manual 45 Using Sonar Using Sonar Using Sonar When connected to an optional Garmin GSD 22 sounder module and a transducer , your chartplotter can be used as a shnder . The GSD 22 connects through the Garmin Marine Network and shares sonar data with every chartplotter connected to the network.
46 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Sonar Using Sonar Understanding the Split Frequency Screen Use the Split Frequency screen (dual-frequency transducer only) to view both the 50 kHz and 200 kHz frequencies on the same screen. A 200 kHz frequency graph appears on the left; a 50 kHz frequency graph appears on the right.
GPSMAP ® 4000/5000 Series Owner ’s Manual 47 Using Sonar Using Sonar Setting Up Sonar Use the Sonar Setup screen to dene and adjust settings universal to all sonar screens. From the Home screen, select Sonar > Sonar Setup . Fish Symbols —set how the sonar interprets suspended targets.
48 GPSMAP ® 4000/5000 Series Owner ’s Manual Using Sonar Using Sonar Advanced Sonar Settings T o adjust advanced sonar settings, select Menu while viewing a sonar screen. Gain —controls the sensitivity of the sonar receiver ( Auto or , to adjust manually , Up or Down ).
GPSMAP ® 4000/5000 Series Owner ’s Manual 49 Digital Selective Calling DSC Digital Selective Calling (DSC) Using the Chartplotter with a VHF Radio The following table indicates the features that are available when you connect your chartplotter to a VHF radio over a NMEA 0183 network or a NMEA 2000 network.
50 GPSMAP ® 4000/5000 Series Owner ’s Manual Digital Selective Calling DSC V iewing the DSC List The DSC List is a log of the most-recent DSC calls and other DSC contacts you have entered. The DSC List can contain up to 100 entries. The DSC List shows the most-recent call from a boat.
GPSMAP ® 4000/5000 Series Owner ’s Manual 51 Digital Selective Calling DSC Position T racking When you connect your Garmin chartplotter to a VHF radio using NMEA 0183, you can track vessels that send position reports.
52 GPSMAP ® 4000/5000 Series Owner ’s Manual Digital Selective Calling DSC T o show or hide the trail line for a specic vessel that is sending position reports: 1. From the Home screen, select Information > DSC List . 2. Select the vessel from the list, and then select Review .
GPSMAP ® 4000/5000 Series Owner ’s Manual 53 Appendix Appendix Appendix Specications Physical Specications Size: GPSMAP 4008: 7" H × 1 1.2" W × 4.2" D (176.9 × 284.4 × 106 mm) GPSMAP 4010: 8.9" H × 13.4" W × 4.13" D (226.
54 GPSMAP ® 4000/5000 Series Owner ’s Manual Appendix Appendix W AAS Accuracy: Position: <3 m (9.8 ft), 95% typical V elocity: 0.05 meters/second steady state Dynamics: 6 g Power Source: 10–35 Vdc Usage: GPSMAP 4008/5008: 35 W max. at 10 Vdc GPSMAP 4010/4012/5012: 40 W max at 10 Vdc GPSMAP 5015: 60 W max at 10 Vdc Fuse: 7.
GPSMAP ® 4000/5000 Series Owner ’s Manual 55 Appendix Appendix Alarms and Messages Accuracy Alarm (GPS) —the GPS accuracy has fallen outside the user-set value. AIS: Dangerous T arget —an AIS target presents a collision threat. Alarm Clock —the alarm clock has sounded.
56 GPSMAP ® 4000/5000 Series Owner ’s Manual Appendix Appendix MARP A: T arget Lost —(radar) unable to track a MARP A target any longer . NMEA Depth Is Below T ransducer —(sonar) the NMEA depth input is using the DBT sentence which does not include keel offset.
GPSMAP ® 4000/5000 Series Owner ’s Manual 57 Appendix Appendix Product Registration Help us better support you by completing our online registration today! Connect to our W eb site at http://my .garmin.com . Keep the original sales receipt, or a photocopy , in a safe place.
58 GPSMAP ® 4000/5000 Series Owner ’s Manual Appendix Appendix NMEA 0183 and NMEA 2000 The GPSMAP 4000 and GPSMAP 5000 series chartplotters can accept data from NMEA 0183 compliant devices and also from certain NMEA 2000 devices connected to an existing NMEA 2000 network on your boat.
GPSMAP ® 4000/5000 Series Owner ’s Manual 59 Index Index A A-scope 48 additional object information 8 aerial photos 18 AIS 36 alarms 34, 55 navigation 34 safe zone 36, 44 sonar 35 system 34 anchor .
60 GPSMAP ® 4000/5000 Series Owner ’s Manual Index P panning the navigation chart 7 Perspective 3D 1 1 photos 9, 17, 18 POI data 18 position format 33 position icon 7 POWER key 1 preferred devices .
.
.
.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www .garmin.com. © 2009 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Garmin 4010 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Garmin 4010 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Garmin 4010, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Garmin 4010 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Garmin 4010, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Garmin 4010.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Garmin 4010. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Garmin 4010 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
