Manuel d'utilisation / d'entretien du produit PDS5002W du fabricant Fujitsu
Aller à la page of 42
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
E-2 SAFET Y PRECA UTIONS FCC NO TICE • PDS5001W/PDS5001U: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC Rules.
E-3 English – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer ’ s instructions, and should use a mount recommended by the manufacturer .
E-4 FEA TURES This display uses a plasma display panel and is only 9.8 cm deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. V ar iety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as D VD and HDTV .
E-5 English ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-6 INS T ALLA TION T o prev ent the display ’ s internal components from o verheating, make sure that the display is installed in a well-v entilated location. Be sure to use the optional stand and the other unit when installing the display , furthermore wall-mounting unit is recommended to use for installing on the wall .
E-7 English PAR T NAMES AND FUNCTIONS Fr ont 1 P ower indicat or lamp This lamp shows the state of the po wer supply . Lit (red): Po wer OFF (stand-by) Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes dif ferently depending on the type of malfunction.
E-8 1 RGB 2 input terminal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC ’ s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. 2 RGB 1 input t er minal (RGB 1 INPUT/D VI-D) Connect this terminal to the PC ’ s display (digital RGB) output terminal or decoder (digital broadcast tuner, etc.
E-9 English Descr iption of Input T er minals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horizontal sync hronization 6 Ground 1 4 V ertical sync hronization 7 Ground 15 — 8 Ground Frame Ground mD-sub terminal (RGB2 INPUT/mD-sub) Pin No.
E-10 PAR T NAMES AND FUNCTIONS (Continued) 1 Power ON button [POWER ON] ➝ (See P . E-14.) T urns the power ON. 2 Power OFF button [POWER OFF] ➝ (See P . E-14.) T urns the power OFF . 3 RGB input mode selector button [RGB] ➝ (See P . E-15.) Switches between RGB input modes.
E-11 English PRECA UTIONS T o prevent malfunction, be sure not to apply an y form of severe shock to the remote control. T o prev ent malfunction or deformation, be sure not to allow the remote control to become wet; also, k eep it away from hot locations or heating equipment.
E-12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used v aries depending on the PC model. Contact your dealer for more information.
E-13 English Connection to PC Connection to A V equipment COMPONENT VIDEO INPUT (color dif ference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) VIDEO INPUT S-VIDEO INPUT RS-232C T o RS-2.
E-14 Select the OFF/STD-B Y switch at the STD-B Y of the displa y . When you do so, the power indicator lamp turns red. Pr ess on the r emote contr ol.
E-15 English SELECTING INPUT MODE Pr ess t o select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
E-16 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display .
E-17 English Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.
E-18 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears.
E-19 English : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) T int (5) Sharpness (6) Gamma (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.
E-20 USING THE FEA TURES MENUS • FEA TURES setup scr een has 5 options of Adjustment, Function, On Screen, Input T er minal and Others. • Options with “ ” on the right When you select an option with “ ” , press . The adjustment/setup screen for that option appears.
E-21 English Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching.
E-22 Function Specifies time before DPMS starts. Can specify the background color when specifying time. Sets up screen orbiter . Specifies input mode of highest priority . Selects display number . Selects input signal. Specifies and displays type of input signal directly .
E-23 English USING THE F ACT OR Y DEF A UL T MENU • Select F ACT OR Y DEF A UL T and execut e to r estor e the adjustment/setting made in the MENU to f actory set tings.
E-24 4 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or to select “ Tint ” .
E-25 English • Adjusting Contr ast (Contrast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lo wer contrast Press to store. • Adjusting Scr een Brightness (Br ightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store.
E-26 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
E-27 English Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -4 to +4 RGB mode RGB-PC: -150 to +150 Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -25 to +50 Decoder: -4 to +4 * On-screen information disappears if you do not take any action for about 60 seconds.
E-28 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
E-29 English • FEA TURES setup scr een has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . E-30.) On Screen Menu : Can make a display setting such as OSD, Language.
E-30 • Setting Displa y Infor mation (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press or , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.
E-31 English * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-32 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears.
E-33 English • Minimizing phosphor burn-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor-induced “ b urn-in ” . Follo w the steps below . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear .
E-34 • Assigning Numbers to Displa ys (Monitor No.) All modes When you use two or more displays, you can use a single remote control to control indi vidual displays by assigning a unique number to each of the displays. Each time you press or , one of the av ailable numbers appears in the following sequence: 0: Y ou can normally control displays.
E-35 English * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-36 INITIALIZA TION OF USER AD JUS TMENT V ALUE(F ACT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or to select “ F ACT ORY DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
E-37 English OPTIONS W all-mounting unit Horizontal: 0 ° to 15 ° mounting angle P-50WB01 (for horizontal) Hanging unit 0 ° to 15 ° mounting angle (v ariable) P-50CT01 Stand P-50TT01 * When installing an option, make sure that all installation requirements for that option (as gi ven in the rele vant instruction manual) are met.
E-38 FA CT OR Y SET TINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P .
E-39 English SPECIFICA TION Model PDS500 1W/PDS50 0 1U/PDS50 02W/PDS5002U Screen size 50" wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) Aspect ratio 16:9 (wide) W eight 45.0 kg / 99.
E-40 Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fujitsu PDS5002W c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fujitsu PDS5002W - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fujitsu PDS5002W, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fujitsu PDS5002W va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fujitsu PDS5002W, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fujitsu PDS5002W.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fujitsu PDS5002W. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fujitsu PDS5002W ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
