Manuel d'utilisation / d'entretien du produit PDS4233W du fabricant Fujitsu
Aller à la page of 46
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
E-2 SAFETY PRECAUTIONS FCC NO TICE • PDS4233W : A Class A digital de vice This equipment has been tested and found to comply with the limits for a Class A digital de vice, pursuant to Part 15 of the FCC Rules.
E-3 English – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer ’ s instructions, and should use a mount recommended by the manufacturer .
E-4 FEA TURES This display uses a plasma display panel and is only 8.5 cm deep. With its high picture quality and performance, it is perfect ly suited for multimedia applications. V ariety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as D VD and HDTV .
E-5 English ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-6 INS T ALLA TION T o prev ent the display ’ s internal components from overheating, mak e sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display .
E-7 English PAR T NAMES AND FUNCTIONS Fr ont 1 P ow er indicator lamp This lamp shows the state of the po wer supply . Lit (red): Stand-by Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes dif ferently depending on the type of malfunction.
E-8 1 Exter nal speak er output ter minal (EXT SP) Connect this terminal to the optionally a v ailable speaker . (Use a speaker with 4 to 16 Ω .) *See the speaker instruction manual for more information. 2 Sound 1 input t erminal (A UDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc.
E-9 English Descr iption of Input T er minals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horizontal sync hronization 6 Ground 1 4 V ertical sync hronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No.
E-10 PAR T NAMES AND FUNCTIONS (Continued) 1 Power ON button [POWER ON] ➝ (See P . E-14.) T urns the po wer ON. 2 Power OFF button [POWER OFF] ➝ (See P . E-14.) T urns the po wer OFF . 3 RGB input mode selector button [RGB] ➝ (See P . E-15.) Switches between RGB input modes.
E-11 English PRECA UTIONS T o prevent malfunction, be sure not to apply an y form of sev ere shock to the remote control. T o prevent malfunction or deformation, be sure not to allo w the remote control to become wet; also, keep it a way from hot locations or heating equipment.
E-12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used v aries depending on the PC model. Contact your dealer for more information.
E-13 English Connection to PC Connection to A V equipment POWER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) A UDIO2 INPUT VIDEO INPUT S-VID.
E-14 Pr ess the main pow er switch at the bott om of the displa y . When you do so, the main po wer turns ON. Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green.
English E-15 SELECTING INPUT MODE Pr ess to select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
E-16 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display .
E-17 English Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.
E-18 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switch betw een sub-menus. Each time you press or , one of the available menus appears.
English E-19 : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) T int (5) Sharpness (6) Picture Mode (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.
E-20 USING THE FEA TURES MENUS • FEA TURES setup scr een has 5 options of Adjustment, Function, On Scr een Menu, Input T er minal and Others. • Options with “ ” on the right When you select an option with “ ” , press . The adjustment/setup screen for that option appears.
English E-21 Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching.
E-22 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) DPMS (2) Audio Input (3) Screen Orbiter (for RGB) Function Specifies time before DPMS starts. Can specify the background color when specifying time. Selects audio input terminal. Sets up screen orbiter .
English E-23 Function Specifies input mode of highest priority . Selects display number . Selects input signal. Specifies and displays type of input signal directly . Sets up to display white over the entire screen. Sets up Exhibition mode. Sets up whether horizontal or vertical installation.
E-24 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or t o select “ Tint ” .
English E-25 • Adjusting Contr ast (Contrast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lo wer contrast Press to store. • Adjusting Screen Brightness (Brightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store.
E-26 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
English E-27 Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -4 to +4 RGB mode RGB-PC: -150 to +150 Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -25 to +50 Decoder: -4 to +4 * On-screen information disappears if you do not take any action for about 60 seconds.
E-28 AD JUS TING A UDIO (A UDIO MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ AUDIO ” . Each time you press or , one of the available menus appears in the following sequence: The A UDIO Menu screen will appear . Pr ess or t o select “ Balance ” .
English E-29 Adjusting T reble (T reble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected.
E-30 OTHER AD JUSTMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
English E-31 • FEA TURES setup screen has the f ollowing 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . E-32.) On Screen Menu : Can make a display setting such as OSD, Language.
E-32 • Setting Display Information (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press or , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.
English E-33 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-34 OTHER ADJUS TMENTS (FEA TURES MENU)( C ontinued) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receiv e to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears.
English E-35 • Selecting input terminals (Audio Input) All modes Y ou can use this option to select one of the two a vailable terminals to recei ve sound from input equipment. (1) Select “ Audio Input ” and press . The “ Audio Input ” selection screen will appear .
E-36 OTHER ADJUS TMENTS (FEA TURES MENU)( C ontinued) • Input mode of pr ior ity (Input Prior ity) All modes Y ou can use this option to switch between modes only when a signal is recei ved through the selected input mode terminal. Y ou cannot switch the input mode.
English E-37 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-38 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
English E-39 INITIALIZA TION OF USER ADJUS TMENT V ALUE(F ACT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or to select “ F ACT OR Y DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear.
E-40 OPTIONS W all-mounting unit V ertical: 0 ° to 5 ° mounting angle P-42WB12 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (.
English E-41 FA CT OR Y SET TINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P .
E-42 Model PDS4233W/PDS4234W Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.
English E-43 Regulation --- PDS4233W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN5.
E-44 A ction • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fujitsu PDS4233W c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fujitsu PDS4233W - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fujitsu PDS4233W, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fujitsu PDS4233W va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fujitsu PDS4233W, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fujitsu PDS4233W.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fujitsu PDS4233W. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fujitsu PDS4233W ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
