Manuel d'utilisation / d'entretien du produit P42HCA11 du fabricant Fujitsu
Aller à la page of 41
Before using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
E-2 SAFETY PRECAUTIONS IMPORT ANT INFORMA TION W ARNING: This is a Class A pr oduct. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures. W ARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NO T EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE.
E-3 English 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified ser vice per sonnel.
E-4 FEA TURES This display uses a plasma display panel and is only 8.5 cm (42 ” ) /9.8 cm (50 ” ) deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. V ariety of input signals • RGB input is compatible with mD-sub terminals and BNC terminals.
E-5 English ACCESSORIES HANDY TIPS • V iewing the screen constantly for extended per iods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42 ” )/ 1.9 m or 6.3 feet (50 ” )) from the screen and to look occasionally a wa y while wor king.
E-6 INST ALLA TION T o prev ent the display ’ s inter nal components from ov erheating , make sur e that the displa y is installed in a well-ventilated loca tion. Be sure to use the optional desktop stand, ceiling-mounting unit, w all-mounting unit and other unit w hen installing this display .
E-7 PAR T NAMES AND FUNCTIONS Front (both 42" and 50") 1 Power indicator lamp This lamp shows the state of the po wer supply . Lit (red): Power OFF (stand-b y) Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differentl y depending on the type of malfunction.
E-8 1 OFF/STD-BY switch OFF : The power indica tor lamp goes off, and the power can’t be turned on by the po wer button. The po wer is par tl y supplied. STD-BY :The po w er indicator lamp lights red, and the power can be turned on or of f by the power b utton.
E-9 6 Sound 1 input terminal (AUDIO1 INPUT) 7 Sound 2 input terminal (AUDIO2 INPUT) 8 Sound 3 input terminal (AUDIO3 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. (See P .E-30 for the selection of audio input for video inp ut.
E-10 Description of Input T erminals Pin No. Input signal Pin No. Input signal 1 Red 9 — 2 Green 10 Ground 3 Blue 11 — 4— 1 2 — 5 Ground 13 Horizontal synchronization 6 Ground 14 V ertical synchronization 7 Ground 15 — 8 Ground Frame Ground RGB1 terminal (RGB1 INPUT/mD-sub) Pin No.
E-11 1 Power ON button [POWER ON] ➝ (See P . E-16.) 2 Power OFF button [POWER OFF] ➝ (See P . E-16.) 3 RGB input mode selector button [RGB] ➝ (See P . E-17.) 4 V ideo input mode selector button [VIDEO] ➝ (See P . E-17.) 5 Wide screen selector button [WIDE] ➝ (See P .
E-12 PRECAUTIONS T o prev ent malfunction, be sure not to apply any form of se vere shock to the remote control. T o prev ent malfunction or deformation, be sure not to allo w the remote control to become wet; also, keep it a wa y from hot locat ions or heating equipment.
E-13 English Be sure to turn OFF the po wer to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of ca b le to be used varies de pending on the PC model.
E-14 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remote control Display Speaker (optional) Speaker VCR or other external components See P . VCR PC VCR • Connect the video signal cable to either the S-video input terminal or the video input terminal.
E-15 English PC • As the cable for connecting a PC dif f ers with the PC model, please consult your dealer for inf ormation on the right cable to pu rchase. T o RGB output (mD-sub) T o audio output T o audio input T o RGB1 input (mD-sub) Note • Unplug the power cor d fr om the AC outlet before you connect e xternal components.
E-16 Press on the remote control. When you do so, the po wer indicator lamp turns green. Press or to select a desired input mode. BASIC OPERA TIONS TURNING ON THE POWER Press when the power is ON. The power indicator lamp turns red. TURNING OFF THE POWER 1 2 Press to increase the v olume.
E-17 SELECTING INPUT MODE Press to select a desired input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
E-18 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are a vailable with this display .
E-19 Information Y ou may f ind dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V i sta V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Normal Displays pictures of normal size (i.
E-20 ADJUSTING PICTURES (PICTURE MENU) Press . The main menu screen will appear . Press or to select “PICTURE”. Each time you press or , one of the av aila ble menus appears in the following sequence: The PICTURE Menu screen will appear . Press or to select “T int”.
E-21 • Setting Picture Mode (Picture Mode) Can set up the picture mode. Each time you press or , one of the a vailable choices appears in the follo wing sequence: Dynamic: Suitable for watc hing a nor mal motion picture.(Standard) Real: Makes a strong contrast picture.
E-22 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear . Press or to select “ POSITION/SIZE ” . Each time you press or , one of the av aila ble menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
E-23 RGB mode -150 to +150 -12 to +25 (P42HCA10/11/12) -25 to +50 (P42VCA10/11/12, P50XCA10/11/12) * On-screen information disappears if you do not take an y action for about 60 seconds. Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right.
E-24 ADJUSTING AUDIO (AUDIO MENU) Press . The main menu screen will appear . Press or to select “ AUDIO ” . Each time you press or , one of the av ailab le menus appears in the following sequence: The A UDIO Menu screen will appear . Press or to select “ Balance ” .
E-25 Adjusting T reble (T reble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Each audio input Any v alue between -10 and +10 can be selected.
E-26 OTHER ADJUSTMENTS (FEA TURES MENU) Press . The main menu screen will appear . Press or to select “FEA TURES”. Each time you press or , one of the availa ble menus appears in the follo wing sequence: The FEA TURES Menu screen will appear . Press or to select "On Screen Menu".
E-27 • FEA TURES setup screen has the following 4 options. Adjustment : Can make a fine adjustment of pictur es suc h as Dot Clock, Clamp Position. On Screen Menu : Can make a display setting such as OSD, Language. (See P . E-28.) Input T erminal : Can make an input terminal setting such as V ideo Input.
E-28 • Setting Display Information (OSD) Y ou can use this option to select whether to display information other than menus. (Error messages are displayed re g ardless of what choice you mak e for this option.) Each time you press , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.
E-29 * On-screen information disappears if you do not take an y action for about 60 seconds. "BNC-Input" selection screen This fringe part is masked. English • Selecting BNC Input (BNC-Input) Y ou can use this option to select the signal system it will receiv e to BNC Input terminal.
E-30 OTHER ADJUSTMENTS (FEA TURES MENU)( C ontinued ) OTHERS MENU • Selecting time before DPMS starts (DPMS) Y ou can use this option to select the amount of time before the DPMS function star ts. DPMS (which stands for “display po wer mana gement signaling”) allows the display to maintain an automatic power sa ving function.
E-31 English • Minimizing phosphor burn-in (Screen Orbiter) for RGB Y ou can use this option to mov e the screen position to minimiz e phosphor -induced “ burn-in ” . Follo w the ste ps belo w . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear .
E-32 OTHER ADJUSTMENTS (FEA TURES MENU)( C ontinued ) • Assigning Numbers to Displays (Monitor No.) When you use two or more displays, you can use a single remote control to control indi vidual displays by assigning a unique number to each of the displays.
E-33 English • Setting Exhibition Mode (Exhibition Mode) Y ou can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press or , one of the av ailable choices appears in the following sequence: On Off On: Sets up Exhibition mode.
E-34 INITIALIZA TION OF USER ADJUSTMENT V ALUE (F ACTOR Y DEF AUL T) Press . The main menu screen will appear . Press or to select “ FACTOR Y DEF AUL T ” . Each time you press or , one of the av ailable menus appears in the following sequence: The F ACT OR Y DEF A UL T Menu screen will appear .
E-35 English OPTIONS W all-mounting unit 0 ° to 15 ° mounting angle P-WB4200 Hanging unit 0 ° to 15 ° mounting angle P-CT4200 Stand P-TT4200 Speaker P-42SP11 (for 42 ” ) P-50SP01 (for 50 ” ) (.
E-36 INST ALLA TION 1. T ur n the power supply switch to OFF . 2. Remove the power plug from outlet. 3. Remove the plate attached to the bottom rear of the main unit from the Video boar d unit mounting bracket (3 mm scr ew w/spring X 3). 4. Insert the V ideo board unit into the main unit slot using the guides on the sides.
E-37 English FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. T he fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P .
E-38 SPECIFICA TION Model P42VCA10W/E/A P42VCA11W/E/A P42VCA12W/E/A Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.
E-39 English Model P42HCA10W/E/A P42HCA11W/E/A P42HCA12W/E/A Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.
E-40 • Specifications and exter nal appearance may be c hange for the sake of improv ement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. Model P50XCA10W/E/A/U P50XCA11W/E/A/U P50XCA12W/E/A/U Screen size 50" wide screen: 110.
E-41 English Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fujitsu P42HCA11 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fujitsu P42HCA11 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fujitsu P42HCA11, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fujitsu P42HCA11 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fujitsu P42HCA11, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fujitsu P42HCA11.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fujitsu P42HCA11. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fujitsu P42HCA11 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
